summaryrefslogtreecommitdiff
path: root/mm/filemap.c
AgeCommit message (Collapse)Author
2021-12-10filemap: remove PageHWPoison check from next_uptodate_page()Matthew Wilcox (Oracle)
Pages are individually marked as suffering from hardware poisoning. Checking that the head page is not hardware poisoned doesn't make sense; we might be after a subpage. We check each page individually before we use it, so this was an optimisation gone wrong. It will cause us to fall back to the slow path when there was no need to do that Link: https://lkml.kernel.org/r/20211120174429.2596303-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Yang Shi <shy828301@gmail.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09vfs: keep inodes with page cache off the inode shrinker LRUJohannes Weiner
Historically (pre-2.5), the inode shrinker used to reclaim only empty inodes and skip over those that still contained page cache. This caused problems on highmem hosts: struct inode could put fill lowmem zones before the cache was getting reclaimed in the highmem zones. To address this, the inode shrinker started to strip page cache to facilitate reclaiming lowmem. However, this comes with its own set of problems: the shrinkers may drop actively used page cache just because the inodes are not currently open or dirty - think working with a large git tree. It further doesn't respect cgroup memory protection settings and can cause priority inversions between containers. Nowadays, the page cache also holds non-resident info for evicted cache pages in order to detect refaults. We've come to rely heavily on this data inside reclaim for protecting the cache workingset and driving swap behavior. We also use it to quantify and report workload health through psi. The latter in turn is used for fleet health monitoring, as well as driving automated memory sizing of workloads and containers, proactive reclaim and memory offloading schemes. The consequences of dropping page cache prematurely is that we're seeing subtle and not-so-subtle failures in all of the above-mentioned scenarios, with the workload generally entering unexpected thrashing states while losing the ability to reliably detect it. To fix this on non-highmem systems at least, going back to rotating inodes on the LRU isn't feasible. We've tried (commit a76cf1a474d7 ("mm: don't reclaim inodes with many attached pages")) and failed (commit 69056ee6a8a3 ("Revert "mm: don't reclaim inodes with many attached pages"")). The issue is mostly that shrinker pools attract pressure based on their size, and when objects get skipped the shrinkers remember this as deferred reclaim work. This accumulates excessive pressure on the remaining inodes, and we can quickly eat into heavily used ones, or dirty ones that require IO to reclaim, when there potentially is plenty of cold, clean cache around still. Instead, this patch keeps populated inodes off the inode LRU in the first place - just like an open file or dirty state would. An otherwise clean and unused inode then gets queued when the last cache entry disappears. This solves the problem without reintroducing the reclaim issues, and generally is a bit more scalable than having to wade through potentially hundreds of thousands of busy inodes. Locking is a bit tricky because the locks protecting the inode state (i_lock) and the inode LRU (lru_list.lock) don't nest inside the irq-safe page cache lock (i_pages.xa_lock). Page cache deletions are serialized through i_lock, taken before the i_pages lock, to make sure depopulated inodes are queued reliably. Additions may race with deletions, but we'll check again in the shrinker. If additions race with the shrinker itself, we're protected by the i_lock: if find_inode() or iput() win, the shrinker will bail on the elevated i_count or I_REFERENCED; if the shrinker wins and goes ahead with the inode, it will set I_FREEING and inhibit further igets(), which will cause the other side to create a new instance of the inode instead. Link: https://lkml.kernel.org/r/20210614211904.14420-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ...
2021-11-06mm/vmscan: throttle reclaim until some writeback completes if congestedMel Gorman
Patch series "Remove dependency on congestion_wait in mm/", v5. This series that removes all calls to congestion_wait in mm/ and deletes wait_iff_congested. It's not a clever implementation but congestion_wait has been broken for a long time [1]. Even if congestion throttling worked, it was never a great idea. While excessive dirty/writeback pages at the tail of the LRU is one possibility that reclaim may be slow, there is also the problem of too many pages being isolated and reclaim failing for other reasons (elevated references, too many pages isolated, excessive LRU contention etc). This series replaces the "congestion" throttling with 3 different types. - If there are too many dirty/writeback pages, sleep until a timeout or enough pages get cleaned - If too many pages are isolated, sleep until enough isolated pages are either reclaimed or put back on the LRU - If no progress is being made, direct reclaim tasks sleep until another task makes progress with acceptable efficiency. This was initially tested with a mix of workloads that used to trigger corner cases that no longer work. A new test case was created called "stutterp" (pagereclaim-stutterp-noreaders in mmtests) using a freshly created XFS filesystem. Note that it may be necessary to increase the timeout of ssh if executing remotely as ssh itself can get throttled and the connection may timeout. stutterp varies the number of "worker" processes from 4 up to NR_CPUS*4 to check the impact as the number of direct reclaimers increase. It has four types of worker. - One "anon latency" worker creates small mappings with mmap() and times how long it takes to fault the mapping reading it 4K at a time - X file writers which is fio randomly writing X files where the total size of the files add up to the allowed dirty_ratio. fio is allowed to run for a warmup period to allow some file-backed pages to accumulate. The duration of the warmup is based on the best-case linear write speed of the storage. - Y file readers which is fio randomly reading small files - Z anon memory hogs which continually map (100-dirty_ratio)% of memory - Total estimated WSS = (100+dirty_ration) percentage of memory X+Y+Z+1 == NR_WORKERS varying from 4 up to NR_CPUS*4 The intent is to maximise the total WSS with a mix of file and anon memory where some anonymous memory must be swapped and there is a high likelihood of dirty/writeback pages reaching the end of the LRU. The test can be configured to have no background readers to stress dirty/writeback pages. The results below are based on having zero readers. The short summary of the results is that the series works and stalls until some event occurs but the timeouts may need adjustment. The test results are not broken down by patch as the series should be treated as one block that replaces a broken throttling mechanism with a working one. Finally, three machines were tested but I'm reporting the worst set of results. The other two machines had much better latencies for example. First the results of the "anon latency" latency stutterp 5.15.0-rc1 5.15.0-rc1 vanilla mm-reclaimcongest-v5r4 Amean mmap-4 31.4003 ( 0.00%) 2661.0198 (-8374.52%) Amean mmap-7 38.1641 ( 0.00%) 149.2891 (-291.18%) Amean mmap-12 60.0981 ( 0.00%) 187.8105 (-212.51%) Amean mmap-21 161.2699 ( 0.00%) 213.9107 ( -32.64%) Amean mmap-30 174.5589 ( 0.00%) 377.7548 (-116.41%) Amean mmap-48 8106.8160 ( 0.00%) 1070.5616 ( 86.79%) Stddev mmap-4 41.3455 ( 0.00%) 27573.9676 (-66591.66%) Stddev mmap-7 53.5556 ( 0.00%) 4608.5860 (-8505.23%) Stddev mmap-12 171.3897 ( 0.00%) 5559.4542 (-3143.75%) Stddev mmap-21 1506.6752 ( 0.00%) 5746.2507 (-281.39%) Stddev mmap-30 557.5806 ( 0.00%) 7678.1624 (-1277.05%) Stddev mmap-48 61681.5718 ( 0.00%) 14507.2830 ( 76.48%) Max-90 mmap-4 31.4243 ( 0.00%) 83.1457 (-164.59%) Max-90 mmap-7 41.0410 ( 0.00%) 41.0720 ( -0.08%) Max-90 mmap-12 66.5255 ( 0.00%) 53.9073 ( 18.97%) Max-90 mmap-21 146.7479 ( 0.00%) 105.9540 ( 27.80%) Max-90 mmap-30 193.9513 ( 0.00%) 64.3067 ( 66.84%) Max-90 mmap-48 277.9137 ( 0.00%) 591.0594 (-112.68%) Max mmap-4 1913.8009 ( 0.00%) 299623.9695 (-15555.96%) Max mmap-7 2423.9665 ( 0.00%) 204453.1708 (-8334.65%) Max mmap-12 6845.6573 ( 0.00%) 221090.3366 (-3129.64%) Max mmap-21 56278.6508 ( 0.00%) 213877.3496 (-280.03%) Max mmap-30 19716.2990 ( 0.00%) 216287.6229 (-997.00%) Max mmap-48 477923.9400 ( 0.00%) 245414.8238 ( 48.65%) For most thread counts, the time to mmap() is unfortunately increased. In earlier versions of the series, this was lower but a large number of throttling events were reaching their timeout increasing the amount of inefficient scanning of the LRU. There is no prioritisation of reclaim tasks making progress based on each tasks rate of page allocation versus progress of reclaim. The variance is also impacted for high worker counts but in all cases, the differences in latency are not statistically significant due to very large maximum outliers. Max-90 shows that 90% of the stalls are comparable but the Max results show the massive outliers which are increased to to stalling. It is expected that this will be very machine dependant. Due to the test design, reclaim is difficult so allocations stall and there are variances depending on whether THPs can be allocated or not. The amount of memory will affect exactly how bad the corner cases are and how often they trigger. The warmup period calculation is not ideal as it's based on linear writes where as fio is randomly writing multiple files from multiple tasks so the start state of the test is variable. For example, these are the latencies on a single-socket machine that had more memory Amean mmap-4 42.2287 ( 0.00%) 49.6838 * -17.65%* Amean mmap-7 216.4326 ( 0.00%) 47.4451 * 78.08%* Amean mmap-12 2412.0588 ( 0.00%) 51.7497 ( 97.85%) Amean mmap-21 5546.2548 ( 0.00%) 51.8862 ( 99.06%) Amean mmap-30 1085.3121 ( 0.00%) 72.1004 ( 93.36%) The overall system CPU usage and elapsed time is as follows 5.15.0-rc3 5.15.0-rc3 vanilla mm-reclaimcongest-v5r4 Duration User 6989.03 983.42 Duration System 7308.12 799.68 Duration Elapsed 2277.67 2092.98 The patches reduce system CPU usage by 89% as the vanilla kernel is rarely stalling. The high-level /proc/vmstats show 5.15.0-rc1 5.15.0-rc1 vanilla mm-reclaimcongest-v5r2 Ops Direct pages scanned 1056608451.00 503594991.00 Ops Kswapd pages scanned 109795048.00 147289810.00 Ops Kswapd pages reclaimed 63269243.00 31036005.00 Ops Direct pages reclaimed 10803973.00 6328887.00 Ops Kswapd efficiency % 57.62 21.07 Ops Kswapd velocity 48204.98 57572.86 Ops Direct efficiency % 1.02 1.26 Ops Direct velocity 463898.83 196845.97 Kswapd scanned less pages but the detailed pattern is different. The vanilla kernel scans slowly over time where as the patches exhibits burst patterns of scan activity. Direct reclaim scanning is reduced by 52% due to stalling. The pattern for stealing pages is also slightly different. Both kernels exhibit spikes but the vanilla kernel when reclaiming shows pages being reclaimed over a period of time where as the patches tend to reclaim in spikes. The difference is that vanilla is not throttling and instead scanning constantly finding some pages over time where as the patched kernel throttles and reclaims in spikes. Ops Percentage direct scans 90.59 77.37 For direct reclaim, vanilla scanned 90.59% of pages where as with the patches, 77.37% were direct reclaim due to throttling Ops Page writes by reclaim 2613590.00 1687131.00 Page writes from reclaim context are reduced. Ops Page writes anon 2932752.00 1917048.00 And there is less swapping. Ops Page reclaim immediate 996248528.00 107664764.00 The number of pages encountered at the tail of the LRU tagged for immediate reclaim but still dirty/writeback is reduced by 89%. Ops Slabs scanned 164284.00 153608.00 Slab scan activity is similar. ftrace was used to gather stall activity Vanilla ------- 1 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=16000 2 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=12000 8 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=8000 29 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=4000 82394 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=0 The fast majority of wait_iff_congested calls do not stall at all. What is likely happening is that cond_resched() reschedules the task for a short period when the BDI is not registering congestion (which it never will in this test setup). 1 writeback_congestion_wait: usec_timeout=100000 usec_delayed=120000 2 writeback_congestion_wait: usec_timeout=100000 usec_delayed=132000 4 writeback_congestion_wait: usec_timeout=100000 usec_delayed=112000 380 writeback_congestion_wait: usec_timeout=100000 usec_delayed=108000 778 writeback_congestion_wait: usec_timeout=100000 usec_delayed=104000 congestion_wait if called always exceeds the timeout as there is no trigger to wake it up. Bottom line: Vanilla will throttle but it's not effective. Patch series ------------ Kswapd throttle activity was always due to scanning pages tagged for immediate reclaim at the tail of the LRU 1 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK 4 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK 5 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK 6 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK 11 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK 11 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK 94 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK 112 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK The majority of events did not stall or stalled for a short period. Roughly 16% of stalls reached the timeout before expiry. For direct reclaim, the number of times stalled for each reason were 6624 reason=VMSCAN_THROTTLE_ISOLATED 93246 reason=VMSCAN_THROTTLE_NOPROGRESS 96934 reason=VMSCAN_THROTTLE_WRITEBACK The most common reason to stall was due to excessive pages tagged for immediate reclaim at the tail of the LRU followed by a failure to make forward. A relatively small number were due to too many pages isolated from the LRU by parallel threads For VMSCAN_THROTTLE_ISOLATED, the breakdown of delays was 9 usec_timeout=20000 usect_delayed=4000 reason=VMSCAN_THROTTLE_ISOLATED 12 usec_timeout=20000 usect_delayed=16000 reason=VMSCAN_THROTTLE_ISOLATED 83 usec_timeout=20000 usect_delayed=20000 reason=VMSCAN_THROTTLE_ISOLATED 6520 usec_timeout=20000 usect_delayed=0 reason=VMSCAN_THROTTLE_ISOLATED Most did not stall at all. A small number reached the timeout. For VMSCAN_THROTTLE_NOPROGRESS, the breakdown of stalls were all over the map 1 usec_timeout=500000 usect_delayed=324000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usec_timeout=500000 usect_delayed=332000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usec_timeout=500000 usect_delayed=348000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usec_timeout=500000 usect_delayed=360000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=228000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=260000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=340000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=364000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=372000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=428000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=460000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=464000 