| Age | Commit message (Collapse) | Author |
|---|
|
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b518154e59aa ("mm/vmscan: protect the workingset on anonymous
LRU") requires to look twice for both mapped anon/file pages are used
more than once to take the decission of reclaim or activation. Correct
the documentation accordingly.
Link: https://lkml.kernel.org/r/1646925640-21324-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__isolate_lru_page_prepare() conflates two unrelated functions, with the
flags to one disjoint from the flags to the other; and hides some of the
important checks outside of isolate_migratepages_block(), where the
sequence is better to be visible. It comes from the days of lumpy
reclaim, before compaction, when the combination made more sense.
Move what's needed by mm/compaction.c isolate_migratepages_block() inline
there, and what's needed by mm/vmscan.c isolate_lru_pages() inline there.
Shorten "isolate_mode" to "mode", so the sequence of conditions is easier
to read. Declare a "mapping" variable, to save one call to page_mapping()
(but not another: calling again after page is locked is necessary).
Simplify isolate_lru_pages() with a "move_to" list pointer.
Link: https://lkml.kernel.org/r/879d62a8-91cc-d3c6-fb3b-69768236df68@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PF_SWAPWRITE has been redundant since v3.2 commit ee72886d8ed5 ("mm:
vmscan: do not writeback filesystem pages in direct reclaim").
Coincidentally, NeilBrown's current patch "remove inode_congested()"
deletes may_write_to_inode(), which appeared to be the one function which
took notice of PF_SWAPWRITE. But if you study the old logic, and the
conditions under which may_write_to_inode() was called, you discover that
flag and function have been pointless for a decade.
Link: https://lkml.kernel.org/r/75e80e7-742d-e3bd-531-614db8961e4@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Jan Kara <jack@suse.de>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These functions are no longer useful as no BDIs report congestions any
more.
Removing the test on bdi_write_contested() in current_may_throttle()
could cause a small change in behaviour, but only when PF_LOCAL_THROTTLE
is set.
So replace the calls by 'false' and simplify the code - and remove the
functions.
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/164549983742.9187.2570198746005819592.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nilfs]
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
inode_congested() reports if the backing-device for the inode is
congested. No bdi reports congestion any more, so this always returns
'false'.
So remove inode_congested() and related functions, and remove the call
sites, assuming that inode_congested() always returns 'false'.
Link: https://lkml.kernel.org/r/164549983741.9187.2174285592262191311.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This function already required a head page to be passed, so this
just adds type-safety and removes a few implicit calls to
compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
We always write out an entire folio at once. This conversion removes
a few calls to compound_head() and gets the NR_VMSCAN_WRITE statistic
right when writing out a large folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This function only has one caller, and it already has a folio. This
removes a number of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
The statistics we gather should count the number of pages, not the
number of folios. The logic in this function is somewhat convoluted,
but even if we split the folio, I think the accounting is now correct.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
A large folio which is smaller than a PMD does not need to do the extra
work in try_to_unmap() of trying to split a PMD entry.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
We have to allocate memory in order to split a file-backed folio, so
it's not a good idea to split them in the memory freeing path. It also
doesn't work for XFS because pages have an extra reference count from
page_has_private() and split_huge_page() expects that reference to have
already been removed. Unfortunately, we still have to split shmem THPs
because we can't handle swapping out an entire THP yet.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Change all three callers and the worker function try_to_unmap_one().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Both its callers pass a page which was previously on an LRU list,
so were passing a folio by definition. Use the type system to enforce
that and remove a few calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This is a convenience function; split_huge_page_to_list() can take
any page in a folio (and does so on purpose because that page will
be the one which keeps the refcount). But it's convenient for the
callers to pass the folio instead of the first page in the folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Saves a few calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add kernel-doc and return the number of pages removed in order to
get the statistics right in __invalidate_mapping_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
This removes a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add a putback_lru_page() wrapper. Removes a couple of compound_head()
calls.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This removes an assumption that THPs are the only kind of compound
pages and removes a couple of hidden calls to compound_head. It
also documents that you can't pass a tail page to mem_cgroup_swapout().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This removes an assumption that THPs are the only kind of compound
pages and removes a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add isolate_lru_page() as a wrapper around isolate_lru_folio().
TestClearPageLRU() would have always failed on a tail page, so
returning -EBUSY is the same behaviour.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
4.8 commit 7751b2da6be0 ("vmscan: split file huge pages before paging
them out") inserted a split_huge_page_to_list() into shrink_page_list()
without considering the mlock case: no problem if the page has already
been marked as Mlocked (the !page_evictable check much higher up will
have skipped all this), but it has always been the case that races or
omissions in setting Mlocked can rely on page reclaim to detect this
and correct it before actually reclaiming - and that remains so, but
what a shame if a hugepage is needlessly split before discovering it.
It is surprising that page_check_references() returns PAGEREF_RECLAIM
when VM_LOCKED, but there was a good reason for that: try_to_unmap_one()
is where the condition is detected and corrected; and until now it could
not be done in page_referenced_one(), because that does not always have
the page locked. Now that mlock's requirement for page lock has gone,
copy try_to_unmap_one()'s mlock restoration into page_referenced_one(),
and let page_check_references() return PAGEREF_ACTIVATE in this case.
