| Age | Commit message (Collapse) | Author |
|---|
|
For system with kernelcore=mirror enabled while no mirrored memory is
reported by efi. This could lead to kernel OOM during startup since all
memory beside zone DMA are in the movable zone and this prevents the
kernel to use it.
Zone DMA/DMA32 initialization is independent of mirrored memory and their
max pfn is set in zone_sizes_init(). Since kernel can fallback to zone
DMA/DMA32 if there is no memory in zone Normal, these zones are seen as
mirrored memory no mather their memory attributes are.
To solve this problem, disable kernelcore=mirror when there is no real
mirrored memory exists.
Link: https://lkml.kernel.org/r/20230802072328.2107981-1-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Suggested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
UAF"
This reverts commit 9e46e4dcd9d6cd88342b028dbfa5f4fb7483d39c.
kbuild reports a warning in memblock_remove_region() because of a false
positive caused by partial reset of the memblock state.
Doing the full reset will remove the false positives, but will allow
late use of memblock_free() to go unnoticed, so it is better to revert
the offending commit.
WARNING: CPU: 0 PID: 1 at mm/memblock.c:352 memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00001-g9e46e4dcd9d6 #2
RIP: 0010:memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1))
Call Trace:
memblock_discard (kbuild/src/x86_64/mm/memblock.c:383)
page_alloc_init_late (kbuild/src/x86_64/include/linux/find.h:208 kbuild/src/x86_64/include/linux/nodemask.h:266 kbuild/src/x86_64/mm/mm_init.c:2405)
kernel_init_freeable (kbuild/src/x86_64/init/main.c:1325 kbuild/src/x86_64/init/main.c:1546)
kernel_init (kbuild/src/x86_64/init/main.c:1439)
ret_from_fork (kbuild/src/x86_64/arch/x86/kernel/process.c:145)
ret_from_fork_asm (kbuild/src/x86_64/arch/x86/entry/entry_64.S:298)
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202307271656.447aa17e-oliver.sang@intel.com
Signed-off-by: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The memblock_discard function frees the memblock.reserved.regions
array, which is good.
However, if a subsequent memblock_free (or memblock_phys_free) comes
in later, from for example ima_free_kexec_buffer, that will result in
a use after free bug in memblock_isolate_range.
When running a kernel with CONFIG_KASAN enabled, this will cause a
kernel panic very early in boot. Without CONFIG_KASAN, there is
a chance that memblock_isolate_range might scribble on memory
that is now in use by somebody else.
Avoid those issues by making sure that memblock_discard points
memblock.reserved.regions back at the static buffer.
If memblock_free is called after memblock memory is discarded, that will
print a warning in memblock_remove_region.
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20230719154137.732d8525@imladris.surriel.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- add test for memblock_alloc_node()
- minor coding style fixes
- add flags and nid info in memblock debugfs
* tag 'memblock-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Update nid info in memblock debugfs
memblock: Add flags and nid info in memblock debugfs
Fix some coding style errors in memblock.c
Add tests for memblock_alloc_node()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
early_pfn_to_nid() is called frequently in init_reserved_page(), it
returns the node id of the PFN. These PFN are probably from the same
memory region, they have the same node id. It's not necessary to call
early_pfn_to_nid() for each PFN.
Pass nid to reserve_bootmem_region() and drop the call to
early_pfn_to_nid() in init_reserved_page(). Also, set nid on all reserved
pages before doing this, as some reserved memory regions may not be set
nid.
The most beneficial function is memmap_init_reserved_pages() if
CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled.
The following data was tested on an x86 machine with 190GB of RAM.
before:
memmap_init_reserved_pages() 67ms
after:
memmap_init_reserved_pages() 20ms
Link: https://lkml.kernel.org/r/20230619023406.424298-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
managed pages has already been set to 0 in free_area_init_core_hotplug(),
via zone_init_internals() on each zone. It's pointless to reset again.
Furthermore, reset_node_managed_pages() no longer needs to be exposed
outside of mm/memblock.c. Remove declaration in include/linux/memblock.h
and define it as static.
In addtion to this, the only caller of reset_node_managed_pages() is
reset_all_zones_managed_pages(), which is annotated with __init, so it
should be safe to also mark reset_node_managed_pages() as __init.