reason=VMSCAN_THROTTLE_NOPROGRESS 3 usec_timeout=500000 usect_delayed=244000 reason=VMSCAN_THROTTLE_NOPROGRESS 3 usec_timeout=500000 usect_delayed=252000 reason=VMSCAN_THROTTLE_NOPROGRESS 3 usec_timeout=500000 usect_delayed=272000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=188000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=268000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=328000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=380000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=392000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=432000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=204000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=220000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=412000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=436000 reason=VMSCAN_THROTTLE_NOPROGRESS 6 usec_timeout=500000 usect_delayed=488000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=212000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=300000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=316000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=472000 reason=VMSCAN_THROTTLE_NOPROGRESS 8 usec_timeout=500000 usect_delayed=248000 reason=VMSCAN_THROTTLE_NOPROGRESS 8 usec_timeout=500000 usect_delayed=356000 reason=VMSCAN_THROTTLE_NOPROGRESS 8 usec_timeout=500000 usect_delayed=456000 reason=VMSCAN_THROTTLE_NOPROGRESS 9 usec_timeout=500000 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS 9 usec_timeout=500000 usect_delayed=376000 reason=VMSCAN_THROTTLE_NOPROGRESS 9 usec_timeout=500000 usect_delayed=484000 reason=VMSCAN_THROTTLE_NOPROGRESS 10 usec_timeout=500000 usect_delayed=172000 reason=VMSCAN_THROTTLE_NOPROGRESS 10 usec_timeout=500000 usect_delayed=420000 reason=VMSCAN_THROTTLE_NOPROGRESS 10 usec_timeout=500000 usect_delayed=452000 reason=VMSCAN_THROTTLE_NOPROGRESS 11 usec_timeout=500000 usect_delayed=256000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=144000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=152000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=264000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=384000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=424000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=492000 reason=VMSCAN_THROTTLE_NOPROGRESS 13 usec_timeout=500000 usect_delayed=184000 reason=VMSCAN_THROTTLE_NOPROGRESS 13 usec_timeout=500000 usect_delayed=444000 reason=VMSCAN_THROTTLE_NOPROGRESS 14 usec_timeout=500000 usect_delayed=308000 reason=VMSCAN_THROTTLE_NOPROGRESS 14 usec_timeout=500000 usect_delayed=440000 reason=VMSCAN_THROTTLE_NOPROGRESS 14 usec_timeout=500000 usect_delayed=476000 reason=VMSCAN_THROTTLE_NOPROGRESS 16 usec_timeout=500000 usect_delayed=140000 reason=VMSCAN_THROTTLE_NOPROGRESS 17 usec_timeout=500000 usect_delayed=232000 reason=VMSCAN_THROTTLE_NOPROGRESS 17 usec_timeout=500000 usect_delayed=240000 reason=VMSCAN_THROTTLE_NOPROGRESS 17 usec_timeout=500000 usect_delayed=280000 reason=VMSCAN_THROTTLE_NOPROGRESS 18 usec_timeout=500000 usect_delayed=404000 reason=VMSCAN_THROTTLE_NOPROGRESS 20 usec_timeout=500000 usect_delayed=148000 reason=VMSCAN_THROTTLE_NOPROGRESS 20 usec_timeout=500000 usect_delayed=216000 reason=VMSCAN_THROTTLE_NOPROGRESS 20 usec_timeout=500000 usect_delayed=468000 reason=VMSCAN_THROTTLE_NOPROGRESS 21 usec_timeout=500000 usect_delayed=448000 reason=VMSCAN_THROTTLE_NOPROGRESS 23 usec_timeout=500000 usect_delayed=168000 reason=VMSCAN_THROTTLE_NOPROGRESS 23 usec_timeout=500000 usect_delayed=296000 reason=VMSCAN_THROTTLE_NOPROGRESS 25 usec_timeout=500000 usect_delayed=132000 reason=VMSCAN_THROTTLE_NOPROGRESS 25 usec_timeout=500000 usect_delayed=352000 reason=VMSCAN_THROTTLE_NOPROGRESS 26 usec_timeout=500000 usect_delayed=180000 reason=VMSCAN_THROTTLE_NOPROGRESS 27 usec_timeout=500000 usect_delayed=284000 reason=VMSCAN_THROTTLE_NOPROGRESS 28 usec_timeout=500000 usect_delayed=164000 reason=VMSCAN_THROTTLE_NOPROGRESS 29 usec_timeout=500000 usect_delayed=136000 reason=VMSCAN_THROTTLE_NOPROGRESS 30 usec_timeout=500000 usect_delayed=200000 reason=VMSCAN_THROTTLE_NOPROGRESS 30 usec_timeout=500000 usect_delayed=400000 reason=VMSCAN_THROTTLE_NOPROGRESS 31 usec_timeout=500000 usect_delayed=196000 reason=VMSCAN_THROTTLE_NOPROGRESS 32 usec_timeout=500000 usect_delayed=156000 reason=VMSCAN_THROTTLE_NOPROGRESS 33 usec_timeout=500000 usect_delayed=224000 reason=VMSCAN_THROTTLE_NOPROGRESS 35 usec_timeout=500000 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS 35 usec_timeout=500000 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS 36 usec_timeout=500000 usect_delayed=368000 reason=VMSCAN_THROTTLE_NOPROGRESS 36 usec_timeout=500000 usect_delayed=496000 reason=VMSCAN_THROTTLE_NOPROGRESS 37 usec_timeout=500000 usect_delayed=312000 reason=VMSCAN_THROTTLE_NOPROGRESS 38 usec_timeout=500000 usect_delayed=304000 reason=VMSCAN_THROTTLE_NOPROGRESS 40 usec_timeout=500000 usect_delayed=288000 reason=VMSCAN_THROTTLE_NOPROGRESS 43 usec_timeout=500000 usect_delayed=408000 reason=VMSCAN_THROTTLE_NOPROGRESS 55 usec_timeout=500000 usect_delayed=416000 reason=VMSCAN_THROTTLE_NOPROGRESS 56 usec_timeout=500000 usect_delayed=76000 reason=VMSCAN_THROTTLE_NOPROGRESS 58 usec_timeout=500000 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS 59 usec_timeout=500000 usect_delayed=208000 reason=VMSCAN_THROTTLE_NOPROGRESS 61 usec_timeout=500000 usect_delayed=68000 reason=VMSCAN_THROTTLE_NOPROGRESS 71 usec_timeout=500000 usect_delayed=192000 reason=VMSCAN_THROTTLE_NOPROGRESS 71 usec_timeout=500000 usect_delayed=480000 reason=VMSCAN_THROTTLE_NOPROGRESS 79 usec_timeout=500000 usect_delayed=60000 reason=VMSCAN_THROTTLE_NOPROGRESS 82 usec_timeout=500000 usect_delayed=320000 reason=VMSCAN_THROTTLE_NOPROGRESS 82 usec_timeout=500000 usect_delayed=92000 reason=VMSCAN_THROTTLE_NOPROGRESS 85 usec_timeout=500000 usect_delayed=64000 reason=VMSCAN_THROTTLE_NOPROGRESS 85 usec_timeout=500000 usect_delayed=80000 reason=VMSCAN_THROTTLE_NOPROGRESS 88 usec_timeout=500000 usect_delayed=84000 reason=VMSCAN_THROTTLE_NOPROGRESS 90 usec_timeout=500000 usect_delayed=160000 reason=VMSCAN_THROTTLE_NOPROGRESS 90 usec_timeout=500000 usect_delayed=292000 reason=VMSCAN_THROTTLE_NOPROGRESS 94 usec_timeout=500000 usect_delayed=56000 reason=VMSCAN_THROTTLE_NOPROGRESS 118 usec_timeout=500000 usect_delayed=88000 reason=VMSCAN_THROTTLE_NOPROGRESS 119 usec_timeout=500000 usect_delayed=72000 reason=VMSCAN_THROTTLE_NOPROGRESS 126 usec_timeout=500000 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS 146 usec_timeout=500000 usect_delayed=52000 reason=VMSCAN_THROTTLE_NOPROGRESS 148 usec_timeout=500000 usect_delayed=36000 reason=VMSCAN_THROTTLE_NOPROGRESS 148 usec_timeout=500000 usect_delayed=48000 reason=VMSCAN_THROTTLE_NOPROGRESS 159 usec_timeout=500000 usect_delayed=28000 reason=VMSCAN_THROTTLE_NOPROGRESS 178 usec_timeout=500000 usect_delayed=44000 reason=VMSCAN_THROTTLE_NOPROGRESS 183 usec_timeout=500000 usect_delayed=40000 reason=VMSCAN_THROTTLE_NOPROGRESS 237 usec_timeout=500000 usect_delayed=100000 reason=VMSCAN_THROTTLE_NOPROGRESS 266 usec_timeout=500000 usect_delayed=32000 reason=VMSCAN_THROTTLE_NOPROGRESS 313 usec_timeout=500000 usect_delayed=24000 reason=VMSCAN_THROTTLE_NOPROGRESS 347 usec_timeout=500000 usect_delayed=96000 reason=VMSCAN_THROTTLE_NOPROGRESS 470 usec_timeout=500000 usect_delayed=20000 reason=VMSCAN_THROTTLE_NOPROGRESS 559 usec_timeout=500000 usect_delayed=16000 reason=VMSCAN_THROTTLE_NOPROGRESS 964 usec_timeout=500000 usect_delayed=12000 reason=VMSCAN_THROTTLE_NOPROGRESS 2001 usec_timeout=500000 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS 2447 usec_timeout=500000 usect_delayed=8000 reason=VMSCAN_THROTTLE_NOPROGRESS 7888 usec_timeout=500000 usect_delayed=4000 reason=VMSCAN_THROTTLE_NOPROGRESS 22727 usec_timeout=500000 usect_delayed=0 reason=VMSCAN_THROTTLE_NOPROGRESS 51305 usec_timeout=500000 usect_delayed=500000 reason=VMSCAN_THROTTLE_NOPROGRESS The full timeout is often hit but a large number also do not stall at all. The remainder slept a little allowing other reclaim tasks to make progress. While this timeout could be further increased, it could also negatively impact worst-case behaviour when there is no prioritisation of what task should make progress. For VMSCAN_THROTTLE_WRITEBACK, the breakdown was 1 usec_timeout=100000 usect_delayed=44000 reason=VMSCAN_THROTTLE_WRITEBACK 2 usec_timeout=100000 usect_delayed=76000 reason=VMSCAN_THROTTLE_WRITEBACK 3 usec_timeout=100000 usect_delayed=80000 reason=VMSCAN_THROTTLE_WRITEBACK 5 usec_timeout=100000 usect_delayed=48000 reason=VMSCAN_THROTTLE_WRITEBACK 5 usec_timeout=100000 usect_delayed=84000 reason=VMSCAN_THROTTLE_WRITEBACK 6 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK 7 usec_timeout=100000 usect_delayed=88000 reason=VMSCAN_THROTTLE_WRITEBACK 11 usec_timeout=100000 usect_delayed=56000 reason=VMSCAN_THROTTLE_WRITEBACK 12 usec_timeout=100000 usect_delayed=64000 reason=VMSCAN_THROTTLE_WRITEBACK 16 usec_timeout=100000 usect_delayed=92000 reason=VMSCAN_THROTTLE_WRITEBACK 24 usec_timeout=100000 usect_delayed=68000 reason=VMSCAN_THROTTLE_WRITEBACK 28 usec_timeout=100000 usect_delayed=32000 reason=VMSCAN_THROTTLE_WRITEBACK 30 usec_timeout=100000 usect_delayed=60000 reason=VMSCAN_THROTTLE_WRITEBACK 30 usec_timeout=100000 usect_delayed=96000 reason=VMSCAN_THROTTLE_WRITEBACK 32 usec_timeout=100000 usect_delayed=52000 reason=VMSCAN_THROTTLE_WRITEBACK 42 usec_timeout=100000 usect_delayed=40000 reason=VMSCAN_THROTTLE_WRITEBACK 77 usec_timeout=100000 usect_delayed=28000 reason=VMSCAN_THROTTLE_WRITEBACK 99 usec_timeout=100000 usect_delayed=36000 reason=VMSCAN_THROTTLE_WRITEBACK 137 usec_timeout=100000 usect_delayed=24000 reason=VMSCAN_THROTTLE_WRITEBACK 190 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK 339 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK 518 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK 852 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK 3359 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK 7147 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK 83962 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK The majority hit the timeout in direct reclaim context although a sizable number did not stall at all. This is very different to kswapd where only a tiny percentage of stalls due to writeback reached the timeout. Bottom line, the throttling appears to work and the wakeup events may limit worst case stalls. There might be some grounds for adjusting timeouts but it's likely futile as the worst-case scenarios depend on the workload, memory size and the speed of the storage. A better approach to improve the series further would be to prioritise tasks based on their rate of allocation with the caveat that it may be very expensive to track. This patch (of 5): Page reclaim throttles on wait_iff_congested under the following conditions: - kswapd is encountering pages under writeback and marked for immediate reclaim implying that pages are cycling through the LRU faster than pages can be cleaned. - Direct reclaim will stall if all dirty pages are backed by congested inodes. wait_iff_congested is almost completely broken with few exceptions. This patch adds a new node-based workqueue and tracks the number of throttled tasks and pages written back since throttling started. If enough pages belonging to the node are written back then the throttled tasks will wake early. If not, the throttled tasks sleeps until the timeout expires. [neilb@suse.de: Uninterruptible sleep and simpler wakeups] [hdanton@sina.com: Avoid race when reclaim starts] [vbabka@suse.cz: vmstat irq-safe api, clarifications] Link: https://lore.kernel.org/linux-mm/45d8b7a6-8548-65f5-cccf-9f451d4ae3d4@kernel.dk/ [1] Link: https://lkml.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net Link: https://lkml.kernel.org/r/20211022144651.19914-2-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: NeilBrown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Darrick J . Wong" <djwong@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@surriel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm: filemap: coding style cleanup for filemap_map_pmd()Yang Shi
Patch series "Solve silent data loss caused by poisoned page cache (shmem/tmpfs)", v5. When discussing the patch that splits page cache THP in order to offline the poisoned page, Noaya mentioned there is a bigger problem [1] that prevents this from working since the page cache page will be truncated if uncorrectable errors happen. By looking this deeper it turns out this approach (truncating poisoned page) may incur silent data loss for all non-readonly filesystems if the page is dirty. It may be worse for in-memory filesystem, e.g. shmem/tmpfs since the data blocks are actually gone. To solve this problem we could keep the poisoned dirty page in page cache then notify the users on any later access, e.g. page fault, read/write, etc. The clean page could be truncated as is since they can be reread from disk later on. The consequence is the filesystems may find poisoned page and manipulate it as healthy page since all the filesystems actually don't check if the page is poisoned or not in all the relevant paths except page fault. In general, we need make the filesystems be aware of poisoned page before we could keep the poisoned page in page cache in order to solve the data loss problem. To make filesystems be aware of poisoned page we should consider: - The page should be not written back: clearing dirty flag could prevent from writeback. - The page should not be dropped (it shows as a clean page) by drop caches or other callers: the refcount pin from hwpoison could prevent from invalidating (called by cache drop, inode cache shrinking, etc), but it doesn't avoid invalidation in DIO path. - The page should be able to get truncated/hole punched/unlinked: it works as it is. - Notify users when the page is accessed, e.g. read/write, page fault and other paths (compression, encryption, etc). The scope of the last one is huge since almost all filesystems need do it once a page is returned from page cache lookup. There are a couple of options to do it: 1. Check hwpoison flag for every path, the most straightforward way. 2. Return NULL for poisoned page from page cache lookup, the most callsites check if NULL is returned, this should have least work I think. But the error handling in filesystems just return -ENOMEM, the error code will incur confusion to the users obviously. 