But page_referenced_one() may find a pte mapping one part of a hugepage:
what hold should a pte mapped in a VM_LOCKED area exert over the entire
huge page? That's debatable. The approach taken here is to treat that
pte mapping in page_referenced_one() as if not VM_LOCKED, and if no
VM_LOCKED pmd mapping is found later in the walk, and lack of reference
permits, then PAGEREF_RECLAIM take it to attempted splitting as before.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
A soft lockup bug in kcompactd was reported in a private bugzilla with
the following visible in dmesg;
watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479]
watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479]
watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479]
watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479]
The machine had 256G of RAM with no swap and an earlier failed
allocation indicated that node 0 where kcompactd was run was potentially
unreclaimable;
Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB
inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB
mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp:
0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB
kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes
Vlastimil Babka investigated a crash dump and found that a task
migrating pages was trying to drain PCP lists;
PID: 52922 TASK: ffff969f820e5000 CPU: 19 COMMAND: "kworker/u128:3"
Call Trace:
__schedule
schedule
schedule_timeout
wait_for_completion
__flush_work
__drain_all_pages
__alloc_pages_slowpath.constprop.114
__alloc_pages
alloc_migration_target
migrate_pages
migrate_to_node
do_migrate_pages
cpuset_migrate_mm_workfn
process_one_work
worker_thread
kthread
ret_from_fork
This failure is specific to CONFIG_PREEMPT=n builds. The root of the
problem is that kcompact0 is not rescheduling on a CPU while a task that
has isolated a large number of the pages from the LRU is waiting on
kcompact0 to reschedule so the pages can be released. While
shrink_inactive_list() only loops once around too_many_isolated, reclaim
can continue without rescheduling if sc->skipped_deactivate == 1 which
could happen if there was no file LRU and the inactive anon list was not
low.
Link: https://lkml.kernel.org/r/20220203100326.GD3301@suse.de
Fixes: d818fca1cac3 ("mm/vmscan: throttle reclaim and compaction when too may pages are isolated")
Signed-off-by: Mel Gorman <mgorman@suse.de>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
drop_slab_node is only used in drop_slab. So remove it's declaration
from header file and add keyword static for it's definition.
Link: https://lkml.kernel.org/r/20211111062445.5236-1-ligang.bdlg@bytedance.com
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hugh Dickins reported the following
My tmpfs swapping load (tweaked to use huge pages more heavily
than in real life) is far from being a realistic load: but it was
notably slowed down by your throttling mods in 5.16-rc, and this
patch makes it well again - thanks.
But: it very quickly hit NULL pointer until I changed that last
line to
if (first_pgdat)
consider_reclaim_throttle(first_pgdat, sc);
The likely issue is that huge pages are a major component of the test
workload. When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check
if (IS_ENABLED(CONFIG_COMPACTION) &&
sc->order > PAGE_ALLOC_COSTLY_ORDER &&
compaction_ready(zone, sc)) {
sc->compaction_ready = true;
continue;
}
If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.
Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes: 1b4e3f26f9f75 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time. In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling. In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.
Commit 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca4a8b
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse. Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.
To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback. If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly. Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.
Alexey's original case was the most straight forward
for i in {1..3}; do tail /dev/zero; done
On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.
Alexey's second test case added watching a youtube video while tail runs
10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches. With this
patch applies, the video plays similarly to 5.15.
[lkp@intel.com: Fix W=1 build warning]
Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/
Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
|
|
Historically (pre-2.5), the inode shrinker used to reclaim only empty
inodes and skip over those that still contained page cache. This caused
problems on highmem hosts: struct inode could put fill lowmem zones
before the cache was getting reclaimed in the highmem zones.
To address this, the inode shrinker started to strip page cache to
facilitate reclaiming lowmem. However, this comes with its own set of
problems: the shrinkers may drop actively used page cache just because
the inodes are not currently open or dirty - think working with a large
git tree. It further doesn't respect cgroup memory protection settings
and can cause priority inversions between containers.
Nowadays, the page cache also holds non-resident info for evicted cache
pages in order to detect refaults. We've come to rely heavily on this
data inside reclaim for protecting the cache workingset and driving swap
behavior. We also use it to quantify and report workload health through
psi. The latter in turn is used for fleet health monitoring, as well as
driving automated memory sizing of workloads and containers, proactive
reclaim and memory offloading schemes.
The consequences of dropping page cache prematurely is that we're seeing
subtle and not-so-subtle failures in all of the above-mentioned
scenarios, with the workload generally entering unexpected thrashing
states while losing the ability to reliably detect it.
To fix this on non-highmem systems at least, going back to rotating
inodes on the LRU isn't feasible. We've tried (commit a76cf1a474d7
("mm: don't reclaim inodes with many attached pages")) and failed
(commit 69056ee6a8a3 ("Revert "mm: don't reclaim inodes with many
attached pages"")).
The issue is mostly that shrinker pools attract pressure based on their
size, and when objects get skipped the shrinkers remember this as
deferred reclaim work. This accumulates excessive pressure on the
remaining inodes, and we can quickly eat into heavily used ones, or
dirty ones that require IO to reclaim, when there potentially is plenty
of cold, clean cache around still.
Instead, this patch keeps populated inodes off the inode LRU in the
first place - just like an open file or dirty state would. An otherwise
clean and unused inode then gets queued when the last cache entry
disappears. This solves the problem without reintroducing the reclaim
issues, and generally is a bit more scalable than having to wade through
potentially hundreds of thousands of busy inodes.