Link: https://lkml.kernel.org/r/20230607024548.1240-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
|
The node id for memblock reserved regions will be wrong,
so let's show 'x' for reg->nid == MAX_NUMNODES in debugfs to keep it align.
Suggested-by: Mike Rapoport (IBM) <rppt@kernel.org>
Co-developed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Yuwei Guan <ssawgyw@gmail.com>
Link: https://lore.kernel.org/r/20230601133149.37160-1-ssawgyw@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Currently, the memblock debugfs can display the count of memblock_type and
the base and end of the reg. However, when memblock_mark_*() or
memblock_set_node() is executed on some range, the information in the
existing debugfs cannot make it clear why the address is not consecutive.
For example,
cat /sys/kernel/debug/memblock/memory
0: 0x0000000080000000..0x00000000901fffff
1: 0x0000000090200000..0x00000000905fffff
2: 0x0000000090600000..0x0000000092ffffff
3: 0x0000000093000000..0x00000000973fffff
4: 0x0000000097400000..0x00000000b71fffff
5: 0x00000000c0000000..0x00000000dfffffff
6: 0x00000000e2500000..0x00000000f87fffff
7: 0x00000000f8800000..0x00000000fa7fffff
8: 0x00000000fa800000..0x00000000fd3effff
9: 0x00000000fd3f0000..0x00000000fd3fefff
10: 0x00000000fd3ff000..0x00000000fd7fffff
11: 0x00000000fd800000..0x00000000fd901fff
12: 0x00000000fd902000..0x00000000fd909fff
13: 0x00000000fd90a000..0x00000000fd90bfff
14: 0x00000000fd90c000..0x00000000ffffffff
15: 0x0000000880000000..0x0000000affffffff
So we can add flags and nid to this debugfs.
For example,
cat /sys/kernel/debug/memblock/memory
0: 0x0000000080000000..0x00000000901fffff 0 NONE
1: 0x0000000090200000..0x00000000905fffff 0 NOMAP
2: 0x0000000090600000..0x0000000092ffffff 0 NONE
3: 0x0000000093000000..0x00000000973fffff 0 NOMAP
4: 0x0000000097400000..0x00000000b71fffff 0 NONE
5: 0x00000000c0000000..0x00000000dfffffff 0 NONE
6: 0x00000000e2500000..0x00000000f87fffff 0 NONE
7: 0x00000000f8800000..0x00000000fa7fffff 0 NOMAP
8: 0x00000000fa800000..0x00000000fd3effff 0 NONE
9: 0x00000000fd3f0000..0x00000000fd3fefff 0 NOMAP
10: 0x00000000fd3ff000..0x00000000fd7fffff 0 NONE
11: 0x00000000fd800000..0x00000000fd901fff 0 NOMAP
12: 0x00000000fd902000..0x00000000fd909fff 0 NONE
13: 0x00000000fd90a000..0x00000000fd90bfff 0 NOMAP
14: 0x00000000fd90c000..0x00000000ffffffff 0 NONE
15: 0x0000000880000000..0x0000000affffffff 0 NONE
Signed-off-by: Yuwei Guan <ssawgyw@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20230519105321.333-1-ssawgyw@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
This patch removes the initialization of some static variables to 0 and
`false` in the memblock source file, according to the coding style
guidelines.
Signed-off-by: Claudio Migliorelli <claudio.migliorelli@mail.polimi.it>
Link: https://lore.kernel.org/r/87r0sa7mm8.fsf@mail.polimi.it
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") results in
various boot failures (hang) on arm targets Debug messages reveal the
reason.
########### MAX_ORDER=10 start=0 __ffs(start)=-1 min()=10 min_t=-1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If start==0, __ffs(start) returns 0xfffffff or (as int) -1, which min_t()
interprets as such, while min() apparently uses the returned unsigned long
value. Obviously a negative order isn't received well by the rest of the
code.
[akpm@linux-foundation.org: fix comment, per Mike]
Link: https://lkml.kernel.org/r/ZDBa7HWZK69dKKzH@kernel.org
Link: https://lkml.kernel.org/r/20230406072529.vupqyrzqnhyozeyh@box.shutemov.name
Fixes: 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely")
Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/9460377a-38aa-4f39-ad57-fb73725f92db@roeck-us.net
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.
This definition is counter-intuitive and lead to number of bugs all over
the kernel.
Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.
