summaryrefslogtreecommitdiff
path: root/mm/percpu.c
AgeCommit message (Collapse)Author
2017-07-26percpu: update header to contain bitmap allocator explanation.Dennis Zhou (Facebook)
The other patches contain a lot of information, so adding this information in a separate patch. It adds my copyright and a brief explanation of how the bitmap allocator works. There is a minor typo as well in the prior explanation so that is fixed. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: update pcpu_find_block_fit to use an iteratorDennis Zhou (Facebook)
The simple, and expensive, way to find a free area is to iterate over the entire bitmap until an area is found that fits the allocation size and alignment. This patch makes use of an iterate that find an area to check by using the block level contig hints. It will only return an area that can fit the size and alignment request. If the request can fit inside a block, it returns the first_free bit to start checking from to see if it can be fulfilled prior to the contig hint. The pcpu_alloc_area check has a bound of a block size added in case it is wrong. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: use metadata blocks to update the chunk contig hintDennis Zhou (Facebook)
The largest free region will either be a block level contig hint or an aggregate over the left_free and right_free areas of blocks. This is a much smaller set of free areas that need to be checked than a full traverse. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: update free path to take advantage of contig hintsDennis Zhou (Facebook)
The bitmap allocator must keep metadata consistent. The easiest way is to scan after every allocation for each affected block and the entire chunk. This is rather expensive. The free path can take advantage of current contig hints to prevent scanning within the start and end block. If a scan is needed, it can be done by scanning backwards from the start and forwards from the end to identify the entire free area this can be combined with. The blocks can then be updated by some basic checks rather than complete block scans. A chunk scan happens when the freed area makes a page free, a block free, or spans across blocks. This is necessary as the contig hint at this point could span across blocks. The check uses the minimum of page size and the block size to allow for variable sized blocks. There is a tradeoff here with not updating after every free. It is possible a contig hint in one block can be merged with the contig hint in the next block. This means the contig hint can be off by up to a page. However, if the chunk's contig hint is contained in one block, the contig hint will be accurate. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: update alloc path to only scan if contig hints are brokenDennis Zhou (Facebook)
Metadata is kept per block to keep track of where the contig hints are. Scanning can be avoided when the contig hints are not broken. In that case, left and right contigs have to be managed manually. This patch changes the allocation path hint updating to only scan when contig hints are broken. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: keep track of the best offset for contig hintsDennis Zhou (Facebook)
This patch makes the contig hint starting offset optimization from the previous patch as honest as it can be. For both chunk and block starting offsets, make sure it keeps the starting offset with the best alignment. The block skip optimization is added in a later patch when the pcpu_find_block_fit iterator is swapped in. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: skip chunks if the alloc does not fit in the contig hintDennis Zhou (Facebook)
This patch adds chunk->contig_bits_start to keep track of the contig hint's offset and the check to skip the chunk if it does not fit. If the chunk's contig hint starting offset cannot satisfy an allocation, the allocator assumes there is enough memory pressure in this chunk to either use a different chunk or create a new one. This accepts a less tight packing for a smoother latency curve. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: add first_bit to keep track of the first free in the bitmapDennis Zhou (Facebook)
This patch adds first_bit to keep track of the first free bit in the bitmap. This hint helps prevent scanning of fully allocated blocks. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: introduce bitmap metadata blocksDennis Zhou (Facebook)
This patch introduces the bitmap metadata blocks and adds the skeleton of the code that will be used to maintain these blocks. Each chunk's bitmap is made up of full metadata blocks. These blocks maintain basic metadata to help prevent scanning unnecssarily to update hints. Full scanning methods are used for the skeleton and will be replaced in the coming patches. A number of helper functions are added as well to do conversion of pages to blocks and manage offsets. Comments will be updated as the final version of each function is added. There exists a relationship between PAGE_SIZE, PCPU_BITMAP_BLOCK_SIZE, the region size, and unit_size. Every chunk's region (including offsets) is page aligned at the beginning to preserve alignment. The end is aligned to LCM(PAGE_SIZE, PCPU_BITMAP_BLOCK_SIZE) to ensure that the end can fit with the populated page map which is by page and every metadata block is fully accounted for. The unit_size is already page aligned, but must also be aligned with PCPU_BITMAP_BLOCK_SIZE to ensure full metadata blocks. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: replace area map allocator with bitmapDennis Zhou (Facebook)