Locking is a bit tricky because the locks protecting the inode state
(i_lock) and the inode LRU (lru_list.lock) don't nest inside the
irq-safe page cache lock (i_pages.xa_lock). Page cache deletions are
serialized through i_lock, taken before the i_pages lock, to make sure
depopulated inodes are queued reliably. Additions may race with
deletions, but we'll check again in the shrinker. If additions race
with the shrinker itself, we're protected by the i_lock: if find_inode()
or iput() win, the shrinker will bail on the elevated i_count or
I_REFERENCED; if the shrinker wins and goes ahead with the inode, it
will set I_FREEING and inhibit further igets(), which will cause the
other side to create a new instance of the inode instead.
Link: https://lkml.kernel.org/r/20210614211904.14420-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
|
|
Tracing indicates that tasks throttled on NOPROGRESS are woken
prematurely resulting in occasional massive spikes in direct reclaim
activity. This patch wakes tasks throttled on NOPROGRESS if reclaim
efficiency is at least 12%.
Link: https://lkml.kernel.org/r/20211022144651.19914-9-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Tracing of the stutterp workload showed the following delays
1 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=536000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=544000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=556000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=624000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=716000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usect_delayed=772000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usect_delayed=512000 reason=VMSCAN_THROTTLE_NOPROGRESS
16 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS
53 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS
116 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS
5907 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS
71741 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS
All the throttling hit the full timeout and then there was wakeup delays
meaning that the wakeups are premature as no other reclaimer such as
kswapd has made progress. This patch increases the maximum timeout.
Link: https://lkml.kernel.org/r/20211022144651.19914-8-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Neil Brown raised concerns about callers of reclaim_throttle specifying
a timeout value. The original timeout values to congestion_wait() were
probably pulled out of thin air or copy&pasted from somewhere else.
This patch centralises the timeout values and selects a timeout based on
the reason for reclaim throttling. These figures are also pulled out of
the same thin air but better values may be derived
Running a workload that is throttling for inappropriate periods and
tracing mm_vmscan_throttled can be used to pick a more appropriate
value. Excessive throttling would pick a lower timeout where as
excessive CPU usage in reclaim context would select a larger timeout.
Ideally a large value would always be used and the wakeups would occur
before a timeout but that requires careful testing.
Link: https://lkml.kernel.org/r/20211022144651.19914-7-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memcg reclaim throttles on congestion if no reclaim progress is made.
This makes little sense, it might be due to writeback or a host of other
factors.
For !memcg reclaim, it's messy. Direct reclaim primarily is throttled
in the page allocator if it is failing to make progress. Kswapd
throttles if too many pages are under writeback and marked for immediate
reclaim.
This patch explicitly throttles if reclaim is failing to make progress.
[vbabka@suse.cz: Remove redundant code]
Link: https://lkml.kernel.org/r/20211022144651.19914-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Page reclaim throttles on congestion if too many parallel reclaim
instances have isolated too many pages. This makes no sense, excessive
parallelisation has nothing to do with writeback or congestion.
This patch creates an additional workqueue to sleep on when too many
pages are isolated. The throttled tasks are woken when the number of
isolated pages is reduced or a timeout occurs. There may be some false
positive wakeups for GFP_NOIO/GFP_NOFS callers but the tasks will
throttle again if necessary.
[shy828301@gmail.com: Wake up from compaction context]
[vbabka@suse.cz: Account number of throttled tasks only for writeback]
Link: https://lkml.kernel.org/r/20211022144651.19914-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Remove dependency on congestion_wait in mm/", v5.
This series that removes all calls to congestion_wait in mm/ and deletes
wait_iff_congested. It's not a clever implementation but
congestion_wait has been broken for a long time [1].
Even if congestion throttling worked, it was never a great idea. While
excessive dirty/writeback pages at the tail of the LRU is one
possibility that reclaim may be slow, there is also the problem of too
many pages being isolated and reclaim failing for other reasons
(elevated references, too many pages isolated, excessive LRU contention
etc).
This series replaces the "congestion" throttling with 3 different types.
- If there are too many dirty/writeback pages, sleep until a timeout or
enough pages get cleaned
- If too many pages are isolated, sleep until enough isolated pages are
either reclaimed or put back on the LRU
- If no progress is being made, direct reclaim tasks sleep until
another task makes progress with acceptable efficiency.
This was initially tested with a mix of workloads that used to trigger
corner cases that no longer work. A new test case was created called
"stutterp" (pagereclaim-stutterp-noreaders in mmtests) using a freshly
created XFS filesystem. Note that it may be necessary to increase the
timeout of ssh if executing remotely as ssh itself can get throttled and
the connection may timeout.
stutterp varies the number of "worker" processes from 4 up to NR_CPUS*4
to check the impact as the number of direct reclaimers increase. It has
four types of worker.
- One "anon latency" worker creates small mappings with mmap() and
times how long it takes to fault the mapping reading it 4K at a time
- X file writers which is fio randomly writing X files where the total
size of the files add up to the allowed dirty_ratio. fio is allowed
to run for a warmup period to allow some file-backed pages to
accumulate. The duration of the warmup is based on the best-case
linear write speed of the storage.
- Y file readers which is fio randomly reading small files
- Z anon memory hogs which continually map (100-dirty_ratio)% of memory
- Total estimated WSS = (100+dirty_ration) percentage of memory
X+Y+Z+1 == NR_WORKERS varying from 4 up to NR_CPUS*4
The intent is to maximise the total WSS with a mix of file and anon
memory where some anonymous memory must be swapped and there is a high
likelihood of dirty/writeback pages reaching the end of the LRU.
The test can be configured to have no background readers to stress
dirty/writeback pages. The results below are based on having zero
readers.
The short summary of the results is that the series works and stalls
until some event occurs but the timeouts may need adjustment.
The test results are not broken down by patch as the series should be
treated as one block that replaces a broken throttling mechanism with a
working one.
