summaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)Author
2016-05-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull writeback fix from Jens Axboe: "Just a single fix for domain aware writeback, fixing a regression that can cause balance_dirty_pages() to keep looping while not getting any work done" * 'for-linus' of git://git.kernel.dk/linux-block: writeback: Fix performance regression in wb_over_bg_thresh()
2016-05-05mm: fix kcompactd hang during memory offliningVlastimil Babka
Assume memory47 is the last online block left in node1. This will hang: # echo offline > /sys/devices/system/node/node1/memory47/state After a couple of minutes, the following pops up in dmesg: INFO: task bash:957 blocked for more than 120 seconds. Not tainted 4.6.0-rc6+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. bash D ffff8800b7adbaf8 0 957 951 0x00000000 Call Trace: schedule+0x35/0x80 schedule_timeout+0x1ac/0x270 wait_for_completion+0xe1/0x120 kthread_stop+0x4f/0x110 kcompactd_stop+0x26/0x40 __offline_pages.constprop.28+0x7e6/0x840 offline_pages+0x11/0x20 memory_block_action+0x73/0x1d0 memory_subsys_offline+0x47/0x60 device_offline+0x86/0xb0 store_mem_state+0xda/0xf0 dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x11d/0x170 __vfs_write+0x37/0x120 vfs_write+0xa9/0x1a0 SyS_write+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xa4 kcompactd is waiting for kcompactd_max_order > 0 when it's woken up to actually exit. Check kthread_should_stop() to break out of the wait. Fixes: 698b1b306 ("mm, compaction: introduce kcompactd"). Reported-by: Reza Arbab <arbab@linux.vnet.ibm.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05mm/zswap: provide unique zpool nameDan Streetman
Instead of using "zswap" as the name for all zpools created, add an atomic counter and use "zswap%x" with the counter number for each zpool created, to provide a unique name for each new zpool. As zsmalloc, one of the zpool implementations, requires/expects a unique name for each pool created, zswap should provide a unique name. The zsmalloc pool creation does not fail if a new pool with a conflicting name is created, unless CONFIG_ZSMALLOC_STAT is enabled; in that case, zsmalloc pool creation fails with -ENOMEM. Then zswap will be unable to change its compressor parameter if its zpool is zsmalloc; it also will be unable to change its zpool parameter back to zsmalloc, if it has any existing old zpool using zsmalloc with page(s) in it. Attempts to change the parameters will result in failure to create the zpool. This changes zswap to provide a unique name for each zpool creation. Fixes: f1c54846ee45 ("zswap: dynamic pool creation") Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <dan.streetman@canonical.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05mm, cma: prevent nr_isolated_* counters from going negativeHugh Dickins
/proc/sys/vm/stat_refresh warns nr_isolated_anon and nr_isolated_file go increasingly negative under compaction: which would add delay when should be none, or no delay when should delay. The bug in compaction was due to a recent mmotm patch, but much older instance of the bug was also noticed in isolate_migratepages_range() which is used for CMA and gigantic hugepage allocations. The bug is caused by putback_movable_pages() in an error path decrementing the isolated counters without them being previously incremented by acct_isolated(). Fix isolate_migratepages_range() by removing the error-path putback, thus reaching acct_isolated() with migratepages still isolated, and leaving putback to caller like most other places do. Fixes: edc2ca612496 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") [vbabka@suse.cz: expanded the changelog] Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05mm: update min_free_kbytes from khugepaged after core initializationJason Baron
Khugepaged attempts to raise min_free_kbytes if its set too low. However, on boot khugepaged sets min_free_kbytes first from subsys_initcall(), and then the mm 'core' over-rides min_free_kbytes after from init_per_zone_wmark_min(), via a module_init() call. Khugepaged used to use a late_initcall() to set min_free_kbytes (such that it occurred after the core initialization), however this was removed when the initialization of min_free_kbytes was integrated into the starting of the khugepaged thread. The fix here is simply to invoke the core initialization using a core_initcall() instead of module_init(), such that the previous initialization ordering is restored. I didn't restore the late_initcall() since start_stop_khugepaged() already sets min_free_kbytes via set_recommended_min_free_kbytes(). This was noticed when we had a number of page allocation failures when moving a workload to a kernel with this new initialization ordering. On an 8GB system this restores min_free_kbytes back to 67584 from 11365 when CONFIG_TRANSPARENT_HUGEPAGE=y is set and either CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y or CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y. Fixes: 79553da293d3 ("thp: cleanup khugepaged startup") Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05huge pagecache: mmap_sem is unlocked when truncation splits pmdHugh Dickins
