summaryrefslogtreecommitdiff
path: root/lib/nmi_backtrace.c
AgeCommit message (Collapse)Author
2023-08-18nmi_backtrace: allow excluding an arbitrary CPUDouglas Anderson
The APIs that allow backtracing across CPUs have always had a way to exclude the current CPU. This convenience means callers didn't need to find a place to allocate a CPU mask just to handle the common case. Let's extend the API to take a CPU ID to exclude instead of just a boolean. This isn't any more complex for the API to handle and allows the hardlockup detector to exclude a different CPU (the one it already did a trace for) without needing to find space for a CPU mask. Arguably, this new API also encourages safer behavior. Specifically if the caller wants to avoid tracing the current CPU (maybe because they already traced the current CPU) this makes it more obvious to the caller that they need to make sure that the current CPU ID can't change. [akpm@linux-foundation.org: fix trigger_allbutcpu_cpu_backtrace() stub] Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-19x86/nmi: Print reasons why backtrace NMIs are ignoredPaul E. McKenney
Instrument nmi_trigger_cpumask_backtrace() to dump out diagnostics based on evidence accumulated by exc_nmi(). These diagnostics are dumped for CPUs that ignored an NMI backtrace request for more than 10 seconds. [ paulmck: Apply Ingo Molnar feedback. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Reviewed-by: Ingo Molnar <mingo@kernel.org>
2022-04-22printk: rename cpulock functionsJohn Ogness
Since the printk cpulock is CPU-reentrant and since it is used in all contexts, its usage must be carefully considered and most likely will require programming locklessly. To avoid mistaking the printk cpulock as a typical lock, rename it to cpu_sync. The main functions then become: printk_cpu_sync_get_irqsave(flags); printk_cpu_sync_put_irqrestore(flags); Add extra notes of caution in the function description to help developers understand the requirements for correct usage. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220421212250.565456-2-john.ogness@linutronix.de
2021-11-10printk: restore flushing of NMI buffers on remote CPUs after NMI backtracesNicholas Piggin
printk from NMI context relies on irq work being raised on the local CPU to print to console. This can be a problem if the NMI was raised by a lockup detector to print lockup stack and regs, because the CPU may not enable irqs (because it is locked up). Introduce printk_trigger_flush() that can be called another CPU to try to get those messages to the console, call that where printk_safe_flush was previously called. Fixes: 93d102f094be ("printk: remove safe buffers") Cc: stable@vger.kernel.org # 5.15 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20211107045116.1754411-1-npiggin@gmail.com
2021-07-30lib/nmi_backtrace: Serialize even messages about idle CPUsPetr Mladek
The commit 55d6af1d66885059ffc2a ("lib/nmi_backtrace: explicitly serialize banner and regs") serialized backtraces from more CPUs using the re-entrant printk_printk_cpu lock. It was a preparation step for removing the obsolete nmi_safe buffers. The single-line messages about idle CPUs were not serialized against other CPUs and might appear in the middle of backtrace from another CPU, for example: [56394.590068] NMI backtrace for cpu 2 [56394.590069] CPU: 2 PID: 444 Comm: systemd-journal Not tainted 5.14.0-rc1-default+ #268 [56394.590071] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 [56394.590072] RIP: 0010:lock_is_held_type+0x0/0x120 [56394.590071] NMI backtrace for cpu 0 skipped: idling at native_safe_halt+0xb/0x10 [56394.590076] Code: a2 38 ff 0f 0b 8b 44 24 04 eb bd 48 8d ... [56394.590077] RSP: 0018:ffffab02c07c7e68 EFLAGS: 00000246 [56394.590079] RAX: 0000000000000000 RBX: ffff9a7bc0ec8a40 RCX: ffffffffaab8eb40 It might cause confusion what CPU the following lines belongs to and whether the backtraces are really serialized. Prevent the confusion and serialize also the single line message against other CPUs. Fixes: 55d6af1d66885059ffc2a ("lib/nmi_backtrace: explicitly serialize banner and regs") Reviewed-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210727080939.27193-1-pmladek@suse.com
2021-07-26printk: remove safe buffersJohn Ogness
With @logbuf_lock removed, the high level printk functions for storing messages are lockless. Messages can be stored from any context, so there is no need for the NMI and safe buffers anymore. Remove the NMI and safe buffers. Although the safe buffers are removed, the NMI and safe context tracking is still in place. In these contexts, store the message immediately but still use irq_work to defer the console printing. Since printk recursion tracking is in place, safe context tracking for most of printk is not needed. Remove it. Only safe context tracking relating to the console and console_owner locks is left in place. This is because the console and console_owner locks are needed for the actual printing. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210715193359.25946-4-john.ogness@linutronix.de
2021-07-26lib/nmi_backtrace: explicitly serialize banner and regsJohn Ogness
