| Age | Commit message (Collapse) | Author |
|---|
|
Let's simply work on the folio directly and remove the helpers.
Link: https://lkml.kernel.org/r/20230821160849.531668-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
This patch is based on the commit 5da226dbfce3("mm: skip CMA pages when
they are not available") which skips cma pages reclaim when they are not
eligible for the current allocation context. In mglru, such pages are
added to the tail of the immediate generation to maintain better LRU
order, which is unlike the case of conventional LRU where such pages are
directly added to the head of the LRU list(akin to adding to head of the
youngest generation in mglru).
No observable issue without this patch on MGLRU, but logically it make
sense to skip the CMA page reclaim when those pages can't be satisfied for
the current allocation context.
Link: https://lkml.kernel.org/r/1691568344-13475-1-git-send-email-quic_charante@quicinc.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
walk->can_swap might be invalid since it's not guaranteed to be
initialized for the particular lruvec. Instead deduce it from the folio
type (anon/file).
Link: https://lkml.kernel.org/r/20230802025606.346758-3-kaleshsingh@google.com
Fixes: 018ee47f1489 ("mm: multi-gen LRU: exploit locality in rmap")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek]
Tested-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Steven Barrett <steven@liquorix.net>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
inc_max_seq() will try to inc_min_seq() if nr_gens == MAX_NR_GENS. This
is because the generations are reused (the last oldest now empty
generation will become the next youngest generation).
inc_min_seq() is retried until successful, dropping the lru_lock
and yielding the CPU on each failure, and retaking the lock before
trying again:
while (!inc_min_seq(lruvec, type, can_swap)) {
spin_unlock_irq(&lruvec->lru_lock);
cond_resched();
spin_lock_irq(&lruvec->lru_lock);
}
However, the initial condition that required incrementing the min_seq
(nr_gens == MAX_NR_GENS) is not retested. This can change by another
call to inc_max_seq() from run_aging() with force_scan=true from the
debugfs interface.
Since the eviction stalls when the nr_gens == MIN_NR_GENS, avoid
unnecessarily incrementing the min_seq by rechecking the number of
generations before each attempt.
This issue was uncovered in previous discussion on the list by Yu Zhao
and Aneesh Kumar [1].
[1] https://lore.kernel.org/linux-mm/CAOUHufbO7CaVm=xjEb1avDhHVvnC8pJmGyKcFf2iY_dpf+zR3w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230802025606.346758-2-kaleshsingh@google.com
Fixes: d6c3af7d8a2b ("mm: multi-gen LRU: debugfs interface")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek]
Tested-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Steven Barrett <steven@liquorix.net>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MGLRU has a LRU list for each zone for each type (anon/file) in each
generation:
long nr_pages[MAX_NR_GENS][ANON_AND_FILE][MAX_NR_ZONES];
The min_seq (oldest generation) can progress independently for each
type but the max_seq (youngest generation) is shared for both anon and
file. This is to maintain a common frame of reference.
In order for eviction to advance the min_seq of a type, all the per-zone
lists in the oldest generation of that type must be empty.
The eviction logic only considers pages from eligible zones for
eviction or promotion.
scan_folios() {
...
for (zone = sc->reclaim_idx; zone >= 0; zone--) {
...
sort_folio(); // Promote
...
isolate_folio(); // Evict
}
...
}
Consider the system has the movable zone configured and default 4
generations. The current state of the system is as shown below
(only illustrating one type for simplicity):
Type: ANON
Zone DMA32 Normal Movable Device
Gen 0 0 0 4GB 0
Gen 1 0 1GB 1MB 0
Gen 2 1MB 4GB 1MB 0
Gen 3 1MB 1MB 1MB 0
Now consider there is a GFP_KERNEL allocation request (eligible zone
index <= Normal), evict_folios() will return without doing any work
since there are no pages to scan in the eligible zones of the oldest
generation. Reclaim won't make progress until triggered from a ZONE_MOVABLE
allocation request; which may not happen soon if there is a lot of free
memory in the movable zone. This can lead to OOM kills, although there
is 1GB pages in the Normal zone of Gen 1 that we have not yet tried to
reclaim.
This issue is not seen in the conventional active/inactive LRU since
there are no per-zone lists.
