summaryrefslogtreecommitdiff
path: root/mm/Kconfig
AgeCommit message (Collapse)Author
2020-04-08Merge tag 'libnvdimm-for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ...
2020-04-07mm/zswap: allow setting default status, compressor and allocator in KconfigMaciej S. Szmigiero
The compressed cache for swap pages (zswap) currently needs from 1 to 3 extra kernel command line parameters in order to make it work: it has to be enabled by adding a "zswap.enabled=1" command line parameter and if one wants a different compressor or pool allocator than the default lzo / zbud combination then these choices also need to be specified on the kernel command line in additional parameters. Using a different compressor and allocator for zswap is actually pretty common as guides often recommend using the lz4 / z3fold pair instead of the default one. In such case it is also necessary to remember to enable the appropriate compression algorithm and pool allocator in the kernel config manually. Let's avoid the need for adding these kernel command line parameters and automatically pull in the dependencies for the selected compressor algorithm and pool allocator by adding an appropriate default switches to Kconfig. The default values for these options match what the code was using previously as its defaults. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Link: http://lkml.kernel.org/r/20200202000112.456103-1-mail@maciej.szmigiero.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07mm: introduce Reported pagesAlexander Duyck
In order to pave the way for free page reporting in virtualized environments we will need a way to get pages out of the free lists and identify those pages after they have been returned. To accomplish this, this patch adds the concept of a Reported Buddy, which is essentially meant to just be the Uptodate flag used in conjunction with the Buddy page type. To prevent the reported pages from leaking outside of the buddy lists I added a check to clear the PageReported bit in the del_page_from_free_list function. As a result any reported page that is split, merged, or allocated will have the flag cleared prior to the PageBuddy value being cleared. The process for reporting pages is fairly simple. Once we free a page that meets the minimum order for page reporting we will schedule a worker thread to start 2s or more in the future. That worker thread will begin working from the lowest supported page reporting order up to MAX_ORDER - 1 pulling unreported pages from the free list and storing them in the scatterlist. When processing each individual free list it is necessary for the worker thread to release the zone lock when it needs to stop and report the full scatterlist of pages. To reduce the work of the next iteration the worker thread will rotate the free list so that the first unreported page in the free list becomes the first entry in the list. It will then call a reporting function providing information on how many entries are in the scatterlist. Once the function completes it will return the pages to the free area from which they were allocated and start over pulling more pages from the free areas until there are no longer enough pages to report on to keep the worker busy, or we have processed as many pages as were contained in the free area when we started processing the list. The worker thread will work in a round-robin fashion making its way though each zone requesting reporting, and through each reportable free list within that zone. Once all free areas within the zone have been processed it will check to see if there have been any requests for reporting while it was processing. If so it will reschedule the worker thread to start up again in roughly 2s and exit. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224635.29318.19750.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07mm: remove CONFIG_TRANSPARENT_HUGE_PAGECACHEMatthew Wilcox (Oracle)
Commit e496cf3d7821 ("thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE") notes that it should be reverted when the PowerPC problem was fixed. The commit fixing the PowerPC problem (953c66c2b22a) did not revert the commit; instead setting CONFIG_TRANSPARENT_HUGE_PAGECACHE to the same as CONFIG_TRANSPARENT_HUGEPAGE. Checking with Kirill and Aneesh, this was an oversight, so remove the Kconfig symbol and undo the work of commit e496cf3d7821. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Link: http://lkml.kernel.org/r/20200318140253.6141-6-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-17x86/mm: Introduce CONFIG_NUMA_KEEP_MEMINFODan Williams
