summaryrefslogtreecommitdiff
path: root/lib/lzo
AgeCommit message (Collapse)Author
2020-06-19docs: move remaining stuff under Documentation/*.txt to Documentation/stagingMauro Carvalho Chehab
There are several files that I was unable to find a proper place for them, and 3 ones that are still in plain old text format. Let's place those stuff behind the carpet, as we'd like to keep the root directory clean. We can later discuss and move those into better places. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/11bd0d75e65a874f7c276a0aeab0fe13f3376f5f.1592203650.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-06-11lib/lzo: fix ambiguous encoding bug in lzo-rleDave Rodgman
In some rare cases, for input data over 32 KB, lzo-rle could encode two different inputs to the same compressed representation, so that decompression is then ambiguous (i.e. data may be corrupted - although zram is not affected because it operates over 4 KB pages). This modifies the compressor without changing the decompressor or the bitstream format, such that: - there is no change to how data produced by the old compressor is decompressed - an old decompressor will correctly decode data from the updated compressor - performance and compression ratio are not affected - we avoid introducing a new bitstream format In testing over 12.8M real-world files totalling 903 GB, three files were affected by this bug. I also constructed 37M semi-random 64 KB files totalling 2.27 TB, and saw no affected files. Finally I tested over files constructed to contain each of the ~1024 possible bad input sequences; for all of these cases, updated lzo-rle worked correctly. There is no significant impact to performance or compression ratio. Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Dave Rodgman <dave.rodgman@arm.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Chao Yu <yuchao0@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200507100203.29785-1-dave.rodgman@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25lib/lzo/lzo1x_compress.c: fix alignment bug in lzo-rleDave Rodgman
Fix an unaligned access which breaks on platforms where this is not permitted (e.g., Sparc). Link: http://lkml.kernel.org/r/20190912145502.35229-1-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: Dave Rodgman <dave.rodgman@arm.com> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-05lib/lzo: fix bugs for very short or empty inputDave Rodgman
For very short input data (0 - 1 bytes), lzo-rle was not behaving correctly. Fix this behaviour and update documentation accordingly. For zero-length input, lzo v0 outputs an end-of-stream marker only, which was misinterpreted by lzo-rle as a bitstream version number. Ensure bitstream versions > 0 require a minimum stream length of 5. Also fixes a bug in handling the tail for very short inputs when a bitstream version is present. Link: http://lkml.kernel.org/r/20190326165857.34613-1-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: separate lzo-rle from lzoDave Rodgman
To prevent any issues with persistent data, separate lzo-rle from lzo so that it is treated as a separate algorithm, and lzo is still available. Link: http://lkml.kernel.org/r/20190205155944.16007-3-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: implement run-length encodingDave Rodgman
Patch series "lib/lzo: run-length encoding support", v5. Following on from the previous lzo-rle patchset: https://lkml.org/lkml/2018/11/30/972 This patchset contains only the RLE patches, and should be applied on top of the non-RLE patches ( https://lkml.org/lkml/2019/2/5/366 ). Previously, some questions were raised around the RLE patches. I've done some additional benchmarking to answer these questions. In short: - RLE offers significant additional performance (data-dependent) - I didn't measure any regressions that were clearly outside the noise One concern with this patchset was around performance - specifically, measuring RLE impact separately from Matt Sealey's patches (CTZ & fast copy). I have done some additional benchmarking which I hope clarifies the benefits of each part of the patchset. Firstly, I've captured some memory via /dev/fmem from a Chromebook with many tabs open which is starting to swap, and then split this into 4178 4k pages. I've excluded the all-zero pages (as zram does), and also the no-zero pages (which won't tell us anything about RLE performance). This should give a realistic test dataset for zram. What I found was that the data is VERY bimodal: 44% of pages in this dataset contain 5% or fewer zeros, and 44% contain over 90% zeros (30% if you include the no-zero pages). This supports the idea of special-casing zeros in zram. Next, I've benchmarked four variants of lzo on these pages (on 64-bit Arm at max frequency): baseline LZO; baseline + Matt Sealey's patches (aka MS); baseline + RLE only; baseline + MS + RLE. Numbers are for weighted roundtrip throughput (the weighting reflects that zram does more compression than decompression). https://drive.google.com/file/d/1VLtLjRVxgUNuWFOxaGPwJYhl_hMQXpHe/view?usp=sharing Matt's patches help in all cases for Arm (and no effect on Intel), as expected. RLE also behaves as expected: with few zeros present, it makes no difference; above ~75%, it gives a good improvement (50 - 300 MB/s on top of the benefit from Matt's patches). Best performance is seen with both MS and RLE patches. Finally, I have benchmarked the same dataset on an x86-64 device. Here, the MS patches make no difference (as expected); RLE helps, similarly as on Arm. There were no definite regressions; allowing for observational error, 0.1% (3/4178) of cases had a regression > 1 standard deviation, of which the largest was 4.6% (1.2 standard deviations). I think this is probably within the noise. https://drive.google.com/file/d/1xCUVwmiGD0heEMx5gcVEmLBI4eLaageV/view?usp=sharing One point to note is that the graphs show RLE appears to help very slightly with no zeros present! This is because the extra code causes the clang optimiser to change code layout in a way that happens to have a significant benefit. Taking baseline LZO and adding a do-nothing line like "__builtin_prefetch(out_len);" immediately before the "goto next" has the same effect. So this is a real, but basically spurious effect - it's small enough not to upset the overall findings. This patch (of 3): When using zram, we frequently encounter long runs of zero bytes. This adds a special case which identifies runs of zeros and encodes them using run-length encoding. This is faster for both compression and decompresion. For high-entropy data which doesn't hit this case, impact is minimal. Compression ratio is within a few percent in all cases. This modifies the bitstream in a way which is backwards compatible (i.e., we can decompress old bitstreams, but old versions of lzo cannot decompress new bitstreams). Link: http://lkml.kernel.org/r/20190205155944.16007-2-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: fast 8-byte copy on arm64Matt Sealey
