summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2022-04-17Merge tag 'timers-urgent-2022-04-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of fixes for the timers core: - Fix the warning condition in __run_timers() which does not take into account that a CPU base (especially the deferrable base) never has a timer armed on it and therefore the next_expiry value can become stale. - Replace a WARN_ON() in the NOHZ code with a WARN_ON_ONCE() to prevent endless spam in dmesg. - Remove the double star from a comment which is not meant to be in kernel-doc format" * tag 'timers-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/sched: Fix non-kernel-doc comment tick/nohz: Use WARN_ON_ONCE() to prevent console saturation timers: Fix warning condition in __run_timers()
2022-04-17Merge tag 'smp-urgent-2022-04-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP fixes from Thomas Gleixner: "Two fixes for the SMP core: - Make the warning condition in flush_smp_call_function_queue() correct, which checked a just emptied list head for being empty instead of validating that there was no pending entry on the offlined CPU at all. - The @cpu member of struct cpuhp_cpu_state is initialized when the CPU hotplug thread for the upcoming CPU is created. That's too late because the creation of the thread can fail and then the following rollback operates on CPU0. Get rid of the CPU member and hand the CPU number to the involved functions directly" * tag 'smp-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state smp: Fix offline cpu check in flush_smp_call_function_queue()
2022-04-17Merge tag 'irq-urgent-2022-04-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix for the interrupt affinity spreading logic to take into account that there can be an imbalance between present and possible CPUs, which causes already assigned bits to be overwritten" * tag 'irq-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Consider that CPUs on nodes can be unbalanced
2022-04-16Merge tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: - avoid a double memory copy for swiotlb (Chao Gao) * tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: avoid redundant memory sync for swiotlb
2022-04-15irq_work: use kasan_record_aux_stack_noalloc() record callstackZqiang
On PREEMPT_RT kernel and KASAN is enabled. the kasan_record_aux_stack() may call alloc_pages(), and the rt-spinlock will be acquired, if currently in atomic context, will trigger warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 239, name: bootlogd Preemption disabled at: [<ffffffffbab1a531>] rt_mutex_slowunlock+0xa1/0x4e0 CPU: 3 PID: 239 Comm: bootlogd Tainted: G W 5.17.1-rt17-yocto-preempt-rt+ #105 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: __might_resched.cold+0x13b/0x173 rt_spin_lock+0x5b/0xf0 get_page_from_freelist+0x20c/0x1610 __alloc_pages+0x25e/0x5e0 __stack_depot_save+0x3c0/0x4a0 kasan_save_stack+0x3a/0x50 __kasan_record_aux_stack+0xb6/0xc0 kasan_record_aux_stack+0xe/0x10 irq_work_queue_on+0x6a/0x1c0 pull_rt_task+0x631/0x6b0 do_balance_callbacks+0x56/0x80 __balance_callbacks+0x63/0x90 rt_mutex_setprio+0x349/0x880 rt_mutex_slowunlock+0x22a/0x4e0 rt_spin_unlock+0x49/0x80 uart_write+0x186/0x2b0 do_output_char+0x2e9/0x3a0 n_tty_write+0x306/0x800 file_tty_write.isra.0+0x2af/0x450 tty_write+0x22/0x30 new_sync_write+0x27c/0x3a0 vfs_write+0x3f7/0x5d0 ksys_write+0xd9/0x180 __x64_sys_write+0x43/0x50 do_syscall_64+0x44/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix it by using kasan_record_aux_stack_noalloc() to avoid the call to alloc_pages(). Link: https://lkml.kernel.org/r/20220402142555.2699582-1-qiang1.zhang@intel.com Signed-off-by: Zqiang <qiang1.zhang@intel.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-14dma-direct: avoid redundant memory sync for swiotlbChao Gao
When we looked into FIO performance with swiotlb enabled in VM, we found swiotlb_bounce() is always called one more time than expected for each DMA read request. It turns out that the bounce buffer is copied to original DMA buffer twice after the completion of a DMA request (one is done by in dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()). But the content in bounce buffer actually doesn't change between the two rounds of copy. So, one round of copy is redundant. Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to skip the memory copy in it. This fix increases FIO 64KB sequential read throughput in a guest with swiotlb=force by 5.6%. Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Reported-by: Wang Zhaoyang1 <zhaoyang1.wang@intel.com> Reported-by: Gao Liang <liang.gao@intel.com> Signed-off-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-04-13cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_stateSteven Price
