summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2021-02-13Merge branch 'for-5.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Two cgroup fixes: - fix a NULL deref when trying to poll PSI in the root cgroup - fix confusing controller parsing corner case when mounting cgroup v1 hierarchies And doc / maintainer file updates" * 'for-5.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: update PSI file description in docs cgroup: fix psi monitor for root cgroup MAINTAINERS: Update my email address MAINTAINERS: Remove stale URLs for cpuset cgroup-v1: add disabled controller check in cgroup1_parse_param()
2021-02-12Merge tag 'trace-v5.11-rc7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix buffer overflow in trace event filter. It was reported that if an trace event was larger than a page and was filtered, that it caused memory corruption. The reason is that filtered events first go into a buffer to test the filter before being written into the ring buffer. Unfortunately, this write did not check the size" * tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Check length before giving out the filter buffer
2021-02-11tracing: Check length before giving out the filter bufferSteven Rostedt (VMware)
When filters are used by trace events, a page is allocated on each CPU and used to copy the trace event fields to this page before writing to the ring buffer. The reason to use the filter and not write directly into the ring buffer is because a filter may discard the event and there's more overhead on discarding from the ring buffer than the extra copy. The problem here is that there is no check against the size being allocated when using this page. If an event asks for more than a page size while being filtered, it will get only a page, leading to the caller writing more that what was allocated. Check the length of the request, and if it is more than PAGE_SIZE minus the header default back to allocating from the ring buffer directly. The ring buffer may reject the event if its too big anyway, but it wont overflow. Link: https://lore.kernel.org/ath10k/1612839593-2308-1-git-send-email-wgong@codeaurora.org/ Cc: stable@vger.kernel.org Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events") Reported-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Another pile of networing fixes: 1) ath9k build error fix from Arnd Bergmann 2) dma memory leak fix in mediatec driver from Lorenzo Bianconi. 3) bpf int3 kprobe fix from Alexei Starovoitov. 4) bpf stackmap integer overflow fix from Bui Quang Minh. 5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from Christoph Schemmel. 6) Don't update deleted entry in xt_recent netfilter module, from Jazsef Kadlecsik. 7) Use after free in nftables, fix from Pablo Neira Ayuso. 8) Header checksum fix in flowtable from Sven Auhagen. 9) Validate user controlled length in qrtr code, from Sabyrzhan Tasbolatov. 10) Fix race in xen/netback, from Juergen Gross, 11) New device ID in cxgb4, from Raju Rangoju. 12) Fix ring locking in rxrpc release call, from David Howells. 13) Don't return LAPB error codes from x25_open(), from Xie He. 14) Missing error returns in gsi_channel_setup() from Alex Elder. 15) Get skb_copy_and_csum_datagram working properly with odd segment sizes, from Willem de Bruijn. 16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean. 17) Do teardown on probe failure in DSA, from Vladimir Oltean. 18) Fix compilation failures of txtimestamp selftest, from Vadim Fedorenko. 19) Limit rx per-napi gro queue size to fix latency regression, from Eric Dumazet. 20) dpaa_eth xdp fixes from Camelia Groza. 21) Missing txq mode update when switching CBS off, in stmmac driver, from Mohammad Athari Bin Ismail. 22) Failover pending logic fix in ibmvnic driver, from Sukadev Bhattiprolu. 23) Null deref fix in vmw_vsock, from Norbert Slusarek. 24) Missing verdict update in xdp paths of ena driver, from Shay Agroskin. 25) seq_file iteration fix in sctp from Neil Brown. 26) bpf 32-bit src register truncation fix on div/mod, from Daniel Borkmann. 27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann. 28) Fix locking in vsock_shutdown(), from Stefano Garzarella. 29) Various missing index bound checks in hns3 driver, from Yufeng Mo. 30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from Vladimir Oltean. 31) Don't mix up stp and mrp port states in bridge layer, from Horatiu Vultur. 32) Fix locking during netif_tx_disable(), from Edwin Peer" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) bpf: Fix 32 bit src register truncation on div/mod bpf: Fix verifier jmp32 pruning decision logic bpf: Fix verifier jsgt branch analysis on max bound vsock: fix locking in vsock_shutdown() net: hns3: add a check for index in hclge_get_rss_key() net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx() net: hns3: add a check for queue_id in hclge_reset_vf_queue() net: dsa: felix: implement port flushing on .phylink_mac_link_down switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state net: watchdog: hold device global xmit lock during tx disable netfilter: nftables: relax check for stateful expressions in set definition netfilter: conntrack: skip identical origin tuple in same zone only vsock/virtio: update credit only if socket is not closed net: fix iteration for sctp transport seq_files net: ena: Update XDP verdict upon failure net/vmw_vsock: improve locking in vsock_connect_timeout() net/vmw_vsock: fix NULL pointer dereference ibmvnic: Clear failover_pending if unable to schedule net: stmmac: set TxQ mode back to DCB after disabling CBS ...
