summaryrefslogtreecommitdiff
path: root/lib/Kconfig
AgeCommit message (Collapse)Author
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-15dma-direct: rename dma_noop to dma_directChristoph Hellwig
The trivial direct mapping implementation already does a virtual to physical translation which isn't strictly a noop, and will soon learn to do non-direct but linear physical to dma translations through the device offset and a few small tricks. Rename it to a better fitting name. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
2018-01-06lib/scatterlist: Introduce sgl_alloc() and sgl_free()Bart Van Assche
Many kernel drivers contain code that allocates and frees both a scatterlist and the pages that populate that scatterlist. Introduce functions in lib/scatterlist.c that perform these tasks instead of duplicating this functionality in multiple drivers. Only include these functions in the build if CONFIG_SGL_ALLOC=y to avoid that the kernel size increases if this functionality is not used. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-22Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Richard Weinberger: "General changes: - Unconfuse get_unmapped_area and point/unpoint driver methods - New partition parser: sharpslpart - Kill GENERIC_IO - Various fixes NAND changes: - Add a flag to mark NANDs that require 3 address cycles to encode a page address - Set a default ECC/free layout when NAND_ECC_NONE is requested - Fix a bug in panic_nand_write() - Another batch of cleanups for the denali driver - Fix PM support in the atmel driver - Remove support for platform data in the omap driver - Fix subpage write in the omap driver - Fix irq handling in the mtk driver - Change link order of mtk_ecc and mtk_nand drivers to speed up boot time - Change log level of ECC error messages in the mxc driver - Patch the pxa3xx driver to support Armada 8k platforms - Add BAM DMA support to the qcom driver - Convert gpio-nand to the GPIO desc API - Fix ECC handling in the mt29f driver SPI-NOR changes: - Introduce system power management support - New mechanism to select the proper .quad_enable() hook by JEDEC ID, when needed, instead of only by manufacturer ID - Add support to new memory parts from Gigadevice, Winbond, Macronix and Everspin - Maintainance for Cadence, Intel, Mediatek and STM32 drivers" * tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits) mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid mtd: sharpslpart: Add sharpslpart partition parser mtd: Add sanity checks in mtd_write/read_oob() mtd: remove the get_unmapped_area method mtd: implement mtd_get_unmapped_area() using the point method mtd: chips/map_rom.c: implement point and unpoint methods mtd: chips/map_ram.c: implement point and unpoint methods mtd: mtdram: properly handle the phys argument in the point method mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD' mtd: slram: use memremap() instead of ioremap() kconfig: kill off GENERIC_IO option mtd: Fix C++ comment in include/linux/mtd/mtd.h mtd: constify mtd_partition mtd: plat-ram: Replace manual resource management by devm mtd: nand: Fix writing mtdoops to nand flash. mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID mtd: nand: mtk: fix infinite ECC decode IRQ issue mtd: spi-nor: Add support for mr25h128 mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o mtd: spi-nor: enable 4B opcodes for mx66l51235l ...
2017-11-17lib: add module support to string testsGeert Uytterhoeven
Extract the string test code into its own source file, to allow compiling it either to a loadable module, or built into the kernel. Fixes: 03270c13c5ffaa6a ("lib/string.c: add testcases for memset16/32/64") Link: http://lkml.kernel.org/r/1505397744-3387-1-git-send-email-geert@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-13kconfig: kill off GENERIC_IO optionRob Herring
The GENERIC_IO option is set for every architecture except tile and score as those define NO_IOMEM. The option only controls visibility of CONFIG_MTD which doesn't appear to be necessary for any reason, so let's just remove GENERIC_IO. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: user-mode-linux-user@lists.sourceforge.net Cc: linux-mtd@lists.infradead.org Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-25lib: Add shared copies of some GCC library routinesPalmer Dabbelt
Many ports (m32r, microblaze, mips, parisc, score, and sparc) use functionally identical copies of various GCC library routine files, which came up as we were submitting the RISC-V port (which also uses some of these). This patch adds a new copy of these library routine files, which are functionally identical to the various other copies. These are availiable via Kconfig as CONFIG_GENERIC_$ROUTINE, which currently isn't used anywhere. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-14Merge branch 'zstd-minimal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull zstd support from Chris Mason: "Nick Terrell's patch series to add zstd support to the kernel has been floating around for a while. After talking with Dave Sterba, Herbert and Phillip, we decided to send the whole thing in as one pull request. zstd is a big win in speed over zlib and in compression ratio over lzo, and the compression team here at FB has gotten great results using it in production. Nick will continue to update the kernel side with new improvements from the open source zstd userland code. Nick has a number of benchmarks for the main zstd code in his lib/zstd commit: I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is 211,988,480 B large. Run the following commands for the benchmark: sudo modprobe zstd_compress_test sudo mknod zstd_compress_test c 245 0 sudo cp silesia.tar zstd_compress_test The time is reported by the time of the userland `cp`. The MB/s is computed with 1,536,217,008 B / time(buffer size, hash) which includes the time to copy from userland. The Adjusted MB/s is computed with 1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)). The memory reported is the amount of memory the compressor requests. | Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) | |----------|----------|----------|-------|---------|----------|----------| | none | 11988480 | 0.100 | 1 | 2119.88 | - | - | | zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 | | zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 | | zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 | | zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 | | zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 | | zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 | | zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 | | zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 | | zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 | | zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 | I benchmarked zstd decompression using the same method on the same machine. The benchmark file is located in the upstream zstd repo under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is the amount of memory required to decompress data compressed with the given compression level. If you know the maximum size of your input, you can reduce the memory usage of decompression irrespective of the compression level. | Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) | |----------|----------|---------|---------------|-------------| | none | 0.025 | 8479.54 | - | - | | zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 | | zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 | | zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 | | zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 | | zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 | | zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 | | zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 | | zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 | I ran a long series of tests and benchmarks on the btrfs side and the gains are very similar to the core benchmarks Nick ran" * 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: squashfs: Add zstd support btrfs: Add zstd support lib: Add zstd modules lib: Add xxhash module
2017-09-11Merge tag 'libnvdimm-for-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm from Dan Williams: "A rework of media error handling in the BTT driver and other updates. It has appeared in a few -next releases and collected some late- breaking build-error and warning fixups as a result. Summary: - Media error handling support in the Block Translation Table (BTT) driver is reworked to address sleeping-while-atomic locking and memory-allocation-context conflicts. - The dax_device lookup overhead for xfs and ext4 is moved out of the iomap hot-path to a mount-time lookup. - A new 'ecc_unit_size' sysfs attribute is added to advertise the read-modify-write boundary property of a persistent memory range. - Preparatory fix-ups for arm and powerpc pmem support are included along with other miscellaneous fixes" * tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits) libnvdimm, btt: fix format string warnings libnvdimm, btt: clean up warning and error messages ext4: fix null pointer dereference on sbi libnvdimm, nfit: move the check on nd_reserved2 to the endpoint dax: fix FS_DAX=n BLOCK=y compilation libnvdimm: fix integer overflow static analysis warning libnvdimm, nd_blk: remove mmio_flush_range() libnvdimm, btt: rework error clearing libnvdimm: fix potential deadlock while clearing errors libnvdimm, btt: cache sector_size in arena_info libnvdimm, btt: ensure that flags were also unchanged during a map_read libnvdimm, btt: refactor map entry operations with macros libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute ext4: perform dax_device lookup at mount ext2: perform dax_device lookup at mount xfs: perform dax_device lookup at mount dax: introduce a fs_dax_get_by_bdev() helper libnvdimm, btt: check memory allocation failure libnvdimm, label: fix index block size calculation ...
2017-09-08lib/string.c: add testcases for memset16/32/64Matthew Wilcox
[akpm@linux-foundation.org: minor tweaks] Link: http://lkml.kernel.org/r/20170720184539.31609-3-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Minchan Kim <minchan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-31libnvdimm, nd_blk: remove mmio_flush_range()Robin Murphy
mmio_flush_range() suffers from a lack of clearly-defined semantics, and is somewhat ambiguous to port to other architectures where the scope of the writeback implied by "flush" and ordering might matter, but MMIO would tend to imply non-cacheable anyway. Per the rationale in 67a3e8fe9015 ("nd_blk: change aperture mapping from WC to WB"), the only existing use is actually to invalidate clean cache lines for ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent cleanup of the pmem API, that also now happens to be the exact purpose of arch_invalidate_pmem(), which would be a far more well-defined tool for the job. Rather than risk potentially inconsistent implementations of mmio_flush_range() for the sake of one callsite, streamline things by removing it entirely and instead move the ARCH_MEMREMAP_PMEM related definitions up to the libnvdimm level, so they can be shared by NFIT as well. This allows NFIT to be enabled for arm64. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-15lib: Add zstd modulesNick Terrell
Add zstd compression and decompression kernel modules. zstd offers a wide varity of compression speed and quality trade-offs. It can compress at speeds approaching lz4, and quality approaching lzma. zstd decompressions at speeds more than twice as fast as zlib, and decompression speed remains roughly the same across all compression levels. The code was ported from the upstream zstd source repository. The `linux/zstd.h` header was modified to match linux kernel style. The cross-platform and allocation code was stripped out. Instead zstd requires the caller to pass a preallocated workspace. The source files were clang-formatted [1] to match the Linux Kernel style as much as possible. Otherwise, the code was unmodified. We would like to avoid as much further manual modification to the source code as possible, so it will be easier to keep the kernel zstd up to date. I benchmarked zstd compression as a special character device. I ran zstd and zlib compression at several levels, as well as performing no compression, which measure the time spent copying the data to kernel space. Data is passed to the compresser 4096 B at a time. The benchmark file is located in the upstream zstd source repository under `contrib/linux-kernel/zstd_compress_test.c` [2]. I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is 211,988,480 B large. Run the following commands for the