| Age | Commit message (Collapse) | Author |
|---|
|
This fixes a build error when CONFIG_FAULT_INJECTION_CONFIGFS=y and
CONFIG_CONFIGFS_FS=m.
Since the fault-injection library cannot built as a module, avoid building
configfs as a module.
Fixes: 4668c7a2940d ("fault-inject: allow configuration via configfs")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304150025.K0hczLR4-lkp@intel.com/
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This provides a helper function to allow configuration of fault-injection
for configfs-based drivers.
The config items created by this function have the same interface as the
one created under debugfs by fault_create_debugfs_attr().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20230327143733.14599-2-akinobu.mita@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On big systems, the mm refcount can become highly contented when doing a
lot of context switching with threaded applications. user<->idle switch
is one of the important cases. Abandoning lazy tlb entirely slows this
switching down quite a bit in the common uncontended case, so that is not
viable.
Implement a scheme where lazy tlb mm references do not contribute to the
refcount, instead they get explicitly removed when the refcount reaches
zero.
The final mmdrop() sends IPIs to all CPUs in the mm_cpumask and they
switch away from this mm to init_mm if it was being used as the lazy tlb
mm. Enabling the shoot lazies option therefore requires that the arch
ensures that mm_cpumask contains all CPUs that could possibly be using mm.
A DEBUG_VM option IPIs every CPU in the system after this to ensure there
are no references remaining before the mm is freed.
Shootdown IPIs cost could be an issue, but they have not been observed to
be a serious problem with this scheme, because short-lived processes tend
not to migrate CPUs much, therefore they don't get much chance to leave
lazy tlb mm references on remote CPUs. There are a lot of options to
reduce them if necessary, described in comments.
The near-worst-case can be benchmarked with will-it-scale:
context_switch1_threads -t $(($(nproc) / 2))
This will create nproc threads (nproc / 2 switching pairs) all sharing the
same mm that spread over all CPUs so each CPU does thread->idle->thread
switching.
[ Rik came up with basically the same idea a few years ago, so credit
to him for that. ]
Link: https://lore.kernel.org/linux-mm/20230118080011.2258375-1-npiggin@gmail.com/
Link: https://lore.kernel.org/all/20180728215357.3249-11-riel@surriel.com/
Link: https://lkml.kernel.org/r/20230203071837.1136453-5-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We can see the following definition in kernel/locking/lockdep_internals.h:
#define STACK_TRACE_HASH_SIZE (1 << CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS)
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS is related with STACK_TRACE_HASH_SIZE
instead of MAX_STACK_TRACE_ENTRIES, fix it.
Link: https://lkml.kernel.org/r/1679380508-20830-1-git-send-email-yangtiezhu@loongson.cn
Fixes: 5dc33592e955 ("lockdep: Allow tuning tracing capacity constants.")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The path for SCHED_DEBUG is /sys/kernel/debug/sched. So, SCHED_DEBUG
should depend on DEBUG_FS, not PROC_FS.
Link: https://lkml.kernel.org/r/202301291110098787982@zte.com.cn
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The csd_debug kernel parameter works well, but is inconvenient in cases
where it is more closely associated with boot loaders or automation than
with a particular kernel version or release. Thererfore, provide a new
CSD_LOCK_WAIT_DEBUG_DEFAULT Kconfig option that defaults csd_debug to
1 when selected and 0 otherwise, with this latter being the default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230321005516.50558-1-paulmck@kernel.org
|
|
Allow to enforce 64 byte function alignment like it is possible for a
couple of other architectures. This may or may not be helpful for
debugging performance problems, as described with the Kconfig option.
Since the kernel works also with 64 byte function alignment there is
no reason for not allowing to enforce this function alignment.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
- add Function Redirection API to isolate the code being tested from
other parts of the kernel.
Documentation/dev-tools/kunit/api/functionredirection.rst has the
details.
* tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Add printf attribute to fail_current_test_impl
lib/hashtable_test.c: add test for the hashtable structure
Documentation: Add Function Redirection API docs
kunit: Expose 'static stub' API to redirect functions
kunit: Add "hooks" to call into KUnit when it's built as a module
kunit: kunit.py extract handlers
tools/testing/kunit/kunit.py: remove redundant double check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull x86 NMI diagnostics from Paul McKenney:
"Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs
on the one hand and failing hardware on the other"
* tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
x86/nmi: Print reasons why backtrace NMIs are ignored
x86/nmi: Accumulate NMI-progress evidence in exc_nmi()
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
|
|
net/devlink/leftover.c / net/core/devlink.c:
565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
f05bd8ebeb69 ("devlink: move code to a dedicated directory")
687125b5799c ("devlink: split out core code")
https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a KUnit test for the kernel hashtable implementation in
include/linux/hashtable.h.
Note that this version does not yet test each of the rcu
alternative versions of functions.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
|
|
In workloads where this_cpu operations are frequently performed,
enabling DEBUG_PREEMPT may result in significant increase in
runtime overhead due to frequent invocation of
__this_cpu_preempt_check() function.
This can be demonstrated through benchmarks such as hackbench where this
configuration results in a 10% reduction in performance, primarily due to
the added overhead within memcg charging path.
Therefore, do not to enable DEBUG_PREEMPT by default and make users aware
of its potential impact on performance in some workloads.
hackbench-process-sockets
debug_preempt no_debug_preempt
Amean 1 0.4743 ( 0.00%) 0.4295 * 9.45%*
Amean 4 1.4191 ( 0.00%) 1.2650 * 10.86%*
Amean 7 2.2677 ( 0.00%) 2.0094 * 11.39%*
Amean 12 3.6821 ( 0.00%) 3.2115 * 12.78%*
Amean 21 6.6752 ( 0.00%) 5.7956 * 13.18%*
Amean 30 9.6646 ( 0.00%) 8.5197 * 11.85%*
Amean 48 15.3363 ( 0.00%) 13.5559 * 11.61%*
Amean 79 24.8603 ( 0.00%) 22.0597 * 11.27%*
Amean 96 30.1240 ( 0.00%) 26.8073 * 11.01%*
Link: https://lkml.kernel.org/r/20230121033942.350387-1-42.hyeyoo@gmail.com
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ben Segall <bsegall@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When working on SoC bring-up, (a full) userspace may not be available,
making it hard to benchmark the CPU performance of the system under
development. Still, one may want to have a rough idea of the (relative)
performance of one or more CPU cores, especially when working on e.g. the
clock driver that controls the CPU core clock(s).
Hence make the classical Dhrystone 2.1 benchmark available as a Linux
kernel test module, based on[1].
When built-in, this benchmark can be run without any userspace present.
Parallel runs (run on multiple CPU cores) are supported, just kick the
"run" file multiple times.
Note that the actual figures depend on the configuration options that
control compiler optimization (e.g. CONFIG_CC_OPTIMIZE_FOR_SIZE vs.
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE), and on the compiler options used when
building the kernel in general. Hence numbers may differ from those
obtained by running similar benchmarks in userspace.
[1] https://github.com/qris/dhrystone-deb.git
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/4d07ad990740a5f1e426ce4566fb514f60ec9bdd.1670509558.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
[geert+renesas@glider.be: fix uninitialized use of ret]
Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2212190857310.137329@ramsan.of.borg
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Have the kmemleak's source code and Kconfig items be in the same directory.
Link: https://lkml.kernel.org/r/1674091345-14799-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: ke.wang <ke.wang@unisoc.com>
Cc: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
net/core/gro.c
7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO")
b1a78b9b9886 ("net: add support for ipv4 big tcp")
https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The correct file path for SCHED_DEBUG is /sys/kernel/debug/sched.