If there are no (not enough) folios to scan in the eligible zones, move
folios from ineligible zone (zone_index > reclaim_index) to the next
generation. This allows for the progression of min_seq and reclaiming
from the next generation (Gen 1).
Qualcomm, Mediatek and raspberrypi [1] discovered this issue independently.
[1] https://github.com/raspberrypi/linux/issues/5395
Link: https://lkml.kernel.org/r/20230802025606.346758-1-kaleshsingh@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek]
Tested-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Steven Barrett <steven@liquorix.net>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a memcg is in the process of being released mem_cgroup_tryget will
fail because its reference count has already reached 0. This can happen
during reclaim if the memcg has already been offlined, and we reclaim all
remaining pages attributed to the offlined memcg. shrink_many attempts to
skip the empty memcg in this case, and continue reclaiming from the
remaining memcgs in the old generation. If there is only one memcg
remaining, or if all remaining memcgs are in the process of being released
then shrink_many will spin until all memcgs have finished being released.
The release occurs through a workqueue, so it can take a while before
kswapd is able to make any further progress.
This fix results in reductions in kswapd activity and direct reclaim in
a test where 28 apps (working set size > total memory) are repeatedly
launched in a random sequence:
A B delta ratio(%)
allocstall_movable 5962 3539 -2423 -40.64
allocstall_normal 2661 2417 -244 -9.17
kswapd_high_wmark_hit_quickly 53152 7594 -45558 -85.71
pageoutrun 57365 11750 -45615 -79.52
Link: https://lkml.kernel.org/r/20230814151636.1639123-1-tjmercier@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.
The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.
A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.
Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Suggested-by: Jann Horn <jannh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm, netfs, fscache: Stop read optimisation when folio
removed from pagecache", v7.
This fixes an optimisation in fscache whereby we don't read from the cache
for a particular file until we know that there's data there that we don't
have in the pagecache. The problem is that I'm no longer using PG_fscache
(aka PG_private_2) to indicate that the page is cached and so I don't get
a notification when a cached page is dropped from the pagecache.
The first patch merges some folio_has_private() and
filemap_release_folio() pairs and introduces a helper,
folio_needs_release(), to indicate if a release is required.
The second patch is the actual fix. Following Willy's suggestions[1], it
adds an AS_RELEASE_ALWAYS flag to an address_space that will make
filemap_release_folio() always call ->release_folio(), even if
PG_private/PG_private_2 aren't set. folio_needs_release() is altered to
add a check for this.
This patch (of 2):
Make filemap_release_folio() check folio_has_private(). Then, in most
cases, where a call to folio_has_private() is immediately followed by a
call to filemap_release_folio(), we can get rid of the test in the pair.
There are a couple of sites in mm/vscan.c that this can't so easily be
done. In shrink_folio_list(), there are actually three cases (something
different is done for incompletely invalidated buffers), but
filemap_release_folio() elides two of them.
In shrink_active_list(), we don't have have the folio lock yet, so the
check allows us to avoid locking the page unnecessarily.
A wrapper function to check if a folio needs release is provided for those
places that still need to do it in the mm/ directory. This will acquire
additional parts to the condition in a future patch.
After this, the only remaining caller of folio_has_private() outside of
mm/ is a check in fuse.
Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com
Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.com
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When memory.reclaim was introduced, it became the first case where
cgroup_reclaim() is true for the root cgroup. Johannes concluded [1] that
for most cases this is okay, except for one case. Historically, kswapd
would throttle reclaim on a node if a lot of pages marked for reclaim are
under writeback (aka the node is congested). This occurred by setting
LRUVEC_CONGESTED bit in lruvec->flags. The bit would be cleared when the
node is balanced.
Similarly, cgroup reclaim would set the same bit when an lruvec is
congested, and clear it on the way out of reclaim (to throttle local
reclaimers).
Before the introduction of memory.reclaim, the root memcg was the only
target of kswapd reclaim, and non-root memcgs were the only targets of
cgroup reclaim, so they would never interfere. Using the same bit for
both was fine. After memory.reclaim, it is possible for cgroup reclaim on
the root cgroup to clear the bit set by kswapd. This would result in
reclaim on the node to be unthrottled before the node is balanced.
Fix this by introducing separate bits for cgroup-level and node-level
congestion. kswapd can unthrottle an lruvec that is marked as congested
by cgroup reclaim (as the entire node should no longer be congested), but
not vice versa (to prevent premature unthrottling before the entire node
is balanced).