benchmark: sudo modprobe zstd_compress_test sudo mknod zstd_compress_test c 245 0 sudo cp silesia.tar zstd_compress_test The time is reported by the time of the userland `cp`. The MB/s is computed with 1,536,217,008 B / time(buffer size, hash) which includes the time to copy from userland. The Adjusted MB/s is computed with 1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)). The memory reported is the amount of memory the compressor requests. | Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) | |----------|----------|----------|-------|---------|----------|----------| | none | 11988480 | 0.100 | 1 | 2119.88 | - | - | | zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 | | zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 | | zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 | | zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 | | zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 | | zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 | | zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 | | zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 | | zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 | | zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 | I benchmarked zstd decompression using the same method on the same machine. The benchmark file is located in the upstream zstd repo under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is the amount of memory required to decompress data compressed with the given compression level. If you know the maximum size of your input, you can reduce the memory usage of decompression irrespective of the compression level. | Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) | |----------|----------|---------|---------------|-------------| | none | 0.025 | 8479.54 | - | - | | zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 | | zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 | | zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 | | zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 | | zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 | | zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 | | zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 | | zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 | Tested in userland using the test-suite in the zstd repo under `contrib/linux-kernel/test/UserlandTest.cpp` [5] by mocking the kernel functions. Fuzz tested using libfuzzer [6] with the fuzz harnesses under `contrib/linux-kernel/test/{RoundTripCrash.c,DecompressCrash.c}` [7] [8] with ASAN, UBSAN, and MSAN. Additionaly, it was tested while testing the BtrFS and SquashFS patches coming next. [1] https://clang.llvm.org/docs/ClangFormat.html [2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_compress_test.c [3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia [4] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_decompress_test.c [5] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/UserlandTest.cpp [6] http://llvm.org/docs/LibFuzzer.html [7] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/RoundTripCrash.c [8] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/DecompressCrash.c zstd source repository: https://github.com/facebook/zstd Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-08-15lib: Add xxhash moduleNick Terrell
Adds xxhash kernel module with xxh32 and xxh64 hashes. xxhash is an extremely fast non-cryptographic hash algorithm for checksumming. The zstd compression and decompression modules added in the next patch require xxhash. I extracted it out from zstd since it is useful on its own. I copied the code from the upstream XXHash source repository and translated it into kernel style. I ran benchmarks and tests in the kernel and tests in userland. I benchmarked xxhash as a special character device. I ran in four modes, no-op, xxh32, xxh64, and crc32. The no-op mode simply copies the data to kernel space and ignores it. The xxh32, xxh64, and crc32 modes compute hashes on the copied data. I also ran it with four different buffer sizes. The benchmark file is located in the upstream zstd source repository under `contrib/linux-kernel/xxhash_test.c` [1]. I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using the file `filesystem.squashfs` from `ubuntu-16.10-desktop-amd64.iso`, which is 1,536,217,088 B large. Run the following commands for the benchmark: modprobe xxhash_test mknod xxhash_test c 245 0 time cp filesystem.squashfs xxhash_test The time is reported by the time of the userland `cp`. The GB/s is computed with 1,536,217,008 B / time(buffer size, hash) which includes the time to copy from userland. The Normalized GB/s is computed with 1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)). | Buffer Size (B) | Hash | Time (s) | GB/s | Adjusted GB/s | |-----------------|-------|----------|------|---------------| | 1024 | none | 0.408 | 3.77 | - | | 1024 | xxh32 | 0.649 | 2.37 | 6.37 | | 1024 | xxh64 | 0.542 | 2.83 | 11.46 | | 1024 | crc32 | 1.290 | 1.19 | 1.74 | | 4096 | none | 0.380 | 4.04 | - | | 4096 | xxh32 | 0.645 | 2.38 | 5.79 | | 4096 | xxh64 | 0.500 | 3.07 | 12.80 | | 4096 | crc32 | 1.168 | 1.32 | 1.95 | | 8192 | none | 0.351 | 4.38 | - | | 8192 | xxh32 | 0.614 | 2.50 | 5.84 | | 8192 | xxh64 | 0.464 | 3.31 | 13.60 | | 8192 | crc32 | 1.163 | 1.32 | 1.89 | | 16384 | none | 0.346 | 4.43 | - | | 16384 | xxh32 | 0.590 | 2.60 | 6.30 | | 16384 | xxh64 | 0.466 | 3.30 | 12.80 | | 16384 | crc32 | 1.183 | 1.30 | 1.84 | Tested in userland using the test-suite in the zstd repo under `contrib/linux-kernel/test/XXHashUserlandTest.cpp` [2] by mocking the kernel functions. A line in each branch of every function in `xxhash.c` was commented out to ensure that the test-suite fails. Additionally tested while testing zstd and with SMHasher [3]. [1] https://phabricator.intern.facebook.com/P57526246 [2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/XXHashUserlandTest.cpp [3] https://github.com/aappleby/smhasher zstd source repository: https://github.com/facebook/zstd XXHash source repository: https://github.com/cyan4973/xxhash Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-07-07Merge tag 'libnvdimm-for-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "libnvdimm updates for the latest ACPI and UEFI specifications. This pull request also includes new 'struct dax_operations' enabling to undo the abuse of