2021-02-10bpf: Fix 32 bit src register truncation on div/modDaniel Borkmann
While reviewing a different fix, John and I noticed an oddity in one of the BPF program dumps that stood out, for example: # bpftool p d x i 13 0: (b7) r0 = 808464450 1: (b4) w4 = 808464432 2: (bc) w0 = w0 3: (15) if r0 == 0x0 goto pc+1 4: (9c) w4 %= w0 [...] In line 2 we noticed that the mov32 would 32 bit truncate the original src register for the div/mod operation. While for the two operations the dst register is typically marked unknown e.g. from adjust_scalar_min_max_vals() the src register is not, and thus verifier keeps tracking original bounds, simplified: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = -1 1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (b7) r1 = -1 2: R0_w=invP-1 R1_w=invP-1 R10=fp0 2: (3c) w0 /= w1 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0 3: (77) r1 >>= 32 4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0 4: (bf) r0 = r1 5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0 5: (95) exit processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 Runtime result of r0 at exit is 0 instead of expected -1. Remove the verifier mov32 src rewrite in div/mod and replace it with a jmp32 test instead. After the fix, we result in the following code generation when having dividend r1 and divisor r6: div, 64 bit: div, 32 bit: 0: (b7) r6 = 8 0: (b7) r6 = 8 1: (b7) r1 = 8 1: (b7) r1 = 8 2: (55) if r6 != 0x0 goto pc+2 2: (56) if w6 != 0x0 goto pc+2 3: (ac) w1 ^= w1 3: (ac) w1 ^= w1 4: (05) goto pc+1 4: (05) goto pc+1 5: (3f) r1 /= r6 5: (3c) w1 /= w6 6: (b7) r0 = 0 6: (b7) r0 = 0 7: (95) exit 7: (95) exit mod, 64 bit: mod, 32 bit: 0: (b7) r6 = 8 0: (b7) r6 = 8 1: (b7) r1 = 8 1: (b7) r1 = 8 2: (15) if r6 == 0x0 goto pc+1 2: (16) if w6 == 0x0 goto pc+1 3: (9f) r1 %= r6 3: (9c) w1 %= w6 4: (b7) r0 = 0 4: (b7) r0 = 0 5: (95) exit 5: (95) exit x86 in particular can throw a 'divide error' exception for div instruction not only for divisor being zero, but also for the case when the quotient is too large for the designated register. For the edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT since we always zero edx (rdx). Hence really the only protection needed is against divisor being zero. Fixes: 68fda450a7df ("bpf: fix 32-bit divide by zero") Co-developed-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-02-10bpf: Fix verifier jmp32 pruning decision logicDaniel Borkmann
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: func#0 @0 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = 808464450 1: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (b4) w4 = 808464432 2: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP808464432 R10=fp0 2: (9c) w4 %= w0 3: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 3: (66) if w4 s> 0x30303030 goto pc+0 R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 4: (7f) r0 >>= r0 5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 5: (9c) w4 %= w0 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 9: (95) exit propagating r0 from 6 to 7: safe 4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0 4: (7f) r0 >>= r0 5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0 5: (9c) w4 %= w0 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 propagating r0 7: safe propagating r0 from 6 to 7: safe processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 The underlying program was xlated as follows: # bpftool p d x i 10 0: (b7) r0 = 808464450 1: (b4) w4 = 808464432 2: (bc) w0 = w0 3: (15) if r0 == 0x0 goto pc+1 4: (9c) w4 %= w0 5: (66) if w4 s> 0x30303030 goto pc+0 6: (7f) r0 >>= r0 7: (bc) w0 = w0 8: (15) if r0 == 0x0 goto pc+1 9: (9c) w4 %= w0 10: (66) if w0 s> 0x3030 goto pc+0 11: (d6) if w0 s<= 0x303030 goto pc+1 12: (05) goto pc-1 13: (95) exit The verifier rewrote original instructions it recognized as dead code with 'goto pc-1', but reality differs from verifier simulation in that we are actually able to trigger a hang due to hitting the 'goto pc-1' instructions. Taking a closer look at the verifier analysis, the reason is that it misjudges its pruning decision at the first 'from 6 to 7: safe' occasion. What happens is that while both old/cur registers are marked as precise, they get misjudged for the jmp32 case as range_within() yields true, meaning that the prior verification path with a wider register bound could be verified successfully and therefore the current path with a narrower register bound is deemed safe as well whereas in reality it's not. R0 old/cur path's bounds compare as follows: old: smin_value=0x8000000000000000,smax_value=0x7fffffffffffffff,umin_value=0x0,umax_value=0xffffffffffffffff,var_off=(0x0; 0xffffffffffffffff) cur: smin_value=0x8000000000000000,smax_value=0x7fffffff7fffffff,umin_value=0x0,umax_value=0xffffffff7fffffff,var_off=(0x0; 0xffffffff7fffffff) old: s32_min_value=0x80000000,s32_max_value=0x00003030,u32_min_value=0x00000000,u32_max_value=0xffffffff cur: s32_min_value=0x00003031,s32_max_value=0x7fffffff,u32_min_value=0x00003031,u32_max_value=0x7fffffff The 64 bit bounds generally look okay and while the information that got propagated from 32 to 64 bit looks correct as well, it's not precise enough for judging a conditional jmp32. Given the latter only operates on subregisters we also need to take these into account as well for a range_within() probe in order to be able to prune paths. Extending the range_within() constraint to both bounds will be able to tell us that the old signed 32 bit bounds are not wider than the cur signed 32 bit bounds. With the fix in place, the program will now verify the 'goto' branch case as it should have been: [...] 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 9: (95) exit 7: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=12337,u32_min_value=12337,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 8: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 8: (30) r0 = *(u8 *)skb[808464432] BPF_LD_[ABS|IND] uses reserved fields processed 11 insns (limit 1000000) max_states_per_insn 1 total_states 1 peak_states 1 mark_read 1 The bug is quite subtle in the sense that when verifier would determine that a given branch is dead code, it would (here: wrongly) remove these instructions from the program and hard-wire the taken branch for privileged programs instead of the 'goto pc-1' rewrites which will cause hard to debug problems. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-02-10bpf: Fix verifier jsgt branch analysis on max boundDaniel Borkmann