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in cpuhp_create() is too late as it is used earlier in _cpu_up(). If kzalloc_node() in __smpboot_create_thread() fails then the rollback will be done with st->cpu==0 causing CPU0 to be erroneously set to be dying, causing the scheduler to get mightily confused and throw its toys out of the pram. However the cpu number is actually available directly, so simply remove the 'cpu' member and avoid the problem in the first place. Fixes: 2ea46c6fc945 ("cpumask/hotplug: Fix cpu_dying() state tracking") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220411152233.474129-2-steven.price@arm.com
2022-04-13smp: Fix offline cpu check in flush_smp_call_function_queue()Nadav Amit
The check in flush_smp_call_function_queue() for callbacks that are sent to offline CPUs currently checks whether the queue is empty. However, flush_smp_call_function_queue() has just deleted all the callbacks from the queue and moved all the entries into a local list. This checks would only be positive if some callbacks were added in the short time after llist_del_all() was called. This does not seem to be the intention of this check. Change the check to look at the local list to which the entries were moved instead of the queue from which all the callbacks were just removed. Fixes: 8d056c48e4862 ("CPU hotplug, smp: flush any pending IPI callbacks before CPU offline") Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220319072015.1495036-1-namit@vmware.com
2022-04-11genirq/affinity: Consider that CPUs on nodes can be unbalancedRei Yamamoto
If CPUs on a node are offline at boot time, the number of nodes is different when building affinity masks for present cpus and when building affinity masks for possible cpus. This causes the following problem: In the case that the number of vectors is less than the number of nodes there are cases where bits of masks for present cpus are overwritten when building masks for possible cpus. Fix this by excluding CPUs, which are not part of the current build mask (present/possible). [ tglx: Massaged changelog and added comment ] Fixes: b82592199032 ("genirq/affinity: Spread IRQs to all available NUMA nodes") Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220331003309.10891-1-yamamoto.rei@jp.fujitsu.com
2022-04-10Merge tag 'perf_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - A couple of fixes to cgroup-related handling of perf events - A couple of fixes to event encoding on Sapphire Rapids - Pass event caps of inherited events so that perf doesn't fail wrongly at fork() - Add support for a new Raptor Lake CPU * tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Always set cpuctx cgrp when enable cgroup event perf/core: Fix perf_cgroup_switch() perf/core: Use perf_cgroup_info->active to check if cgroup is active perf/core: Don't pass task around when ctx sched in perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids perf/x86/intel: Don't extend the pseudo-encoding to GP counters perf/core: Inherit event_caps perf/x86/uncore: Add Raptor Lake uncore support perf/x86/msr: Add Raptor Lake CPU support perf/x86/cstate: Add Raptor Lake support perf/x86: Add Intel Raptor Lake support
2022-04-10Merge tag 'locking_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Allow the compiler to optimize away unused percpu accesses and change the local_lock_* macros back to inline functions - A couple of fixes to static call insn patching * tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "mm/page_alloc: mark pagesets as __maybe_unused" Revert "locking/local_lock: Make the empty local_lock_*() function a macro." x86/percpu: Remove volatile from arch_raw_cpu_ptr(). static_call: Remove __DEFINE_STATIC_CALL macro static_call: Properly initialise DEFINE_STATIC_CALL_RET0() static_call: Don't make __static_call_return0 static x86,static_call: Fix __static_call_return0 for i386