copy_user_nocache() for copy operations to pmem. The dax work originally missed 4.12 to address concerns raised by Al. Summary: - Introduce the _flushcache() family of memory copy helpers and use them for persistent memory write operations on x86. The _flushcache() semantic indicates that the cache is either bypassed for the copy operation (movnt) or any lines dirtied by the copy operation are written back (clwb, clflushopt, or clflush). - Extend dax_operations with ->copy_from_iter() and ->flush() operations. These operations and other infrastructure updates allow all persistent memory specific dax functionality to be pushed into libnvdimm and the pmem driver directly. It also allows dax-specific sysfs attributes to be linked to a host device, for example: /sys/block/pmem0/dax/write_cache - Add support for the new NVDIMM platform/firmware mechanisms introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace label format, extensions to the address-range-scrub command set, new error injection commands, and a new BTT (block-translation-table) layout. These updates support inter-OS and pre-OS compatibility. - Fix a longstanding memory corruption bug in nfit_test. - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2) capable. - Miscellaneous fixes and small updates across libnvdimm and the nfit driver. Acknowledgements that came after the branch was pushed: commit 6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits) libnvdimm, namespace: record 'lbasize' for pmem namespaces acpi/nfit: Issue Start ARS to retrieve existing records libnvdimm: New ACPI 6.2 DSM functions acpi, nfit: Show bus_dsm_mask in sysfs libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru. acpi, nfit: Enable DSM pass thru for root functions. libnvdimm: passthru functions clear to send libnvdimm, btt: convert some info messages to warn/err libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime libnvdimm: fix the clear-error check in nsio_rw_bytes libnvdimm, btt: fix btt_rw_page not returning errors acpi, nfit: quiet invalid block-aperture-region warnings libnvdimm, btt: BTT updates for UEFI 2.7 format acpi, nfit: constify *_attribute_group libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region libnvdimm, pmem, dax: export a cache control attribute dax: convert to bitmask for flags dax: remove default copy_from_iter fallback libnvdimm, nfit: enable support for volatile ranges libnvdimm, pmem: fix persistence warning ...
2017-06-09x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass ↵Dan Williams
operations The pmem driver has a need to transfer data with a persistent memory destination and be able to rely on the fact that the destination writes are not cached. It is sufficient for the writes to be flushed to a cpu-store-buffer (non-temporal / "movnt" in x86 terms), as we expect userspace to call fsync() to ensure data-writes have reached a power-fail-safe zone in the platform. The fsync() triggers a REQ_FUA or REQ_FLUSH to the pmem driver which will turn around and fence previous writes with an "sfence". Implement a __copy_from_user_inatomic_flushcache, memcpy_page_flushcache, and memcpy_flushcache, that guarantee that the destination buffer is not dirty in the cpu cache on completion. The new copy_from_iter_flushcache and sub-routines will be used to replace the "pmem api" (include/linux/pmem.h + arch/x86/include/asm/pmem.h). The availability of copy_from_iter_flushcache() and memcpy_flushcache() are gated by the CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE config symbol, and fallback to copy_from_iter_nocache() and plain memcpy() otherwise. This is meant to satisfy the concern from Linus that if a driver wants to do something beyond the normal nocache semantics it should be something private to that driver [1], and Al's concern that anything uaccess related belongs with the rest of the uaccess code [2]. The first consumer of this interface is a new 'copy_from_iter' dax operation so that pmem can inject cache maintenance operations without imposing this overhead on other dax-capable drivers. [1]: https://lists.01.org/pipermail/linux-nvdimm/2017-January/008364.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2017-April/009942.html Cc: <x86@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09lib: Add crc4 moduleJeremy Kerr
Add a little helper for crc4 calculations. This works 4-bits-at-a-time, using a simple table approach. We will need this in the FSI core code, as well as any master implementations that need to calculate CRCs in software. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't save TIPC header values before the header has been validated, from Jon Paul Maloy. 2) Fix memory leak in RDS, from Zhu Yanjun. 3) We miss to initialize the UID in the flow key in some paths, from Julian Anastasov. 4) Fix latent TOS masking bug in the routing cache removal from years ago, also from Julian. 5) We forget to set the sockaddr port in sctp_copy_local_addr_list(), fix from Xin Long. 6) Missing module ref count drop in packet scheduler actions, from Roman Mashak. 7) Fix RCU annotations in rht_bucket_nested, from Herbert Xu. 8) Fix use after free which happens because L2TP's ipv4 support returns non-zero values from it's backlog_rcv function which ipv4 interprets as protocol values. Fix from Paul Hüber. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) qed: Don't use attention PTT for configuring BW qed: Fix race with multiple VFs l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv xfrm: provide correct dst in xfrm_neigh_lookup rhashtable: Fix RCU dereference annotation in rht_bucket_nested rhashtable: Fix use before NULL check in bucket_table_free net sched actions: do not overwrite status of action creation. rxrpc: Kernel calls get stuck in recvmsg net sched actions: decrement module reference count after table flush. lib: Allow compile-testing of parman ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt sctp: set sin_port for addr param when checking duplicate address net/mlx4_en: fix overflow in mlx4_en_init_timestamp() netfilter: nft_set_bitmap: incorrect bitmap size net: s2io: fix typo argumnet argument net: vxge: fix typo argumnet argument netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value. ipv4: mask tos for input route ipv4: add missing initialization for flowi4_uid lib: fix spelling mistake: "actualy" -> "actually" ...