Finally, three machines were tested but I'm reporting the worst set of
results. The other two machines had much better latencies for example.
First the results of the "anon latency" latency
stutterp
5.15.0-rc1 5.15.0-rc1
vanilla mm-reclaimcongest-v5r4
Amean mmap-4 31.4003 ( 0.00%) 2661.0198 (-8374.52%)
Amean mmap-7 38.1641 ( 0.00%) 149.2891 (-291.18%)
Amean mmap-12 60.0981 ( 0.00%) 187.8105 (-212.51%)
Amean mmap-21 161.2699 ( 0.00%) 213.9107 ( -32.64%)
Amean mmap-30 174.5589 ( 0.00%) 377.7548 (-116.41%)
Amean mmap-48 8106.8160 ( 0.00%) 1070.5616 ( 86.79%)
Stddev mmap-4 41.3455 ( 0.00%) 27573.9676 (-66591.66%)
Stddev mmap-7 53.5556 ( 0.00%) 4608.5860 (-8505.23%)
Stddev mmap-12 171.3897 ( 0.00%) 5559.4542 (-3143.75%)
Stddev mmap-21 1506.6752 ( 0.00%) 5746.2507 (-281.39%)
Stddev mmap-30 557.5806 ( 0.00%) 7678.1624 (-1277.05%)
Stddev mmap-48 61681.5718 ( 0.00%) 14507.2830 ( 76.48%)
Max-90 mmap-4 31.4243 ( 0.00%) 83.1457 (-164.59%)
Max-90 mmap-7 41.0410 ( 0.00%) 41.0720 ( -0.08%)
Max-90 mmap-12 66.5255 ( 0.00%) 53.9073 ( 18.97%)
Max-90 mmap-21 146.7479 ( 0.00%) 105.9540 ( 27.80%)
Max-90 mmap-30 193.9513 ( 0.00%) 64.3067 ( 66.84%)
Max-90 mmap-48 277.9137 ( 0.00%) 591.0594 (-112.68%)
Max mmap-4 1913.8009 ( 0.00%) 299623.9695 (-15555.96%)
Max mmap-7 2423.9665 ( 0.00%) 204453.1708 (-8334.65%)
Max mmap-12 6845.6573 ( 0.00%) 221090.3366 (-3129.64%)
Max mmap-21 56278.6508 ( 0.00%) 213877.3496 (-280.03%)
Max mmap-30 19716.2990 ( 0.00%) 216287.6229 (-997.00%)
Max mmap-48 477923.9400 ( 0.00%) 245414.8238 ( 48.65%)
For most thread counts, the time to mmap() is unfortunately increased.
In earlier versions of the series, this was lower but a large number of
throttling events were reaching their timeout increasing the amount of
inefficient scanning of the LRU. There is no prioritisation of reclaim
tasks making progress based on each tasks rate of page allocation versus
progress of reclaim. The variance is also impacted for high worker
counts but in all cases, the differences in latency are not
statistically significant due to very large maximum outliers. Max-90
shows that 90% of the stalls are comparable but the Max results show the
massive outliers which are increased to to stalling.
It is expected that this will be very machine dependant. Due to the
test design, reclaim is difficult so allocations stall and there are
variances depending on whether THPs can be allocated or not. The amount
of memory will affect exactly how bad the corner cases are and how often
they trigger. The warmup period calculation is not ideal as it's based
on linear writes where as fio is randomly writing multiple files from
multiple tasks so the start state of the test is variable. For example,
these are the latencies on a single-socket machine that had more memory
Amean mmap-4 42.2287 ( 0.00%) 49.6838 * -17.65%*
Amean mmap-7 216.4326 ( 0.00%) 47.4451 * 78.08%*
Amean mmap-12 2412.0588 ( 0.00%) 51.7497 ( 97.85%)
Amean mmap-21 5546.2548 ( 0.00%) 51.8862 ( 99.06%)
Amean mmap-30 1085.3121 ( 0.00%) 72.1004 ( 93.36%)
The overall system CPU usage and elapsed time is as follows
5.15.0-rc3 5.15.0-rc3
vanilla mm-reclaimcongest-v5r4
Duration User 6989.03 983.42
Duration System 7308.12 799.68
Duration Elapsed 2277.67 2092.98
The patches reduce system CPU usage by 89% as the vanilla kernel is rarely
stalling.
The high-level /proc/vmstats show
5.15.0-rc1 5.15.0-rc1
vanilla mm-reclaimcongest-v5r2
Ops Direct pages scanned 1056608451.00 503594991.00
Ops Kswapd pages scanned 109795048.00 147289810.00
Ops Kswapd pages reclaimed 63269243.00 31036005.00
Ops Direct pages reclaimed 10803973.00 6328887.00
Ops Kswapd efficiency % 57.62 21.07
Ops Kswapd velocity 48204.98 57572.86
Ops Direct efficiency % 1.02 1.26
Ops Direct velocity 463898.83 196845.97
Kswapd scanned less pages but the detailed pattern is different. The
vanilla kernel scans slowly over time where as the patches exhibits
burst patterns of scan activity. Direct reclaim scanning is reduced by
52% due to stalling.
The pattern for stealing pages is also slightly different. Both kernels
exhibit spikes but the vanilla kernel when reclaiming shows pages being
reclaimed over a period of time where as the patches tend to reclaim in
spikes. The difference is that vanilla is not throttling and instead
scanning constantly finding some pages over time where as the patched
kernel throttles and reclaims in spikes.