2022-04-10Merge tag 'sched_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Use the correct static key checking primitive on the IRQ exit path - Two fixes for the new forceidle balancer * tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix compile error in dynamic_irqentry_exit_cond_resched() sched: Teach the forced-newidle balancer about CPU affinity limitation. sched/core: Fix forceidle balancing
2022-04-10tick/sched: Fix non-kernel-doc commentJiapeng Chong
Fixes the following W=1 kernel build warning: kernel/time/tick-sched.c:1563: warning: This comment starts with '/**', but isn't a kernel-doc comment. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220214084739.63228-1-jiapeng.chong@linux.alibaba.com
2022-04-10tick/nohz: Use WARN_ON_ONCE() to prevent console saturationPaul Gortmaker
While running some testing on code that happened to allow the variable tick_nohz_full_running to get set but with no "possible" NOHZ cores to back up that setting, this warning triggered: if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) WARN_ON(tick_nohz_full_running); The console was overwhemled with an endless stream of one WARN per tick per core and there was no way to even see what was going on w/o using a serial console to capture it and then trace it back to this. Change it to WARN_ON_ONCE(). Fixes: 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full") Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211206145950.10927-3-paul.gortmaker@windriver.com
2022-04-09timers: Fix warning condition in __run_timers()Anna-Maria Behnsen
When the timer base is empty, base::next_expiry is set to base::clk + NEXT_TIMER_MAX_DELTA and base::next_expiry_recalc is false. When no timer is queued until jiffies reaches base::next_expiry value, the warning for not finding any expired timer and base::next_expiry_recalc is false in __run_timers() triggers. To prevent triggering the warning in this valid scenario base::timers_pending needs to be added to the warning condition. Fixes: 31cd0e119d50 ("timers: Recalculate next timer interrupt only when necessary") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20220405191732.7438-3-anna-maria@linutronix.de
2022-04-07Merge tag 'net-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - new code bugs: - mctp: correct mctp_i2c_header_create result - eth: fungible: fix reference to __udivdi3 on 32b builds - eth: micrel: remove latencies support lan8814 Previous releases - regressions: - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT - vrf: fix packet sniffing for traffic originating from ip tunnels - rxrpc: fix a race in rxrpc_exit_net() - dsa: revert "net: dsa: stop updating master MTU from master.c" - eth: ice: fix MAC address setting Previous releases - always broken: - tls: fix slab-out-of-bounds bug in decrypt_internal - bpf: support dual-stack sockets in bpf_tcp_check_syncookie - xdp: fix coalescing for page_pool fragment recycling - ovs: fix leak of nested actions - eth: sfc: - add missing xdp queue reinitialization - fix using uninitialized xdp tx_queue - eth: ice: - clear default forwarding VSI during VSI release - fix broken IFF_ALLMULTI handling - synchronize_rcu() when terminating rings - eth: qede: confirm skb is allocated before using - eth: aqc111: fix out-of-bounds accesses in RX fixup - eth: slip: fix NPD bug in sl_tx_timeout()" * tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) drivers: net: slip: fix NPD bug in sl_tx_timeout() bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets bpf: Support dual-stack sockets in bpf_tcp_check_syncookie myri10ge: fix an incorrect free for skb in myri10ge_sw_tso net: usb: aqc111: Fix out-of-bounds accesses in RX fixup qede: confirm skb is allocated before using net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n net: phy: mscc-miim: reject clause 45 register accesses net: axiemac: use a phandle to reference pcs_phy dt-bindings: net: add pcs-handle attribute net: axienet: factor out phy_node in struct axienet_local net: axienet: setup mdio unconditionally net: sfc: fix using uninitialized xdp tx_queue rxrpc: fix a race in rxrpc_exit_net() net: openvswitch: fix leak of nested actions net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address() net: openvswitch: don't send internal clone attribute to the userspace. net: micrel: Fix KS8851 Kconfig ice: clear cmd_type_offset_bsz for TX rings ice: xsk: fix VSI state check in ice_xsk_wakeup() ...