[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Small optimizations:
- fix off-by-one in the check whether memblock_add_range() should
reallocate memory to accommodate newly inserted range
- check only for relevant regions in memblock_merge_regions() rather
than swipe over the entire array"
* tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Avoid useless checks in memblock_merge_regions().
memblock: Make a boundary tighter in memblock_add_range().
|
|
memblock_free_late()."
This reverts commit 115d9d77bb0f9152c60b6e8646369fa7f6167593.
The pages being freed by memblock_free_late() have already been
initialized, but if they are in the deferred init range,
__free_one_page() might access nearby uninitialized pages when trying to
coalesce buddies. This can, for example, trigger this BUG:
BUG: unable to handle page fault for address: ffffe964c02580c8
RIP: 0010:__list_del_entry_valid+0x3f/0x70
<TASK>
__free_one_page+0x139/0x410
__free_pages_ok+0x21d/0x450
memblock_free_late+0x8c/0xb9
efi_free_boot_services+0x16b/0x25c
efi_enter_virtual_mode+0x403/0x446
start_kernel+0x678/0x714
secondary_startup_64_no_verify+0xd2/0xdb
</TASK>
A proper fix will be more involved so revert this change for the time
being.
Fixes: 115d9d77bb0f ("mm: Always release pages to the buddy allocator in memblock_free_late().")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/20230207082151.1303-1-dev@aaront.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
memblock_merge_regions() is called after regions have been modified to
merge the neighboring compatible regions. That will check all regions
but most checks are useless.
Most of the time we only insert one or a few new regions, or modify one or
a few regions. At this time, we don't need to check all the regions. We
only need to check the changed regions, because other not related regions
cannot be merged.
Add two parameters to memblock_merge_regions() to indicate the lower and
upper boundary to scan.
Debug code that counts the number of total iterations in
memblock_merge_regions(), like for instance
void memblock_merge_regions(struct memblock_type *type)
{
static int iteration_count = 0;
static int max_nr_regions = 0;
max_nr_regions = max(max_nr_regions, (int)type->cnt);
...
while () {
iteration_count++;
...
}
pr_info("iteration_count: %d max_nr_regions %d", iteration_count,
max_nr_regions);
}
Produces the following numbers on a physical machine with 1T of memory:
before: [2.472243] iteration_count: 45410 max_nr_regions 178
after: [2.470869] iteration_count: 923 max_nr_regions 176
The actual startup speed seems to change little, but it does reduce the
scan overhead.
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Link: https://lore.kernel.org/r/20230129090034.12310-3-zhangpeng.00@bytedance.com
[rppt: massaged the changelog]
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
When type->cnt * 2 + 1 is less than or equal to type->max, there is
enough empty regions to insert.
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Link: https://lore.kernel.org/r/20230129090034.12310-2-zhangpeng.00@bytedance.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
memblock_phys_free() is the counterpart to memblock_phys_alloc.
Change memblock_alloc_xx() with memblock_phys_alloc_xx() to keep
consistency.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20221216100304.688209-1-linmq006@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Add pageblock_align() macro and use it to simplify code.
Link: https://lkml.kernel.org/r/20220907060844.126891-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move pageblock_start_pfn/pageblock_end_pfn() into pageblock-flags.h, then
they could be used somewhere else, not only in compaction, also use
ALIGN_DOWN() instead of round_down() to be pair with ALIGN(), which should
be same for pageblock usage.
Link: https://lkml.kernel.org/r/20220907060844.126891-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- An optimization in memblock_add_range() to reduce array traversals
- Improvements to the memblock test suite
* tag 'memblock-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock test: Modify the obsolete description in README
memblock tests: fix compilation errors
memblock tests: change build options to run-time options
memblock tests: remove completed TODO items
memblock tests: set memblock_debug to enable memblock_dbg() messages
memblock tests: add verbose output to memblock tests
memblock tests: Makefile: add arguments to control verbosity
memblock: avoid some repeat when add new range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
In a system(Huawei Ascend ARM64 SoC) using HBM, a multi-bit ECC error
occurs, and the BIOS will mark the corresponding area (for example, 2 MB)
as unusable. When the system restarts next time, these areas are not
reported or reported as EFI_UNUSABLE_MEMORY. Both cases lead to an
increase in the number of memblocks, whereas EFI_UNUSABLE_MEMORY leads to
a larger number of memblocks.