Link: https://lkml.kernel.org/r/202301291013573466558@zte.com.cn
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Mirsad report the below error which is caused by stack_depot_init()
failure in kvcalloc. Solve this by having stackdepot use
stack_depot_early_init().
On 1/4/23 17:08, Mirsad Goran Todorovac wrote:
I hate to bring bad news again, but there seems to be a problem with the output of /sys/kernel/debug/kmemleak:
[root@pc-mtodorov ~]# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff951c118568b0 (size 16):
comm "kworker/u12:2", pid 56, jiffies 4294893952 (age 4356.548s)
hex dump (first 16 bytes):
6d 65 6d 73 74 69 63 6b 30 00 00 00 00 00 00 00 memstick0.......
backtrace:
[root@pc-mtodorov ~]#
Apparently, backtrace of called functions on the stack is no longer
printed with the list of memory leaks. This appeared on Lenovo desktop
10TX000VCR, with AlmaLinux 8.7 and BIOS version M22KT49A (11/10/2022) and
6.2-rc1 and 6.2-rc2 builds. This worked on 6.1 with the same
CONFIG_KMEMLEAK=y and MGLRU enabled on a vanilla mainstream kernel from
Mr. Torvalds' tree. I don't know if this is deliberate feature for some
reason or a bug. Please find attached the config, lshw and kmemleak
output.
[vbabka@suse.cz: remove stack_depot_init() call]
Link: https://lore.kernel.org/all/5272a819-ef74-65ff-be61-4d2d567337de@alu.unizg.hr/
Link: https://lkml.kernel.org/r/1674091345-14799-2-git-send-email-zhaoyang.huang@unisoc.com
Fixes: 56a61617dd22 ("mm: use stack_depot for recording kmemleak's backtrace")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: ke.wang <ke.wang@unisoc.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST
- Reorganize gcc-plugin includes for GCC 13
- Silence bcache memcpy run-time false positive warnings
* tag 'hardening-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
bcache: Silence memcpy() run-time false positive warnings
gcc-plugins: Reorganize gimple includes for GCC 13
kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST
|
|
Since the long memcpy tests may stall a system for tens of seconds
in virtualized architecture environments, split those tests off under
CONFIG_MEMCPY_SLOW_KUNIT_TEST so they can be separately disabled.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20221226195206.GA2626419@roeck-us.net
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Fix spelling in lib/ Kconfig files.
(reported by codespell)
Link: https://lkml.kernel.org/r/20230124181655.16269-1-rdunlap@infradead.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
CPUs ignoring NMIs is often a sign of those CPUs going bad, but there
are quite a few other reasons why a CPU might ignore NMIs. Therefore,
accumulate evidence within exc_nmi() as to what might be preventing a
given CPU from responding to an NMI.
[ paulmck: Apply Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
|
|
Documentation/Kconfig is already included from top-level, avoid
including it again from lib/Kconfig.debug.
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230114-doc-v2-1-853a8434ac95@pefoley.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Version 1.24 of pahole has the capability to exclude compilation units (CUs)
of specific languages [1] [2]. Rust, as of writing, is not currently supported
by pahole and if it's used with a build that has BTF debugging enabled it
results in malformed kernel and module binaries [3]. So it's better for pahole
to exclude Rust CUs until support for it arrives.
Co-developed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=49358dfe2aaae4e90b072332c3e324019826783f [1]
Link: https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=8ee363790b7437283c53090a85a9fec2f0b0fbc4 [2]
Link: https://github.com/Rust-for-Linux/linux/issues/735 [3]
Link: https://lore.kernel.org/bpf/20230111152050.559334-1-yakoyoku@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
buildtar: fix tarballs with EFI_ZBOOT enabled
modpost: Include '.text.*' in TEXT_SECTIONS
padata: Mark padata_work_init() as __ref
kbuild: ensure Make >= 3.82 is used
kbuild: refactor the prerequisites of the modpost rule
kbuild: change module.order to list *.o instead of *.ko
kbuild: use .NOTINTERMEDIATE for future GNU Make versions
kconfig: refactor Makefile to reduce process forks
kbuild: add read-file macro
kbuild: do not sort after reading modules.order
kbuild: add test-{ge,gt,le,lt} macros
Documentation: raise minimum supported version of binutils to 2.25
kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
kbuild: Port silent mode detection to future gnu make.