The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: generalize bitmap (un)populated iteratorsDennis Zhou (Facebook)
The area map allocator only used a bitmap for the backing page state. The new bitmap allocator will use bitmaps to manage the allocation region in addition to this. This patch generalizes the bitmap iterators so they can be reused with the bitmap allocator. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: increase minimum percpu allocation size and align first regionsDennis Zhou (Facebook)
This patch increases the minimum allocation size of percpu memory to 4-bytes. This change will help minimize the metadata overhead associated with the bitmap allocator. The assumption is that most allocations will be of objects or structs greater than 2 bytes with integers or longs being used rather than shorts. The first chunk regions are now aligned with the minimum allocation size. The reserved region is expected to be set as a multiple of the minimum allocation size. The static region is aligned up and the delta is removed from the dynamic size. This works because the dynamic size is increased to be page aligned. If the static size is not minimum allocation size aligned, then there must be a gap that is added to the dynamic size. The dynamic size will never be smaller than the set value. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: introduce nr_empty_pop_pages to help empty page accountingDennis Zhou (Facebook)
pcpu_nr_empty_pop_pages is used to ensure there are a handful of free pages around to serve atomic allocations. A new field, nr_empty_pop_pages, is added to the pcpu_chunk struct to keep track of the number of empty pages. This field is needed as the number of empty populated pages is globally tracked and deltas are used to update in the bitmap allocator. Pages that contain a hidden area are not considered to be empty. This new field is exposed in percpu_stats. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: change the number of pages marked in the first_chunk pop bitmapDennis Zhou (Facebook)
The populated bitmap represents the state of the pages the chunk serves. Prior, the bitmap was marked completely used as the first chunk was allocated and immutable. This is misleading because the first chunk may not be completely filled. Additionally, with moving the base_addr up in the previous patch, the population check no longer corresponds to what was being checked. This patch modifies the population map to be only the number of pages the region serves and to make what it was checking correspond correctly again. The change is to remove any misunderstanding between the size of the populated bitmap and the actual size of it. The work function page iterators now use nr_pages for the check rather than pcpu_unit_pages because nr_populated is now chunk specific. Without this, the work function would try to populate the remainder of these chunks despite it not serving any more than nr_pages when nr_pages is set less than pcpu_unit_pages. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: combine percpu address checksDennis Zhou (Facebook)
The percpu address checks for the reserved and dynamic region chunks are now specific to each region. The address checking logic can be combined taking advantage of the global references to the dynamic and static region chunks. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: modify base_addr to be region specificDennis Zhou (Facebook)
Originally, the first chunk was served by one or two chunks, each given a region they are responsible for. Despite this, the arithmetic was based off of the true base_addr of the chunk making it be overly inclusive. This patch moves the base_addr of chunks that are responsible for the first chunk. The base_addr must remain page aligned to keep the address alignment correct, so it is the beginning of the region served page aligned down. start_offset holds where the region served begins from this new base_addr. The corresponding percpu address checks are modified to be more specific as a result. The first chunk considers only the dynamic region and both first chunk and reserved chunk checks ignore the static region. The static region addresses should never be passed into the allocator. There is no impact here besides distinguishing the first chunk and making the checks specific. The percpu pointer to physical address is left intact as addresses are not given out in the non-allocated portion of percpu memory. nr_pages is added to pcpu_chunk to keep track of the size of the entire region served containing both start_offset and end_offset. This variable will be used to manage the bitmap allocator. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: setup_first_chunk rename schunk/dchunk to chunkDennis Zhou (Facebook)
There is no need to have the static chunk and dynamic chunk be named separately as the allocations are sequential. This preemptively solves the misnomer problem with the base_addrs being moved up in the following patch. It also removes a ternary operation deciding the first chunk. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: end chunk area maps page aligned for the populated bitmapDennis Zhou (Facebook)
The area map allocator manages the first chunk area by hiding all but the region it is responsible for serving in the area map. To align this with the populated page bitmap, end_offset is introduced to keep track of the delta to end page aligned. The area map is appended with the page aligned end when necessary to be in line with how the bitmap allocator requires the ending to be aligned with the LCM of PAGE_SIZE and the size of each bitmap block. percpu_stats is updated to ignore this region when present. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: unify allocation of schunk and dchunkDennis Zhou (Facebook)