[1]https://lore.kernel.org/lkml/20230405200150.GA35884@cmpxchg.org/
Link: https://lkml.kernel.org/r/20230621023101.432780-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Closes: https://lore.kernel.org/lkml/20230405200150.GA35884@cmpxchg.org/
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Evidently, global_reclaim() can be a confusing name. Especially that it
used to exist before with a subtly different definition (removed by commit
b5ead35e7e1d ("mm: vmscan: naming fixes: global_reclaim() and
sane_reclaim()"). It can be interpreted as non-cgroup reclaim, even
though it returns true for cgroup reclaim on the root memcg (through
memory.reclaim).
Rename it to root_reclaim() in an attempt to make it less ambiguous, and
add documentation to it as well as cgroup_reclaim.
Link: https://lkml.kernel.org/r/20230621023053.432374-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Closes: https://lore.kernel.org/lkml/20230405200150.GA35884@cmpxchg.org/
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers have now been converted to call
check_move_unevictable_folios().
Link: https://lkml.kernel.org/r/20230621164557.3510324-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
lru_gen_rotate_memcg() can happen in softirq if memory.soft_limit_in_bytes
is set. This requires memcg_lru->lock to be irq safe. Lockdep warns on
this.
This problem only affects memcg v1.
Link: https://lkml.kernel.org/r/20230619193821.2710944-1-yuzhao@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: syzbot+87c490fd2be656269b6a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=87c490fd2be656269b6a
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MGLRU's walk_pte_range() use the safer pte_offset_map_nolock(), rather
than pte_lockptr(), to get the ptl for its trylock. Just return false and
move on to next extent if it fails, like when the trylock fails. Remove
the VM_WARN_ON_ONCE(pmd_leaf) since that will happen, rarely.
Link: https://lkml.kernel.org/r/51ece73e-7398-2e4a-2384-56708c87844f@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add __meminit to kswapd_run() and kswapd_stop() to ensure they're default
to __init when memory hotplug is not enabled.
Link: https://lkml.kernel.org/r/20230606121813.242163-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch fixes unproductive reclaiming of CMA pages by skipping them
when they are not available for current context. It arises from the below
OOM issue, which was caused by a large proportion of MIGRATE_CMA pages
among free pages.
[ 36.172486] [03-19 10:05:52.172] ActivityManager: page allocation failure: order:0, mode:0xc00(GFP_NOIO), nodemask=(null),cpuset=foreground,mems_allowed=0
[ 36.189447] [03-19 10:05:52.189] DMA32: 0*4kB 447*8kB (C) 217*16kB (C) 124*32kB (C) 136*64kB (C) 70*128kB (C) 22*256kB (C) 3*512kB (C) 0*1024kB 0*2048kB 0*4096kB = 35848kB
[ 36.193125] [03-19 10:05:52.193] Normal: 231*4kB (UMEH) 49*8kB (MEH) 14*16kB (H) 13*32kB (H) 8*64kB (H) 2*128kB (H) 0*256kB 1*512kB (H) 0*1024kB 0*2048kB 0*4096kB = 3236kB
...
[ 36.234447] [03-19 10:05:52.234] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
[ 36.234455] [03-19 10:05:52.234] cache: ext4_io_end, object size: 64, buffer size: 64, default order: 0, min order: 0
[ 36.234459] [03-19 10:05:52.234] node 0: slabs: 53,objs: 3392, free: 0
This change further decreases the chance for wrong OOMs in the presence
of a lot of CMA memory.
[david@redhat.com: changelog addition]
Link: https://lkml.kernel.org/r/1685501461-19290-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: ke.wang <ke.wang@unisoc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit f95bdb700bc6bb74e1199b1f5f90c613e152cfa7.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-8-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit caa05325c9126c77ebf114edce51536a0d0a9a08.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-7-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 475733dda5aedba9e086379aafe6b5ffd53e8f5e.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink. So revert the
shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-6-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit b3cabea3c9153fd42fe5cb851ac58b51ea2b32b8.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be careful
to not frequently check for SRCU read-side critical section exits. Therefore,
even if no one is currently in the SRCU read-side critical section,
synchronize_srcu() cannot return quickly. That's why unregister_shrinker()
has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner
to continue to re-implement the lockless slab shrink. Because there will
be other readers after reverting the shrinker_srcu related changes, so
it is better to restore to hold read lock to reparent shrinker nr_deferred.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-4-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 1643db98d9b314e0a592d152603094fbf7ab906e.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink. So we still need
shrinker_rwsem in synchronize_shrinkers() after reverting the
shrinker_srcu related changes.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-3-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "revert shrinker_srcu related changes".