Ops Percentage direct scans 90.59 77.37
For direct reclaim, vanilla scanned 90.59% of pages where as with the
patches, 77.37% were direct reclaim due to throttling
Ops Page writes by reclaim 2613590.00 1687131.00
Page writes from reclaim context are reduced.
Ops Page writes anon 2932752.00 1917048.00
And there is less swapping.
Ops Page reclaim immediate 996248528.00 107664764.00
The number of pages encountered at the tail of the LRU tagged for
immediate reclaim but still dirty/writeback is reduced by 89%.
Ops Slabs scanned 164284.00 153608.00
Slab scan activity is similar.
ftrace was used to gather stall activity
Vanilla
-------
1 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=16000
2 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=12000
8 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=8000
29 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=4000
82394 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=0
The fast majority of wait_iff_congested calls do not stall at all. What
is likely happening is that cond_resched() reschedules the task for a
short period when the BDI is not registering congestion (which it never
will in this test setup).
1 writeback_congestion_wait: usec_timeout=100000 usec_delayed=120000
2 writeback_congestion_wait: usec_timeout=100000 usec_delayed=132000
4 writeback_congestion_wait: usec_timeout=100000 usec_delayed=112000
380 writeback_congestion_wait: usec_timeout=100000 usec_delayed=108000
778 writeback_congestion_wait: usec_timeout=100000 usec_delayed=104000
congestion_wait if called always exceeds the timeout as there is no
trigger to wake it up.
Bottom line: Vanilla will throttle but it's not effective.
Patch series
------------
Kswapd throttle activity was always due to scanning pages tagged for
immediate reclaim at the tail of the LRU
1 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
4 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
6 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
94 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
112 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK
The majority of events did not stall or stalled for a short period.
Roughly 16% of stalls reached the timeout before expiry. For direct
reclaim, the number of times stalled for each reason were
6624 reason=VMSCAN_THROTTLE_ISOLATED
93246 reason=VMSCAN_THROTTLE_NOPROGRESS
96934 reason=VMSCAN_THROTTLE_WRITEBACK
The most common reason to stall was due to excessive pages tagged for
immediate reclaim at the tail of the LRU followed by a failure to make
forward. A relatively small number were due to too many pages isolated
from the LRU by parallel threads
For VMSCAN_THROTTLE_ISOLATED, the breakdown of delays was
9 usec_timeout=20000 usect_delayed=4000 reason=VMSCAN_THROTTLE_ISOLATED
12 usec_timeout=20000 usect_delayed=16000 reason=VMSCAN_THROTTLE_ISOLATED
83 usec_timeout=20000 usect_delayed=20000 reason=VMSCAN_THROTTLE_ISOLATED
6520 usec_timeout=20000 usect_delayed=0 reason=VMSCAN_THROTTLE_ISOLATED
Most did not stall at all. A small number reached the timeout.
For VMSCAN_THROTTLE_NOPROGRESS, the breakdown of stalls were all over
the map
1 usec_timeout=500000 usect_delayed=324000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=332000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=348000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=360000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=228000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=260000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=340000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=364000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=372000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=428000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=460000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=464000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=244000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=252000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=272000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=188000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=268000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=328000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=380000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=392000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=432000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=204000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=220000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=412000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=436000 reason=VMSCAN_THROTTLE_NOPROGRESS
6 usec_timeout=500000 usect_delayed=488000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=212000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=300000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=316000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=472000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=248000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=356000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=456000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=376000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=484000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=172000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=420000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=452000 reason=VMSCAN_THROTTLE_NOPROGRESS
11 usec_timeout=500000 usect_delayed=256000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=144000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=152000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=264000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=384000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=424000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=492000 reason=VMSCAN_THROTTLE_NOPROGRESS