3. To improve #2, we could return error pointer, e.g. ERR_PTR(-EIO), but this will involve significant amount of code change as well since all the paths need check if the pointer is ERR or not just like option #1. I did prototypes for both #1 and #3, but it seems #3 may require more changes than #1. For #3 ERR_PTR will be returned so all the callers need to check the return value otherwise invalid pointer may be dereferenced, but not all callers really care about the content of the page, for example, partial truncate which just sets the truncated range in one page to 0. So for such paths it needs additional modification if ERR_PTR is returned. And if the callers have their own way to handle the problematic pages we need to add a new FGP flag to tell FGP functions to return the pointer to the page. It may happen very rarely, but once it happens the consequence (data corruption) could be very bad and it is very hard to debug. It seems this problem had been slightly discussed before, but seems no action was taken at that time. [2] As the aforementioned investigation, it needs huge amount of work to solve the potential data loss for all filesystems. But it is much easier for in-memory filesystems and such filesystems actually suffer more than others since even the data blocks are gone due to truncating. So this patchset starts from shmem/tmpfs by taking option #1. TODO: * The unpoison has been broken since commit 0ed950d1f281 ("mm,hwpoison: make get_hwpoison_page() call get_any_page()"), and this patch series make refcount check for unpoisoning shmem page fail. * Expand to other filesystems. But I haven't heard feedback from filesystem developers yet. Patch breakdown: Patch #1: cleanup, depended by patch #2 Patch #2: fix THP with hwpoisoned subpage(s) PMD map bug Patch #3: coding style cleanup Patch #4: refactor and preparation. Patch #5: keep the poisoned page in page cache and handle such case for all the paths. Patch #6: the previous patches unblock page cache THP split, so this patch add page cache THP split support. This patch (of 4): A minor cleanup to the indent. Link: https://lkml.kernel.org/r/20211020210755.23964-1-shy828301@gmail.com Link: https://lkml.kernel.org/r/20211020210755.23964-4-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm: introduce pmd_install() helperQi Zheng
Patch series "Do some code cleanups related to mm", v3. This patch (of 2): Currently we have three times the same few lines repeated in the code. Deduplicate them by newly introduced pmd_install() helper. Link: https://lkml.kernel.org/r/20210901102722.47686-1-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20210901102722.47686-2-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Mika Penttila <mika.penttila@nextfour.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm: move more expensive part of XA setup out of mapping checkJens Axboe
The fast path here is not needing any writeback, yet we spend time setting up the xarray lookup data upfront. Move the part that actually needs to iterate the address space mapping into a separate helper, saving ~30% of the time here. Link: https://lkml.kernel.org/r/49f67983-b802-8929-edab-d807f745c9ca@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm/filemap.c: remove bogus VM_BUG_ONMatthew Wilcox (Oracle)
It is not safe to check page->index without holding the page lock. It can be changed if the page is moved between the swap cache and the page cache for a shmem file, for example. There is a VM_BUG_ON below which checks page->index is correct after taking the page lock. Link: https://lkml.kernel.org/r/20210818144932.940640-1-willy@infradead.org Fixes: 5c211ba29deb ("mm: add and use find_lock_entries") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: <syzbot+c87be4f669d920c76330@syzkaller.appspotmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm: don't read i_size of inode unless we need itJens Axboe
We always go through i_size_read(), and we rarely end up needing it. Push the read to down where we need to check it, which avoids it for most cases. It looks like we can even remove this check entirely, which might be worth pursuing. But at least this takes it out of the hot path. Link: https://lkml.kernel.org/r/6b67981f-57d4-c80e-bc07-6020aa601381@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm: stop filemap_read() from grabbing a superfluous pageDavid Howells
Under some circumstances, filemap_read() will allocate sufficient pages to read to the end of the file, call readahead/readpages on them and copy the data over - and then it will allocate another page at the EOF and call readpage on that and then ignore it. This is unnecessary and a waste of time and resources. filemap_read() *does* check for this, but only after it has already done the allocation and I/O. Fix this by checking before calling filemap_get_pages() also. Link: https://lkml.kernel.org/r/163472463105.3126792.7056099385135786492.stgit@warthog.procyon.org.uk Link: https://lore.kernel.org/r/160588481358.3465195.16552616179674485179.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163456863216.2614702.6384850026368833133.stgit@warthog.procyon.org.uk/ Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-02Merge tag 'gfs2-v5.15-rc5-mmap-fault' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher: "Functions gfs2_file_read_iter and gfs2_file_write_iter are both accessing the user buffer to write to or read from while holding the inode glock. In the most basic deadlock scenario, that buffer will not be resident and it will be mapped to the same file. Accessing the buffer will trigger a page fault, and gfs2 will deadlock trying to take the same inode glock again while trying to handle that fault. Fix that and similar, more complex scenarios by disabling page faults while accessing user buffers. To make this work, introduce a small amount of new infrastructure and fix some bugs that didn't trigger so far, with page faults enabled" * tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix mmap + page fault deadlocks for direct I/O iov_iter: Introduce nofault flag to disable page faults gup: Introduce FOLL_NOFAULT flag to disable page faults iomap: Add done_before argument to iomap_dio_rw iomap: Support partial direct I/O on user copy failures iomap: Fix iomap_dio_rw return value for user copies gfs2: Fix mmap + page fault deadlocks for buffered I/O gfs2: Eliminate ip->i_gh gfs2: Move the inode glock locking to gfs2_file_buffered_write gfs2: Introduce flag for glock holder auto-demotion gfs2: Clean up function may_grant gfs2: Add wrapper for iomap_file_buffered_write iov_iter: Introduce fault_in_iov_iter_writeable iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable} powerpc/kvm: Fix kvm_use_magic_page iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
2021-11-01Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - mq-deadline accounting improvements (Bart) - blk-wbt timer fix (Andrea) - Untangle the block layer includes (Christoph) - Rework the poll support to be bio based, which will enable adding support for polling for bio based drivers (Christoph) - Block layer core support for multi-actuator drives (Damien) - blk-crypto improvements (Eric) - Batched tag allocation support (me) - Request completion batching support (me) - Plugging improvements (me) - Shared tag set improvements (John) - Concurrent queue quiesce support (Ming) - Cache bdev in ->private_data for block devices (Pavel) - bdev dio improvements (Pavel) - Block device invalidation and block size improvements (Xie) - Various cleanups, fixes, and improvements (Christoph, Jackie, Masahira, Tejun, Yu, Pavel, Zheng, me) * tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits) blk-mq-debugfs: Show active requests per queue for shared tags block: improve readability of blk_mq_end_request_batch() virtio-blk: Use blk_validate_block_size() to validate block size loop: Use blk_validate_block_size() to validate block size nbd: Use blk_validate_block_size() to validate block size block: Add a helper to validate the block size block: re-flow blk_mq_rq_ctx_init() block: prefetch request to be initialized block: pass in blk_mq_tags to blk_mq_rq_ctx_init() block: add rq_flags to struct blk_mq_alloc_data block: add async version of bio_set_polled block: kill DIO_MULTI_BIO block: kill unused polling bits in __blkdev_direct_IO() block: avoid extra iter advance with async iocb block: Add independent access ranges support blk-mq: don't issue request directly in case that current is to be blocked sbitmap: silence data race warning blk-cgroup: synchronize blkg creation against policy deactivation block: refactor bio_iov_bvec_set() block: add single bio async direct IO helper ...