zap_pmd_range()'s CONFIG_DEBUG_VM !rwsem_is_locked(&mmap_sem) BUG() will be invalid with huge pagecache, in whatever way it is implemented: truncation of a hugely-mapped file to an unhugely-aligned size would easily hit it. (Although anon THP could in principle apply khugepaged to private file mappings, which are not excluded by the MADV_HUGEPAGE restrictions, in practice there's a vm_ops check which excludes them, so it never hits this BUG() - there's no interface to "truncate" an anonymous mapping.) We could complicate the test, to check i_mmap_rwsem also when there's a vm_file; but my inclination was to make zap_pmd_range() more readable by simply deleting this check. A search has shown no report of the issue in the years since commit e0897d75f0b2 ("mm, thp: print useful information when mmap_sem is unlocked in zap_pmd_range") expanded it from VM_BUG_ON() - though I cannot point to what commit I would say then fixed the issue. But there are a couple of other patches now floating around, neither yet in the tree: let's agree to retain the check as a VM_BUG_ON_VMA(), as Matthew Wilcox has done; but subject to a vma_is_anonymous() check, as Kirill Shutemov has done. And let's get this in, without waiting for any particular huge pagecache implementation to reach the tree. Matthew said "We can reproduce this BUG() in the current Linus tree with DAX PMDs". Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Matthew Wilcox <willy@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05mm: thp: correct split_huge_pages file permissionYang Shi
split_huge_pages doesn't support get method at all, so the read permission sounds confusing, change the permission to write only. And, add "\n" to the output of set method to make it more readable. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05writeback: Fix performance regression in wb_over_bg_thresh()Howard Cochran
Commit 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations") unintentionally changed this function's meaning from "are there more dirty pages than the background writeback threshold" to "are there more dirty pages than the writeback threshold". The background writeback threshold is typically half of the writeback threshold, so this had the effect of raising the number of dirty pages required to cause a writeback worker to perform background writeout. This can cause a very severe performance regression when a BDI uses BDI_CAP_STRICTLIMIT because balance_dirty_pages() and the writeback worker can now disagree on whether writeback should be initiated. For example, in a system having 1GB of RAM, a single spinning disk, and a "pass-through" FUSE filesystem mounted over the disk, application code mmapped a 128MB file on the disk and was randomly dirtying pages in that mapping. Because FUSE uses strictlimit and has a default max_ratio of only 1%, in balance_dirty_pages, thresh is ~200, bg_thresh is ~100, and the dirty_freerun_ceiling is the average of those, ~150. So, it pauses the dirtying processes when we have 151 dirty pages and wakes up a background writeback worker. But the worker tests the wrong threshold (200 instead of 100), so it does not initiate writeback and just returns. Thus, balance_dirty_pages keeps looping, sleeping and then waking up the worker who will do nothing. It remains stuck in this state until the few dirty pages that we have finally expire and we write them back for that reason. Then the whole process repeats, resulting in near-zero throughput through the FUSE BDI. The fix is to call the parameterized variant of wb_calc_thresh, so that the worker will do writeback if the bg_thresh is exceeded which was the behavior before the referenced commit. Fixes: 947e9762a8dd ("writeback: update wb_over_bg_thresh() to use wb_domain aware operations") Signed-off-by: Howard Cochran <hcochran@kernelspring.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v4.2+ Tested-by Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-28mm/memory-failure: fix race with compound page split/mergeKonstantin Khlebnikov
get_hwpoison_page() must recheck relation between head and tail pages. n-horiguchi said: without this recheck, the race causes kernel to pin an irrelevant page, and finally makes kernel crash for refcount mismatch. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28mm: wake kcompactd before kswapd's short sleepVlastimil Babka