This patch (of 7):
This reverts commit cf2e309ebca7bb0916771839f9b580b06c778530.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
After discussion, we will try to use the refcount+RCU method [2] proposed
by Dave Chinner to continue to re-implement the lockless slab shrink. So
revert the shrinker_mutex back to shrinker_rwsem first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-1-qi.zheng@linux.dev
Link: https://lkml.kernel.org/r/20230609081518.3039120-2-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A customer provided evidence indicating that a process
was stalled in direct reclaim:
- The process was trapped in throttle_direct_reclaim().
The function wait_event_killable() was called to wait condition
allow_direct_reclaim(pgdat) for current node to be true.
The allow_direct_reclaim(pgdat) examined the number of free pages
on the node by zone_page_state() which just returns value in
zone->vm_stat[NR_FREE_PAGES].
- On node #1, zone->vm_stat[NR_FREE_PAGES] was 0.
However, the freelist on this node was not empty.
- This inconsistent of vmstat value was caused by percpu vmstat on
nohz_full cpus. Every increment/decrement of vmstat is performed
on percpu vmstat counter at first, then pooled diffs are cumulated
to the zone's vmstat counter in timely manner. However, on nohz_full
cpus (in case of this customer's system, 48 of 52 cpus) these pooled
diffs were not cumulated once the cpu had no event on it so that
the cpu started sleeping infinitely.
I checked percpu vmstat and found there were total 69 counts not
cumulated to the zone's vmstat counter yet.
- In this situation, kswapd did not help the trapped process.
In pgdat_balanced(), zone_wakermark_ok_safe() examined the number
of free pages on the node by zone_page_state_snapshot() which
checks pending counts on percpu vmstat.
Therefore kswapd could know there were 69 free pages correctly.
Since zone->_watermark = {8, 20, 32}, kswapd did not work because
69 was greater than 32 as high watermark.
Change allow_direct_reclaim to use zone_page_state_snapshot, which
allows a more precise version of the vmstat counters to be used.
allow_direct_reclaim will only be called from try_to_free_pages,
which is not a hot path.
Testing: Due to difficulties accessing the system, it has not been
possible for the reproducer to test the patch (however its
clear from available data and analysis that it should fix it).
Link: https://lkml.kernel.org/r/20230530145335.677325196@redhat.com
Reviewed-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On Android app cycle workloads, MGLRU showed a significant reduction in
workingset refaults although pgpgin/pswpin remained relatively unchanged.
This indicated MGLRU may be undercounting workingset refaults.
This has impact on userspace programs, like Android's LMKD, that monitor
workingset refault statistics to detect thrashing.
It was found that refaults were only accounted if the MGLRU shadow entry
was for a recently evicted folio. However, recently evicted folios should
be accounted as workingset activation, and refaults should be accounted
regardless of recency.
Fix MGLRU's workingset refault and activation accounting to more closely
match that of the conventional active/inactive LRU.
Link: https://lkml.kernel.org/r/20230523205922.3852731-1-kaleshsingh@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add helpers to page table walking code:
- Clarifies intent via name "should_walk_mmu" and "should_clear_pmd_young"
- Avoids repeating same logic in two places
Link: https://lkml.kernel.org/r/20230522112058.2965866-3-talumbau@google.com
Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
Reviewed-by: Yuanchu Xie <yuanchu@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
lru_gen_soft_reclaim() gets the lruvec from the memcg and node ID to keep a
cleaner interface on the caller side.
Link: https://lkml.kernel.org/r/20230522112058.2965866-2-talumbau@google.com
Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
Reviewed-by: Yuanchu Xie <yuanchu@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use DECLARE_BITMAP macro when possible.
Link: https://lkml.kernel.org/r/20230522112058.2965866-1-talumbau@google.com
Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yuanchu Xie <yuanchu@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since it only returns COMPACT_CONTINUE or COMPACT_SKIPPED now, a bool
return value simplifies the callsites.