13 usec_timeout=500000 usect_delayed=184000 reason=VMSCAN_THROTTLE_NOPROGRESS
13 usec_timeout=500000 usect_delayed=444000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=308000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=440000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=476000 reason=VMSCAN_THROTTLE_NOPROGRESS
16 usec_timeout=500000 usect_delayed=140000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=232000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=240000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=280000 reason=VMSCAN_THROTTLE_NOPROGRESS
18 usec_timeout=500000 usect_delayed=404000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=148000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=216000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=468000 reason=VMSCAN_THROTTLE_NOPROGRESS
21 usec_timeout=500000 usect_delayed=448000 reason=VMSCAN_THROTTLE_NOPROGRESS
23 usec_timeout=500000 usect_delayed=168000 reason=VMSCAN_THROTTLE_NOPROGRESS
23 usec_timeout=500000 usect_delayed=296000 reason=VMSCAN_THROTTLE_NOPROGRESS
25 usec_timeout=500000 usect_delayed=132000 reason=VMSCAN_THROTTLE_NOPROGRESS
25 usec_timeout=500000 usect_delayed=352000 reason=VMSCAN_THROTTLE_NOPROGRESS
26 usec_timeout=500000 usect_delayed=180000 reason=VMSCAN_THROTTLE_NOPROGRESS
27 usec_timeout=500000 usect_delayed=284000 reason=VMSCAN_THROTTLE_NOPROGRESS
28 usec_timeout=500000 usect_delayed=164000 reason=VMSCAN_THROTTLE_NOPROGRESS
29 usec_timeout=500000 usect_delayed=136000 reason=VMSCAN_THROTTLE_NOPROGRESS
30 usec_timeout=500000 usect_delayed=200000 reason=VMSCAN_THROTTLE_NOPROGRESS
30 usec_timeout=500000 usect_delayed=400000 reason=VMSCAN_THROTTLE_NOPROGRESS
31 usec_timeout=500000 usect_delayed=196000 reason=VMSCAN_THROTTLE_NOPROGRESS
32 usec_timeout=500000 usect_delayed=156000 reason=VMSCAN_THROTTLE_NOPROGRESS
33 usec_timeout=500000 usect_delayed=224000 reason=VMSCAN_THROTTLE_NOPROGRESS
35 usec_timeout=500000 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS
35 usec_timeout=500000 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS
36 usec_timeout=500000 usect_delayed=368000 reason=VMSCAN_THROTTLE_NOPROGRESS
36 usec_timeout=500000 usect_delayed=496000 reason=VMSCAN_THROTTLE_NOPROGRESS
37 usec_timeout=500000 usect_delayed=312000 reason=VMSCAN_THROTTLE_NOPROGRESS
38 usec_timeout=500000 usect_delayed=304000 reason=VMSCAN_THROTTLE_NOPROGRESS
40 usec_timeout=500000 usect_delayed=288000 reason=VMSCAN_THROTTLE_NOPROGRESS
43 usec_timeout=500000 usect_delayed=408000 reason=VMSCAN_THROTTLE_NOPROGRESS
55 usec_timeout=500000 usect_delayed=416000 reason=VMSCAN_THROTTLE_NOPROGRESS
56 usec_timeout=500000 usect_delayed=76000 reason=VMSCAN_THROTTLE_NOPROGRESS
58 usec_timeout=500000 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS
59 usec_timeout=500000 usect_delayed=208000 reason=VMSCAN_THROTTLE_NOPROGRESS
61 usec_timeout=500000 usect_delayed=68000 reason=VMSCAN_THROTTLE_NOPROGRESS
71 usec_timeout=500000 usect_delayed=192000 reason=VMSCAN_THROTTLE_NOPROGRESS
71 usec_timeout=500000 usect_delayed=480000 reason=VMSCAN_THROTTLE_NOPROGRESS
79 usec_timeout=500000 usect_delayed=60000 reason=VMSCAN_THROTTLE_NOPROGRESS
82 usec_timeout=500000 usect_delayed=320000 reason=VMSCAN_THROTTLE_NOPROGRESS
82 usec_timeout=500000 usect_delayed=92000 reason=VMSCAN_THROTTLE_NOPROGRESS
85 usec_timeout=500000 usect_delayed=64000 reason=VMSCAN_THROTTLE_NOPROGRESS
85 usec_timeout=500000 usect_delayed=80000 reason=VMSCAN_THROTTLE_NOPROGRESS
88 usec_timeout=500000 usect_delayed=84000 reason=VMSCAN_THROTTLE_NOPROGRESS
90 usec_timeout=500000 usect_delayed=160000 reason=VMSCAN_THROTTLE_NOPROGRESS
90 usec_timeout=500000 usect_delayed=292000 reason=VMSCAN_THROTTLE_NOPROGRESS
94 usec_timeout=500000 usect_delayed=56000 reason=VMSCAN_THROTTLE_NOPROGRESS
118 usec_timeout=500000 usect_delayed=88000 reason=VMSCAN_THROTTLE_NOPROGRESS
119 usec_timeout=500000 usect_delayed=72000 reason=VMSCAN_THROTTLE_NOPROGRESS
126 usec_timeout=500000 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS
146 usec_timeout=500000 usect_delayed=52000 reason=VMSCAN_THROTTLE_NOPROGRESS
148 usec_timeout=500000 usect_delayed=36000 reason=VMSCAN_THROTTLE_NOPROGRESS
148 usec_timeout=500000 usect_delayed=48000 reason=VMSCAN_THROTTLE_NOPROGRESS
159 usec_timeout=500000 usect_delayed=28000 reason=VMSCAN_THROTTLE_NOPROGRESS
178 usec_timeout=500000 usect_delayed=44000 reason=VMSCAN_THROTTLE_NOPROGRESS
183 usec_timeout=500000 usect_delayed=40000 reason=VMSCAN_THROTTLE_NOPROGRESS
237 usec_timeout=500000 usect_delayed=100000 reason=VMSCAN_THROTTLE_NOPROGRESS
266 usec_timeout=500000 usect_delayed=32000 reason=VMSCAN_THROTTLE_NOPROGRESS
313 usec_timeout=500000 usect_delayed=24000 reason=VMSCAN_THROTTLE_NOPROGRESS
347 usec_timeout=500000 usect_delayed=96000 reason=VMSCAN_THROTTLE_NOPROGRESS
470 usec_timeout=500000 usect_delayed=20000 reason=VMSCAN_THROTTLE_NOPROGRESS
559 usec_timeout=500000 usect_delayed=16000 reason=VMSCAN_THROTTLE_NOPROGRESS
964 usec_timeout=500000 usect_delayed=12000 reason=VMSCAN_THROTTLE_NOPROGRESS
2001 usec_timeout=500000 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS
2447 usec_timeout=500000 usect_delayed=8000 reason=VMSCAN_THROTTLE_NOPROGRESS
7888 usec_timeout=500000 usect_delayed=4000 reason=VMSCAN_THROTTLE_NOPROGRESS
22727 usec_timeout=500000 usect_delayed=0 reason=VMSCAN_THROTTLE_NOPROGRESS
51305 usec_timeout=500000 usect_delayed=500000 reason=VMSCAN_THROTTLE_NOPROGRESS
The full timeout is often hit but a large number also do not stall at
all. The remainder slept a little allowing other reclaim tasks to make
progress.