Currently the nmi_backtrace is serialized against other CPUs because the messages are sent to the NMI buffers. Once these buffers are removed, only the dumped stack will be serialized against other CPUs (via the printk_cpu_lock). Also serialize the nmi_backtrace banner and regs using the printk_cpu_lock so that per-CPU serialization will be preserved even after the NMI buffers are removed. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210715193359.25946-2-john.ogness@linutronix.de
2020-08-24lib: Add backtrace_idle parameter to force backtrace of idle CPUsPaul E. McKenney
Currently, the nmi_cpu_backtrace() declines to produce backtraces for idle CPUs. This is a good choice in the common case in which problems are caused only by non-idle CPUs. However, there are occasionally situations in which idle CPUs are helping to cause problems. This commit therefore adds an nmi_backtrace.backtrace_idle kernel boot parameter that causes nmi_cpu_backtrace() to dump stacks even of idle CPUs. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-doc@vger.kernel.org>
2018-07-09printk/nmi: Prevent deadlock when accessing the main log buffer in NMIPetr Mladek
The commit 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI when logbuf_lock is available") brought back the possible deadlocks in printk() and NMI. The check of logbuf_lock is done only in printk_nmi_enter() to prevent mixed output. But another CPU might take the lock later, enter NMI, and: + Both NMIs might be serialized by yet another lock, for example, the one in nmi_cpu_backtrace(). + The other CPU might get stopped in NMI, see smp_send_stop() in panic(). The only safe solution is to use trylock when storing the message into the main log-buffer. It might cause reordering when some lines go to the main lock buffer directly and others are delayed via the per-CPU buffer. It means that it is not useful in general. This patch replaces the problematic NMI deferred context with NMI direct context. It can be used to mark a code that might produce many messages in NMI and the risk of losing them is more critical than problems with eventual reordering. The context is then used when dumping trace buffers on oops. It was the primary motivation for the original fix. Also the reordering is even smaller issue there because some traces have their own time stamps. Finally, nmi_cpu_backtrace() need not longer be serialized because it will always us the per-CPU buffers again. Fixes: 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI when logbuf_lock is available") Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180627142028.11259-1-pmladek@suse.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-11-17lib/nmi_backtrace.c: fix kernel text address leakLiu, Changcheng
Don't leak idle function address in NMI backtrace. Link: http://lkml.kernel.org/r/20171106165648.GA95243@sofia Signed-off-by: Liu Changcheng <changcheng.liu@intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-19printk: Use the main logbuf in NMI when logbuf_lock is availablePetr Mladek
The commit 42a0bb3f71383b457a7d ("printk/nmi: generic solution for safe printk in NMI") caused that printk stores messages into a temporary buffer in NMI context. The buffer is per-CPU and therefore the size is rather limited. It works quite well for NMI backtraces. But there are longer logs that might get printed in NMI context, for example, lockdep warnings, ftrace_dump_on_oops. The temporary buffer is used to avoid deadlocks caused by logbuf_lock. Also it is needed to avoid races with the other temporary buffer that is used when PRINTK_SAFE_CONTEXT is entered. But the main buffer can be used in NMI if the lock is available and we did not interrupt PRINTK_SAFE_CONTEXT. The lock is checked using raw_spin_is_locked(). It might cause false negatives when the lock is taken on another CPU and this CPU is in the safe context from other reasons. Note that the safe context is used also to get console semaphore or when calling console drivers. For this reason, we do the check in printk_nmi_enter(). It makes the handling consistent for the entire NMI handler and avoids reshuffling of the messages. The patch also defines special printk context that allows to use printk_deferred() in NMI. Note that we could not flush the messages to the consoles because console drivers might use many other internal locks. The newly created vprintk_deferred() disables the preemption only around the irq work handling. It is needed there to keep the consistency between the two per-CPU variables. But there is no reason to disable preemption around vprintk_emit(). Finally, the patch puts back explicit serialization of the NMI backtraces from different CPUs. It was removed by the commit a9edc88093287183ac934b ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). It was not needed because the flushing of the temporary per-CPU buffers was serialized. Link: http://lkml.kernel.org/r/1493912763-24873-1-git-send-email-pmladek@suse.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rack+kernel@arm.linux.org.uk> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: x86@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-08printk: rename nmi.c and exported apiSergey Senozhatsky