For example, if the EFI_UNUSABLE_MEMORY type is reported:
...
memory[0x92] [0x0000200834a00000-0x0000200835bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x93] [0x0000200835c00000-0x0000200835dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x94] [0x0000200835e00000-0x00002008367fffff], 0x0000000000a00000 bytes on node 7 flags: 0x0
memory[0x95] [0x0000200836800000-0x00002008369fffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x96] [0x0000200836a00000-0x0000200837bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x97] [0x0000200837c00000-0x0000200837dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x98] [0x0000200837e00000-0x000020087fffffff], 0x0000000048200000 bytes on node 7 flags: 0x0
memory[0x99] [0x0000200880000000-0x0000200bcfffffff], 0x0000000350000000 bytes on node 6 flags: 0x0
memory[0x9a] [0x0000200bd0000000-0x0000200bd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9b] [0x0000200bd0200000-0x0000200bd07fffff], 0x0000000000600000 bytes on node 6 flags: 0x0
memory[0x9c] [0x0000200bd0800000-0x0000200bd09fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9d] [0x0000200bd0a00000-0x0000200fcfffffff], 0x00000003ff600000 bytes on node 6 flags: 0x0
memory[0x9e] [0x0000200fd0000000-0x0000200fd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9f] [0x0000200fd0200000-0x0000200fffffffff], 0x000000002fe00000 bytes on node 6 flags: 0x0
...
The EFI memory map is parsed to construct the memblock arrays before the
memblock arrays can be resized. As the result, memory regions beyond
INIT_MEMBLOCK_REGIONS are lost.
Add a new macro INIT_MEMBLOCK_MEMORY_REGIONS to replace
INIT_MEMBLOCK_REGTIONS to define the size of the static memblock.memory
array.
Allow overriding memblock.memory array size with architecture defined
INIT_MEMBLOCK_MEMORY_REGIONS and make arm64 to set
INIT_MEMBLOCK_MEMORY_REGIONS to 1024 when CONFIG_EFI is enabled.
Link: https://lkml.kernel.org/r/20220615102742.96450-1-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Darren Hart <darren@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org> [arm64]
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The worst case is that the new memory range overlaps all existing
regions, which requires type->cnt + 1 empty struct memblock_region slots in
the type->regions array.
So if type->cnt + 1 + type->cnt is less than type->max, we can insert
regions directly rather than calculate the needed amount before the
insertion.
And becase of merge operation in the end of function, tpye->cnt will
increase slowly for many cases.
This change allows to avoid unnecessary repeat of memblock ranges traversal
for many cases when adding new memory range.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
[rppt: massaged comment and changelog text]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
|
|
kmemleak_alloc_phys()
Patch series "mm: kmemleak: store objects allocated with physical address
separately and check when scan", v4.
The kmemleak_*_phys() interface uses "min_low_pfn" and "max_low_pfn" to
check address. But on some architectures, kmemleak_*_phys() is called
before those two variables initialized. The following steps will be
taken:
1) Add OBJECT_PHYS flag and rbtree for the objects allocated
with physical address
2) Store physical address in objects if allocated with OBJECT_PHYS
3) Check the boundary when scan instead of in kmemleak_*_phys()
This patch set will solve:
https://lore.kernel.org/r/20220527032504.30341-1-yee.lee@mediatek.com
https://lore.kernel.org/r/9dd08bb5-f39e-53d8-f88d-bec598a08c93@gmail.com
v3: https://lore.kernel.org/r/20220609124950.1694394-1-patrick.wang.shcn@gmail.com
v2: https://lore.kernel.org/r/20220603035415.1243913-1-patrick.wang.shcn@gmail.com
v1: https://lore.kernel.org/r/20220531150823.1004101-1-patrick.wang.shcn@gmail.com
This patch (of 4):
Remove the unused kmemleak_not_leak_phys() function. And remove the
min_count argument to kmemleak_alloc_phys() function, assume it's 0.
Link: https://lkml.kernel.org/r/20220611035551.1823303-1-patrick.wang.shcn@gmail.com
Link: https://lkml.kernel.org/r/20220611035551.1823303-2-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If system have some mirrored memory and mirrored feature is not specified
in boot parameter, the basic mirrored feature will be enabled and this will
lead to the following situations:
- memblock memory allocation prefers mirrored region. This may have some
unexpected influence on numa affinity.