2022-04-06Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf 2022-04-06 We've added 8 non-merge commits during the last 8 day(s) which contain a total of 9 files changed, 139 insertions(+), 36 deletions(-). The main changes are: 1) rethook related fixes, from Jiri and Masami. 2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin. 3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets bpf: Support dual-stack sockets in bpf_tcp_check_syncookie bpf: selftests: Test fentry tracing a struct_ops program bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT rethook: Fix to use WRITE_ONCE() for rethook:: Handler selftests/bpf: Fix warning comparing pointer to 0 bpf: Fix sparse warnings in kprobe_multi_resolve_syms bpftool: Explicit errno handling in skeletons ==================== Link: https://lore.kernel.org/r/20220407031245.73026-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-05perf/core: Always set cpuctx cgrp when enable cgroup eventChengming Zhou
When enable a cgroup event, cpuctx->cgrp setting is conditional on the current task cgrp matching the event's cgroup, so have to do it for every new event. It brings complexity but no advantage. To keep it simple, this patch would always set cpuctx->cgrp when enable the first cgroup event, and reset to NULL when disable the last cgroup event. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220329154523.86438-5-zhouchengming@bytedance.com
2022-04-05perf/core: Fix perf_cgroup_switch()Chengming Zhou
There is a race problem that can trigger WARN_ON_ONCE(cpuctx->cgrp) in perf_cgroup_switch(). CPU1 CPU2 perf_cgroup_sched_out(prev, next) cgrp1 = perf_cgroup_from_task(prev) cgrp2 = perf_cgroup_from_task(next) if (cgrp1 != cgrp2) perf_cgroup_switch(prev, PERF_CGROUP_SWOUT) cgroup_migrate_execute() task->cgroups = ? perf_cgroup_attach() task_function_call(task, __perf_cgroup_move) perf_cgroup_sched_in(prev, next) cgrp1 = perf_cgroup_from_task(prev) cgrp2 = perf_cgroup_from_task(next) if (cgrp1 != cgrp2) perf_cgroup_switch(next, PERF_CGROUP_SWIN) __perf_cgroup_move() perf_cgroup_switch(task, PERF_CGROUP_SWOUT | PERF_CGROUP_SWIN) The commit a8d757ef076f ("perf events: Fix slow and broken cgroup context switch code") want to skip perf_cgroup_switch() when the perf_cgroup of "prev" and "next" are the same. But task->cgroups can change in concurrent with context_switch() in cgroup_migrate_execute(). If cgrp1 == cgrp2 in sched_out(), cpuctx won't do sched_out. Then task->cgroups changed cause cgrp1 != cgrp2 in sched_in(), cpuctx will do sched_in. So trigger WARN_ON_ONCE(cpuctx->cgrp). Even though __perf_cgroup_move() will be synchronized as the context switch disables the interrupt, context_switch() still can see the task->cgroups is changing in the middle, since task->cgroups changed before sending IPI. So we have to combine perf_cgroup_sched_in() into perf_cgroup_sched_out(), unified into perf_cgroup_switch(), to fix the incosistency between perf_cgroup_sched_out() and perf_cgroup_sched_in(). But we can't just compare prev->cgroups with next->cgroups to decide whether to skip cpuctx sched_out/in since the prev->cgroups is changing too. For example: CPU1 CPU2 cgroup_migrate_execute() prev->cgroups = ? perf_cgroup_attach() task_function_call(task, __perf_cgroup_move) perf_cgroup_switch(task) cgrp1 = perf_cgroup_from_task(prev) cgrp2 = perf_cgroup_from_task(next) if (cgrp1 != cgrp2) cpuctx sched_out/in ... task_function_call() will return -ESRCH In the above example, prev->cgroups changing cause (cgrp1 == cgrp2) to be true, so skip cpuctx sched_out/in. And later task_function_call() would return -ESRCH since the prev task isn't running on cpu anymore. So we would leave perf_events of the old prev->cgroups still sched on the CPU, which is wrong. The solution is that we should use cpuctx->cgrp to compare with the next task's perf_cgroup. Since cpuctx->cgrp can only be changed on local CPU, and we have irq disabled, we can read cpuctx->cgrp to compare without holding ctx lock. Fixes: a8d757ef076f ("perf events: Fix slow and broken cgroup context switch code") Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220329154523.86438-4-zhouchengming@bytedance.com
2022-04-05perf/core: Use perf_cgroup_info->active to check if cgroup is activeChengming Zhou
Since we use perf_cgroup_set_timestamp() to start cgroup time and set active to 1, then use update_cgrp_time_from_cpuctx() to stop cgroup time and set active to 0. We can use info->active directly to check if cgroup is active. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220329154523.86438-3-zhouchengming@bytedance.com
2022-04-05perf/core: Don't pass task around when ctx sched inChengming Zhou