Create a common allocator for first chunk initialization, pcpu_alloc_first_chunk. Comments for this function will be added in a later patch once the bitmap allocator is added. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: setup_first_chunk remove dyn_size and consolidate logicDennis Zhou (Facebook)
There is logic for setting variables in the static chunk init code that could be consolidated with the dynamic chunk init code. This combines this logic to setup for combining the allocation paths. reserved_size is used as the conditional as a dynamic region will always exist. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: remove has_reserved from pcpu_chunkDennis Zhou (Facebook)
Prior this variable was used to manage statistics when the first chunk had a reserved region. The previous patch introduced start_offset to keep track of the offset by value rather than boolean. Therefore, has_reserved can be removed. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: introduce start_offset to pcpu_chunkDennis Zhou (Facebook)
The reserved chunk arithmetic uses a global variable pcpu_reserved_chunk_limit that is set in the first chunk init code to hide a portion of the area map. The bitmap allocator to come will eventually move the base_addr up and require both the reserved chunk and static chunk to maintain this offset. pcpu_reserved_chunk_limit is removed and start_offset is added. The first chunk that is circulated and is pcpu_first_chunk serves the dynamic region, the region following the reserved region. The reserved chunk address check will temporarily use the first chunk to identify its address range. A following patch will increase the base_addr and remove this. If there is no reserved chunk, this will check the static region and return false because those values should never be passed into the allocator. Lastly, when linking in the first chunk, make sure to count the right free region for the number of empty populated pages. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-26percpu: setup_first_chunk enforce dynamic region must existDennis Zhou (Facebook)
The first chunk is handled as a special case as it is composed of the static, reserved, and dynamic regions. The code handles each case individually. The next several patches will merge these code paths and lay the foundation for the bitmap allocator. This patch modifies logic to enforce that a dynamic region exists and changes the area map to account for that. This brings the logic closer to the dynamic chunk's init logic. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-17percpu: update the header comment and pcpu_build_alloc_info commentsDennis Zhou (Facebook)
The header comment for percpu memory is a little hard to parse and is not super clear about how the first chunk is managed. This adds a little more clarity to the situation. There is also quite a bit of tricky logic in the pcpu_build_alloc_info. This adds a restructure of a comment to add a little more information. Unfortunately, you will still have to piece together a handful of other comments too, but should help direct you to the meaningful comments. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-17percpu: expose pcpu_nr_empty_pop_pages in pcpu_statsDennis Zhou (Facebook)
Percpu memory holds a minimum threshold of pages that are populated in order to serve atomic percpu memory requests. This change makes it easier to verify that there are a minimum number of populated pages lying around. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-21percpu: resolve err may not be initialized in pcpu_allocDennis Zhou
From 4a42ecc735cff0015cc73c3d87edede631f4b885 Mon Sep 17 00:00:00 2001 From: Dennis Zhou <dennisz@fb.com> Date: Wed, 21 Jun 2017 08:07:15 -0700 Add error message to out of space failure for atomic allocations in percpu allocation path to fix -Wmaybe-uninitialized. Signed-off-by: Dennis Zhou <dennisz@fb.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-20percpu: add tracepoint support for percpu memoryDennis Zhou
Add support for tracepoints to the following events: chunk allocation, chunk free, area allocation, area free, and area allocation failure. This should let us replay percpu memory requests and evaluate corresponding decisions. Signed-off-by: Dennis Zhou <dennisz@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-20percpu: expose statistics about percpu memory via debugfsDennis Zhou
There is limited visibility into the use of percpu memory leaving us unable to reason about correctness of parameters and overall use of percpu memory. These counters and statistics aim to help understand basic statistics about percpu memory such as number of allocations over the lifetime, allocation sizes, and fragmentation. New Config: PERCPU_STATS Signed-off-by: Dennis Zhou <dennisz@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-20percpu: migrate percpu data structures to internal headerDennis Zhou
Migrates pcpu_chunk definition and a few percpu static variables to an internal header file from mm/percpu.c. These will be used with debugfs to expose statistics about percpu memory improving visibility regarding allocations and fragmentation. Signed-off-by: Dennis Zhou <dennisz@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-20percpu: add missing lockdep_assert_held to func pcpu_free_areaDennis Zhou
