| Age | Commit message (Collapse) | Author |
|---|
|
Mark slow memcpy KUnit tests using test attributes.
Tests marked as slow are as follows: memcpy_large_test, memmove_test,
memmove_large_test, and memmove_overlap_test. These tests were the slowest
of the memcpy tests and relatively slower to most other KUnit tests. Most
of these tests are already skipped when CONFIG_MEMCPY_SLOW_KUNIT_TEST is
not enabled.
These tests can now be filtered using the KUnit test attribute filtering
feature. Example: --filter "speed>slow". This will run only the tests that
have speeds faster than slow. The slow attribute will also be outputted in
KTAP.
Note: This patch is intended to replace the use of
CONFIG_MEMCPY_SLOW_KUNIT_TEST and to potentially deprecate this feature.
This patch does not remove the config option but does add a note to the
config definition commenting on this future shift.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since the long memcpy tests may stall a system for tens of seconds
in virtualized architecture environments, split those tests off under
CONFIG_MEMCPY_SLOW_KUNIT_TEST so they can be separately disabled.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20221226195206.GA2626419@roeck-us.net
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
|
When building ARCH=i386 with CONFIG_LTO_CLANG_FULL=y, it's possible
(depending on additional configs which I have not been able to isolate)
to observe a failure during register allocation:
error: inline assembly requires more registers than available
when memmove is inlined into tcp_v4_fill_cb() or tcp_v6_fill_cb().
memmove is quite large and probably shouldn't be inlined due to size
alone. A noinline function attribute would be the simplest fix, but
there's a few things that stand out with the current definition:
In addition to having complex constraints that can't always be resolved,
the clobber list seems to be missing %bx. By using numbered operands
rather than symbolic operands, the constraints are quite obnoxious to
refactor.
Having a large function be 99% inline asm is a code smell that this
function should simply be written in stand-alone out-of-line assembler.
Moving this to out of line assembler guarantees that the
compiler cannot inline calls to memmove.
This has been done previously for 64b:
commit 9599ec0471de ("x86-64, mem: Convert memmove() to assembly file
and fix return value bug")
That gives the opportunity for other cleanups like fixing the
inconsistent use of tabs vs spaces and instruction suffixes, and the
label 3 appearing twice. Symbolic operands, local labels, and
additional comments would provide this code with a fresh coat of paint.
Finally, add a test that tickles the `rep movsl` implementation to test
it for correctness, since it has implicit operands.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20221018172155.287409-1-ndesaulniers%40google.com
|
|
The "side effects" memmove() test accidentally found[1] a corner case in
the recent refactoring of the i386 assembly memmove(), but missed another
corner case. Instead of hoping to get lucky next time, implement much
more complete tests of memcpy() and memmove() -- especially the moving
window overlap for memmove() -- which catches all the issues encountered
and should catch anything new.
[1] https://lore.kernel.org/lkml/CAKwvOdkaKTa2aiA90VzFrChNQM6O_ro+b7VWs=op70jx-DKaXA@mail.gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The memcpy() KUnit tests are trying to sanity-check run-time behaviors,
but tripped compile-time warnings about a pathological condition of a
too-small buffer being used for input. Avoid this by explicitly resizing
the buffer, but leaving the string short. Avoid the following warning:
lib/memcpy_kunit.c: In function 'strtomem_test':
include/linux/string.h:303:42: warning: 'strnlen' specified bound 4 exceeds source size 3 [-Wstringop-overread]
303 | memcpy(dest, src, min(_dest_len, strnlen(src, _dest_len))); \
include/linux/minmax.h:32:39: note: in definition of macro '__cmp_once'
32 | typeof(y) unique_y = (y); \
| ^
include/linux/minmax.h:45:25: note: in expansion of macro '__careful_cmp'
45 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/string.h:303:27: note: in expansion of macro 'min'
303 | memcpy(dest, src, min(_dest_len, strnlen(src, _dest_len))); \
| ^~~
lib/memcpy_kunit.c:290:9: note: in expansion of macro 'strtomem'
290 | strtomem(wrap.output, input);
| ^~~~~~~~
lib/memcpy_kunit.c:275:27: note: source object allocated here
275 | static const char input[] = "hi";
| ^~~~~
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202209070728.o3stvgVt-lkp@intel.com
Fixes: dfbafa70bde2 ("string: Introduce strtomem() and strtomem_pad()")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
One of the "legitimate" uses of strncpy() is copying a NUL-terminated
string into a fixed-size non-NUL-terminated character array. To avoid
the weaknesses and ambiguity of intent when using strncpy(), provide
replacement functions that explicitly distinguish between trailing
padding and not, and require the destination buffer size be discoverable
by the compiler.
For example:
struct obj {
int foo;
char small[4] __nonstring;
char big[8] __nonstring;
int bar;
};
struct obj p;
/* This will truncate to 4 chars with no trailing NUL */
strncpy(p.small, "hello", sizeof(p.small));
/* p.small contains 'h', 'e', 'l', 'l' */
/* This will NUL pad to 8 chars. */
strncpy(p.big, "hello", sizeof(p.big));
/* p.big contains 'h', 'e', 'l', 'l', 'o', '\0', '\0', '\0' */
When the "__nonstring" attributes are missing, the intent of the
programmer becomes ambiguous for whether the lack of a trailing NUL
in the p.small copy is a bug. Additionally, it's not clear whether
the trailing padding in the p.big copy is _needed_. Both cases
become unambiguous with:
strtomem(p.small, "hello");
strtomem_pad(p.big, "hello", 0);
See also https://github.com/KSPP/linux/issues/90
Expand the memcpy KUnit tests to include these functions.
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
A common idiom in kernel code is to wipe the contents of a structure
starting from a given member. These open-coded cases are usually difficult
to read and very sensitive to struct layout changes. Like memset_after(),
introduce a new helper, memset_startat() that takes the target struct
instance, the byte to write, and the member name where zeroing should
start.
Note that this doesn't zero padding preceding the target member. For
those cases, memset_after() should be used on the preceding member.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
A common idiom in kernel code is to wipe the contents of a structure
after a given member. This is especially useful in places where there is
trailing padding. These open-coded cases are usually difficult to read
and very sensitive to struct layout changes. Introduce a new helper,
memset_after() that takes the target struct instance, the byte to write,
and the member name after which the zeroing should start.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Before changing anything about memcpy(), memmove(), and memset(), add
run-time tests to check basic behaviors for any regressions.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