The current code pass task around for ctx_sched_in(), only to get perf_cgroup of the task, then update the timestamp of it and its ancestors and set them to active. But we can use cpuctx->cgrp to get active perf_cgroup and its ancestors since cpuctx->cgrp has been set before ctx_sched_in(). This patch remove the task argument in ctx_sched_in() and cleanup related code. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220329154523.86438-2-zhouchengming@bytedance.com
2022-04-05perf/core: Inherit event_capsNamhyung Kim
It was reported that some perf event setup can make fork failed on ARM64. It was the case of a group of mixed hw and sw events and it failed in perf_event_init_task() due to armpmu_event_init(). The ARM PMU code checks if all the events in a group belong to the same PMU except for software events. But it didn't set the event_caps of inherited events and no longer identify them as software events. Therefore the test failed in a child process. A simple reproducer is: $ perf stat -e '{cycles,cs,instructions}' perf bench sched messaging # Running 'sched/messaging' benchmark: perf: fork(): Invalid argument The perf stat was fine but the perf bench failed in fork(). Let's inherit the event caps from the parent. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20220328200112.457740-1-namhyung@kernel.org
2022-04-05static_call: Don't make __static_call_return0 staticChristophe Leroy
System.map shows that vmlinux contains several instances of __static_call_return0(): c0004fc0 t __static_call_return0 c0011518 t __static_call_return0 c00d8160 t __static_call_return0 arch_static_call_transform() uses the middle one to check whether we are setting a call to __static_call_return0 or not: c0011520 <arch_static_call_transform>: c0011520: 3d 20 c0 01 lis r9,-16383 <== r9 = 0xc001 << 16 c0011524: 39 29 15 18 addi r9,r9,5400 <== r9 += 0x1518 c0011528: 7c 05 48 00 cmpw r5,r9 <== r9 has value 0xc0011518 here So if static_call_update() is called with one of the other instances of __static_call_return0(), arch_static_call_transform() won't recognise it. In order to work properly, global single instance of __static_call_return0() is required. Fixes: 3f2a8fc4b15d ("static_call/x86: Add __static_call_return0()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/30821468a0e7d28251954b578e5051dc09300d04.1647258493.git.christophe.leroy@csgroup.eu
2022-04-05entry: Fix compile error in dynamic_irqentry_exit_cond_resched()Sven Schnelle
kernel/entry/common.c: In function ‘dynamic_irqentry_exit_cond_resched’: kernel/entry/common.c:409:14: error: implicit declaration of function ‘static_key_unlikely’; did you mean ‘static_key_enable’? [-Werror=implicit-function-declaration] 409 | if (!static_key_unlikely(&sk_dynamic_irqentry_exit_cond_resched)) | ^~~~~~~~~~~~~~~~~~~ | static_key_enable static_key_unlikely() should be static_branch_unlikely(). Fixes: 99cf983cc8bca ("sched/preempt: Add PREEMPT_DYNAMIC using static keys") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20220330084328.1805665-1-svens@linux.ibm.com
2022-04-05sched: Teach the forced-newidle balancer about CPU affinity limitation.Sebastian Andrzej Siewior
try_steal_cookie() looks at task_struct::cpus_mask to decide if the task could be moved to `this' CPU. It ignores that the task might be in a migration disabled section while not on the CPU. In this case the task must not be moved otherwise per-CPU assumption are broken. Use is_cpu_allowed(), as suggested by Peter Zijlstra, to decide if the a task can be moved. Fixes: d2dfa17bc7de6 ("sched: Trivial forced-newidle balancer") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YjNK9El+3fzGmswf@linutronix.de
2022-04-05sched/core: Fix forceidle balancingPeter Zijlstra
Steve reported that ChromeOS encounters the forceidle balancer being ran from rt_mutex_setprio()'s balance_callback() invocation and explodes. Now, the forceidle balancer gets queued every time the idle task gets selected, set_next_task(), which is strictly too often. rt_mutex_setprio() also uses set_next_task() in the 'change' pattern: queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); However, rt_mutex_setprio() will explicitly not run this pattern on the idle task (since priority boosting the idle task is quite insane). Most other 'change' pattern users are pidhash based and would also not apply to idle. Also, the change pattern doesn't contain a __balance_callback() invocation and hence we could have an out-of-band balance-callback, which *should* trigger the WARN in rq_pin_lock() (which guards against this exact anti-pattern). So while none of that explains how this happens, it does indicate that having it in set_next_task() might not be the most robust option. Instead, explicitly queue the forceidle balancer from pick_next_task() when it does indeed result in forceidle selection. Having it here, ensures it can only be triggered under the __schedule() rq->lock instance, and hence must be ran from that context. This also happens to clean up the code a little, so win-win. Fixes: d2dfa17bc7de ("sched: Trivial forced-newidle balancer") Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: T.J. Alumbaugh <talumbau@chromium.org> Link: https://lkml.kernel.org/r/20220330160535.GN8939@worktop.programming.kicks-ass.net