2017-02-26lib: Allow compile-testing of parmanGeert Uytterhoeven
This allows to enable and run the accompanying test (test_parman) without dependencies on other users of parman. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-25Merge tag 'for-next-dma_ops' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-24lib: add module support to glob testsGeert Uytterhoeven
Extract the glob test code into its own source file, to allow to compile it either to a loadable module, or builtin into the kernel. Link: http://lkml.kernel.org/r/1483470276-10517-2-git-send-email-geert@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24lib: add module support to crc32 testsGeert Uytterhoeven
Extract the crc32 test code into its own source file, to allow to compile it either to a loadable module, or builtin into the kernel. Link: http://lkml.kernel.org/r/1483470276-10517-1-git-send-email-geert@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23Merge tag 'drm-for-v4.11-less-shouty' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling rework - MMU-less support for fbdev helpers - drm_crtc_from_index helper - Core CRC API - Remove drm_framebuffer_unregister_private - Debugfs cleanup - EDID/Infoframe fixes - Release callback - Tinydrm support (smaller drivers for simple hw) panel: - Add support for some new simple panels i915: - FBC by default for gen9+ - Shared dpll cleanups and docs - GEN8 powerdomain cleanup - DMC support on GLK - DP MST audio support - HuC loading support - GVT init ordering fixes - GVT IOMMU workaround fix amdgpu/radeon: - Power/clockgating improvements - Preliminary SR-IOV support - TTM buffer priority and eviction fixes - SI DPM quirks removed due to firmware fixes - Powerplay improvements - VCE/UVD powergating fixes - Cleanup SI GFX code to match CI/VI - Support for > 2 displays on 3/5 crtc asics - SI headless fixes nouveau: - Rework securre boot code in prep for GP10x secure boot - Channel recovery improvements - Initial power budget code - MMU rework preperation vmwgfx: - Bunch of fixes and cleanups exynos: - Runtime PM support for MIC driver - Cleanups to use atomic helpers - UHD Support for TM2/TM2E boards - Trigger mode fix for Rinato board etnaviv: - Shader performance fix - Command stream validator fixes - Command buffer suballocator rockchip: - CDN DisplayPort support - IOMMU support for arm64 platform imx-drm: - Fix i.MX5 TV encoder probing - Remove lower fb size limits msm: - Support for HW cursor on MDP5 devices - DSI encoder cleanup - GPU DT bindings cleanup sti: - stih410 cleanups - Create fbdev at binding - HQVDP fixes - Remove stih416 chip functionality - DVI/HDMI mode selection fixes - FPS statistic reporting omapdrm: - IRQ code cleanup dwi-hdmi bridge: - Cleanups and fixes adv-bridge: - Updates for nexus sii8520 bridge: - Add interlace mode support - Rework HDMI and lots of fixes qxl: - probing/teardown cleanups ZTE drm: - HDMI audio via SPDIF interface - Video Layer overlay plane support - Add TV encoder output device atmel-hlcdc: - Rework fbdev creation logic tegra: - OF node fix fsl-dcu: - Minor fixes mali-dp: - Assorted fixes sunxi: - Minor fix" [ This was the "fixed" pull, that still had build warnings due to people not even having build tested the result. I'm not a happy camper I've fixed the things I noticed up in this merge. - Linus ] * tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits) lib/Kconfig: make PRIME_NUMBERS not user selectable drm/tinydrm: helpers: Properly fix backlight dependency drm/tinydrm: mipi-dbi: Fix field width specifier warning drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files drm/amd/powerplay: fix PSI feature on Polars12 drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/tinydrm: Add support for Multi-Inno MI0283QT display dt-bindings: Add Multi-Inno MI0283QT binding dt-bindings: display/panel: Add common rotation property of: Add vendor prefix for Multi-Inno drm/tinydrm: Add MIPI DBI support drm/tinydrm: Add helper functions drm: Add DRM support for tiny LCD displays drm/amd/amdgpu: post card if there is real hw resetting performed drm/nouveau/tmr: provide backtrace when a timeout is hit drm/nouveau/pci/g92: Fix rearm drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios drm/nouveau/hwmon: expose power_max and power_crit ..