init/version.c: remove #include <generated/utsrelease.h>
firmware_loader: remove #include <generated/utsrelease.h>
modpost: Mark uuid_le type to be suitable only for MEI
kbuild: add ability to make source rpm buildable using koji
kbuild: warn objects shared among multiple modules
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull fault-injection updates from Andrew Morton:
"Some fault-injection improvements from Wei Yongjun which enable
stacktrace filtering on x86_64"
* tag 'mm-nonmm-stable-2022-12-17-20-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fault-injection: make stacktrace filter works as expected
fault-injection: make some stack filter attrs more readable
fault-injection: skip stacktrace filtering by default
fault-injection: allow stacktrace filter for x86-64
|
|
This patchset allow fault injection to run on x86_64 and makes stacktrace
filter work as expected. With this, we can test a device driver module
with fault injection more easily.
This patch (of 4):
FAULT_INJECTION_STACKTRACE_FILTER option was apparently disallowed on
x86_64 because of problems with the stack unwinder:
commit 6d690dcac92a84f98fd774862628ff871b713660
Author: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat May 12 10:36:53 2007 -0700
fault injection: disable stacktrace filter for x86-64
However, there is no problems whatsoever with this today. Let's allow
it again.
Link: https://lkml.kernel.org/r/20220817080332.1052710-1-weiyongjun1@huawei.com
Link: https://lkml.kernel.org/r/20220817080332.1052710-2-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Using stack_depot to record kmemleak's backtrace which has been
implemented on slub for reducing redundant information.
[akpm@linux-foundation.org: fix build - remove now-unused __save_stack_trace()]
[zhaoyang.huang@unisoc.com: v3]
Link: https://lkml.kernel.org/r/1667101354-4669-1-git-send-email-zhaoyang.huang@unisoc.com
[akpm@linux-foundation.org: fix v3 layout oddities]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/1666864224-27541-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: ke.wang <ke.wang@unisoc.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhaoyang Huang <huangzhaoyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Add the call depth tracking mitigation for Retbleed which has been
long in the making. It is a lighterweight software-only fix for
Skylake-based cores where enabling IBRS is a big hammer and causes a
significant performance impact.
What it basically does is, it aligns all kernel functions to 16 bytes
boundary and adds a 16-byte padding before the function, objtool
collects all functions' locations and when the mitigation gets
applied, it patches a call accounting thunk which is used to track
the call depth of the stack at any time.
When that call depth reaches a magical, microarchitecture-specific
value for the Return Stack Buffer, the code stuffs that RSB and
avoids its underflow which could otherwise lead to the Intel variant
of Retbleed.
This software-only solution brings a lot of the lost performance
back, as benchmarks suggest:
https://lore.kernel.org/all/20220915111039.092790446@infradead.org/
That page above also contains a lot more detailed explanation of the
whole mechanism
- Implement a new control flow integrity scheme called FineIBT which is
based on the software kCFI implementation and uses hardware IBT
support where present to annotate and track indirect branches using a
hash to validate them
- Other misc fixes and cleanups
* tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
x86/paravirt: Use common macro for creating simple asm paravirt functions
x86/paravirt: Remove clobber bitmask from .parainstructions
x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al
x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit
x86/Kconfig: Enable kernel IBT by default
x86,pm: Force out-of-line memcpy()
objtool: Fix weak hole vs prefix symbol
objtool: Optimize elf_dirty_reloc_sym()
x86/cfi: Add boot time hash randomization
x86/cfi: Boot time selection of CFI scheme
x86/ibt: Implement FineIBT
objtool: Add --cfi to generate the .cfi_sites section
x86: Add prefix symbols for function padding
objtool: Add option to generate prefix symbols
objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
objtool: Slice up elf_create_section_symbol()
kallsyms: Revert "Take callthunks into account"
x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces
x86/retpoline: Fix crash printing warning
x86/paravirt: Fix a !PARAVIRT build warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
|
|
Pull rust updates from Miguel Ojeda:
"The first set of changes after the merge, the major ones being:
- String and formatting: new types 'CString', 'CStr', 'BStr' and
'Formatter'; new macros 'c_str!', 'b_str!' and 'fmt!'.