Currently x86 numa_meminfo is marked __initdata in the CONFIG_MEMORY_HOTPLUG=n case. In support of a new facility to allow drivers to map reserved memory to a 'target_node' (phys_to_target_node()), add support for removing the __initdata designation for those users. Both memory hotplug and phys_to_target_node() users select CONFIG_NUMA_KEEP_MEMINFO to tell the arch to maintain its physical address to NUMA mapping infrastructure post init. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/158188326422.894464.15742054998046628934.stgit@dwillia2-desk3.amr.corp.intel.com
2019-12-01mm/Kconfig: fix trivial help text punctuationRandy Dunlap
End a Kconfig help text sentence with a period (aka full stop). Link: http://lkml.kernel.org/r/c17f2c75-dc2a-42a4-2229-bb6b489addf2@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm/Kconfig: fix indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ / /' -i */Kconfig Link: http://lkml.kernel.org/r/1574306437-28837-1-git-send-email-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-30Merge tag 'for-linus-hmm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is another round of bug fixing and cleanup. This time the focus is on the driver pattern to use mmu notifiers to monitor a VA range. This code is lifted out of many drivers and hmm_mirror directly into the mmu_notifier core and written using the best ideas from all the driver implementations. This removes many bugs from the drivers and has a very pleasing diffstat. More drivers can still be converted, but that is for another cycle. - A shared branch with RDMA reworking the RDMA ODP implementation - New mmu_interval_notifier API. This is focused on the use case of monitoring a VA and simplifies the process for drivers - A common seq-count locking scheme built into the mmu_interval_notifier API usable by drivers that call get_user_pages() or hmm_range_fault() with the VA range - Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev drivers to the new API. This deletes a lot of wonky driver code. - Two improvements for hmm_range_fault(), from testing done by Ralph" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap mm/hmm: make full use of walk_page_range() xen/gntdev: use mmu_interval_notifier_insert mm/hmm: remove hmm_mirror and related drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror drm/amdgpu: Call find_vma under mmap_sem nouveau: use mmu_interval_notifier instead of hmm_mirror nouveau: use mmu_notifier directly for invalidate_range_start drm/radeon: use mmu_interval_notifier_insert RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv RDMA/odp: Use mmu_interval_notifier_insert() mm/hmm: define the pre-processor related parts of hmm.h even if disabled mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror mm/mmu_notifier: add an interval tree notifier mm/mmu_notifier: define the header pre-processor parts even if disabled mm/hmm: allow snapshot of the special zero page
2019-11-23mm/hmm: remove hmm_mirror and relatedJason Gunthorpe
The only two users of this are now converted to use mmu_interval_notifier, delete all the code and update hmm.rst. Link: https://lore.kernel.org/r/20191112202231.3856-14-jgg@ziepe.ca Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-23mm/mmu_notifier: add an interval tree notifierJason Gunthorpe
Of the 13 users of mmu_notifiers, 8 of them use only invalidate_range_start/end() and immediately intersect the mmu_notifier_range with some kind of internal list of VAs. 4 use an interval tree (i915_gem, radeon_mn, umem_odp, hfi1). 4 use a linked list of some kind (scif_dma, vhost, gntdev, hmm) And the remaining 5 either don't use invalidate_range_start() or do some special thing with it. It turns out that building a correct scheme with an interval tree is pretty complicated, particularly if the use case is synchronizing against another thread doing get_user_pages(). Many of these implementations have various subtle and difficult to fix races. This approach puts the interval tree as common code at the top of the mmu notifier call tree and implements a shareable locking scheme. It includes: - An interval tree tracking VA ranges, with per-range callbacks - A read/write locking scheme for the interval tree that avoids sleeping in the notifier path (for OOM killer) - A sequence counter based collision-retry locking scheme to tell device page fault that a VA range is being concurrently invalidated. This is based on various ideas: - hmm accumulates invalidated VA ranges and releases them when all invalidates are done, via active_invalidate_ranges count. This approach avoids having to intersect the interval tree twice (as umem_odp does) at the potential cost of a longer device page fault. - kvm/umem_odp use a sequence counter to drive the collision retry, via invalidate_seq - a deferred work todo list on unlock scheme like