Enable faster 8-byte copies on arm64. Link: http://lkml.kernel.org/r/20181127161913.23863-6-dave.rodgman@arm.com Link: http://lkml.kernel.org/r/20190205141950.9058-4-dave.rodgman@arm.com Signed-off-by: Matt Sealey <matt.sealey@arm.com> Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: 64-bit CTZ on arm64Matt Sealey
LZO leaves some performance on the table by not realising that arm64 can optimize count-trailing-zeros bit operations. Add CONFIG_ARM64 to the checked definitions alongside CONFIG_X86_64 to enable the use of rbit/clz instructions on full 64-bit quantities. Link: http://lkml.kernel.org/r/20181127161913.23863-5-dave.rodgman@arm.com Link: http://lkml.kernel.org/r/20190205141950.9058-3-dave.rodgman@arm.com Signed-off-by: Matt Sealey <matt.sealey@arm.com> Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: tidy-up ifdefsDave Rodgman
Patch series "lib/lzo: performance improvements", v5. This patch (of 3): Modify the ifdefs in lzodefs.h to be more consistent with normal kernel macros (e.g., change __aarch64__ to CONFIG_ARM64). Link: http://lkml.kernel.org/r/20190205141950.9058-2-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-28lzo: check for length overrun in variable length encoding.Willy Tarreau
This fix ensures that we never meet an integer overflow while adding 255 while parsing a variable length encoding. It works differently from commit 206a81c ("lzo: properly check for overruns") because instead of ensuring that we don't overrun the input, which is tricky to guarantee due to many assumptions in the code, it simply checks that the cumulated number of 255 read cannot overflow by bounding this number. The MAX_255_COUNT is the maximum number of times we can add 255 to a base count without overflowing an integer. The multiply will overflow when multiplying 255 by more than MAXINT/255. The sum will overflow earlier depending on the base count. Since the base count is taken from a u8 and a few bits, it is safe to assume that it will always be lower than or equal to 2*255, thus we can always prevent any overflow by accepting two less 255 steps. This patch also reduces the CPU overhead and actually increases performance by 1.1% compared to the initial code, while the previous fix costs 3.1% (measured on x86_64). The fix needs to be backported to all currently supported stable kernels. Reported-by: Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-28Revert "lzo: properly check for overruns"Willy Tarreau
This reverts commit 206a81c ("lzo: properly check for overruns"). As analysed by Willem Pinckaers, this fix is still incomplete on certain rare corner cases, and it is easier to restart from the original code. Reported-by: Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-23lzo: properly check for overrunsGreg Kroah-Hartman
The lzo decompressor can, if given some really crazy data, possibly overrun some variable types. Modify the checking logic to properly detect overruns before they happen. Reported-by: "Don A. Bailey" <donb@securitymouse.com> Tested-by: "Don A. Bailey" <donb@securitymouse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-20lib/lzo: Update LZO compression to current upstream versionMarkus F.X.J. Oberhumer
This commit updates the kernel LZO code to the current upsteam version which features a significant speed improvement - benchmarking the Calgary and Silesia test corpora typically shows a doubled performance in both compression and decompression on modern i386/x86_64/powerpc machines. Signed-off-by: Markus F.X.J. Oberhumer <markus@oberhumer.com>
2013-02-20lib/lzo: Rename lzo1x_decompress.c to lzo1x_decompress_safe.cMarkus F.X.J. Oberhumer
Rename the source file to match the function name and thereby also make room for a possible future even slightly faster "non-safe" decompressor version. Signed-off-by: Markus F.X.J. Oberhumer <markus@oberhumer.com>
2010-01-11lib: add support for LZO-compressed kernelsAlbin Tonnerre
This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25lzo: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-10lzo: fix typo in decompressorHarvey Harrison
Shift of a LE value seems strange, probably meant to shift the cpu-order variable as in the prvious section of the switch statement. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31lzo: add some missing castsRichard Purdie
Add some casts to the LZO compression algorithm after they were removed during cleanup and shouldn't have been. Signed-off-by: Richard Purdie <rpurdie@openedhand.com> Cc: Edward Shishkin <edward@namesys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10Add LZO1X algorithm to the kernelRichard Purdie
This is a hybrid version of the patch to add the LZO1X compression algorithm to the kernel. Nitin and myself have merged the best parts of the various patches to form this version which we're both happy with (and are jointly signing off). The performance of this version is equivalent to the original minilzo code it was based on. Bytecode comparisons have also been made on ARM, i386 and x86_64 with favourable results. There are several users of LZO lined up including jffs2, crypto and reiser4 since its much faster than zlib. Signed-off-by: Nitin Gupta <nitingupta910@gmail.com> Signed-off-by: Richard Purdie <rpurdie@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>