A preparation patch for printk_safe work. No functional change. - rename nmi.c to print_safe.c - add `printk_safe' prefix to some (which used both by printk-safe and printk-nmi) of the exported functions. Link: http://lkml.kernel.org/r/20161227141611.940-3-sergey.senozhatsky@gmail.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Calvin Owens <calvinowens@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2016-10-07nmi_backtrace: generate one-line reports for idle cpusChris Metcalf
When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Tested-by: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07nmi_backtrace: do a local dump_stack() instead of a self-NMIChris Metcalf
Currently on arm there is code that checks whether it should call dump_stack() explicitly, to avoid trying to raise an NMI when the current context is not preemptible by the backtrace IPI. Similarly, the forthcoming arch/tile support uses an IPI mechanism that does not support generating an NMI to self. Accordingly, move the code that guards this case into the generic mechanism, and invoke it unconditionally whenever we want a backtrace of the current cpu. It seems plausible that in all cases, dump_stack() will generate better information than generating a stack from the NMI handler. The register state will be missing, but that state is likely not particularly helpful in any case. Or, if we think it is helpful, we should be capturing and emitting the current register state in all cases when regs == NULL is passed to nmi_cpu_backtrace(). Link: http://lkml.kernel.org/r/1472487169-14923-3-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Aaron Tomlin <atomlin@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07nmi_backtrace: add more trigger_*_cpu_backtrace() methodsChris Metcalf
Patch series "improvements to the nmi_backtrace code" v9. This patch series modifies the trigger_xxx_backtrace() NMI-based remote backtracing code to make it more flexible, and makes a few small improvements along the way. The motivation comes from the task isolation code, where there are scenarios where we want to be able to diagnose a case where some cpu is about to interrupt a task-isolated cpu. It can be helpful to see both where the interrupting cpu is, and also an approximation of where the cpu that is being interrupted is. The nmi_backtrace framework allows us to discover the stack of the interrupted cpu. I've tested that the change works as desired on tile, and build-tested x86, arm, mips, and sparc64. For x86 I confirmed that the generic cpuidle stuff as well as the architecture-specific routines are in the new cpuidle section. For arm, mips, and sparc I just build-tested it and made sure the generic cpuidle routines were in the new cpuidle section, but I didn't attempt to figure out which the platform-specific idle routines might be. That might be more usefully done by someone with platform experience in follow-up patches. This patch (of 4): Currently you can only request a backtrace of either all cpus, or all cpus but yourself. It can also be helpful to request a remote backtrace of a single cpu, and since we want that, the logical extension is to support a cpumask as the underlying primitive. This change modifies the existing lib/nmi_backtrace.c code to take a cpumask as its basic primitive, and modifies the linux/nmi.h code to use the new "cpumask" method instead. The existing clients of nmi_backtrace (arm and x86) are converted to using the new cpumask approach in this change. The other users of the backtracing API (sparc64 and mips) are converted to use the cpumask approach rather than the all/allbutself approach. The mips code ignored the "include_self" boolean but with this change it will now also dump a local backtrace if requested. Link: http://lkml.kernel.org/r/1472487169-14923-2-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20printk/nmi: generic solution for safe printk in NMIPetr Mladek
printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-03ARM: 8439/1: Fix backtrace generation when IPI is maskedDaniel Thompson
Currently on ARM when <SysRq-L> is triggered from an interrupt handler (e.g. a SysRq issued using UART or kbd) the main CPU will wedge for ten seconds with interrupts masked before issuing a backtrace for every CPU except itself. The new backtrace code introduced by commit 96f0e00378d4 ("ARM: add basic support for on-demand backtrace of other CPUs") does not work correctly when run from an interrupt handler because IPI_CPU_BACKTRACE is used to generate the backtrace on all CPUs but cannot preempt the current calling context. This can be fixed by detecting that the calling context cannot be preempted and issuing the backtrace directly in this case. Issuing directly leaves us without any pt_regs to pass to nmi_cpu_backtrace() so we also modify the generic code to call dump_stack() when its argument is NULL. Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-07-17nmi: create generic NMI backtrace implementationRussell King
x86s NMI backtrace implementation (for arch_trigger_all_cpu_backtrace()) is fairly generic in nature - the only architecture specific bits are the act of raising the NMI to other CPUs, and reporting the status of the NMI handler. These are fairly simple to factor out, and produce a generic implementation which can be shared between ARM and x86. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>