RTNL, via deferred_list. This makes adding/removing interval tree members more deterministic - seqlock, except this version makes the seqlock idea multi-holder on the write side by protecting it with active_invalidate_ranges and a spinlock To minimize MM overhead when only the interval tree is being used, the entire SRCU and hlist overheads are dropped using some simple branches. Similarly the interval tree overhead is dropped when in hlist mode. The overhead from the mandatory spinlock is broadly the same as most of existing users which already had a lock (or two) of some sort on the invalidation path. Link: https://lore.kernel.org/r/20191112202231.3856-3-jgg@ziepe.ca Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06mm: Add write-protect and clean utilities for address space rangesThomas Hellstrom
Add two utilities to 1) write-protect and 2) clean all ptes pointing into a range of an address space. The utilities are intended to aid in tracking dirty pages (either driver-allocated system memory or pci device memory). The write-protect utility should be used in conjunction with page_mkwrite() and pfn_mkwrite() to trigger write page-faults on page accesses. Typically one would want to use this on sparse accesses into large memory regions. The clean utility should be used to utilize hardware dirtying functionality and avoid the overhead of page-faults, typically on large accesses into small memory regions. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Andrew Morton <akpm@linux-foundation.org>
2019-09-24mm,thp: add read-only THP support for (non-shmem) FSSong Liu
This patch is (hopefully) the first step to enable THP for non-shmem filesystems. This patch enables an application to put part of its text sections to THP via madvise, for example: madvise((void *)0x600000, 0x200000, MADV_HUGEPAGE); We tried to reuse the logic for THP on tmpfs. Currently, write is not supported for non-shmem THP. khugepaged will only process vma with VM_DENYWRITE. sys_mmap() ignores VM_DENYWRITE requests (see ksys_mmap_pgoff). The only way to create vma with VM_DENYWRITE is execve(). This requirement limits non-shmem THP to text sections. The next patch will handle writes, which would only happen when the all the vmas with VM_DENYWRITE are unmapped. An EXPERIMENTAL config, READ_ONLY_THP_FOR_FS, is added to gate this feature. [songliubraving@fb.com: fix build without CONFIG_SHMEM] Link: http://lkml.kernel.org/r/F53407FB-96CC-42E8-9862-105C92CC2B98@fb.com [songliubraving@fb.com: fix double unlock in collapse_file()] Link: http://lkml.kernel.org/r/B960CBFA-8EFC-4DA4-ABC5-1977FFF2CA57@fb.com Link: http://lkml.kernel.org/r/20190801184244.3169074-7-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm: remove quicklist page table cachesNicholas Piggin
Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-20mm: remove CONFIG_MIGRATE_VMA_HELPERChristoph Hellwig
CONFIG_MIGRATE_VMA_HELPER guards helpers that are required for proper devic private memory support. Remove the option and just check for CONFIG_DEVICE_PRIVATE instead. Link: https://lore.kernel.org/r/20190814075928.23766-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07mm/hmm: make HMM_MIRROR an implicit optionChristoph Hellwig
Make HMM_MIRROR an option that is selected by drivers wanting to use it instead of a user visible option as it is just a low-level implementation detail. Link: https://lore.kernel.org/r/20190806160554.14046-15-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07mm/hmm: allow HMM_MIRROR on all architectures with MMUChristoph Hellwig
There isn't really any architecture specific code in this page table walk implementation, so drop the dependencies. Link: https://lore.kernel.org/r/20190806160554.14046-14-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-16mm: introduce ARCH_HAS_PTE_DEVMAPRobin Murphy
ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined with the long-out-of-date comment can lead to the impression than an architecture may just enable it (since __add_pages() now "comprehends device memory" for itself) and expect things to work. In practice, however, ZONE_DEVICE users have little chance of functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper dependency so the real situation is clearer. Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-14Merge tag 'for-linus-hmm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull HMM updates from Jason Gunthorpe: "Improvements and bug fixes for the hmm interface in the kernel: - Improve clarity, locking and APIs related to the 'hmm mirror' feature merged last cycle. In linux-next we now see AMDGPU and nouveau to be using this API. - Remove old or transitional hmm APIs. These are hold overs from the past with no users, or APIs that existed only to manage cross tree conflicts. There are still a few more of these cleanups that didn't make the merge window cut off. - Improve some core mm APIs: - export alloc_pages_vma() for driver use - refactor into devm_request_free_mem_region() to manage DEVICE_PRIVATE resource reservations - refactor duplicative driver code into the core dev_pagemap struct - Remove hmm wrappers of improved core mm APIs, instead have drivers use the simplified API directly - Remove DEVICE_PUBLIC - Simplify the kconfig flow for the hmm users and core code" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits) mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR mm: remove the HMM config option mm: sort out the DEVICE_PRIVATE Kconfig mess mm: simplify ZONE_DEVICE page private data mm: remove hmm_devmem_add mm: remove hmm_vma_alloc_locked_page nouveau: use devm_memremap_pages directly nouveau: use alloc_page_vma directly PCI/P2PDMA: use the dev_pagemap internal refcount device-dax: use the dev_pagemap internal refcount memremap: provide an optional internal refcount in struct dev_pagemap memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag memremap: remove the data field in struct dev_pagemap memremap: add a migrate_to_ram method to struct dev_pagemap_ops memremap: lift the devmap_enable manipulation into devm_memremap_pages memremap: pass a struct dev_pagemap to ->kill and ->cleanup memremap: move dev_pagemap callbacks into a separate structure memremap: validate the pagemap type passed to devm_memremap_pages mm: factor out a devm_request_free_mem_region helper mm: export alloc_pages_vma ...
2019-07-12mm: move the powerpc hugepd code to mm/gup.cChristoph Hellwig
While only powerpc supports the hugepd case, the code is pretty generic and I'd like to keep all GUP internals in one place. Link: http://lkml.kernel.org/r/20190625143715.1689-15-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm: consolidate the get_user_pages* implementationsChristoph Hellwig
Always build mm/gup.c so that we don't have to provide separate nommu stubs. Also merge the get_user_pages_fast and __get_user_pages_fast stubs when HAVE_FAST_GUP into the main implementations, which will never call the fast path if HAVE_FAST_GUP is not set. This also ensures the new put_user_pages* helpers are available for nommu, as those are currently missing, which would create a problem as soon as we actually grew users for it. Link: http://lkml.kernel.org/r/20190625143715.1689-13-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm: rename CONFIG_HAVE_GENERIC_GUP to CONFIG_HAVE_FAST_GUPChristoph Hellwig
We only support the generic GUP now, so rename the config option to be more clear, and always use the mm/Kconfig definition of the symbol and select it from the arch Kconfigs. Link: http://lkml.kernel.org/r/20190625143715.1689-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm: lift the x86_32 PAE version of gup_get_pte to common codeChristoph Hellwig
The split low/high access is the only non-READ_ONCE version of gup_get_pte that did show up in the various arch implemenations. Lift it to common code and drop the ifdef based arch override. Link: http://lkml.kernel.org/r/20190625143715.1689-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-02mm: don't select MIGRATE_VMA_HELPER from HMM_MIRRORChristoph Hellwig
The migrate_vma helper is only used by noveau to migrate device private pages around. Other HMM_MIRROR users like amdgpu or infiniband don't need it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: remove the HMM config optionChristoph Hellwig
All the mm/hmm.c code is better keyed off HMM_MIRROR. Also let nouveau depend on it instead of the mix of a dummy dependency symbol plus the actually selected one. Drop various odd dependencies, as the code is pretty portable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: sort out the DEVICE_PRIVATE Kconfig messChristoph Hellwig
The ZONE_DEVICE support doesn't depend on anything HMM related, just on various bits of arch support as indicated by the architecture. Also don't select the option from nouveau as it isn't present in many setups, and depend on it instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: remove MEMORY_DEVICE_PUBLIC supportChristoph Hellwig
The code hasn't been used since it was added to the tree, and doesn't appear to actually be usable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02mm: remove the unused ARCH_HAS_HMM_DEVICE Kconfig optionChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-14Merge tag 'v5.2-rc4' into mauroJonathan Corbet
We need to pick up post-rc1 changes to various document files so they don't get lost in Mauro's massive RST conversion push.