2021-10-18iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readableAndreas Gruenbacher
Turn iov_iter_fault_in_readable into a function that returns the number of bytes not faulted in, similar to copy_to_user, instead of returning a non-zero value when any of the requested pages couldn't be faulted in. This supports the existing users that require all pages to be faulted in as well as new users that are happy if any pages can be faulted in. Rename iov_iter_fault_in_readable to fault_in_iov_iter_readable to make sure this change doesn't silently break things. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-10-18gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}Andreas Gruenbacher
Turn fault_in_pages_{readable,writeable} into versions that return the number of bytes not faulted in, similar to copy_to_user, instead of returning a non-zero value when any of the requested pages couldn't be faulted in. This supports the existing users that require all pages to be faulted in as well as new users that are happy if any pages can be faulted in. Rename the functions to fault_in_{readable,writeable} to make sure this change doesn't silently break things. Neither of these functions is entirely trivial and it doesn't seem useful to inline them, so move them to mm/gup.c. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-10-18mm: remove spurious blkdev.h includesChristoph Hellwig
Various files have acquired spurious includes of <linux/blkdev.h> over time. Remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18mm/filemap: Add FGP_STABLEMatthew Wilcox (Oracle)
Allow filemap_get_folio() to wait for writeback to complete (if the filesystem wants that behaviour). This is the folio equivalent of grab_cache_page_write_begin(), which is moved into the folio-compat file as a reminder to migrate all the code using it. This paves the way for getting rid of AOP_FLAG_NOFS once grab_cache_page_write_begin() is removed. Kernel grows by 11 bytes. filemap_get_folio() grows by 33 bytes but grab_cache_page_write_begin() shrinks by 22 bytes to make up for it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18mm/filemap: Add filemap_get_folioMatthew Wilcox (Oracle)
filemap_get_folio() is a replacement for find_get_page(). Turn pagecache_get_page() into a wrapper around __filemap_get_folio(). Remove find_lock_head() as this use case is now covered by filemap_get_folio(). Reduces overall kernel size by 209 bytes. __filemap_get_folio() is 316 bytes shorter than pagecache_get_page() was, but the new pagecache_get_page() wrapper is 99 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18mm/filemap: Convert mapping_get_entry to return a folioMatthew Wilcox (Oracle)
The pagecache only contains folios, so indicate that this is definitely not a tail page. Shrinks mapping_get_entry() by 56 bytes, but grows pagecache_get_page() by 21 bytes as gcc makes slightly different hot/cold code decisions. A net reduction of 35 bytes of text. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18mm/filemap: Add filemap_add_folio()Matthew Wilcox (Oracle)
Convert __add_to_page_cache_locked() into __filemap_add_folio(). Add an assertion to it that (for !hugetlbfs), the folio is naturally aligned within the file. Move the prototype from mm.h to pagemap.h. Convert add_to_page_cache_lru() into filemap_add_folio(). Add a compatibility wrapper for unconverted callers. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18mm/filemap: Add filemap_alloc_folioMatthew Wilcox (Oracle)
Reimplement __page_cache_alloc as a wrapper around filemap_alloc_folio to allow filesystems to be converted at our leisure. Increases kernel text size by 133 bytes, mostly in cachefiles_read_backing_file(). pagecache_get_page() shrinks by 32 bytes, though. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18mm/workingset: Convert workingset_refault() to take a folioMatthew Wilcox (Oracle)
This nets us 178 bytes of savings from removing calls to compound_head. The three callers all grow a little, but each of them will be converted to use folios soon, so that's fine. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18mm/writeback: Add __folio_end_writeback()Matthew Wilcox (Oracle)
test_clear_page_writeback() is actually an mm-internal function, although it's named as if it's a pagecache function. Move it to mm/internal.h, rename it to __folio_end_writeback() and change the return type to bool. The conversion from page to folio is mostly about accounting the number of pages being written back, although it does eliminate a couple of calls to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm/memcg: Convert mem_cgroup_migrate() to take foliosMatthew Wilcox (Oracle)
Convert all callers of mem_cgroup_migrate() to call page_folio() first. They all look like they're using head pages already, but this proves it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm/memcg: Convert mem_cgroup_uncharge() to take a folioMatthew Wilcox (Oracle)
Convert all the callers to call page_folio(). Most of them were already using a head page, but a few of them I can't prove were, so this may actually fix a bug. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm/memcg: Convert mem_cgroup_charge() to take a folioMatthew Wilcox (Oracle)
Convert all callers of mem_cgroup_charge() to call page_folio() on the page they're currently passing in. Many of them will be converted to use folios themselves soon. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm/filemap: Add folio private_2 functionsMatthew Wilcox (Oracle)
end_page_private_2() becomes folio_end_private_2(), wait_on_page_private_2() becomes folio_wait_private_2() and wait_on_page_private_2_killable() becomes folio_wait_private_2_killable(). Adjust the fscache equivalents to call page_folio() before calling these functions to avoid adding wrappers. Ends up costing 1 byte of text in ceph & netfs, but the core shrinks by three calls to page_folio(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
2021-09-27mm/filemap: Convert page wait queues to be foliosMatthew Wilcox (Oracle)
Reinforce that page flags are actually in the head page by changing the type from page to folio. Increases the size of cachefiles by two bytes, but the kernel core is unchanged in size. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com>
2021-09-27mm/filemap: Add folio_wake_bit()Matthew Wilcox (Oracle)
Convert wake_up_page_bit() to folio_wake_bit(). All callers have a folio, so use it directly. Saves 66 bytes of text in end_page_private_2(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
2021-09-27mm/filemap: Add folio_wait_bit()Matthew Wilcox (Oracle)
Rename wait_on_page_bit() to folio_wait_bit(). We must always wait on the folio, otherwise we won't be woken up due to the tail page hashing to a different bucket from the head page. This commit shrinks the kernel by 770 bytes, mostly due to moving the page waitqueue lookup into folio_wait_bit_common(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
2021-09-27mm/filemap: Add folio_end_writeback()Matthew Wilcox (Oracle)
Add an end_page_writeback() wrapper function for users that are not yet converted to folios. folio_end_writeback() is less than half the size of end_page_writeback() at just 105 bytes compared to 228 bytes, due to removing all the compound_head() calls. The 30 byte wrapper function makes this a net saving of 93 bytes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
2021-09-27mm/swap: Add folio_rotate_reclaimable()Matthew Wilcox (Oracle)