2022-04-03Merge tag 'trace-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
2022-04-03Merge tag 'core-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
2022-04-03Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
2022-04-02watch_queue: Free the page array when watch_queue is dismantledEric Dumazet
Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the watch_queue is torn down") took care of the bitmap, but not the page array. BUG: memory leak unreferenced object 0xffff88810d9bc140 (size 32): comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s) hex dump (first 32 bytes): 40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmalloc_array include/linux/slab.h:621 [inline] kcalloc include/linux/slab.h:652 [inline] watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251 pipe_ioctl+0x82/0x140 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] Reported-by: syzbot+25ea042ae28f3888727a@syzkaller.appspotmail.com Fixes: c73be61cede5 ("pipe: Add general notification queue support") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20220322004654.618274-1-eric.dumazet@gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-02tracing: mark user_events as BROKENSteven Rostedt (Google)
After being merged, user_events become more visible to a wider audience that have concerns with the current API. It is too late to fix this for this release, but instead of a full revert, just mark it as BROKEN (which prevents it from being selected in make config). Then we can work finding a better API. If that fails, then it will need to be completely reverted. To not have the code silently bitrot, still allow building it with COMPILE_TEST. And to prevent the uapi header from being installed, then later changed, and then have an old distro user space see the old version, move the header file out of the uapi directory. Surround the include with CONFIG_COMPILE_TEST to the current location, but when the BROKEN tag is taken off, it will use the uapi directory, and fail to compile. This is a good way to remind us to move the header back. Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-02tracing: Move user_events.h temporarily out of include/uapiSteven Rostedt (Google)
While user_events API is under development and has been marked for broken to not let the API become fixed, move the header file out of the uapi directory. This is to prevent it from being installed, then later changed, and then have an old distro user space update with a new kernel, where applications see the user_events being available, but the old header is in place, and then they get compiled incorrectly. Also, surround the include with CONFIG_COMPILE_TEST to the current location, but when the BROKEN tag is taken off, it will use the uapi directory, and fail to compile. This is a good way to remind us to move the header back. Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02ftrace: Make ftrace_graph_is_dead() a static branchChristophe Leroy
ftrace_graph_is_dead() is used on hot paths, it just reads a variable in memory and is not worth suffering function call constraints. For instance, at entry of prepare_ftrace_return(), inlining it avoids saving prepare_ftrace_return() parameters to stack and restoring them after calling ftrace_graph_is_dead(). While at it using a static branch is even more performant and is rather well adapted considering that the returned value will almost never change. Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool by a static branch. The performance improvement is noticeable. Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02tracing: Set user_events to BROKENSteven Rostedt (Google)
After being merged, user_events become more visible to a wider audience that have concerns with the current API. It is too late to fix this for this release, but instead of a full revert, just mark it as BROKEN (which prevents it from being selected in make config). Then we can work finding a better API. If that fails, then it will need to be completely reverted. Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Link: https://lkml.kernel.org/r/20220330155835.5e1f6669@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02tracing/user_events: Remove eBPF interfacesBeau Belgrave
Remove eBPF interfaces within user_events to ensure they are fully reviewed. Link: https://lore.kernel.org/all/20220329165718.GA10381@kbox/ Link: https://lkml.kernel.org/r/20220329173051.10087-1-beaub@linux.microsoft.com Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02tracing/user_events: Hold event_mutex during dyn_event_addBeau Belgrave