- Errors: the rest of the error codes from 'errno-base.h', as well as
some 'From' trait implementations for the 'Error' type.
- Printing: the rest of the 'pr_*!' levels and the continuation one
'pr_cont!', as well as a new sample.
- 'alloc' crate: new constructors 'try_with_capacity()' and
'try_with_capacity_in()' for 'RawVec' and 'Vec'.
- Procedural macros: new macros '#[vtable]' and 'concat_idents!', as
well as better ergonomics for 'module!' users.
- Asserting: new macros 'static_assert!', 'build_error!' and
'build_assert!', as well as a new crate 'build_error' to support
them.
- Vocabulary types: new types 'Opaque' and 'Either'.
- Debugging: new macro 'dbg!'"
* tag 'rust-6.2' of https://github.com/Rust-for-Linux/linux: (28 commits)
rust: types: add `Opaque` type
rust: types: add `Either` type
rust: build_assert: add `build_{error,assert}!` macros
rust: add `build_error` crate
rust: static_assert: add `static_assert!` macro
rust: std_vendor: add `dbg!` macro based on `std`'s one
rust: str: add `fmt!` macro
rust: str: add `CString` type
rust: str: add `Formatter` type
rust: str: add `c_str!` macro
rust: str: add `CStr` unit tests
rust: str: implement several traits for `CStr`
rust: str: add `CStr` type
rust: str: add `b_str!` macro
rust: str: add `BStr` type
rust: alloc: add `Vec::try_with_capacity{,_in}()` constructors
rust: alloc: add `RawVec::try_with_capacity_in()` constructor
rust: prelude: add `error::code::*` constant items
rust: error: add `From` implementations for `Error`
rust: error: add codes from `errno-base.h`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Nothing too interesting:
- Add CONFIG_DEBUG_GROUP_REF which makes cgroup refcnt operations
kprobable
- A couple cpuset optimizations
- Other misc changes including doc and test updates"
* tag 'cgroup-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove rcu_read_lock()/rcu_read_unlock() in critical section of spin_lock_irq()
cgroup/cpuset: Improve cpuset_css_alloc() description
kselftest/cgroup: Add cleanup() to test_cpuset_prs.sh
cgroup/cpuset: Optimize cpuset_attach() on v2
cgroup/cpuset: Skip spread flags update on v2
kselftest/cgroup: Fix gathering number of CPUs
cgroup: cgroup refcnt functions should be exported when CONFIG_DEBUG_CGROUP_REF
cgroup: Implement DEBUG_CGROUP_REF
|
|
The `build_error` crate provides a function `build_error` which
will panic at compile-time if executed in const context and,
by default, will cause a build error if not executed at compile
time and the optimizer does not optimise away the call.
The `CONFIG_RUST_BUILD_ASSERT_ALLOW` kernel option allows to
relax the default build failure and convert it to a runtime
check. If the runtime check fails, `panic!` will be called.
Its functionality will be exposed to users as a couple macros in
the `kernel` crate in the following patch, thus some documentation
here refers to them for simplicity.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
[Reworded, adapted for upstream and applied latest changes]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes, 11 marked cc:stable.