Fix incorrect is_branch{32,64}_taken() analysis for the jsgt case. The return code for both will tell the caller whether a given conditional jump is taken or not, e.g. 1 means branch will be taken [for the involved registers] and the goto target will be executed, 0 means branch will not be taken and instead we fall-through to the next insn, and last but not least a -1 denotes that it is not known at verification time whether a branch will be taken or not. Now while the jsgt has the branch-taken case correct with reg->s32_min_value > sval, the branch-not-taken case is off-by-one when testing for reg->s32_max_value < sval since the branch will also be taken for reg->s32_max_value == sval. The jgt branch analysis, for example, gets this right. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Fixes: 4f7b3e82589e ("bpf: improve verifier branch analysis") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-02-08Merge tag 'trace-v5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix output of top level event tracing 'enable' file. When writing a tool for enabling events in the tracing system, an anomaly was discovered. The top level event 'enable' file would never show '1' when all events were enabled. The system and event 'enable' files worked as expected. The reason was because the top level event 'enable' file included the 'ftrace' tracer events, which are not controlled by the 'enable' file and would cause the output to be wrong. This appears to have been a bug since it was created" * tag 'trace-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not count ftrace events in top level enable output
2021-02-07Merge tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: "Fix a 32 vs 64-bit padding issue in the new benchmark code (Barry Song)" * tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: use u8 for reserved field in uAPI structure
2021-02-07Merge tag 'irq_urgent_for_v5.11_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Prevent device managed IRQ allocation helpers from returning IRQ 0 - A fix for MSI activation of PCI endpoints with multiple MSIs * tag 'irq_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent [devm_]irq_alloc_desc from returning irq 0 genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set
2021-02-07Merge tag 'core_urgent_for_v5.11_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull syscall entry fixes from Borislav Petkov: - For syscall user dispatch, separate prctl operation from syscall redirection range specification before the API has been made official in 5.11. - Ensure tasks using the generic syscall code do trap after returning from a syscall when single-stepping is requested. * tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Use different define for selector variable in SUD entry: Ensure trap after single-step on system call return
2021-02-07Merge tag 'timers_urgent_for_v5.11_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Borislav Petkov: "Two more timers-related fixes for v5.11: - Use a freezable workqueue for RTC sync because the sync can happen at any time and trigger suspend assertion checks in the i2c subsystem. - Correct a previous RTC validation change to check only bit 6 in register D because some Intel machines use bits 0-5" * tag 'timers_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Use freezable workqueue for RTC synchronization rtc: mc146818: Dont test for bit 0-5 in Register D
2021-02-06entry: Use different define for selector variable in SUDGabriel Krisman Bertazi
Michael Kerrisk suggested that, from an API perspective, it is a bad idea to share the PR_SYS_DISPATCH_ defines between the prctl operation and the selector variable. Therefore, define two new constants to be used by SUD's selector variable and update the corresponding documentation and test cases. While this changes the API syscall user dispatch has never been part of a Linux release, it will show up for the first time in 5.11. Suggested-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com
2021-02-06entry: Ensure trap after single-step on system call returnGabriel Krisman Bertazi
Commit 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code") introduced a bug on architectures using the generic syscall entry code, in which processes stopped by PTRACE_SYSCALL do not trap on syscall return after receiving a TIF_SINGLESTEP. The reason is that the meaning of TIF_SINGLESTEP flag is overloaded to cause the trap after a system call is executed, but since the above commit, the syscall call handler only checks for the SYSCALL_WORK flags on the exit work. Split the meaning of TIF_SINGLESTEP such that it only means single-step mode, and create a new type of SYSCALL_WORK to request a trap immediately after a syscall in single-step mode. In the current implementation, the SYSCALL_WORK flag shadows the TIF_SINGLESTEP flag for simplicity. Update x86 to flip this bit when a tracer enables single stepping. Fixes: 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kyle Huey <me@kylehuey.com> Link: https://lore.kernel.org/r/87h7mtc9pr.fsf_-_@collabora.com
2021-02-05tracing: Do not count ftrace events in top level enable outputSteven Rostedt (VMware)
The file /sys/kernel/tracing/events/enable is used to enable all events by echoing in "1", or disabling all events when echoing in "0". To know if all events are enabled, disabled, or some are enabled but not all of them, cating the file should show either "1" (all enabled), "0" (all disabled), or "X" (some enabled but not all of them). This works the same as the "enable" files in the individule system directories (like tracing/events/sched/enable). But when all events are enabled, the top level "enable" file shows "X". The reason is that its checking the "ftrace" events, which are special events that only exist for their format files. These include the format for the function tracer events, that are enabled when the function tracer is enabled, but not by the "enable" file. The check includes these events, which will always be disabled, and even though all true events are enabled, the top level "enable" file will show "X" instead of "1". To fix this, have the check test the event's flags to see if it has the "IGNORE_ENABLE" flag set, and if so, not test it. Cc: stable@vger.kernel.org Fixes: 553552ce1796c ("tracing: Combine event filter_active and enable into single flags field") Reported-by: "Yordan Karadzhov (VMware)" <y.karadz@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-05init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcovJohannes Berg