Make sure the event_mutex is properly held during dyn_event_add call. This is required when adding dynamic events. Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-01dma-mapping: move pgprot_decrypted out of dma_pgprotChristoph Hellwig
pgprot_decrypted is used by AMD SME systems to allow access to memory that was set to not encrypted using set_memory_decrypted. That only happens for dma-direct memory as the IOMMU solves the addressing challenges for the encryption bit using its own remapping. Move the pgprot_decrypted call out of dma_pgprot which is also used by the IOMMU mappings and into dma-direct so that it is only used with memory that was set decrypted. Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
2022-03-31Merge tag 'net-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull more networking updates from Jakub Kicinski: "Networking fixes and rethook patches. Features: - kprobes: rethook: x86: replace kretprobe trampoline with rethook Current release - regressions: - sfc: avoid null-deref on systems without NUMA awareness in the new queue sizing code Current release - new code bugs: - vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices - eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when interface is down Previous releases - always broken: - openvswitch: correct neighbor discovery target mask field in the flow dump - wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak - rxrpc: fix call timer start racing with call destruction - rxrpc: fix null-deref when security type is rxrpc_no_security - can: fix UAF bugs around echo skbs in multiple drivers Misc: - docs: move netdev-FAQ to the 'process' section of the documentation" * tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices openvswitch: Add recirc_id to recirc warning rxrpc: fix some null-ptr-deref bugs in server_key.c rxrpc: Fix call timer start racing with call destruction net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware net: hns3: fix the concurrency between functions reading debugfs docs: netdev: move the netdev-FAQ to the process pages docs: netdev: broaden the new vs old code formatting guidelines docs: netdev: call out the merge window in tag checking docs: netdev: add missing back ticks docs: netdev: make the testing requirement more stringent docs: netdev: add a question about re-posting frequency docs: netdev: rephrase the 'should I update patchwork' question docs: netdev: rephrase the 'Under review' question docs: netdev: shorten the name and mention msgid for patch status docs: netdev: note that RFC postings are allowed any time docs: netdev: turn the net-next closed into a Warning docs: netdev: move the patch marking section up docs: netdev: minor reword docs: netdev: replace references to old archives ...
2022-03-31Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"Thomas Gleixner
Revert commit bf9ad37dc8a. It needs to be better encapsulated and generalized. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2022-03-30rethook: Fix to use WRITE_ONCE() for rethook:: HandlerMasami Hiramatsu
Since the function pointered by rethook::handler never be removed when the rethook is alive, it doesn't need to use rcu_assign_pointer() to update it. Just use WRITE_ONCE(). Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164868907688.21983.1606862921419988152.stgit@devnote2
2022-03-30bpf: Fix sparse warnings in kprobe_multi_resolve_symsJiri Olsa
Adding missing __user tags to fix sparse warnings: kernel/trace/bpf_trace.c:2370:34: warning: incorrect type in argument 2 (different address spaces) kernel/trace/bpf_trace.c:2370:34: expected void const [noderef] __user *from kernel/trace/bpf_trace.c:2370:34: got void const *usyms kernel/trace/bpf_trace.c:2376:51: warning: incorrect type in argument 2 (different address spaces) kernel/trace/bpf_trace.c:2376:51: expected char const [noderef] __user *src kernel/trace/bpf_trace.c:2376:51: got char const * kernel/trace/bpf_trace.c:2443:49: warning: incorrect type in argument 1 (different address spaces) kernel/trace/bpf_trace.c:2443:49: expected void const *usyms kernel/trace/bpf_trace.c:2443:49: got void [noderef] __user *[assigned] usyms Fixes: 0dcac2725406 ("bpf: Add multi kprobe link") Reported-by: Alexei Starovoitov <ast@kernel.org> Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220330110510.398558-1-jolsa@kernel.org