2019-06-08docs: fix broken documentation linksMauro Carvalho Chehab
Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mm/Kconfig: update "Memory Model" help textMike Rapoport
The help describing the memory model selection is outdated. It still says that SPARSEMEM is experimental and DISCONTIGMEM is a preferred over SPARSEMEM. Update the help text for the relevant options: * add a generic help for the "Memory Model" prompt * add description for FLATMEM * reduce the description of DISCONTIGMEM and add a deprecation note * prefer SPARSEMEM over DISCONTIGMEM Link: http://lkml.kernel.org/r/1556188531-20728-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm: memblock: make keeping memblock memory opt-in rather than opt-outMike Rapoport
Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE KconfigJérôme Glisse
Add 2 new Kconfig variables that are not used by anyone. I check that various make ARCH=somearch allmodconfig do work and do not complain. This new Kconfig needs to be added first so that device drivers that depend on HMM can be updated. Once drivers are updated then I can update the HMM Kconfig to depend on this new Kconfig in a followup patch. This is about solving Kconfig for HMM given that device driver are going through their own tree we want to avoid changing them from the mm tree. So plan is: 1 - Kernel release N add the new Kconfig to mm/Kconfig (this patch) 2 - Kernel release N+1 update driver to depend on new Kconfig ie stop using ARCH_HASH_HMM and start using ARCH_HAS_HMM_MIRROR and ARCH_HAS_HMM_DEVICE (one or the other or both depending on the driver) 3 - Kernel release N+2 remove ARCH_HASH_HMM and do final Kconfig update in mm/Kconfig Link: http://lkml.kernel.org/r/20190417211141.17580-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm: remove redundant 'default n' from Kconfig-sBartlomiej Zolnierkiewicz
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Link: http://lkml.kernel.org/r/c3385916-e4d4-37d3-b330-e6b7dff83a52@samsung.com Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/hmm: select mmu notifier when selecting HMMJérôme Glisse
To avoid random config build issue, select mmu notifier when HMM is selected. In any cases when HMM get selected it will be by users that will also wants the mmu notifier. Link: http://lkml.kernel.org/r/20190403193318.16478-2-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm: simplify MEMORY_ISOLATION && COMPACTION || CMA into CONTIG_ALLOCAlexandre Ghiti
This condition allows to define alloc_contig_range, so simplify it into a more accurate naming. Link: http://lkml.kernel.org/r/20190327063626.18421-4-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28ksm: replace jhash2 with xxhashTimofey Titovets
Replace jhash2 with xxhash. Perf numbers: Intel(R) Xeon(R) CPU E5-2420 v2 @ 2.20GHz ksm: crc32c hash() 12081 MB/s ksm: xxh64 hash() 8770 MB/s ksm: xxh32 hash() 4529 MB/s ksm: jhash2 hash() 1569 MB/s Sioh Lee did some testing: crc32c_intel: 1084.10ns crc32c (no hardware acceleration): 7012.51ns xxhash32: 2227.75ns xxhash64: 1413.16ns jhash2: 5128.30ns As jhash2 always will be slower (for data size like PAGE_SIZE). Don't use it in ksm at all. Use only xxhash for now, because for using crc32c, cryptoapi must be initialized first - that requires some tricky solution to work well in all situations. Link: http://lkml.kernel.org/r/20181023182554.23464-3-nefelim4ag@gmail.com Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com> Signed-off-by: leesioh <solee@os.korea.ac.kr> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove CONFIG_HAVE_MEMBLOCKMike Rapoport
All architecures use memblock for early memory management. There is no need for the CONFIG_HAVE_MEMBLOCK configuration option. [rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs] Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx [rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal] Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx [rppt@linux.vnet.ibm.com: remove stale #else and the code it protects] Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove CONFIG_NO_BOOTMEMMike Rapoport