On ARCH=um, loading a module doesn't result in its constructors getting called, which breaks module gcov since the debugfs files are never registered. On the other hand, in-kernel constructors have already been called by the dynamic linker, so we can't call them again. Get out of this conundrum by allowing CONFIG_CONSTRUCTORS to be selected, but avoiding the in-kernel constructor calls. Also remove the "if !UML" from GCOV selecting CONSTRUCTORS now, since we really do want CONSTRUCTORS, just not kernel binary ones. Link: https://lkml.kernel.org/r/20210120172041.c246a2cac2fb.I1358f584b76f1898373adfed77f4462c8705b736@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jessica Yu <jeyu@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-05ntp: Use freezable workqueue for RTC synchronizationGeert Uytterhoeven
The bug fixed by commit e3fab2f3de081e98 ("ntp: Fix RTC synchronization on 32-bit platforms") revealed an underlying issue: RTC synchronization may happen anytime, even while the system is partially suspended. On systems where the RTC is connected to an I2C bus, the I2C bus controller may already or still be suspended, triggering a WARNING during suspend or resume from s2ram: WARNING: CPU: 0 PID: 124 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0x634/0x680 i2c i2c-6: Transfer while suspended [...] Workqueue: events_power_efficient sync_hw_clock [...] (__i2c_transfer) (i2c_transfer) (regmap_i2c_read) ... (da9063_rtc_set_time) (rtc_set_time) (sync_hw_clock) (process_one_work) Fix this race condition by using the freezable instead of the normal power-efficient workqueue. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20210125143039.1051912-1-geert+renesas@glider.be
2021-02-05dma-mapping: benchmark: use u8 for reserved field in uAPI structureBarry Song
The original code put five u32 before a u64 expansion[10] array. Five is odd, this will cause trouble in the extension of the structure by adding new features. This patch moves to use u8 for reserved field to avoid future alignment risk. Meanwhile, it also clears the memory of struct map_benchmark in tools, otherwise, if users use old version to run on newer kernel, the random expansion value will cause side effect on newer kernel. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-03bpf: Check for integer overflow when using roundup_pow_of_two()Bui Quang Minh
On 32-bit architecture, roundup_pow_of_two() can return 0 when the argument has upper most bit set due to resulting 1UL << 32. Add a check for this case. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210127063653.3576-1-minhquangbui99@gmail.com
2021-02-03Merge tag 'trace-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Initialize tracing-graph-pause at task creation, not start of function tracing, to avoid corrupting the pause counter. - Set "pause-on-trace" for latency tracers as that option breaks their output (regression). - Fix the wrong error return for setting kretprobes on future modules (before they are loaded). - Fix re-registering the same kretprobe. - Add missing value check for added RCU variable reload. * tag 'trace-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Fix race between tracing and removing tracepoint kretprobe: Avoid re-registration of the same kretprobe earlier tracing/kprobe: Fix to support kretprobe events on unloaded modules tracing: Use pause-on-trace with the latency tracers fgraph: Initialize tracing_graph_pause at task creation
2021-02-03bpf: Unbreak BPF_PROG_TYPE_KPROBE when kprobe is called via do_int3Alexei Starovoitov
The commit 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()") converted do_int3 handler to be "NMI-like". That made old if (in_nmi()) check abort execution of bpf programs attached to kprobe when kprobe is firing via int3 (For example when kprobe is placed in the middle of the function). Remove the check to restore user visible behavior. Fixes: 0d00449c7a28 ("x86: Replace ist_enter() with nmi_enter()") Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/20210203070636.70926-1-alexei.starovoitov@gmail.com
2021-02-02Merge tag 'dma-mapping-5.11-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: "Fix a kernel crash in the new dma-mapping benchmark test (Barry Song)" * tag 'dma-mapping-5.11-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: fix kernel crash when dma_map_single fails
2021-02-02Merge tag 'net-5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.11-rc7, including fixes from bpf and mac80211 trees. Current release - regressions: - ip_tunnel: fix mtu calculation - mlx5: fix function calculation for page trees Previous releases - regressions: - vsock: fix the race conditions in multi-transport support - neighbour: prevent a dead entry from updating gc_list - dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add Previous releases - always broken: - bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF cgroup getsockopt infra when user space is trying to race against optlen, from Loris Reiff. - bpf: add missing fput() in BPF inode storage map update helper - udp: ipv4: manipulate network header of NATed UDP GRO fraglist - mac80211: fix station rate table updates on assoc - r8169: work around RTL8125 UDP HW bug - igc: report speed and duplex as unknown when device is runtime suspended - rxrpc: fix deadlock around release of dst cached on udp tunnel" * tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary net: ipa: fix two format specifier errors net: ipa: use the right accessor in ipa_endpoint_status_skip() net: ipa: be explicit about endianness net: ipa: add a missing __iomem attribute net: ipa: pass correct dma_handle to dma_free_coherent() r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS net: mvpp2: TCAM entry enable should be written after SRAM data net: lapb: Copy the skb before sending a packet net/mlx5e: Release skb in case of failure in tc update skb net/mlx5e: Update max_opened_tc also when channels are closed net/mlx5: Fix leak upon failure of rule creation net/mlx5: Fix function calculation for page trees docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc udp: ipv4: manipulate network header of NATed UDP GRO fraglist net: ip_tunnel: fix mtu calculation vsock: fix the race conditions in multi-transport support net: sched: replaced invalid qdisc tree flush helper in qdisc_replace ibmvnic: device remove has higher precedence over reset ...