2017-02-24lib/Kconfig: make PRIME_NUMBERS not user selectable.Dave Airlie
Linus doesn't like it user selectable, so kill it until someone needs it for something else. Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-02-23lib: Remove string from parman config selectionJiri Pirko
As reported by Geert, remove the string so the user does not see this config option. The option is explicitly selected only as a dependency of in-kernel users. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 44091d29f207 ("lib: Introduce priority array area manager") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03lib: Introduce priority array area managerJiri Pirko
This introduces a infrastructure for management of linear priority areas. Priority order in an array matters, however order of items inside a priority group does not matter. As an initial implementation, L-sort algorithm is used. It is quite trivial. More advanced algorithm called P-sort will be introduced as a follow-up. The infrastructure is prepared for other algos. Alongside this, a testing module is introduced as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24lib/dma-virt: Add dma_virt_opsBart Van Assche
Several RDMA drivers (hfi1, qib and rxe) expect that ib_sge.addr is a virtual address. Provide DMA mapping operations that are suitable for these drivers. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24lib/dma-noop: Only build dma_noop_ops for s390 and m32rBart Van Assche
Reduce the kernel size by only building dma_noop_ops for those architectures that actually use it. This was suggested by Christoph Hellwig. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-27lib: Add a simple prime number generatorChris Wilson
Prime numbers are interesting for testing components that use multiplies and divides, such as testing DRM's struct drm_mm alignment computations. v2: Move to lib/, add selftest v3: Fix initial constants (exclude 0/1 from being primes) v4: More RCU markup to keep 0day/sparse happy v5: Fix RCU unwind on module exit, add to kselftests v6: Tidy computation of bitmap size v7: for_each_prime_number_from() v8: Compose small-primes using BIT() for easier verification v9: Move rcu dance entirely into callers. v10: Improve quote for Betrand's Postulate (aka Chebyshev's theorem) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lukas Wunner <lukas@wunner.de> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222144514.3911-1-chris@chris-wilson.co.uk
2016-10-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - fsnotify updates - ocfs2 updates - all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits) console: don't prefer first registered if DT specifies stdout-path cred: simpler, 1D supplementary groups CREDITS: update Pavel's information, add GPG key, remove snail mail address mailmap: add Johan Hovold .gitattributes: set git diff driver for C source code files uprobes: remove function declarations from arch/{mips,s390} spelling.txt: "modeled" is spelt correctly nmi_backtrace: generate one-line reports for idle cpus arch/tile: adopt the new nmi_backtrace framework nmi_backtrace: do a local dump_stack() instead of a self-NMI nmi_backtrace: add more trigger_*_cpu_backtrace() methods min/max: remove sparse warnings when they're nested Documentation/filesystems/proc.txt: add more description for maps/smaps mm, proc: fix region lost in /proc/self/smaps proc: fix timerslack_ns CAP_SYS_NICE check when adjusting self proc: add LSM hook checks to /proc/<tid>/timerslack_ns proc: relax /proc/<tid>/timerslack_ns capability requirements meminfo: break apart a very long seq_printf with #ifdefs seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char proc: faster /proc/*/status ...
2016-10-07atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVEVineet Gupta
This came to light when implementing native 64-bit atomics for ARCv2. The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE to check whether atomic64_dec_if_positive() is available. It seems it was needed when not every arch defined it. However as of current code the Kconfig option seems needless - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a generic definition of API is present lib/atomic64.c - arches with native 64-bit atomics select it in arch/*/Kconfig and define the API in their headers So I see no point in keeping the Kconfig option Compile tested for: - blackfin (CONFIG_GENERIC_ATOMIC64) - x86 (!CONFIG_GENERIC_ATOMIC64) - ia64 Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-17blk-mq: abstract tag allocation out into sbitmap libraryOmar Sandoval
This is a generally useful data structure, so make it available to anyone else who might want to use it. It's also a nice cleanup separating the allocation logic from the rest of the tag handling logic. The code is behind a new Kconfig option, CONFIG_SBITMAP, which is only selected by CONFIG_BLOCK for now. This should be a complete noop functionality-wise. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-20raxix-tree: introduce CONFIG_RADIX_TREE_MULTIORDERMatthew Wilcox
I've been receiving increasingly concerned notes from 0day about how much my recent changes have been bloating the radix tree. Make it happier by only including multiorder support if CONFIG_TRANSPARENT_HUGEPAGES is set. This is an independent Kconfig option, so other radix tree users can also set it if they have a need. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-15lib: scatterlist: move SG pool code from SCSI driver to lib/sg_pool.cMing Lin
Now it's ready to move the mempool based SG chained allocator code from SCSI driver to lib/sg_pool.c, which will be compiled only based on a Kconfig symbol CONFIG_SG_POOL. SCSI selects CONFIG_SG_POOL. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-25mm, kasan: stackdepot implementation. Enable stackdepot for SLABAlexander Potapenko
Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-23Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...