Add a missing lockdep_assert_held for pcpu_lock to improve consistency and safety throughout mm/percpu.c. Signed-off-by: Dennis Zhou <dennisz@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-10mark most percpu globals as __ro_after_initDaniel Micay
Moving pcpu_base_addr to this section comes from PaX where it's part of KERNEXEC. This extends it to the rest of the globals only written by the init code. Signed-off-by: Daniel Micay <danielmicay@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-04-04Merge branch 'sched/core' into locking/coreThomas Gleixner
Required for the rtmutex/sched_deadline patches which depend on both branches
2017-03-26lockdep: Fix per-cpu static objectsPeter Zijlstra
Since commit 383776fa7527 ("locking/lockdep: Handle statically initialized PER_CPU locks properly") we try to collapse per-cpu locks into a single class by giving them all the same key. For this key we choose the canonical address of the per-cpu object, which would be the offset into the per-cpu area. This has two problems: - there is a case where we run !0 lock->key through static_obj() and expect this to pass; it doesn't for canonical pointers. - 0 is a valid canonical address. Cure both issues by redefining the canonical address as the address of the per-cpu variable on the boot CPU. Since I didn't want to rely on CPU0 being the boot-cpu, or even existing at all, track the boot CPU in a variable. Fixes: 383776fa7527 ("locking/lockdep: Handle statically initialized PER_CPU locks properly") Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@suse.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-mm@kvack.org Cc: wfg@linux.intel.com Cc: kernel test robot <fengguang.wu@intel.com> Cc: LKP <lkp@01.org> Link: http://lkml.kernel.org/r/20170320114108.kbvcsuepem45j5cr@hirez.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-16locking/lockdep: Handle statically initialized PER_CPU locks properlyThomas Gleixner
If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-06percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pagesTahsin Erdogan
Update to pcpu_nr_empty_pop_pages in pcpu_alloc() is currently done without holding pcpu_lock. This can lead to bad updates to the variable. Add missing lock calls. Fixes: b539b87fed37 ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated") Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v3.18+
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-13Merge branch 'for-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu update from Tejun Heo: "This includes just one patch to reject non-power-of-2 alignments and trigger warning. Interestingly, this actually caught a bug in XEN ARM64" * 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: ensure the requested alignment is power of two
2016-12-12mm/percpu.c: fix panic triggered by BUG_ON() falselyzijun_hu
As shown by pcpu_build_alloc_info(), the number of units within a percpu group is deduced by rounding up the number of CPUs within the group to @upa boundary/ Therefore, the number of CPUs isn't equal to the units's if it isn't aligned to @upa normally. However, pcpu_page_first_chunk() uses BUG_ON() to assert that one number is equal to the other roughly, so a panic is maybe triggered by the BUG_ON() incorrectly. In order to fix this issue, the number of CPUs is rounded up then compared with units's and the BUG_ON() is replaced with a warning and return of an error code as well, to keep system alive as much as possible. Link: http://lkml.kernel.org/r/57FCF07C.2020103@zoho.com Signed-off-by: zijun_hu <zijun_hu@htc.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-19percpu: ensure the requested alignment is power of twozijun_hu
The percpu allocator expectedly assumes that the requested alignment is power of two but hasn't been veryfing the input. If the specified alignment isn't power of two, the allocator can malfunction. Add the sanity check. The following is detailed analysis of the effects of alignments which aren't power of two. The alignment must be a even at least since the LSB of a chunk->map element is used as free/in-use flag of a area; besides, the alignment must be a power of 2 too since ALIGN() doesn't work well for other alignment always but is adopted by pcpu_fit_in_area(). IOW, the current allocator only works well for a power of 2 aligned area allocation. See below opposite example for why an odd alignment doesn't work. Let's assume area [16, 36) is free but its previous one is in-use, we want to allocate a @size == 8 and @align == 7 area. The larger area [16, 36) is split to three areas [16, 21), [21, 29), [29, 36) eventually. However, due to the usage for a chunk->map element, the actual offset of the aim area [21, 29) is 21 but is recorded in relevant element as 20; moreover, the residual tail free area [29, 36) is mistook as in-use and is lost silently Unlike macro roundup(), ALIGN(x, a) doesn't work if @a isn't a power of 2 for example, roundup(10, 6) == 12 but ALIGN(10, 6) == 10, and the latter result isn't desired obviously. tj: Code style and patch description updates. Signed-off-by: zijun_hu <zijun_hu@htc.com> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-05mm/percpu.c: fix potential memory leakage for pcpu_embed_first_chunk()zijun_hu