2021-01-31Merge tag 'core-urgent-2021-01-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull single stepping fix from Thomas Gleixner: "A single fix for the single step reporting regression caused by getting the condition wrong when moving SYSCALL_EMU away from TIF flags" [ There's apparently another problem too, fix pending ] * tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Unbreak single step reporting behaviour
2021-01-30genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is setMarc Zyngier
When MSI_FLAG_ACTIVATE_EARLY is set (which is the case for PCI), __msi_domain_alloc_irqs() performs the activation of the interrupt (which in the case of PCI results in the endpoint being programmed) as soon as the interrupt is allocated. But it appears that this is only done for the first vector, introducing an inconsistent behaviour for PCI Multi-MSI. Fix it by iterating over the number of vectors allocated to each MSI descriptor. This is easily achieved by introducing a new "for_each_msi_vector" iterator, together with a tiny bit of refactoring. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123122759.1781359-1-maz@kernel.org
2021-01-29kretprobe: Avoid re-registration of the same kretprobe earlierWang ShaoBo
Our system encountered a re-init error when re-registering same kretprobe, where the kretprobe_instance in rp->free_instances is illegally accessed after re-init. Implementation to avoid re-registration has been introduced for kprobe before, but lags for register_kretprobe(). We must check if kprobe has been re-registered before re-initializing kretprobe, otherwise it will destroy the data struct of kretprobe registered, which can lead to memory leak, system crash, also some unexpected behaviors. We use check_kprobe_rereg() to check if kprobe has been re-registered before running register_kretprobe()'s body, for giving a warning message and terminate registration process. Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com Cc: stable@vger.kernel.org Fixes: 1f0ab40976460 ("kprobes: Prevent re-registration of the same kprobe") [ The above commit should have been done for kretprobes too ] Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Cheng Jian <cj.chengjian@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-29Merge tag 'pm-5.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a deadlock in the 'kexec jump' code and address a possible hibernation image creation issue. Specifics: - Fix a deadlock caused by attempting to acquire the same mutex twice in a row in the "kexec jump" code (Baoquan He) - Modify the hibernation image saving code to flush the unwritten data to the swap storage later so as to avoid failing to write the image signature which is possible in some cases (Laurent Badel)" * tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: flush swap writer after marking kernel: kexec: remove the lock operation of system_transition_mutex
2021-01-29tracing/kprobe: Fix to support kretprobe events on unloaded modulesMasami Hiramatsu
Fix kprobe_on_func_entry() returns error code instead of false so that register_kretprobe() can return an appropriate error code. append_trace_kprobe() expects the kprobe registration returns -ENOENT when the target symbol is not found, and it checks whether the target module is unloaded or not. If the target module doesn't exist, it defers to probe the target symbol until the module is loaded. However, since register_kretprobe() returns -EINVAL instead of -ENOENT in that case, it always fail on putting the kretprobe event on unloaded modules. e.g. Kprobe event: /sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events [ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue. Kretprobe event: (p -> r) /sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events sh: write error: Invalid argument /sys/kernel/debug/tracing # cat error_log [ 41.122514] trace_kprobe: error: Failed to register probe event Command: r xfs:xfs_end_io ^ To fix this bug, change kprobe_on_func_entry() to detect symbol lookup failure and return -ENOENT in that case. Otherwise it returns -EINVAL or 0 (succeeded, given address is on the entry). Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly") Reported-by: Jianlin Lv <Jianlin.Lv@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-29tracing: Use pause-on-trace with the latency tracersViktor Rosendahl
Eaerlier, tracing was disabled when reading the trace file. This behavior was changed with: commit 06e0a548bad0 ("tracing: Do not disable tracing when reading the trace file"). This doesn't seem to work with the latency tracers. The above mentioned commit dit not only change the behavior but also added an option to emulate the old behavior. The idea with this patch is to enable this pause-on-trace option when the latency tracers are used. Link: https://lkml.kernel.org/r/20210119164344.37500-2-Viktor.Rosendahl@bmw.de Cc: stable@vger.kernel.org Fixes: 06e0a548bad0 ("tracing: Do not disable tracing when reading the trace file") Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-29fgraph: Initialize tracing_graph_pause at task creationSteven Rostedt (VMware)