2016-01-22Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: API: - A large number of bug fixes for the af_alg interface, credit goes to Dmitry Vyukov for discovering and reporting these issues. Algorithms: - sw842 needs to select crc32. - The soft dependency on crc32c is now in the correct spot. Drivers: - The atmel AES driver needs HAS_DMA. - The atmel AES driver was a missing break statement, fortunately it's only a debug function. - A number of bug fixes for the Intel qat driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (24 commits) crypto: algif_skcipher - sendmsg SG marking is off by one crypto: crc32c - Fix crc32c soft dependency crypto: algif_skcipher - Load TX SG list after waiting crypto: atmel-aes - Add missing break to atmel_aes_reg_name crypto: algif_skcipher - Fix race condition in skcipher_check_key crypto: algif_hash - Fix race condition in hash_check_key crypto: CRYPTO_DEV_ATMEL_AES should depend on HAS_DMA lib: sw842: select crc32 crypto: af_alg - Forbid bind(2) when nokey child sockets are present crypto: algif_skcipher - Remove custom release parent function crypto: algif_hash - Remove custom release parent function crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path crypto: qat - update init_esram for C3xxx dev type crypto: qat - fix timeout issues crypto: qat - remove to call get_sram_bar_id for qat_c3xxx crypto: algif_skcipher - Add key check exception for cipher_null crypto: skcipher - Add crypto_skcipher_has_setkey crypto: algif_hash - Require setkey before accept(2) crypto: hash - Add crypto_ahash_has_setkey crypto: algif_skcipher - Add nokey compatibility path ...
2016-01-18lib: sw842: select crc32Arnd Bergmann
The sw842 library code was merged in linux-4.1 and causes a very rare randconfig failure when CONFIG_CRC32 is not set: lib/built-in.o: In function `sw842_compress': oid_registry.c:(.text+0x12ddc): undefined reference to `crc32_be' lib/built-in.o: In function `sw842_decompress': oid_registry.c:(.text+0x137e4): undefined reference to `crc32_be' This adds an explict 'select CRC32' statement, similar to what the other users of the crc32 code have. In practice, CRC32 is always enabled anyway because over 100 other symbols select it. Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2da572c959dd ("lib: add software 842 compression/decompression") Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-12-11irq_poll: make blk-iopoll available outside the block layerChristoph Hellwig
The new name is irq_poll as iopoll is already taken. Better suggestions welcome. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2015-12-08lib: scatterlist: fix Kconfig descriptionGeert Uytterhoeven
Spelling s/heler/helper/, grammar s/channel/channels/ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-16lib/Kconfig: ZLIB_DEFLATE must select BITREVERSEAndrew Morton
lib/built-in.o: In function `__bitrev32': deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table' deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table' Anything which uses bitrevX() has to select BITREVERSE, to grab lib/bitrev.o. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "In this one: - d_move fixes (Eric Biederman) - UFS fixes (me; locking is mostly sane now, a bunch of bugs in error handling ought to be fixed) - switch of sb_writers to percpu rwsem (Oleg Nesterov) - superblock scalability (Josef Bacik and Dave Chinner) - swapon(2) race fix (Hugh Dickins)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits) vfs: Test for and handle paths that are unreachable from their mnt_root dcache: Reduce the scope of i_lock in d_splice_alias dcache: Handle escaped paths in prepend_path mm: fix potential data race in SyS_swapon inode: don't softlockup when evicting inodes inode: rename i_wb_list to i_io_list sync: serialise per-superblock sync operations inode: convert inode_sb_list_lock to per-sb inode: add hlist_fake to avoid the inode hash lock in evict writeback: plug writeback at a high level change sb_writers to use percpu_rw_semaphore shift percpu_counter_destroy() into destroy_super_work() percpu-rwsem: kill CONFIG_PERCPU_RWSEM percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire() percpu-rwsem: introduce percpu_down_read_trylock() document rwsem_release() in sb_wait_write() fix the broken lockdep logic in __sb_start_write() introduce __sb_writers_{acquired,release}() helpers ufs_inode_get{frag,block}(): get rid of 'phys' argument ufs_getfrag_block(): tidy up a bit ...
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-08-27nd_blk: change aperture mapping from WC to WBRoss Zwisler
This should result in a pretty sizeable performance gain for reads. For rough comparison I did some simple read testing using PMEM to compare reads of write combining (WC) mappings vs write-back (WB). This was done on a random lab machine. PMEM reads from a write combining mapping: # dd of=/dev/null if=/dev/pmem0 bs=4096 count=100000 100000+0 records in 100000+0 records out 409600000 bytes (410 MB) copied, 9.2855 s, 44.1 MB/s PMEM reads from a write-back mapping: # dd of=/dev/null if=/dev/pmem0 bs=4096 count=1000000 1000000+0 records in 1000000+0 records out 4096000000 bytes (4.1 GB) copied, 3.44034 s, 1.2 GB/s To be able to safely support a write-back aperture I needed to add support for the "read flush" _DSM flag, as outlined in the DSM spec: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf This flag tells the ND BLK driver that it needs to flush the cache lines associated with the aperture after the aperture is moved but before any new data is read. This ensures that any stale cache lines from the previous contents of the aperture will be discarded from the processor cache, and the new data will be read properly from the DIMM. We know that the cache lines are clean and will be discarded without any writeback because either a) the previous aperture operation was a read, and we never modified the contents of the aperture, or b) the previous aperture operation was a write and we must have written back the dirtied contents of the aperture to the DIMM before the I/O was completed. In order to add support for the "read flush" flag I needed to add a generic routine to invalidate cache lines, mmio_flush_range(). This is protected by the ARCH_HAS_MMIO_FLUSH Kconfig variable, and is currently only supported on x86. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-24lib: scatterlist: add sg splitting functionRobert Jarzmik