Convert rotate_reclaimable_page() to folio_rotate_reclaimable(). This eliminates all five of the calls to compound_head() in this function, saving 75 bytes at the cost of adding 15 bytes to its one caller, end_page_writeback(). We also save 36 bytes from pagevec_move_tail_fn() due to using folios there. Net 96 bytes savings. Also move its declaration to mm/internal.h as it's only used by filemap.c. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com>
2021-09-27mm/filemap: Add __folio_lock_or_retry()Matthew Wilcox (Oracle)
Convert __lock_page_or_retry() to __folio_lock_or_retry(). This actually saves 4 bytes in the only caller of lock_page_or_retry() (due to better register allocation) and saves the 14 byte cost of calling page_folio() in __folio_lock_or_retry() for a total saving of 18 bytes. Also use a bool for the return type. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm/filemap: Add folio_wait_locked()Matthew Wilcox (Oracle)
Also add folio_wait_locked_killable(). Turn wait_on_page_locked() and wait_on_page_locked_killable() into wrappers. This eliminates a call to compound_head() from each call-site, reducing text size by 193 bytes for me. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
2021-09-27mm/filemap: Add __folio_lock_async()Matthew Wilcox (Oracle)
There aren't any actual callers of lock_page_async(), so remove it. Convert filemap_update_page() to call __folio_lock_async(). __folio_lock_async() is 21 bytes smaller than __lock_page_async(), but the real savings come from using a folio in filemap_update_page(), shrinking it from 515 bytes to 404 bytes, saving 110 bytes. The text shrinks by 132 bytes in total. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
2021-09-27mm/filemap: Add folio_lock_killable()Matthew Wilcox (Oracle)
This is like lock_page_killable() but for use by callers who know they have a folio. Convert __lock_page_killable() to be __folio_lock_killable(). This saves one call to compound_head() per contended call to lock_page_killable(). __folio_lock_killable() is 19 bytes smaller than __lock_page_killable() was. filemap_fault() shrinks by 74 bytes and __lock_page_or_retry() shrinks by 71 bytes. That's a total of 164 bytes of text saved. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com>
2021-09-27mm/filemap: Add folio_lock()Matthew Wilcox (Oracle)
This is like lock_page() but for use by callers who know they have a folio. Convert __lock_page() to be __folio_lock(). This saves one call to compound_head() per contended call to lock_page(). Saves 455 bytes of text; mostly from improved register allocation and inlining decisions. __folio_lock is 59 bytes while __lock_page was 79. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
2021-09-27mm/filemap: Add folio_unlock()Matthew Wilcox (Oracle)
Convert unlock_page() to call folio_unlock(). By using a folio we avoid a call to compound_head(). This shortens the function from 39 bytes to 25 and removes 4 instructions on x86-64. Because we still have unlock_page(), it's a net increase of 16 bytes of text for the kernel as a whole, but any path that uses folio_unlock() will execute 4 fewer instructions. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm: Add folio_try_get_rcu()Matthew Wilcox (Oracle)
This is the equivalent of page_cache_get_speculative(). Also add folio_ref_try_add_rcu (the equivalent of page_cache_add_speculative) and folio_get_unless_zero() (the equivalent of get_page_unless_zero()). The new kernel-doc attempts to explain from the user's point of view when to use folio_try_get_rcu() and when to use folio_get_unless_zero(), because there seems to be some confusion currently between the users of page_cache_get_speculative() and get_page_unless_zero(). Reimplement page_cache_add_speculative() and page_cache_get_speculative() as wrappers around the folio equivalents, but leave get_page_unless_zero() alone for now. This commit reduces text size by 3 bytes due to slightly different register allocation & instruction selections. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03mm: remove irqsave/restore locking from contexts with irqs enabledJohannes Weiner
The page cache deletion paths all have interrupts enabled, so no need to use irqsafe/irqrestore locking variants. They used to have irqs disabled by the memcg lock added in commit c4843a7593a9 ("memcg: add per cgroup dirty page accounting"), but that has since been replaced by memcg taking the page lock instead, commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge AP"). Link: https://lkml.kernel.org/r/20210614211904.14420-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-31Merge tag 'for-5.15-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "The highlights of this round are integrations with fs-verity and idmapped mounts, the rest is usual mix of minor improvements, speedups and cleanups. There are some patches outside of btrfs, namely updating some VFS interfaces, all straightforward and acked. Features: - fs-verity support, using standard ioctls, backward compatible with read-only limitation on inodes with previously enabled fs-verity - idmapped mount support - make mount with rescue=ibadroots more tolerant to partially damaged trees - allow raid0 on a single device and raid10 on two devices, degenerate cases but might be useful as an intermediate step during conversion to other profiles - zoned mode block group auto reclaim can be disabled via sysfs knob Performance improvements: - continue readahead of node siblings even if target node is in memory, could speed up full send (on sample test +11%) - batching of delayed items can speed up creating many files - fsync/tree-log speedups - avoid unnecessary work (gains +2% throughput, -2% run time on sample load) - reduced lock contention on renames (on dbench +4% throughput, up to -30% latency) Fixes: - various zoned mode fixes - preemptive flushing threshold tuning, avoid excessive work on almost full filesystems Core: - continued subpage support, preparation for implementing remaining features like compression and defragmentation; with some limitations, write is now enabled on 64K page systems with 4K sectors, still considered experimental - no readahead on compressed reads - inline extents disabled - disabled raid56 profile conversion and mount - improved flushing logic, fixing early ENOSPC on some workloads - inode flags have been internally split to read-only and read-write incompat bit parts, used by fs-verity - new tree items for fs-verity - descriptor item - Merkle tree item - inode operations extended to be namespace-aware - cleanups and refactoring Generic code changes: - fs: new export filemap_fdatawrite_wbc - fs: removed sync_inode - block: bio_trim argument type fixups - vfs: add namespace-aware lookup" * tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits) btrfs: reset replace target device to allocation state on close btrfs: zoned: fix ordered extent boundary calculation btrfs: do not do preemptive flushing if the majority is global rsv btrfs: reduce the preemptive flushing threshold to 90% btrfs: tree-log: check btrfs_lookup_data_extent return value btrfs: avoid unnecessarily logging directories that had no changes btrfs: allow idmapped mount btrfs: handle ACLs on idmapped mounts btrfs: allow idmapped INO_LOOKUP_USER ioctl btrfs: allow idmapped SUBVOL_SETFLAGS ioctl btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids btrfs: allow idmapped SNAP_DESTROY ioctls btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls btrfs: check whether fsgid/fsuid are mapped during subvolume creation btrfs: allow idmapped permission inode op btrfs: allow idmapped setattr inode op btrfs: allow idmapped tmpfile inode op btrfs: allow idmapped symlink inode op btrfs: allow idmapped mkdir inode op ...