Only three or four of the latter address post-6.0 issues, which is
hopefully a sign that things are converging"
* tag 'mm-hotfixes-stable-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
revert "kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible"
Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled
drm/amdgpu: temporarily disable broken Clang builds due to blown stack-frame
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: take the right locks for page table retraction
mm: migrate: fix THP's mapcount on isolation
mm: introduce arch_has_hw_nonleaf_pmd_young()
mm: add dummy pmd_young() for architectures not having it
mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes()
tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"
nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()
hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing
madvise: use zap_page_range_single for madvise dontneed
mm: replace VM_WARN_ON to pr_warn if the node is offline with __GFP_THISNODE
|
|
The config to be able to inject error codes into any function annotated
with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is
enabled. But unfortunately, this is always enabled on x86 when KPROBES
is enabled, and there's no way to turn it off.
As kprobes is useful for observability of the kernel, it is useful to
have it enabled in production environments. But error injection should
be avoided. Add a prompt to the config to allow it to be disabled even
when kprobes is enabled, and get rid of the "def_bool y".
This is a kernel debug feature (it's in Kconfig.debug), and should have
never been something enabled by default.
Cc: stable@vger.kernel.org
Fixes: 540adea3809f6 ("error-injection: Separate error-injection from kprobe")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prevent a kconfig warning that is caused by TEST_MAPLE_TREE by adding a
"depends on" clause for TEST_MAPLE_TREE since 'select' does not follow any
kconfig dependencies.
WARNING: unmet direct dependencies detected for DEBUG_MAPLE_TREE
Depends on [n]: DEBUG_KERNEL [=n]
Selected by [y]:
- TEST_MAPLE_TREE [=y] && RUNTIME_TESTING_MENU [=y]
Link: https://lkml.kernel.org/r/20221119055117.14094-1-rdunlap@infradead.org
Fixes: 120b116208a0 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When enabled, KASAN enlarges function's stack-frames. Pushing quite a few
over the current threshold. This can mainly be seen on 32-bit
architectures where the present limit (when !GCC) is a lowly 1024-Bytes.
Link: https://lkml.kernel.org/r/20221125120750.3537134-3-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If KPROBES_SANITY_TEST and ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled, but
STACKTRACE is not set. Build failed as below:
lib/test_kprobes.c: In function `stacktrace_return_handler':
lib/test_kprobes.c:228:8: error: implicit declaration of function `stack_trace_save'; did you mean `stacktrace_driver'? [-Werror=implicit-function-declaration]
ret = stack_trace_save(stack_buf, STACK_BUF_SIZE, 0);
^~~~~~~~~~~~~~~~
stacktrace_driver
cc1: all warnings being treated as errors
scripts/Makefile.build:250: recipe for target 'lib/test_kprobes.o' failed
make[2]: *** [lib/test_kprobes.o] Error 1
To fix this error, Select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled.
Link: https://lkml.kernel.org/r/20221121030620.63181-1-hucool.lihua@huawei.com
Fixes: 1f6d3a8f5e39 ("kprobes: Add a test case for stacktrace from kretprobe handler")
Signed-off-by: Li Hua <hucool.lihua@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:
# upstream:
debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.c file")
# retbleed work in x86/core:
5d8213864ade ("x86/retbleed: Add SKL return thunk")
... and these commits in include/linux/bpf.h:
# upstram:
18acb7fac22f ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")")
# x86/core commits:
931ab63664f0 ("x86/ibt: Implement FineIBT")
bea75b33895f ("x86/Kconfig: Introduce function padding")
The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream.
Conflicts:
arch/x86/kernel/asm-offsets.c
include/linux/bpf.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Make DEBUG_INFO_COMPRESSED a choice; DEBUG_INFO_COMPRESSED_NONE is the
default, DEBUG_INFO_COMPRESSED_ZLIB uses zlib,
DEBUG_INFO_COMPRESSED_ZSTD uses zstd.
This renames the existing KConfig option DEBUG_INFO_COMPRESSED to
DEBUG_INFO_COMPRESSED_ZLIB so users upgrading may need to reset the new
Kconfigs.