While this timeout could be further increased, it could also negatively
impact worst-case behaviour when there is no prioritisation of what task
should make progress.
For VMSCAN_THROTTLE_WRITEBACK, the breakdown was
1 usec_timeout=100000 usect_delayed=44000 reason=VMSCAN_THROTTLE_WRITEBACK
2 usec_timeout=100000 usect_delayed=76000 reason=VMSCAN_THROTTLE_WRITEBACK
3 usec_timeout=100000 usect_delayed=80000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=48000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=84000 reason=VMSCAN_THROTTLE_WRITEBACK
6 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
7 usec_timeout=100000 usect_delayed=88000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=56000 reason=VMSCAN_THROTTLE_WRITEBACK
12 usec_timeout=100000 usect_delayed=64000 reason=VMSCAN_THROTTLE_WRITEBACK
16 usec_timeout=100000 usect_delayed=92000 reason=VMSCAN_THROTTLE_WRITEBACK
24 usec_timeout=100000 usect_delayed=68000 reason=VMSCAN_THROTTLE_WRITEBACK
28 usec_timeout=100000 usect_delayed=32000 reason=VMSCAN_THROTTLE_WRITEBACK
30 usec_timeout=100000 usect_delayed=60000 reason=VMSCAN_THROTTLE_WRITEBACK
30 usec_timeout=100000 usect_delayed=96000 reason=VMSCAN_THROTTLE_WRITEBACK
32 usec_timeout=100000 usect_delayed=52000 reason=VMSCAN_THROTTLE_WRITEBACK
42 usec_timeout=100000 usect_delayed=40000 reason=VMSCAN_THROTTLE_WRITEBACK
77 usec_timeout=100000 usect_delayed=28000 reason=VMSCAN_THROTTLE_WRITEBACK
99 usec_timeout=100000 usect_delayed=36000 reason=VMSCAN_THROTTLE_WRITEBACK
137 usec_timeout=100000 usect_delayed=24000 reason=VMSCAN_THROTTLE_WRITEBACK
190 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
339 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
518 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
852 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
3359 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK
7147 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
83962 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK
The majority hit the timeout in direct reclaim context although a
sizable number did not stall at all. This is very different to kswapd
where only a tiny percentage of stalls due to writeback reached the
timeout.
Bottom line, the throttling appears to work and the wakeup events may
limit worst case stalls. There might be some grounds for adjusting
timeouts but it's likely futile as the worst-case scenarios depend on
the workload, memory size and the speed of the storage. A better
approach to improve the series further would be to prioritise tasks
based on their rate of allocation with the caveat that it may be very
expensive to track.
This patch (of 5):
Page reclaim throttles on wait_iff_congested under the following
conditions:
- kswapd is encountering pages under writeback and marked for immediate
reclaim implying that pages are cycling through the LRU faster than
pages can be cleaned.
- Direct reclaim will stall if all dirty pages are backed by congested
inodes.
wait_iff_congested is almost completely broken with few exceptions.
This patch adds a new node-based workqueue and tracks the number of
throttled tasks and pages written back since throttling started. If
enough pages belonging to the node are written back then the throttled
tasks will wake early. If not, the throttled tasks sleeps until the
timeout expires.
[neilb@suse.de: Uninterruptible sleep and simpler wakeups]
[hdanton@sina.com: Avoid race when reclaim starts]
[vbabka@suse.cz: vmstat irq-safe api, clarifications]
Link: https://lore.kernel.org/linux-mm/45d8b7a6-8548-65f5-cccf-9f451d4ae3d4@kernel.dk/ [1]
Link: https://lkml.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20211022144651.19914-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We fix the following warning when building kernel with W=1:
mm/vmscan.c:1362:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
Link: https://lkml.kernel.org/r/20210924181218.21165-1-songkai01@inspur.com
Signed-off-by: Kai Song <songkai01@inspur.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm updates from Dave Airlie:
"Summary below. i915 starts to add support for DG2 GPUs, enables DG1
and ADL-S support by default, lots of work to enable DisplayPort 2.0
across drivers. Lots of documentation updates and fixes across the
board.
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB"
* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
drm/amd/display: MST support for DPIA
drm/amdgpu: Fix even more out of bound writes from debugfs
drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
drm/amdgpu/UAPI: rearrange header to better align related items
drm/amd/display: Enable dpia in dmub only for DCN31 B0
drm/amd/display: Fix USB4 hot plug crash issue
drm/amd/display: Fix deadlock when falling back to v2 from v3
drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
drm/amd/display: move FPU associated DCN301 code to DML folder
drm/amd/display: fix link training regression for 1 or 2 lane
drm/amd/display: add two lane settings training options
drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
drm/amd/display: implement decide lane settings
drm/amd/display: adopt DP2.0 LT SCR revision 8
drm/amd/display: FEC configuration for dpia links in MST mode
drm/amd/display: FEC configuration for dpia links
drm/amd/display: Add workaround flag for EDID read on certain docks
drm/amd/display: Set phy_mux_sel bit in dmub scratch register
...
|
|
These are the folio equivalents of relock_page_lruvec_irq() and
folio_lruvec_relock_irqsave(). Also convert page_matches_lruvec()
to folio_matches_lruvec().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
These are the folio equivalents of lock_page_lruvec() and similar
functions. Also convert lruvec_memcg_debug() to take a folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Kickstart new drm-misc-next cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Commit f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to
proportional memory.low reclaim") introduced a divide by zero corner
case when oomd is being used in combination with cgroup memory.low
protection.