On some archs, the idle task can call into cpu_suspend(). The cpu_suspend() will disable or pause function graph tracing, as there's some paths in bringing down the CPU that can have issues with its return address being modified. The task_struct structure has a "tracing_graph_pause" atomic counter, that when set to something other than zero, the function graph tracer will not modify the return address. The problem is that the tracing_graph_pause counter is initialized when the function graph tracer is enabled. This can corrupt the counter for the idle task if it is suspended in these architectures. CPU 1 CPU 2 ----- ----- do_idle() cpu_suspend() pause_graph_tracing() task_struct->tracing_graph_pause++ (0 -> 1) start_graph_tracing() for_each_online_cpu(cpu) { ftrace_graph_init_idle_task(cpu) task-struct->tracing_graph_pause = 0 (1 -> 0) unpause_graph_tracing() task_struct->tracing_graph_pause-- (0 -> -1) The above should have gone from 1 to zero, and enabled function graph tracing again. But instead, it is set to -1, which keeps it disabled. There's no reason that the field tracing_graph_pause on the task_struct can not be initialized at boot up. Cc: stable@vger.kernel.org Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339 Reported-by: pierre.gondois@arm.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-28Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2021-01-29 1) Fix two copy_{from,to}_user() warn_on_once splats for BPF cgroup getsockopt infra when user space is trying to race against optlen, from Loris Reiff. 2) Fix a missing fput() in BPF inode storage map update helper, from Pan Bian. 3) Fix a build error on unresolved symbols on disabled networking / keys LSM hooks, from Mikko Ylinen. 4) Fix preload BPF prog build when the output directory from make points to a relative path, from Quentin Monnet. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, preload: Fix build when $(O) points to a relative path bpf: Drop disabled LSM hooks from the sleepable set bpf, inode_storage: Put file handler if no storage was found bpf, cgroup: Fix problematic bounds check bpf, cgroup: Fix optlen WARN_ON_ONCE toctou ==================== Link: https://lore.kernel.org/r/20210129001556.6648-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28entry: Unbreak single step reporting behaviourYuxuan Shui
The move of TIF_SYSCALL_EMU to SYSCALL_WORK_SYSCALL_EMU broke single step reporting. The original code reported the single step when TIF_SINGLESTEP was set and TIF_SYSCALL_EMU was not set. The SYSCALL_WORK conversion got the logic wrong and now the reporting only happens when both bits are set. Restore the original behaviour. [ tglx: Massaged changelog and dropped the pointless double negation ] Fixes: 64eb35f701f0 ("ptrace: Migrate TIF_SYSCALL_EMU to use SYSCALL_WORK flag") Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/877do3gaq9.fsf@m5Zedd9JOGzJrf0
2021-01-27dma-mapping: benchmark: fix kernel crash when dma_map_single failsBarry Song
if dma_map_single() fails, kernel will give the below oops since task_struct has been destroyed and we are running into the memory corruption due to use-after-free in kthread_stop(): [ 48.095310] Unable to handle kernel paging request at virtual address 000000c473548040 [ 48.095736] Mem abort info: [ 48.095864] ESR = 0x96000004 [ 48.096025] EC = 0x25: DABT (current EL), IL = 32 bits [ 48.096268] SET = 0, FnV = 0 [ 48.096401] EA = 0, S1PTW = 0 [ 48.096538] Data abort info: [ 48.096659] ISV = 0, ISS = 0x00000004 [ 48.096820] CM = 0, WnR = 0 [ 48.097079] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104639000 [ 48.098099] [000000c473548040] pgd=0000000000000000, p4d=0000000000000000 [ 48.098832] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 48.099232] Modules linked in: [ 48.099387] CPU: 0 PID: 2 Comm: kthreadd Tainted: G W [ 48.099887] Hardware name: linux,dummy-virt (DT) [ 48.100078] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 48.100516] pc : __kmalloc_node+0x214/0x368 [ 48.100944] lr : __kmalloc_node+0x1f4/0x368 [ 48.101458] sp : ffff800011f0bb80 [ 48.101843] x29: ffff800011f0bb80 x28: ffff0000c0098ec0 [ 48.102330] x27: 0000000000000000 x26: 00000000001d4600 [ 48.102648] x25: ffff0000c0098ec0 x24: ffff800011b6a000 [ 48.102988] x23: 00000000ffffffff x22: ffff0000c0098ec0 [ 48.103333] x21: ffff8000101d7a54 x20: 0000000000000dc0 [ 48.103657] x19: ffff0000c0001e00 x18: 0000000000000000 [ 48.104069] x17: 0000000000000000 x16: 0000000000000000 [ 48.105449] x15: 000001aa0304e7b9 x14: 00000000000003b1 [ 48.106401] x13: ffff8000122d5000 x12: ffff80001228d000 [ 48.107296] x11: ffff0000c0154340 x10: 0000000000000000 [ 48.107862] x9 : ffff80000fffffff x8 : ffff0000c473527f [ 48.108326] x7 : ffff800011e62f58 x6 : ffff0000c01c8ed8 [ 48.108778] x5 : ffff0000c0098ec0 x4 : 0000000000000000 [ 48.109223] x3 : 00000000001d4600 x2 : 0000000000000040 [ 48.109656] x1 : 0000000000000001 x0 : ff0000c473548000 [ 48.110104] Call trace: [ 48.110287] __kmalloc_node+0x214/0x368 [ 48.110493] __vmalloc_node_range+0xc4/0x298 [ 48.110805] copy_process+0x2c8/0x15c8 [ 48.111133] kernel_clone+0x5c/0x3c0 [ 48.111373] kernel_thread+0x64/0x90 [ 48.111604] kthreadd+0x158/0x368 [ 48.111810] ret_from_fork+0x10/0x30 [ 48.112336] Code: 17ffffe9 b9402a62 b94008a1 11000421 (f8626802) [ 48.112884] ---[ end trace d4890e21e75419d5 ]--- Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-26bpf, preload: Fix build when $(O) points to a relative pathQuentin Monnet
Building the kernel with CONFIG_BPF_PRELOAD, and by providing a relative path for the output directory, may fail with the following error: $ make O=build bindeb-pkg ... /.../linux/tools/scripts/Makefile.include:5: *** O=build does not exist. Stop. make[7]: *** [/.../linux/kernel/bpf/preload/Makefile:9: kernel/bpf/preload/libbpf.a] Error 2 make[6]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf/preload] Error 2 make[5]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf] Error 2 make[4]: *** [/.../linux/Makefile:1799: kernel] Error 2 make[4]: *** Waiting for unfinished jobs.... In the case above, for the "bindeb-pkg" target, the error is produced by the "dummy" check in Makefile.include, called from libbpf's Makefile. This check changes directory to $(PWD) before checking for the existence of $(O). But at this step we have $(PWD) pointing to "/.../linux/build", and $(O) pointing to "build". So the Makefile.include tries in fact to assert the existence of a directory named "/.../linux/build/build", which