- contiguous memory will be split into several parts if parts of them
is mirrored memory via memblock_mark_mirror().
To fix this, variable mirrored_kernelcore will be checked in
memblock_mark_mirror(). Mark mirrored memory with flag MEMBLOCK_MIRROR iff
kernelcore=mirror is added in the kernel parameters.
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614092156.1972846-6-mawupeng1@huawei.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
If system has mirrored memory, memblock will try to allocate mirrored
memory firstly and fallback to non-mirrored memory when fails, but if with
limited mirrored memory or some numa node without mirrored memory, lots of
warning message about memblock allocation will occur.
This patch ratelimit the warning message to avoid a very long print during
bootup.
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220614092156.1972846-3-mawupeng1@huawei.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Test suite and a small cleanup:
- A small cleanup of unused variable in __next_mem_pfn_range_in_zone
- Initial test suite to simulate memblock behaviour in userspace"
* tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits)
memblock tests: Add TODO and README files
memblock tests: Add memblock_alloc_try_nid tests for bottom up
memblock tests: Add memblock_alloc_try_nid tests for top down
memblock tests: Add memblock_alloc_from tests for bottom up
memblock tests: Add memblock_alloc_from tests for top down
memblock tests: Add memblock_alloc tests for bottom up
memblock tests: Add memblock_alloc tests for top down
memblock tests: Add simulation of physical memory
memblock tests: Split up reset_memblock function
memblock tests: Fix testing with 32-bit physical addresses
memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid
memblock tests: Add memblock_free tests
memblock tests: Add memblock_add_node test
memblock tests: Add memblock_remove tests
memblock tests: Add memblock_reserve tests
memblock tests: Add memblock_add tests
memblock tests: Add memblock reset function
memblock tests: Add skeleton of the memblock simulator
tools/include: Add debugfs.h stub
tools/include: Add pfn.h stub
...
|
|
The nid is only used to act as output parameter of __next_mem_range.
Since NULL can be passed to __next_mem_range as out_nid, we can thus
remove nid by passing NULL here.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
[rppt: updated the commit message]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
|
|
memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions
indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Fixes: 3010f876500f ("mm: discard memblock data later")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix double-evaluation of 'pte' macro argument when using 52-bit PAs
- Fix signedness of some MTE prctl PR_* constants
- Fix kmemleak memory usage by skipping early pgtable allocations
- Fix printing of CPU feature register strings
- Remove redundant -nostdlib linker flag for vDSO binaries
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: make __pte_to_phys/__phys_to_pte_val inline functions
arm64: Track no early_pgtable_alloc() for kmemleak
arm64: mte: change PR_MTE_TCF_NONE back into an unsigned long
arm64: vdso: remove -nostdlib compiler flag
arm64: arm64_ftr_reg->name may not be a human-readable string
|
|
After switched page size from 64KB to 4KB on several arm64 servers here,
kmemleak starts to run out of early memory pool due to a huge number of
those early_pgtable_alloc() calls:
kmemleak_alloc_phys()
memblock_alloc_range_nid()
memblock_phys_alloc_range()
early_pgtable_alloc()
init_pmd()
alloc_init_pud()
__create_pgd_mapping()
__map_memblock()
paging_init()
setup_arch()
start_kernel()
Increased the default value of DEBUG_KMEMLEAK_MEM_POOL_SIZE by 4 times
won't be enough for a server with 200GB+ memory. There isn't much
interesting to check memory leaks for those early page tables and those
early memory mappings should not reference to other memory. Hence, no
kmemleak false positives, and we can safely skip tracking those early
allocations from kmemleak like we did in the commit fed84c785270
("mm/memblock.c: skip kmemleak for kasan_init()") without needing to
introduce complications to automatically scale the value depends on the
runtime memory size etc. After the patch, the default value of
DEBUG_KMEMLEAK_MEM_POOL_SIZE becomes sufficient again.
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20211105150509.7826-1-quic_qiancai@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Let's add a flag that corresponds to IORESOURCE_SYSRAM_DRIVER_MANAGED,
indicating that we're dealing with a memory region that is never
indicated in the firmware-provided memory map, but always detected and
added by a driver.
Similar to MEMBLOCK_HOTPLUG, most infrastructure has to treat such
memory regions like ordinary MEMBLOCK_NONE memory regions -- for
example, when selecting memory regions to add to the vmcore for dumping
in the crashkernel via for_each_mem_range().