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any kernel configuration and therefore it can be removed. [alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init] Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-21radix tree: Remove multiorder supportMatthew Wilcox
All users have now been converted to the XArray. Removing the support reduces code size and ensures new users will use the XArray instead. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-09-20mm: disable deferred struct page for 32-bit archesPasha Tatashin
Deferred struct page init is needed only on systems with large amount of physical memory to improve boot performance. 32-bit systems do not benefit from this feature. Jiri reported a problem where deferred struct pages do not work well with x86-32: [ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036269] Initializing CPU#0 [ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0) [ 0.038459] page:f6780000 is uninitialized and poisoned [ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) [ 0.040038] ------------[ cut here ]------------ [ 0.040399] kernel BUG at include/linux/page-flags.h:293! [ 0.040823] invalid opcode: 0000 [#1] SMP PTI [ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9 [ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 0.042496] EIP: free_highmem_page+0x64/0x80 [ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71 [ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8 [ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc [ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086 [ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690 [ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.046913] DR6: fffe0ff0 DR7: 00000400 [ 0.047220] Call Trace: [ 0.047419] add_highpages_with_active_regions+0xbd/0x10d [ 0.047854] set_highmem_pages_init+0x5b/0x71 [ 0.048202] mem_init+0x2b/0x1e8 [ 0.048460] start_kernel+0x1d2/0x425 [ 0.048757] i386_start_kernel+0x93/0x97 [ 0.049073] startup_32_smp+0x164/0x168 [ 0.049379] Modules linked in: [ 0.049626] ---[ end trace 337949378db0abbb ]--- We free highmem pages before their struct pages are initialized: mem_init() set_highmem_pages_init() add_highpages_with_active_regions() free_highmem_page() .. Access uninitialized struct page here.. Because there is no reason to have this feature on 32-bit systems, just disable it. Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements") Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reported-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-17mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAPHuang Ying
CONFIG_THP_SWAP should depend on CONFIG_SWAP, because it's unreasonable to optimize swapping for THP (Transparent Huge Page) without basic swapping support. In original code, when CONFIG_SWAP=n and CONFIG_THP_SWAP=y, split_swap_cluster() will not be built because it is in swapfile.c, but it will be called in huge_memory.c. This doesn't trigger a build error in practice because the call site is enclosed by PageSwapCache(), which is defined to be constant 0 when CONFIG_SWAP=n. But this is fragile and should be fixed. The comments are fixed too to reflect the latest progress. Link: http://lkml.kernel.org/r/20180713021228.439-1-ying.huang@intel.com Fixes: 38d8b4e6bdc8 ("mm, THP, swap: delay splitting THP during swap out") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm/sparse: delete old sparse_init and enable new onePavel Tatashin
Rename new_sparse_init() to sparse_init() which enables it. Delete old sparse_init() and all the code that became obsolete with. [pasha.tatashin@oracle.com: remove unused sparse_mem_maps_populate_node()] Link: http://lkml.kernel.org/r/20180716174447.14529-6-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180712203730.8703-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Tested-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm: make DEFERRED_STRUCT_PAGE_INIT explicitly depend on SPARSEMEMMike Rapoport