does not exist. Note that the error does not occur for all make targets and architectures combinations. This was observed on x86 for "bindeb-pkg", or for a regular build for UML [0]. Here are some details. The root Makefile recursively calls itself once, after changing directory to $(O). The content for the variable $(PWD) is preserved across recursive calls to make, so it is unchanged at this step. For "bindeb-pkg", $(PWD) is eventually updated because the target writes a new Makefile (as debian/rules) and calls it indirectly through dpkg-buildpackage. This script does not preserve $(PWD), which is reset to the current working directory when the target in debian/rules is called. Although not investigated, it seems likely that something similar causes UML to change its value for $(PWD). Non-trivial fixes could be to remove the use of $(PWD) from the "dummy" check, or to make sure that $(PWD) and $(O) are preserved or updated to always play well and form a valid $(PWD)/$(O) path across the different targets and architectures. Instead, we take a simpler approach and just update $(O) when calling libbpf's Makefile, so it points to an absolute path which should always resolve for the "dummy" check run (through includes) by that Makefile. David Gow previously posted a slightly different version of this patch as a RFC [0], two months ago or so. [0] https://lore.kernel.org/bpf/20201119085022.3606135-1-davidgow@google.com/t/#u Fixes: d71fa5c9763c ("bpf: Add kernel module with user mode driver that populates bpffs.") Reported-by: David Gow <davidgow@google.com> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/bpf/20210126161320.24561-1-quentin@isovalent.com
2021-01-26bpf: Drop disabled LSM hooks from the sleepable setMikko Ylinen
Some networking and keys LSM hooks are conditionally enabled and when building the new sleepable BPF LSM hooks with those LSM hooks disabled, the following build error occurs: BTFIDS vmlinux FAILED unresolved symbol bpf_lsm_socket_socketpair To fix the error, conditionally add the relevant networking/keys LSM hooks to the sleepable set. Fixes: 423f16108c9d8 ("bpf: Augment the set of sleepable LSM hooks") Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20210125063936.89365-1-mikko.ylinen@linux.intel.com
2021-01-26futex: Handle faults correctly for PI futexesThomas Gleixner
fixup_pi_state_owner() tries to ensure that the state of the rtmutex, pi_state and the user space value related to the PI futex are consistent before returning to user space. In case that the user space value update faults and the fault cannot be resolved by faulting the page in via fault_in_user_writeable() the function returns with -EFAULT and leaves the rtmutex and pi_state owner state inconsistent. A subsequent futex_unlock_pi() operates on the inconsistent pi_state and releases the rtmutex despite not owning it which can corrupt the RB tree of the rtmutex and cause a subsequent kernel stack use after free. It was suggested to loop forever in fixup_pi_state_owner() if the fault cannot be resolved, but that results in runaway tasks which is especially undesired when the problem happens due to a programming error and not due to malice. As the user space value cannot be fixed up, the proper solution is to make the rtmutex and the pi_state consistent so both have the same owner. This leaves the user space value out of sync. Any subsequent operation on the futex will fail because the 10th rule of PI futexes (pi_state owner and user space value are consistent) has been violated. As a consequence this removes the inept attempts of 'fixing' the situation in case that the current task owns the rtmutex when returning with an unresolvable fault by unlocking the rtmutex which left pi_state::owner and rtmutex::owner out of sync in a different and only slightly less dangerous way. Fixes: 1b7558e457ed ("futexes: fix fault handling in futex_lock_pi") Reported-by: gzobqq@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2021-01-26futex: Simplify fixup_pi_state_owner()Thomas Gleixner
Too many gotos already and an upcoming fix would make it even more unreadable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2021-01-26futex: Use pi_state_update_owner() in put_pi_state()Thomas Gleixner
No point in open coding it. This way it gains the extra sanity checks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2021-01-26rtmutex: Remove unused argument from rt_mutex_proxy_unlock()Thomas Gleixner
Nothing uses the argument. Remove it as preparation to use pi_state_update_owner(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2021-01-26futex: Provide and use pi_state_update_owner()Thomas Gleixner
Updating pi_state::owner is done at several places with the same code. Provide a function for it and use that at the obvious places. This is also a preparation for a bug fix to avoid yet another copy of the same code or alternatively introducing a completely unpenetratable mess of gotos. Originally-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2021-01-26futex: Replace pointless printk in fixup_owner()Thomas Gleixner
If that unexpected case of inconsistent arguments ever happens then the futex state is left completely inconsistent and the printk is not really helpful. Replace it with a warning and make the state consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2021-01-26futex: Ensure the correct return value from futex_lock_pi()Thomas Gleixner