Link: https://lkml.kernel.org/r/20230602151204.GD161817@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove from all paths not reachable via /proc/sys/vm/compact_memory.
Link: https://lkml.kernel.org/r/20230519123959.77335-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__compaction_suitable() is supposed to check for available migration
targets. However, it also checks whether the operation was requested via
/proc/sys/vm/compact_memory, and whether the original allocation request
can already succeed. These don't apply to all callsites.
Move the checks out to the callers, so that later patches can deal with
them one by one. No functional change intended.
[hannes@cmpxchg.org: fix comment, per Vlastimil]
Link: https://lkml.kernel.org/r/20230602144942.GC161817@cmpxchg.org
Link: https://lkml.kernel.org/r/20230519123959.77335-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Almost all of the callers & implementors of migrate_pages() were already
converted to use folios. compaction_alloc() & compaction_free() are
trivial to convert a part of this patch and not worth splitting out.
Link: https://lkml.kernel.org/r/20230513001101.276972-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use gfp_has_io_fs() instead of open-code.
Link: https://lkml.kernel.org/r/20230516063821.121844-12-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When something registers and unregisters many shrinkers, such as:
for x in $(seq 10000); do unshare -Ui true; done
Sometimes the following error is printed to the kernel log:
debugfs: Directory '...' with parent 'shrinker' already present!
This occurs since commit badc28d4924b ("mm: shrinkers: fix deadlock in
shrinker debugfs") / v6.2: Since the call to `debugfs_remove_recursive`
was moved outside the `shrinker_rwsem`/`shrinker_mutex` lock, but the call
to `ida_free` stayed inside, a newly registered shrinker can be
re-assigned that ID and attempt to create the debugfs directory before the
directory from the previous shrinker has been removed.
The locking changes in commit f95bdb700bc6 ("mm: vmscan: make global slab
shrink lockless") made the race condition more likely, though it existed
before then.
Commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
could be reverted since the issue is addressed should no longer occur
since the count and scan operations are lockless since commit 20cd1892fcc3
("mm: shrinkers: make count and scan in shrinker debugfs lockless").
However, since this is a contended lock, prefer instead moving `ida_free`
outside the lock to avoid the race.
Link: https://lkml.kernel.org/r/20230503013232.299211-1-joanbrugueram@gmail.com
Fixes: badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the page is pinned, there's no point in trying to reclaim it.
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).
Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
Android 14 and later default to MGLRU [1] and field telemetry showed
occasional long tail latency (>100ms) in the reclaim path.
Tracing revealed priority inversion in the reclaim path. In
try_to_inc_max_seq(), when high priority tasks were blocked on
wait_event_killable(), the preemption of the low priority task to call
wake_up_all() caused those high priority tasks to wait longer than
necessary. In general, this problem is not different from others of its
kind, e.g., one caused by mutex_lock(). However, it is specific to MGLRU
because it introduced the new wait queue lruvec->mm_state.wait.
The purpose of this new wait queue is to avoid the thundering herd
problem. If many direct reclaimers rush into try_to_inc_max_seq(), only
one can succeed, i.e., the one to wake up the rest, and the rest who
failed might cause premature OOM kills if they do not wait. So far there
is no evidence supporting this scenario, based on how often the wait has
been hit. And this begs the question how useful the wait queue is in
practice.
Based on Minchan's recommendation, which is in line with his commit
6d4675e60135 ("mm: don't be stuck to rmap lock on reclaim path") and the
rest of the MGLRU code which also uses trylock when possible, remove the
wait queue.
[1] https://android-review.googlesource.com/q/I7ed7fbfd6ef9ce10053347528125dd98c39e50bf
Link: https://lkml.kernel.org/r/20230413214326.2147568-1-kaleshsingh@google.com
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Reported-by: Wei Wang <wvw@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move set_task_reclaim_state() near flush_reclaim_state() so that all
helpers manipulating reclaim_state are in close proximity.
Link: https://lkml.kernel.org/r/20230413104034.1086717-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Ignore non-LRU-based reclaim in memcg reclaim", v6.
Upon running some proactive reclaim tests using memory.reclaim, we noticed
some tests flaking where writing to memory.reclaim would be successful
even though we did not reclaim the requested amount fully Looking further
into it, I discovered that *sometimes* we overestimate the number of
reclaimed pages in memcg reclaim.