2022-03-29Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - do not zero buffer in set_memory_decrypted (Kirill A. Shutemov) - fix return value of dma-debug __setup handlers (Randy Dunlap) - swiotlb cleanups (Robin Murphy) - remove most remaining users of the pci-dma-compat.h API (Christophe JAILLET) - share the ABI header for the DMA map_benchmark with userspace (Tian Tao) - update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen) - remove CONFIG_DMA_REMAP (me) * tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: extract a common header file for map_benchmark definition dma-debug: fix return value of __setup handlers dma-mapping: remove CONFIG_DMA_REMAP media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API sparc: Remove usage of the deprecated "pci-dma-compat.h" API agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API alpha: Remove usage of the deprecated "pci-dma-compat.h" API MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK swiotlb: simplify array allocation swiotlb: tidy up includes swiotlb: simplify debugfs setup swiotlb: do not zero buffer in set_memory_decrypted()
2022-03-28kprobes: Use rethook for kretprobe if possibleMasami Hiramatsu
Use rethook for kretprobe function return hooking if the arch sets CONFIG_HAVE_RETHOOK=y. In this case, CONFIG_KRETPROBE_ON_RETHOOK is set to 'y' automatically, and the kretprobe internal data fields switches to use rethook. If not, it continues to use kretprobe specific function return hooks. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164826162556.2455864.12255833167233452047.stgit@devnote2
2022-03-28bpf: Fix maximum permitted number of arguments checkYuntao Wang
Since the m->arg_size array can hold up to MAX_BPF_FUNC_ARGS argument sizes, it's ok that nargs is equal to MAX_BPF_FUNC_ARGS. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20220324164238.1274915-1-ytcoode@gmail.com
2022-03-28fprobe: Fix sparse warning for acccessing __rcu ftrace_hashMasami Hiramatsu
Since ftrace_ops::local_hash::filter_hash field is an __rcu pointer, we have to use rcu_access_pointer() to access it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164802093635.1732982.4938094876018890866.stgit@devnote2
2022-03-28fprobe: Fix smatch type mismatch warningMasami Hiramatsu
Fix the type mismatching warning of 'rethook_node vs fprobe_rethook_node' found by Smatch. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164802092611.1732982.12268174743437084619.stgit@devnote2
2022-03-28Merge tag 'ptrace-cleanups-for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace cleanups from Eric Biederman: "This set of changes removes tracehook.h, moves modification of all of the ptrace fields inside of siglock to remove races, adds a missing permission check to ptrace.c The removal of tracehook.h is quite significant as it has been a major source of confusion in recent years. Much of that confusion was around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the semantics clearer). For people who don't know tracehook.h is a vestiage of an attempt to implement uprobes like functionality that was never fully merged, and was later superseeded by uprobes when uprobes was merged. For many years now we have been removing what tracehook functionaly a little bit at a time. To the point where anything left in tracehook.h was some weird strange thing that was difficult to understand" * tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: Remove duplicated include in ptrace.c ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE ptrace: Return the signal to continue with from ptrace_stop ptrace: Move setting/clearing ptrace_message into ptrace_stop tracehook: Remove tracehook.h resume_user_mode: Move to resume_user_mode.h resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume signal: Move set_notify_signal and clear_notify_signal into sched/signal.h task_work: Decouple TIF_NOTIFY_SIGNAL and task_work task_work: Call tracehook_notify_signal from get_signal on all architectures task_work: Introduce task_work_pending task_work: Remove unnecessary include from posix_timers.h ptrace: Remove tracehook_signal_handler ptrace: Remove arch_syscall_{enter,exit}_tracehook ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h ptrace/arm: Rename tracehook_report_syscall report_syscall ptrace: Move ptrace_report_syscall into ptrace.h
2022-03-28Merge tag 'kgdb-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb update from Daniel Thompson: "Only a single patch this cycle. Fix an obvious mistake with the kdb memory accessors. It was a stupid mistake (to/from backwards) but it has been there for a long time since many architectures tolerated it with surprisingly good grace" * tag 'kgdb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Fix the putarea helper function
2022-03-28Merge tag 'livepatching-for-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Forced transitions block only to-be-removed livepatches [Chengming] - Detect when ftrace handler could not be disabled in self-tests [David] - Calm down warning from a static analyzer [Tom] * tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Reorder to use before freeing a pointer livepatch: Don't block removal of patches that are safe to unload livepatch: Skip livepatch tests if ftrace cannot be configured
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
generated by cgit (git 2.34.1) at 2024-05-27 23:59:01 +0000