When oomd decides to kill a cgroup, it will force the cgroup memory to
be reclaimed after killing the tasks, by writing to the memory.max file
for that cgroup, forcing the remaining page cache and reclaimable slab
to be reclaimed down to zero.
Previously, on cgroups with some memory.low protection that would result
in the memory being reclaimed down to the memory.low limit, or likely
not at all, having the page cache reclaimed asynchronously later.
With f56ce412a59d the oomd write to memory.max tries to reclaim all the
way down to zero, which may race with another reclaimer, to the point of
ending up with the divide by zero below.
This patch implements the obvious fix.
Link: https://lkml.kernel.org/r/20210826220149.058089c6@imladris.surriel.com
Fixes: f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim")
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
drop_slab_node() is called as part of echo 2>/proc/sys/vm/drop_caches
operation. It iterates over all memcgs and calls shrink_slab() which in
turn iterates over all slab shrinkers. Freed objects are counted and as
long as the total number of freed objects from all memcgs and shrinkers is
higher than 10, drop_slab_node() loops for another full memcgs*shrinkers
iteration.
This arbitrary constant threshold of 10 can result in effectively an
infinite loop on a system with large number of memcgs and/or parallel
activity that allocates new objects. This has been reported previously by
Chunxin Zang [1] and recently by our customer.
The previous report [1] has resulted in commit 069c411de40a ("mm/vmscan:
fix infinite loop in drop_slab_node") which added a check for signals
allowing the user to terminate the command writing to drop_caches. At the
time it was also considered to make the threshold grow with each iteration
to guarantee termination, but such patch hasn't been formally proposed
yet.
This patch implements the dynamically growing threshold. At first
iteration it's enough to free one object to continue, and this threshold
effectively doubles with each iteration. Our customer's feedback was
positive.
There is always a risk that this change will result on some system in a
previously terminating drop_caches operation to terminate sooner and free
fewer objects. Ideally the semantics would guarantee freeing all freeable
objects that existed at the moment of starting the operation, while not
looping forever for newly allocated objects, but that's not feasible to
track. In the less ideal solution based on thresholds, arguably the
termination guarantee is more important than the exhaustiveness guarantee.
If there are reports of large regression wrt being exhaustive, we can
tune how fast the threshold grows.
[1] https://lore.kernel.org/lkml/20200909152047.27905-1-zangchunxin@bytedance.com/T/#u
[vbabka@suse.cz: avoid undefined shift behaviour]
Link: https://lkml.kernel.org/r/2f034e6f-a753-550a-f374-e4e23899d3d5@suse.cz
Link: https://lkml.kernel.org/r/20210818152239.25502-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Chunxin Zang <zangchunxin@bytedance.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We could add 'else' to remove the somewhat odd check_pending label to make
code core succinct.
Link: https://lkml.kernel.org/r/20210717065911.61497-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The return value of kswapd_run() is unused now. Clean it up.
Link: https://lkml.kernel.org/r/20210717065911.61497-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The priority field of sc is used to control how many pages we should scan
at once while we always traverse the list to shrink the pages in these
functions. So these settings are unneeded and misleading.
Link: https://lkml.kernel.org/r/20210717065911.61497-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Cleanups for vmscan", v2.
This series contains cleanups to remove unneeded return value, misleading
setting and so on. Also this remove the PageDirty check after MADV_FREE
pages are page_ref_freezed. More details can be found in the respective
changelogs.
This patch (of 4):
If the MADV_FREE pages are redirtied before they could be reclaimed, put
the pages back to anonymous LRU list by setting SwapBacked flag and the
pages will be reclaimed in normal swapout way. But as Yu Zhao pointed
out, "The page has only one reference left, which is from the isolation.
After the caller puts the page back on lru and drops the reference, the
page will be freed anyway. It doesn't matter which lru it goes." So we
don't bother checking PageDirty here.
[Yu Zhao's comment is also quoted in the code.]
Link: https://lkml.kernel.org/r/20210717065911.61497-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210717065911.61497-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some method is obviously needed to enable reclaim-based migration.
Just like traditional autonuma, there will be some workloads that will
benefit like workloads with more "static" configurations where hot pages
stay hot and cold pages stay cold. If pages come and go from the hot and
cold sets, the benefits of this approach will be more limited.
The benefits are truly workload-based and *not* hardware-based. We do not
believe that there is a viable threshold where certain hardware
configurations should have this mechanism enabled while others do not.
To be conservative, earlier work defaulted to disable reclaim- based
migration and did not include a mechanism to enable it. This proposes add
a new sysfs file
/sys/kernel/mm/numa/demotion_enabled
as a method to enable it.
We are open to any alternative that allows end users to enable this
mechanism or disable it if workload harm is detected (just like
traditional autonuma).
Once this is enabled page demotion may move data to a NUMA node that does
not fall into the cpuset of the allocating process. This could be
construed to violate the guarantees of cpusets. However, since this is an
opt-in mechanism, the assumption is that anyone enabling it is content to
relax the guarantees.
Link: https://lkml.kernel.org/r/20210721063926.3024591-9-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-10-ying.huang@intel.com
Signed-off-by: Huang Ying <ying.huang@intel.com>
Originally-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Global reclaim aims to reduce the amount of memory used on a given node or
set of nodes. Migrating pages to another node serves this purpose.
memcg reclaim is different. Its goal is to reduce the total memory
consumption of the entire memcg, across all nodes. Migration does not
assist memcg reclaim because it just moves page contents between nodes
rather than actually reducing memory consumption.
Link: https://lkml.kernel.org/r/20210715055145.195411-9-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