Reclaimed pages through other means than LRU-based reclaim are tracked
through reclaim_state in struct scan_control, which is stashed in current
task_struct. These pages are added to the number of reclaimed pages
through LRUs. For memcg reclaim, these pages generally cannot be linked
to the memcg under reclaim and can cause an overestimated count of
reclaimed pages. This short series tries to address that.
Patch 1 ignores pages reclaimed outside of LRU reclaim in memcg reclaim.
The pages are uncharged anyway, so even if we end up under-reporting
reclaimed pages we will still succeed in making progress during charging.
Patches 2-3 are just refactoring. Patch 2 moves set_reclaim_state()
helper next to flush_reclaim_state(). Patch 3 adds a helper that wraps
updating current->reclaim_state, and renames reclaim_state->reclaimed_slab
to reclaim_state->reclaimed.
This patch (of 3):
We keep track of different types of reclaimed pages through
reclaim_state->reclaimed_slab, and we add them to the reported number of
reclaimed pages. For non-memcg reclaim, this makes sense. For memcg
reclaim, we have no clue if those pages are charged to the memcg under
reclaim.
Slab pages are shared by different memcgs, so a freed slab page may have
only been partially charged to the memcg under reclaim. The same goes for
clean file pages from pruned inodes (on highmem systems) or xfs buffer
pages, there is no simple way to currently link them to the memcg under
reclaim.
Stop reporting those freed pages as reclaimed pages during memcg reclaim.
This should make the return value of writing to memory.reclaim, and may
help reduce unnecessary reclaim retries during memcg charging. Writing to
memory.reclaim on the root memcg is considered as cgroup_reclaim(), but
for this case we want to include any freed pages, so use the
global_reclaim() check instead of !cgroup_reclaim().
Generally, this should make the return value of
try_to_free_mem_cgroup_pages() more accurate. In some limited cases (e.g.
freed a slab page that was mostly charged to the memcg under reclaim),
the return value of try_to_free_mem_cgroup_pages() can be underestimated,
but this should be fine. The freed pages will be uncharged anyway, and we
can charge the memcg the next time around as we usually do memcg reclaim
in a retry loop.
Link: https://lkml.kernel.org/r/20230413104034.1086717-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230413104034.1086717-2-yosryahmed@google.com
Fixes: f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects
instead of pages")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The difference between sc->nr_reclaimed and nr_reclaimed is computed three
times. Introduce a new variable to record the value, so it only needs to
be computed once.
Link: https://lkml.kernel.org/r/20230411061757.12041-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memory reclaim is a sleepable context. Flushing is an expensive operaiton
that scales with the number of cpus and the number of cgroups in the
system, so avoid doing it atomically unnecessarily. This can slow down
reclaim code if flushing stats is taking too long, but there is already
multiple cond_resched()'s in reclaim code.
Link: https://lkml.kernel.org/r/20230330191801.1967435-8-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, all contexts that flush memcg stats do so with sleeping not
allowed. Some of these contexts are perfectly safe to sleep in, such as
reading cgroup files from userspace or the background periodic flusher.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka
sleepable), and provide a separate atomic version. The atomic version is
used in reclaim, refault, writeback, and in mem_cgroup_usage(). All other
code paths are left to use the non-atomic version. This includes
callbacks for userspace reads and the periodic flusher.
Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(),
change it to mem_cgroup_flush_stats_atomic_ratelimited(). Reclaim and
refault code paths are modified to do non-atomic flushing in separate
later patches -- so it will eventually be changed back to
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.
This definition is counter-intuitive and lead to number of bugs all over
the kernel.
Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.
[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now there are no readers of shrinker_rwsem, so we can simply replace it
with mutex lock.
Link: https://lkml.kernel.org/r/20230313112819.38938-9-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, the synchronize_shrinkers() is only used by TTM pool. It only
requires that no shrinkers run in parallel, and doesn't care about
registering and unregistering of shrinkers.
Since slab shrink is protected by SRCU, synchronize_srcu() is sufficient
to ensure that no shrinker is running in parallel. So the shrinker_rwsem
in synchronize_shrinkers() is no longer needed, just remove it.