However, especially kexec_file is not supposed to select such memblocks
via for_each_free_mem_range() / for_each_free_mem_range_reverse() to
place kexec images, similar to how we handle
IORESOURCE_SYSRAM_DRIVER_MANAGED without CONFIG_ARCH_KEEP_MEMBLOCK.
We'll make sure that memory hotplug code sets the flag where applicable
(IORESOURCE_SYSRAM_DRIVER_MANAGED) next. This prepares architectures
that need CONFIG_ARCH_KEEP_MEMBLOCK, such as arm64, for virtio-mem
support.
Note that kexec *must not* indicate this memory to the second kernel and
*must not* place kexec-images on this memory. Let's add a comment to
kexec_walk_memblock(), documenting how we handle MEMBLOCK_DRIVER_MANAGED
now just like using IORESOURCE_SYSRAM_DRIVER_MANAGED in
locate_mem_hole_callback() for kexec_walk_resources().
Also note that MEMBLOCK_HOTPLUG cannot be reused due to different
semantics:
MEMBLOCK_HOTPLUG: memory is indicated as "System RAM" in the
firmware-provided memory map and added to the system early during
boot; kexec *has to* indicate this memory to the second kernel and
can place kexec-images on this memory. After memory hotunplug,
kexec has to be re-armed. We mostly ignore this flag when
"movable_node" is not set on the kernel command line, because
then we're told to not care about hotunpluggability of such
memory regions.
MEMBLOCK_DRIVER_MANAGED: memory is not indicated as "System RAM" in
the firmware-provided memory map; this memory is always detected
and added to the system by a driver; memory might not actually be
physically hotunpluggable. kexec *must not* indicate this memory to
the second kernel and *must not* place kexec-images on this memory.
Link: https://lkml.kernel.org/r/20211004093605.5830-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jianyong Wu <Jianyong.Wu@arm.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Shahab Vahedi <shahab@synopsys.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We want to specify flags when hotplugging memory. Let's prepare to pass
flags to memblock_add_node() by adjusting all existing users.
Note that when hotplugging memory the system is already up and running
and we might have concurrent memblock users: for example, while we're
hotplugging memory, kexec_file code might search for suitable memory
regions to place kexec images. It's important to add the memory
directly to memblock via a single call with the right flags, instead of
adding the memory first and apply flags later: otherwise, concurrent
memblock users might temporarily stumble over memblocks with wrong
flags, which will be important in a follow-up patch that introduces a
new flag to properly handle add_memory_driver_managed().
Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.com
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shahab Vahedi <shahab@synopsys.com> [arch/arc]
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jianyong Wu <Jianyong.Wu@arm.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memblock_free_late() is a NOP wrapper for __memblock_free_late(), there
is no point to keep this indirection.
Drop the wrapper and rename __memblock_free_late() to
memblock_free_late().
Link: https://lkml.kernel.org/r/20210930185031.18648-5-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Vladimir Zapolskiy reports:
Commit a7259df76702 ("memblock: make memblock_find_in_range method
private") invokes a kernel panic while running kmemleak on OF platforms
with nomaped regions:
Unable to handle kernel paging request at virtual address fff000021e00000
[...]
scan_block+0x64/0x170
scan_gray_list+0xe8/0x17c
kmemleak_scan+0x270/0x514
kmemleak_write+0x34c/0x4ac
The memory allocated from memblock is registered with kmemleak, but if
it is marked MEMBLOCK_NOMAP it won't have linear map entries so an
attempt to scan such areas will fault.
Ideally, memblock_mark_nomap() would inform kmemleak to ignore
MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces
operating on physical addresses can use __va() conversion.
Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP
take care of informing kmemleak to ignore such memory.
Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org
Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak")
breaks boot on EFI systems with kmemleak and VM_DEBUG enabled:
efi: Processing EFI memory map:
efi: 0x000090000000-0x000091ffffff [Conventional| | | | | | | | | | |WB|WT|WC|UC]
efi: 0x000092000000-0x0000928fffff [Runtime Data|RUN| | | | | | | | | |WB|WT|WC|UC]
------------[ cut here ]------------
kernel BUG at mm/kmemleak.c:1140!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kmemleak_free_part_phys+0x64/0x8c
lr : kmemleak_free_part_phys+0x38/0x8c
sp : ffff800011eafbc0
x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068
x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0
x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000
x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730
x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c
x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7
x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000
x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0
x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99
x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff
Call trace:
kmemleak_free_part_phys+0x64/0x8c
memblock_mark_nomap+0x5c/0x78
reserve_regions+0x294/0x33c
efi_init+0x2d0/0x490
setup_arch+0x80/0x138
start_kernel+0xa0/0x3ec
__primary_switched+0xc0/0xc8
Code: 34000041 97d526e7 f9418e80 36000040 (d4210000)
random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0
---[ end trace 0000000000000000 ]---
The crash happens because kmemleak_free_part_phys() tries to use __va()
before memstart_addr is initialized and this triggers a VM_BUG_ON() in
arch/arm64/include/asm/memory.h:
Revert 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak"),
the issue it is fixing will be fixed differently.
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mem=[X][G|M] is broken on ARM64 platform, there are cases that even
type.cnt is 1, but total_size is not 0 because regions are merged into
1. So only check 'cnt' is not enough, total_size should be used,
othersize bootargs 'mem=[X][G|B]' not work anymore.
Link: https://lkml.kernel.org/r/20210930024437.32598-1-peng.fan@oss.nxp.com
Fixes: e888fa7bb882 ("memblock: Check memory add/cap ordering")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Vladimir Zapolskiy reports:
commit a7259df76702 ("memblock: make memblock_find_in_range method private")
invokes a kernel panic while running kmemleak on OF platforms with nomaped
regions:
Unable to handle kernel paging request at virtual address fff000021e00000
[...]
scan_block+0x64/0x170
scan_gray_list+0xe8/0x17c
kmemleak_scan+0x270/0x514
kmemleak_write+0x34c/0x4ac
Indeed, NOMAP regions don't have linear map entries so an attempt to scan
these areas would fault.
Prevent such faults by excluding NOMAP regions from kmemleak.
Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
|
|
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.
Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:
https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/
or just random memory corruption if the debug checks don't catch it:
https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/
I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.
I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.
So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer. And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
There are a lot of uses of memblock_find_in_range() along with
memblock_reserve() from the times memblock allocation APIs did not exist.
memblock_find_in_range() is the very core of memblock allocations, so any
future changes to its internal behaviour would mandate updates of all the
users outside memblock.
Replace the calls to memblock_find_in_range() with an equivalent calls to
memblock_phys_alloc() and memblock_phys_alloc_range() and make
memblock_find_in_range() private method of memblock.
This simplifies the callers, ensures that (unlikely) errors in
memblock_reserve() are handled and improves maintainability of
memblock_find_in_range().
Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv]
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Functions memblock_alloc_exact_nid_raw() and memblock_alloc_try_nid_raw()
are intended for early memory allocation without overhead of zeroing the
allocated memory. Since these functions were used to allocate the memory
map, they have ended up with addition of a call to page_init_poison() that
poisoned the allocated memory when CONFIG_PAGE_POISON was set.
Since the memory map is allocated using a dedicated memmep_alloc()
function that takes care of the poisoning, remove page poisoning from the
memblock_alloc_*_raw() functions.
Link: https://lkml.kernel.org/r/20210714123739.16493-5-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For memblock_cap_memory_range() to work properly, it should be called
after memory is detected and added to memblock with memblock_add() or
memblock_add_node(). If memblock_cap_memory_range() would be called
before memory is registered, we may silently corrupt memory later
because the crash kernel will see all memory as available.
Print a warning and bail out if ordering is not satisfied.
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/aabc5bad008d49f07d542815c6c8d28ec90bb09e.1628672091.git.geert+renesas@glider.be
|
|
All other memblock APIs built on top of memblock_add_range() contain
debug code to print their parameters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/c45e5218b6fcf0e3aeb63d9a9d9792addae0bb7a.1628672041.git.geert+renesas@glider.be
|
|
Commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with
for_each_mem_range()") didn't take into account that when there is
movable_node parameter in the kernel command line, for_each_mem_range()
would skip ranges marked with MEMBLOCK_HOTPLUG.
The page table setup code in POWER uses for_each_mem_range() to create
the linear mapping of the physical memory and since the regions marked
as MEMORY_HOTPLUG are skipped, they never make it to the linear map.