In case that futex_lock_pi() was aborted by a signal or a timeout and the task returned without acquiring the rtmutex, but is the designated owner of the futex due to a concurrent futex_unlock_pi() fixup_owner() is invoked to establish consistent state. In that case it invokes fixup_pi_state_owner() which in turn tries to acquire the rtmutex again. If that succeeds then it does not propagate this success to fixup_owner() and futex_lock_pi() returns -EINTR or -ETIMEOUT despite having the futex locked. Return success from fixup_pi_state_owner() in all cases where the current task owns the rtmutex and therefore the futex and propagate it correctly through fixup_owner(). Fixup the other callsite which does not expect a positive return value. Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2021-01-25Merge tag 'printk-for-5.11-urgent-fixup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fix from Petr Mladek: "The fix of a potential buffer overflow in 5.11-rc5 introduced another one. The trailing '\0' might be written up to the message "len" past the buffer. Fortunately, it is not that easy to hit. Most readers use 1kB buffers for a single message. Typical messages fit into the temporary buffer with enough reserve. Also readers do not rely on the '\0'. It is related to the previous fix. Some readers required the space for the trailing '\0'. We decided to write it there to avoid such regressions in the future. The most realistic victims are dumpers using kmsg_dump_get_buffer(). They are filling the entire buffer with as many messages as possible. They are typically used when handling panic()" * tag 'printk-for-5.11-urgent-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: fix string termination for record_print_text()
2021-01-25PM: hibernate: flush swap writer after markingLaurent Badel
Flush the swap writer after, not before, marking the files, to ensure the signature is properly written. Fixes: 6f612af57821 ("PM / Hibernate: Group swap ops") Signed-off-by: Laurent Badel <laurentbadel@eaton.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-25kernel: kexec: remove the lock operation of system_transition_mutexBaoquan He
Function kernel_kexec() is called with lock system_transition_mutex held in reboot system call. While inside kernel_kexec(), it will acquire system_transition_mutex agin. This will lead to dead lock. The dead lock should be easily triggered, it hasn't caused any failure report just because the feature 'kexec jump' is almost not used by anyone as far as I know. An inquiry can be made about who is using 'kexec jump' and where it's used. Before that, let's simply remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope. Fixes: 55f2503c3b69 ("PM / reboot: Eliminate race between reboot and suspend") Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Pingfan Liu <kernelfans@gmail.com> Cc: 4.19+ <stable@vger.kernel.org> # 4.19+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-25Merge branch 'printk-rework' into for-linusPetr Mladek
2021-01-25printk: fix string termination for record_print_text()John Ogness
Commit f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()") added string termination in record_print_text(). However it used the wrong base pointer for adding the terminator. This led to a 0-byte being written somewhere beyond the buffer. Use the correct base pointer when adding the terminator. Fixes: f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()") Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
2021-01-24Merge tag 'irq_urgent_for_v5.11_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy. - Fix to not lose IPIs on bcm2836. - Fix for a bogus marking of ITS devices as shared due to unitialized stack variable. - Clear a phantom interrupt on qcom-pdc to unblock suspend. - Small cleanups, warning and build fixes. * tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export irq_check_status_bit() irqchip/mips-cpu: Set IPI domain parent chip irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig irqchip/loongson-liointc: Fix build warnings driver core: platform: Add extra error check in devm_platform_get_irqs_affinity() irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq irqchip/irq-sl28cpld: Convert comma to semicolon genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()
2021-01-24Merge tag 'sched_urgent_for_v5.11_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Correct the marking of kthreads which are supposed to run on a specific, single CPU vs such which are affine to only one CPU, mark per-cpu workqueue threads as such and make sure that marking "survives" CPU hotplug. Fix CPU hotplug issues with such kthreads. - A fix to not push away tasks on CPUs coming online. - Have workqueue CPU hotplug code use cpu_possible_mask when breaking affinity on CPU offlining so that pending workers can finish on newly arrived onlined CPUs too. - Dump tasks which haven't vacated a CPU which is currently being unplugged. - Register a special scale invariance callback which gets called on resume from RAM to read out APERF/MPERF after resume and thus make the schedutil scaling governor more precise. * tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Relax the set_cpus_allowed_ptr() semantics sched: Fix CPU hotplug / tighten is_per_cpu_kthread() sched: Prepare to use balance_push in ttwu() workqueue: Restrict affinity change to rescuer workqueue: Tag bound workers with KTHREAD_IS_PER_CPU kthread: Extract KTHREAD_IS_PER_CPU sched: Don't run cpu-online with balance_push() enabled workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity sched/core: Print out straggler tasks in sched_cpu_dying() x86: PM: Register syscore_ops for scale invariance
2021-01-24Merge tag 'timers_urgent_for_v5.11_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Borislav Petkov: - Fix an integer overflow in the NTP RTC synchronization which led to the latter happening every 2 seconds instead of the intended every 11 minutes. - Get rid of now unused get_seconds(). * tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Fix RTC synchronization on 32-bit platforms timekeeping: Remove unused get_seconds()
generated by cgit (git 2.34.1) at 2024-06-04 13:03:32 +0000