Sometimes a scatter-gather has to be split into several chunks, or sub scatter lists. This happens for example if a scatter list will be handled by multiple DMA channels, each one filling a part of it. A concrete example comes with the media V4L2 API, where the scatter list is allocated from userspace to hold an image, regardless of the knowledge of how many DMAs will fill it : - in a simple RGB565 case, one DMA will pump data from the camera ISP to memory - in the trickier YUV422 case, 3 DMAs will pump data from the camera ISP pipes, one for pipe Y, one for pipe U and one for pipe V For these cases, it is necessary to split the original scatter list into multiple scatter lists, which is the purpose of this patch. The guarantees that are required for this patch are : - the intersection of spans of any couple of resulting scatter lists is empty. - the union of spans of all resulting scatter lists is a subrange of the span of the original scatter list. - streaming DMA API operations (mapping, unmapping) should not happen both on both the resulting and the original scatter list. It's either the first or the later ones. - the caller is reponsible to call kfree() on the resulting scatterlists. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-20average: remove out-of-line implementationJohannes Berg
Since all users are now converted to the inline implementation, remove the out-of-line implementation entirely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-15percpu-rwsem: kill CONFIG_PERCPU_RWSEMOleg Nesterov
Remove CONFIG_PERCPU_RWSEM, the next patch adds the unconditional user of percpu_rw_semaphore. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2015-06-29Merge tag 'libnvdimm-for-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm Pull libnvdimm subsystem from Dan Williams: "The libnvdimm sub-system introduces, in addition to the libnvdimm-core, 4 drivers / enabling modules: NFIT: Instantiates an "nvdimm bus" with the core and registers memory devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface table). After registering NVDIMMs the NFIT driver then registers "region" devices. A libnvdimm-region defines an access mode and the boundaries of persistent memory media. A region may span multiple NVDIMMs that are interleaved by the hardware memory controller. In turn, a libnvdimm-region can be carved into a "namespace" device and bound to the PMEM or BLK driver which will attach a Linux block device (disk) interface to the memory. PMEM: Initially merged in v4.1 this driver for contiguous spans of persistent memory address ranges is re-worked to drive PMEM-namespaces emitted by the libnvdimm-core. In this update the PMEM driver, on x86, gains the ability to assert that writes to persistent memory have been flushed all the way through the caches and buffers in the platform to persistent media. See memcpy_to_pmem() and wmb_pmem(). BLK: This new driver enables access to persistent memory media through "Block Data Windows" as defined by the NFIT. The primary difference of this driver to PMEM is that only a small window of persistent memory is mapped into system address space at any given point in time. Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access different portions of the media. BLK-mode, by definition, does not support DAX. BTT: This is a library, optionally consumed by either PMEM or BLK, that converts a byte-accessible namespace into a disk with atomic sector update semantics (prevents sector tearing on crash or power loss). The sinister aspect of sector tearing is that most applications do not know they have a atomic sector dependency. At least today's disk's rarely ever tear sectors and if they do one almost certainly gets a CRC error on access. NVDIMMs will always tear and always silently. Until an application is audited to be robust in the presence of sector-tearing the usage of BTT is recommended. Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig, Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox, Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael Wysocki, and Bob Moore" * tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits) arch, x86: pmem api for ensuring durability of persistent memory updates libnvdimm: Add sysfs numa_node to NVDIMM devices libnvdimm: Set numa_node to NVDIMM devices acpi: Add acpi_map_pxm_to_online_node() libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only pmem: flag pmem block devices as non-rotational libnvdimm: enable iostat pmem: make_request cleanups libnvdimm, pmem: fix up max_hw_sectors libnvdimm, blk: add support for blk integrity libnvdimm, btt: add support for blk integrity fs/block_dev.c: skip rw_page if bdev has integrity libnvdimm: Non-Volatile Devices tools/testing/nvdimm: libnvdimm unit test infrastructure libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory nd_btt: atomic sector updates libnvdimm: infrastructure for btt devices libnvdimm: write blk label set libnvdimm: write pmem label set libnvdimm: blk labels and namespace instantiation ...
2015-06-26arch, x86: pmem api for ensuring durability of persistent memory updatesRoss Zwisler
Based on an original patch by Ross Zwisler [1]. Writes to persistent memory have the potential to be posted to cpu cache, cpu write buffers, and platform write buffers (memory controller) before being committed to persistent media. Provide apis, memcpy_to_pmem(), wmb_pmem(), and memremap_pmem(), to write data to pmem and assert that it is durable in PMEM (a persistent linear address range). A '__pmem' attribute is added so sparse can track proper usage of pointers to pmem. This continues the status quo of pmem being x86 only for 4.2, but reworks to ioremap, and wider implementation of memremap() will enable other archs in 4.3. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-May/000932.html Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> [djbw: various reworks] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-19Merge branch 'mvebu/drivers' of ↵Herbert Xu
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Merge the mvebu/drivers branch of the arm-soc tree which contains just a single patch bfa1ce5f38938cc9e6c7f2d1011f88eba2b9e2b2 ("bus: mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be a prerequisite of the new marvell/cesa crypto driver.