2021-08-23fs: add a filemap_fdatawrite_wbc helperJosef Bacik
Btrfs sometimes needs to flush dirty pages on a bunch of dirty inodes in order to reclaim metadata reservations. Unfortunately most helpers in this area are too smart for us: 1) The normal filemap_fdata* helpers only take range and sync modes, and don't give any indication of how much was written, so we can only flush full inodes, which isn't what we want in most cases. 2) The normal writeback path requires us to have the s_umount sem held, but we can't unconditionally take it in this path because we could deadlock. 3) The normal writeback path also skips inodes with I_SYNC set if we write with WB_SYNC_NONE. This isn't the behavior we want under heavy ENOSPC pressure, we want to actually make sure the pages are under writeback before returning, and if another thread is in the middle of writing the file we may return before they're under writeback and miss our ordered extents and not properly wait for completion. 4) sync_inode() uses the normal writeback path and has the same problem as #3. What we really want is to call do_writepages() with our wbc. This way we can make sure that writeback is actually started on the pages, and we can control how many pages are written as a whole as we write many inodes using the same wbc. Accomplish this with a new helper that does just that so we can use it for our ENOSPC flushing infrastructure. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-13mm: Add functions to lock invalidate_lock for two mappingsJan Kara
Some operations such as reflinking blocks among files will need to lock invalidate_lock for two mappings. Add helper functions to do that. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2021-07-13mm: Protect operations adding pages to page cache with invalidate_lockJan Kara
Currently, serializing operations such as page fault, read, or readahead against hole punching is rather difficult. The basic race scheme is like: fallocate(FALLOC_FL_PUNCH_HOLE) read / fault / .. truncate_inode_pages_range() <create pages in page cache here> <update fs block mapping and free blocks> Now the problem is in this way read / page fault / readahead can instantiate pages in page cache with potentially stale data (if blocks get quickly reused). Avoiding this race is not simple - page locks do not work because we want to make sure there are *no* pages in given range. inode->i_rwsem does not work because page fault happens under mmap_sem which ranks below inode->i_rwsem. Also using it for reads makes the performance for mixed read-write workloads suffer. So create a new rw_semaphore in the address_space - invalidate_lock - that protects adding of pages to page cache for page faults / reads / readahead. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2021-07-12mm: Fix comments mentioning i_mutexJan Kara
inode->i_mutex has been replaced with inode->i_rwsem long ago. Fix comments still mentioning i_mutex. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-07-03Merge branch 'work.iov_iter' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "iov_iter cleanups and fixes. There are followups, but this is what had sat in -next this cycle. IMO the macro forest in there became much thinner and easier to follow..." * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) csum_and_copy_to_pipe_iter(): leave handling of csum_state to caller clean up copy_mc_pipe_to_iter() pipe_zero(): we don't need no stinkin' kmap_atomic()... iov_iter: clean csum_and_copy_...() primitives up a bit copy_page_from_iter(): don't need kmap_atomic() for kvec/bvec cases copy_page_to_iter(): don't bother with kmap_atomic() for bvec/kvec cases iterate_xarray(): only of the first iteration we might get offset != 0 pull handling of ->iov_offset into iterate_{iovec,bvec,xarray} iov_iter: make iterator callbacks use base and len instead of iovec iov_iter: make the amount already copied available to iterator callbacks iov_iter: get rid of separate bvec and xarray callbacks iov_iter: teach iterate_{bvec,xarray}() about possible short copies iterate_bvec(): expand bvec.h macro forest, massage a bit iov_iter: unify iterate_iovec and iterate_kvec iov_iter: massage iterate_iovec and iterate_kvec to logics similar to iterate_bvec iterate_and_advance(): get rid of magic in case when n is 0 csum_and_copy_to_iter(): massage into form closer to csum_and_copy_from_iter() iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant [xarray] iov_iter_npages(): just use DIV_ROUND_UP() iov_iter_npages(): don't bother with iterate_all_kinds() ...
2021-06-29mm: charge active memcg when no mm is setDan Schatzberg
set_active_memcg() worked for kernel allocations but was silently ignored for user pages. This patch establishes a precedence order for who gets charged: 1. If there is a memcg associated with the page already, that memcg is charged. This happens during swapin. 2. If an explicit mm is passed, mm->memcg is charged. This happens during page faults, which can be triggered in remote VMs (eg gup). 3. Otherwise consult the current process context. If there is an active_memcg, use that. Otherwise, current->mm->memcg. Previously, if a NULL mm was passed to mem_cgroup_charge (case 3) it would always charge the root cgroup. Now it looks up the active_memcg first (falling back to charging the root cgroup if not set). Link: https://lkml.kernel.org/r/20210610173944.1203706-3-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-10iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing ↵Al Viro
variant Replacement is called copy_page_from_iter_atomic(); unlike the old primitive the callers do *not* need to do iov_iter_advance() after it. In case when they end up consuming less than they'd been given they need to do iov_iter_revert() on everything they had not consumed. That, however, needs to be done only on slow paths. All in-tree callers converted. And that kills the last user of iterate_all_kinds() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-06-02generic_perform_write()/iomap_write_actor(): saner logics for short copyAl Viro
if we run into a short copy and ->write_end() refuses to advance at all, use the amount we'd managed to copy for the next iteration to handle. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>