The deferred memory initialization relies on section definitions, e.g PAGES_PER_SECTION, that are only available when CONFIG_SPARSEMEM=y on most architectures. Initially DEFERRED_STRUCT_PAGE_INIT depended on explicit ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT configuration option, but since the commit 2e3ca40f03bb13709df4 ("mm: relax deferred struct page requirements") this requirement was relaxed and now it is possible to enable DEFERRED_STRUCT_PAGE_INIT on architectures that support DISCONTINGMEM and NO_BOOTMEM which causes build failures. For instance, setting SMP=y and DEFERRED_STRUCT_PAGE_INIT=y on arc causes the following build failure: CC mm/page_alloc.o mm/page_alloc.c: In function 'update_defer_init': mm/page_alloc.c:321:14: error: 'PAGES_PER_SECTION' undeclared (first use in this function); did you mean 'USEC_PER_SEC'? (pfn & (PAGES_PER_SECTION - 1)) == 0) { ^~~~~~~~~~~~~~~~~ USEC_PER_SEC mm/page_alloc.c:321:14: note: each undeclared identifier is reported only once for each function it appears in In file included from include/linux/cache.h:5:0, from include/linux/printk.h:9, from include/linux/kernel.h:14, from include/asm-generic/bug.h:18, from arch/arc/include/asm/bug.h:32, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/mm.h:9, from mm/page_alloc.c:18: mm/page_alloc.c: In function 'deferred_grow_zone': mm/page_alloc.c:1624:52: error: 'PAGES_PER_SECTION' undeclared (first use in this function); did you mean 'USEC_PER_SEC'? unsigned long nr_pages_needed = ALIGN(1 << order, PAGES_PER_SECTION); ^ include/uapi/linux/kernel.h:11:47: note: in definition of macro '__ALIGN_KERNEL_MASK' #define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) ^~~~ include/linux/kernel.h:58:22: note: in expansion of macro '__ALIGN_KERNEL' #define ALIGN(x, a) __ALIGN_KERNEL((x), (a)) ^~~~~~~~~~~~~~ mm/page_alloc.c:1624:34: note: in expansion of macro 'ALIGN' unsigned long nr_pages_needed = ALIGN(1 << order, PAGES_PER_SECTION); ^~~~~ In file included from include/asm-generic/bug.h:18:0, from arch/arc/include/asm/bug.h:32, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/mm.h:9, from mm/page_alloc.c:18: mm/page_alloc.c: In function 'free_area_init_node': mm/page_alloc.c:6379:50: error: 'PAGES_PER_SECTION' undeclared (first use in this function); did you mean 'USEC_PER_SEC'? pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION, ^ include/linux/kernel.h:812:22: note: in definition of macro '__typecheck' (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) ^ include/linux/kernel.h:836:24: note: in expansion of macro '__safe_cmp' __builtin_choose_expr(__safe_cmp(x, y), \ ^~~~~~~~~~ include/linux/kernel.h:904:27: note: in expansion of macro '__careful_cmp' #define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <) ^~~~~~~~~~~~~ mm/page_alloc.c:6379:29: note: in expansion of macro 'min_t' pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION, ^~~~~ include/linux/kernel.h:836:2: error: first argument to '__builtin_choose_expr' not a constant __builtin_choose_expr(__safe_cmp(x, y), \ ^ include/linux/kernel.h:904:27: note: in expansion of macro '__careful_cmp' #define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <) ^~~~~~~~~~~~~ mm/page_alloc.c:6379:29: note: in expansion of macro 'min_t' pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION, ^~~~~ scripts/Makefile.build:317: recipe for target 'mm/page_alloc.o' failed Let's make the DEFERRED_STRUCT_PAGE_INIT explicitly depend on SPARSEMEM as the systems that support DISCONTIGMEM do not seem to have that huge amounts of memory that would make DEFERRED_STRUCT_PAGE_INIT relevant. Link: http://lkml.kernel.org/r/1530279308-24988-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-02kconfig: add a Memory Management options" menuChristoph Hellwig