Link: https://lkml.kernel.org/r/20230313112819.38938-8-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For now, reparent_shrinker_deferred() is the only holder of read lock of
shrinker_rwsem. And it already holds the global cgroup_mutex, so it will
not be called in parallel.
Therefore, in order to convert shrinker_rwsem to shrinker_mutex later,
here we change to hold the write lock of shrinker_rwsem to reparent.
Link: https://lkml.kernel.org/r/20230313112819.38938-7-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After we make slab shrink lockless with SRCU, the longest sleep
unregister_shrinker() will be a sleep waiting for all do_shrink_slab()
calls.
To avoid long unbreakable action in the unregister_shrinker(), add
shrinker_srcu_generation to restore a check similar to the
rwsem_is_contendent() check that we had before.
And for memcg slab shrink, we unlock SRCU and continue iterations from the
next shrinker id.
Link: https://lkml.kernel.org/r/20230313112819.38938-5-zhengqi.arch@bytedance.com
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Like global slab shrink, this commit also uses SRCU to make memcg slab
shrink lockless.
We can reproduce the down_read_trylock() hotspot through the
following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
mkdir -p /sys/fs/cgroup/perf_event/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands.
Then we can use the following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
32.31% [kernel] [k] down_read_trylock
19.40% [kernel] [k] pv_native_safe_halt
16.24% [kernel] [k] up_read
15.70% [kernel] [k] shrink_slab
4.69% [kernel] [k] _find_next_bit
2.62% [kernel] [k] shrink_node
1.78% [kernel] [k] shrink_lruvec
0.76% [kernel] [k] do_shrink_slab
2) After applying this patchset:
27.83% [kernel] [k] _find_next_bit
16.97% [kernel] [k] shrink_slab
15.82% [kernel] [k] pv_native_safe_halt
9.58% [kernel] [k] shrink_node
8.31% [kernel] [k] shrink_lruvec
5.64% [kernel] [k] do_shrink_slab
3.88% [kernel] [k] mem_cgroup_iter
At the same time, we use the following perf command to capture
IPC information:
perf stat -e cycles,instructions -G test -a --repeat 5 -- sleep 10
1) Before applying this patchset:
Performance counter stats for 'system wide' (5 runs):
454187219766 cycles test ( +- 1.84% )
78896433101 instructions test # 0.17 insn per cycle ( +- 0.44% )
10.0020430 +- 0.0000366 seconds time elapsed ( +- 0.00% )
2) After applying this patchset:
Performance counter stats for 'system wide' (5 runs):
841954709443 cycles test ( +- 15.80% ) (98.69%)
527258677936 instructions test # 0.63 insn per cycle ( +- 15.11% ) (98.68%)
10.01064 +- 0.00831 seconds time elapsed ( +- 0.08% )
We can see that IPC drops very seriously when calling
down_read_trylock() at high frequency. After using SRCU,
the IPC is at a normal level.
Link: https://lkml.kernel.org/r/20230313112819.38938-4-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Vlastimil Babka <Vbabka@suse.cz>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many
filesystems mounted or unmounted at the same time,
slab shrink will be affected (down_read_trylock()
failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. If we have a long shrinker list and we do not reclaim enough
memory with each shrinker, then the down_read_trylock() may be called with
high frequency. Because of the poor multicore scalability of atomic
operations, this can lead to a significant drop in IPC (instructions per
cycle).
So many times in history ([2],[3],[4],[5]), some people wanted to replace
shrinker_rwsem trylock with SRCU in the slab shrink, but all these patches
were abandoned because SRCU was not unconditionally enabled.
But now, since commit 1cd0bd06093c ("rcu: Remove CONFIG_SRCU"), the SRCU
is unconditionally enabled. So it's time to use SRCU to protect readers
who previously held shrinker_rwsem.
This commit uses SRCU to make global slab shrink lockless,
the memcg slab shrink is handled in the subsequent patch.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/all/1437080113.3596.2.camel@stgolabs.net/
[3]. https://lore.kernel.org/lkml/1510609063-3327-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp/
[4]. https://lore.kernel.org/lkml/153365347929.19074.12509495712735843805.stgit@localhost.localdomain/
[5]. https://lore.kernel.org/lkml/20210927074823.5825-1-sultan@kerneltoast.com/
Link: https://lkml.kernel.org/r/20230313112819.38938-3-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