Some quick N=1 measurements with du, /usr/bin/time -v, and bloaty:
clang-16, x86_64 defconfig plus
CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_COMPRESSED_NONE=y:
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:55.43
488M vmlinux
27.6% 136Mi 0.0% 0 .debug_info
6.1% 30.2Mi 0.0% 0 .debug_str_offsets
3.5% 17.2Mi 0.0% 0 .debug_line
3.3% 16.3Mi 0.0% 0 .debug_loclists
0.9% 4.62Mi 0.0% 0 .debug_str
clang-16, x86_64 defconfig plus
CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_COMPRESSED_ZLIB=y:
Elapsed (wall clock) time (h:mm:ss or m:ss): 1:00.35
385M vmlinux
21.8% 85.4Mi 0.0% 0 .debug_info
2.1% 8.26Mi 0.0% 0 .debug_str_offsets
2.1% 8.24Mi 0.0% 0 .debug_loclists
1.9% 7.48Mi 0.0% 0 .debug_line
0.5% 1.94Mi 0.0% 0 .debug_str
clang-16, x86_64 defconfig plus
CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_COMPRESSED_ZSTD=y:
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:59.69
373M vmlinux
21.4% 81.4Mi 0.0% 0 .debug_info
2.3% 8.85Mi 0.0% 0 .debug_loclists
1.5% 5.71Mi 0.0% 0 .debug_line
0.5% 1.95Mi 0.0% 0 .debug_str_offsets
0.4% 1.62Mi 0.0% 0 .debug_str
That's only a 3.11% overall binary size savings over zlib, but at no
performance regression.
Link: https://maskray.me/blog/2022-09-09-zstd-compressed-debug-sections
Link: https://maskray.me/blog/2022-01-23-compressed-debug-sections
Suggested-by: Sedat Dilek (DHL Supply Chain) <sedat.dilek@dhl.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
As pointed out by Masahiro Yamada, Kconfig picks up the first default
entry which has true 'if' condition. Hence, the previously added check
for KMSAN was never used, because it followed the checks for 64BIT and
!64BIT.
Put KMSAN check before others to ensure it is always applied.
Link: https://lkml.kernel.org/r/20221102110611.1085175-3-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Link: https://lore.kernel.org/linux-mm/20221024212144.2852069-3-glider@google.com/
Fixes: 921757bc9b61 ("Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default")
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert the siphash self-test to KUnit so it will be included in "all
KUnit tests" coverage, and can be run individually still:
$ ./tools/testing/kunit/kunit.py run siphash
...
[02:58:45] Starting KUnit Kernel (1/1)...
[02:58:45] ============================================================
[02:58:45] =================== siphash (1 subtest) ====================
[02:58:45] [PASSED] siphash_test
[02:58:45] ===================== [PASSED] siphash =====================
[02:58:45] ============================================================
[02:58:45] Testing complete. Ran 1 tests: passed: 1
[02:58:45] Elapsed time: 21.421s total, 4.306s configuring, 16.947s building, 0.148s running
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Sander Vanheule <sander@svanheule.net>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/lkml/CAHmME9r+9MPH6zk3Vn=buEMSbQiWMFryqqzerKarmjYk+tHLJA@mail.gmail.com
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Convert the strscpy() self-test to a KUnit test.
Cc: David Gow <davidgow@google.com>
Cc: Tobin C. Harding <tobin@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/Y072ZMk/hNkfwqMv@dev-arch.thelio-3990X
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
It's really difficult to debug when cgroup or css refs leak. Let's add a
debug option to force the refcnt function to not be inlined so that they can
be kprobed for debugging.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
KMSAN adds a lot of instrumentation to the code, which results in
increased stack usage (up to 2048 bytes and more in some cases). It's
hard to predict how big the stack frames can be, so we disable the
warnings for KMSAN instead.
Link: https://lkml.kernel.org/r/20221024212144.2852069-3-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