in order to ensure the percpu group areas within a chunk aren't distributed too sparsely, pcpu_embed_first_chunk() goes to error handling path when a chunk spans over 3/4 VMALLOC area, however, during the error handling, it forget to free the memory allocated for all percpu groups by going to label @out_free other than @out_free_areas. it will cause memory leakage issue if the rare scene really happens, in order to fix the issue, we check chunk spanned area immediately after completing memory allocation for all percpu groups, we go to label @out_free_areas to free the memory then return if the checking is failed. in order to verify the approach, we dump all memory allocated then enforce the jump then dump all memory freed, the result is okay after checking whether we free all memory we allocate in this function. BTW, The approach is chosen after thinking over the below scenes - we don't go to label @out_free directly to fix this issue since we maybe free several allocated memory blocks twice - the aim of jumping after pcpu_setup_first_chunk() is bypassing free usable memory other than handling error, moreover, the function does not return error code in any case, it either panics due to BUG_ON() or return 0. Signed-off-by: zijun_hu <zijun_hu@htc.com> Tested-by: zijun_hu <zijun_hu@htc.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-05mm/percpu.c: correct max_distance calculation for pcpu_embed_first_chunk()zijun_hu
pcpu_embed_first_chunk() calculates the range a percpu chunk spans into @max_distance and uses it to ensure that a chunk is not too big compared to the total vmalloc area. However, during calculation, it used incorrect top address by adding a unit size to the highest group's base address. This can make the calculated max_distance slightly smaller than the actual distance although given the scale of values involved the error is very unlikely to have an actual impact. Fix this issue by adding the group's size instead of a unit size. BTW, The type of variable max_distance is changed from size_t to unsigned long too based on below consideration: - type unsigned long usually have same width with IP core registers and can be applied at here very well - make @max_distance type consistent with the operand calculated against it such as @ai->groups[i].base_offset and macro VMALLOC_TOTAL - type unsigned long is more universal then size_t, size_t is type defined to unsigned int or unsigned long among various ARCHs usually Signed-off-by: zijun_hu <zijun_hu@htc.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-25percpu: fix synchronization between synchronous map extension and chunk ↵Tejun Heo
destruction For non-atomic allocations, pcpu_alloc() can try to extend the area map synchronously after dropping pcpu_lock; however, the extension wasn't synchronized against chunk destruction and the chunk might get freed while extension is in progress. This patch fixes the bug by putting most of non-atomic allocations under pcpu_alloc_mutex to synchronize against pcpu_balance_work which is responsible for async chunk management including destruction. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: stable@vger.kernel.org # v3.18+ Fixes: 1a4d76076cda ("percpu: implement asynchronous chunk population")
2016-05-25percpu: fix synchronization between chunk->map_extend_work and chunk destructionTejun Heo
Atomic allocations can trigger async map extensions which is serviced by chunk->map_extend_work. pcpu_balance_work which is responsible for destroying idle chunks wasn't synchronizing properly against chunk->map_extend_work and may end up freeing the chunk while the work item is still in flight. This patch fixes the bug by rolling async map extension operations into pcpu_balance_work. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: stable@vger.kernel.org # v3.18+ Fixes: 9c824b6a172c ("percpu: make sure chunk->map array has available space")
2016-03-17mm: percpu: use pr_fmt to prefix outputJoe Perches
Use the normal mechanism to make the logging output consistently "percpu:" instead of a mix of "PERCPU:" and "percpu:" Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: convert printk(KERN_<LEVEL> to pr_<level>Joe Perches
Most of the mm subsystem uses pr_<level> so make it consistent. Miscellanea: - Realign arguments - Add missing newline to format - kmemleak-test.c has a "kmemleak: " prefix added to the "Kmemleak testing" logging message via pr_fmt Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: coalesce split stringsJoe Perches
Kernel style prefers a single string over split strings when the string is 'user-visible'. Miscellanea: - Add a missing newline - Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: convert pr_warning to pr_warnJoe Perches
There are a mixture of pr_warning and pr_warn uses in mm. Use pr_warn consistently. Miscellanea: - Coalesce formats - Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22tree wide: use kvfree() than conditional kfree()/vfree()Tetsuo Handa
There are many locations that do if (memory_was_allocated_by_vmalloc) vfree(ptr); else kfree(ptr); but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory using is_vmalloc_addr(). Unless callers have special reasons, we can replace this branch with kvfree(). Please check and reply if you found problems. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: David Rientjes <rientjes@google.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Boris Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm/percpu: use offset_in_page macroAlexander Kuleshov
linux/mm.h provides offset_in_page() macro. Let's use already predefined macro instead of (addr & ~PAGE_MASK). Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-21percpu: clean up of schunk->map[] assignment in pcpu_setup_first_chunkBaoquan He
The original assignment is a little redundent. Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>