This moves all the options under a proper menu. Based on a patch from Randy Dunlap. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-08Merge tag 'libnvdimm-for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This adds a user for the new 'bytes-remaining' updates to memcpy_mcsafe() that you already received through Ingo via the x86-dax- for-linus pull. Not included here, but still targeting this cycle, is support for handling memory media errors (poison) consumed via userspace dax mappings. Summary: - DAX broke a fundamental assumption of truncate of file mapped pages. The truncate path assumed that it is safe to disconnect a pinned page from a file and let the filesystem reclaim the physical block. With DAX the page is equivalent to the filesystem block. Introduce dax_layout_busy_page() to enable filesystems to wait for pinned DAX pages to be released. Without this wait a filesystem could allocate blocks under active device-DMA to a new file. - DAX arranges for the block layer to be bypassed and uses dax_direct_access() + copy_to_iter() to satisfy read(2) calls. However, the memcpy_mcsafe() facility is available through the pmem block driver. In order to safely handle media errors, via the DAX block-layer bypass, introduce copy_to_iter_mcsafe(). - Fix cache management policy relative to the ACPI NFIT Platform Capabilities Structure to properly elide cache flushes when they are not necessary. The table indicates whether CPU caches are power-fail protected. Clarify that a deep flush is always performed on REQ_{FUA,PREFLUSH} requests" * tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) dax: Use dax_write_cache* helpers libnvdimm, pmem: Do not flush power-fail protected CPU caches libnvdimm, pmem: Unconditionally deep flush on *sync libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH acpi, nfit: Remove ecc_unit_size dax: dax_insert_mapping_entry always succeeds libnvdimm, e820: Register all pmem resources libnvdimm: Debug probe times linvdimm, pmem: Preserve read-only setting for pmem devices x86, nfit_test: Add unit test for memcpy_mcsafe() pmem: Switch to copy_to_iter_mcsafe() dax: Report bytes remaining in dax_iomap_actor() dax: Introduce a ->copy_to_iter dax operation uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation xfs, dax: introduce xfs_break_dax_layouts() xfs: prepare xfs_break_layouts() for another layout type xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL mm, fs, dax: handle layout changes to pinned dax mappings mm: fix __gup_device_huge vs unmap mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS ...
2018-06-08Merge branch 'for-4.18/dax' into libnvdimm-for-nextDan Williams
2018-06-07mm: introduce ARCH_HAS_PTE_SPECIALLaurent Dufour
Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-04Merge tag 'docs-4.18' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "There's been a fair amount of work in the docs tree this time around, including: - Extensive RST conversions and organizational work in the memory-management docs thanks to Mike Rapoport. - An update of Documentation/features from Andrea Parri and a script to keep it updated. - Various LICENSES updates from Thomas, along with a script to check SPDX tags. - Work to fix dangling references to documentation files; this involved a fair number of one-liner comment changes outside of Documentation/ ... and the usual list of documentation improvements, typo fixes, etc" * tag 'docs-4.18' of git://git.lwn.net/linux: (103 commits) Documentation: document hung_task_panic kernel parameter docs/admin-guide/mm: add high level concepts overview docs/vm: move ksm and transhuge from "user" to "internals" section. docs: Use the kerneldoc comments for memalloc_no*() doc: document scope NOFS, NOIO APIs docs: update kernel versions and dates in tables docs/vm: transhuge: split userspace bits to admin-guide/mm/transhuge docs/vm: transhuge: minor updates docs/vm: transhuge: change sections order Documentation: arm: clean up Marvell Berlin family info Documentation: gpio: driver: Fix a typo and some odd grammar docs: ranoops.rst: fix location of ramoops.txt scripts/documentation-file-ref-check: rewrite it in perl with auto-fix mode docs: uio-howto.rst: use a code block to solve a warning mm, THP, doc: Add document for thp_swpout/thp_swpout_fallback w1: w1_io.c: fix a kernel-doc warning Documentation/process/posting: wrap text at 80 cols docs: admin-guide: add cgroup-v2 documentation Revert "Documentation/features/vm: Remove arch support status file for 'pte_special'" Documentation: refcount-vs-atomic: Update reference to LKMM doc. ...
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...