A later access to the memory in those ranges will fail:
BUG: Unable to handle kernel data access on write at 0xc000000400000000
Faulting instruction address: 0xc00000000008a3c0
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 53 Comm: kworker/u2:0 Not tainted 5.13.0 #7
NIP: c00000000008a3c0 LR: c0000000003c1ed8 CTR: 0000000000000040
REGS: c000000008a57770 TRAP: 0300 Not tainted (5.13.0)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 84222202 XER: 20040000
CFAR: c0000000003c1ed4 DAR: c000000400000000 DSISR: 42000000 IRQMASK: 0
GPR00: c0000000003c1ed8 c000000008a57a10 c0000000019da700 c000000400000000
GPR04: 0000000000000280 0000000000000180 0000000000000400 0000000000000200
GPR08: 0000000000000100 0000000000000080 0000000000000040 0000000000000300
GPR12: 0000000000000380 c000000001bc0000 c0000000001660c8 c000000006337e00
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000040000000 0000000020000000 c000000001a81990 c000000008c30000
GPR24: c000000008c20000 c000000001a81998 000fffffffff0000 c000000001a819a0
GPR28: c000000001a81908 c00c000001000000 c000000008c40000 c000000008a64680
NIP clear_user_page+0x50/0x80
LR __handle_mm_fault+0xc88/0x1910
Call Trace:
__handle_mm_fault+0xc44/0x1910 (unreliable)
handle_mm_fault+0x130/0x2a0
__get_user_pages+0x248/0x610
__get_user_pages_remote+0x12c/0x3e0
get_arg_page+0x54/0xf0
copy_string_kernel+0x11c/0x210
kernel_execve+0x16c/0x220
call_usermodehelper_exec_async+0x1b0/0x2f0
ret_from_kernel_thread+0x5c/0x70
Instruction dump:
79280fa4 79271764 79261f24 794ae8e2 7ca94214 7d683a14 7c893a14 7d893050
7d4903a6 60000000 60000000 60000000 <7c001fec> 7c091fec 7c081fec 7c051fec
---[ end trace 490b8c67e6075e09 ]---
Making for_each_mem_range() include MEMBLOCK_HOTPLUG regions in the
traversal fixes this issue.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1976100
Link: https://lkml.kernel.org/r/20210712071132.20902-1-rppt@kernel.org
Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Fix arm crashes caused by holes in the memory map.
The coordination between freeing of unused memory map, pfn_valid() and
core mm assumptions about validity of the memory map in various ranges
was not designed for complex layouts of the physical memory with a lot
of holes all over the place.
Kefen Wang reported crashes in move_freepages() on a system with the
following memory layout [1]:
node 0: [mem 0x0000000080a00000-0x00000000855fffff]
node 0: [mem 0x0000000086a00000-0x0000000087dfffff]
node 0: [mem 0x000000008bd00000-0x000000008c4fffff]
node 0: [mem 0x000000008e300000-0x000000008ecfffff]
node 0: [mem 0x0000000090d00000-0x00000000bfffffff]
node 0: [mem 0x00000000cc000000-0x00000000dc9fffff]
node 0: [mem 0x00000000de700000-0x00000000de9fffff]
node 0: [mem 0x00000000e0800000-0x00000000e0bfffff]
node 0: [mem 0x00000000f4b00000-0x00000000f6ffffff]
node 0: [mem 0x00000000fda00000-0x00000000ffffefff]
These crashes can be mitigated by enabling CONFIG_HOLES_IN_ZONE on ARM
and essentially turning pfn_valid_within() to pfn_valid() instead of
having it hardwired to 1 on that architecture, but this would require
to keep CONFIG_HOLES_IN_ZONE solely for this purpose.
A cleaner approach is to update ARM's implementation of pfn_valid() to
take into accounting rounding of the freed memory map to pageblock
boundaries and make sure it returns true for PFNs that have memory map
entries even if there is no physical memory backing those PFNs"
Link: https://lore.kernel.org/lkml/2a1592ad-bc9d-4664-fd19-f7448a37edc0@huawei.com [1]
* tag 'memblock-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: extend pfn_valid to take into account freed memory map alignment
memblock: ensure there is no overflow in memblock_overlaps_region()
memblock: align freed memory map on pageblock boundaries with SPARSEMEM
memblock: free_unused_memmap: use pageblock units instead of MAX_ORDER
|