When kswapd goes to sleep it checks if the node is balanced and at first it sleeps only for HZ/10 time, then rechecks if the node is still balanced and nobody has woken it during the initial sleep. Only then it goes fully sleep until an allocation slowpath wakes it up again. For higher-order allocations, waking up kcompactd is done only before the full sleep. This turns out to be an issue in case another high-order allocation fails during the initial sleep. It will wake kswapd up, however kswapd considers the zone balanced from the order-0 perspective, and will just quickly try to sleep again. So if there's a longer stream of high-order allocations hitting the slowpath and waking up kswapd, it might never actually wake up kcompactd, which may be considered a regression from kswapd-based compaction. In the worst case, it might be that a single allocation that cannot direct reclaim/compact itself is waking kswapd in the retry loop and preventing kcompactd from being woken up and unblocking it. This patch makes sure kcompactd is woken up in such situations by simply moving the wakeup before the short initial sleep. More efficient solution would be to wake kcompactd immediately instead of kswapd if the node is already order-0 balanced, but in that case we should also move reset_isolation_suitable() call to kcompactd so it's not adding to the allocator's latency. Since it's late in the 4.6 cycle, let's go with the simpler change for now. Fixes: accf62422b3a ("mm, kswapd: replace kswapd compaction with waking up kcompactd") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28mm/hwpoison: fix wrong num_poisoned_pages accountingMinchan Kim
Currently, migration code increses num_poisoned_pages on *failed* migration page as well as successfully migrated one at the trial of memory-failure. It will make the stat wrong. As well, it marks the page as PG_HWPoison even if the migration trial failed. It would mean we cannot recover the corrupted page using memory-failure facility. This patches fixes it. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28mm: call swap_slot_free_notify() with page lock heldMinchan Kim
Kyeongdon reported below error which is BUG_ON(!PageSwapCache(page)) in page_swap_info. The reason is that page_endio in rw_page unlocks the page if read I/O is completed so we need to hold a PG_lock again to check PageSwapCache. Otherwise, the page can be removed from swapcache. Kernel BUG at c00f9040 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 4 PID: 13446 Comm: RenderThread Tainted: G W 3.10.84-g9f14aec-dirty #73 task: c3b73200 ti: dd192000 task.ti: dd192000 PC is at page_swap_info+0x10/0x2c LR is at swap_slot_free_notify+0x18/0x6c pc : [<c00f9040>] lr : [<c00f5560>] psr: 400f0113 sp : dd193d78 ip : c2deb1e4 fp : da015180 r10: 00000000 r9 : 000200da r8 : c120fe08 r7 : 00000000 r6 : 00000000 r5 : c249a6c0 r4 : = c249a6c0 r3 : 00000000 r2 : 40080009 r1 : 200f0113 r0 : = c249a6c0 ..<snip> .. Call Trace: page_swap_info+0x10/0x2c swap_slot_free_notify+0x18/0x6c swap_readpage+0x90/0x11c read_swap_cache_async+0x134/0x1ac swapin_readahead+0x70/0xb0 handle_pte_fault+0x320/0x6fc handle_mm_fault+0xc0/0xf0 do_page_fault+0x11c/0x36c do_DataAbort+0x34/0x118 Fixes: 3f2b1a04f44933f2 ("zram: revive swap_slot_free_notify") Signed-off-by: Minchan Kim <minchan@kernel.org> Tested-by: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28mm: vmscan: reclaim highmem zone if buffer_heads is over limitMinchan Kim
We have been reclaimed highmem zone if buffer_heads is over limit but commit 6b4f7799c6a5 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") changed the behavior so it doesn't reclaim highmem zone although buffer_heads is over the limit. This patch restores the logic. Fixes: 6b4f7799c6a5 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28numa: fix /proc/<pid>/numa_maps for THPGerald Schaefer
In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA checkKonstantin Khlebnikov
Khugepaged detects own VMAs by checking vm_file and vm_ops but this way it cannot distinguish private /dev/zero mappings from other special mappings like /dev/hpet which has no vm_ops and popultes PTEs in mmap. This fixes false-positive VM_BUG_ON and prevents installing THP where they are not expected. Link: http://lkml.kernel.org/r/CACT4Y+ZmuZMV5CjSFOeXviwQdABAgT7T+StKfTqan9YDtgEi5g@mail.gmail.com Fixes: 78f11a255749 ("mm: thp: fix /dev/zero MAP_PRIVATE and vm_flags cleanups") Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28thp: keep huge zero page pinned until tlb flushKirill A. Shutemov
Andrea has found[1] a race condition on MMU-gather based TLB flush vs split_huge_page() or shrinker which frees huge zero under us (patch 1/2 and 2/2 respectively). With new THP refcounting, we don't need patch 1/2: mmu_gather keeps the page pinned until flush is complete and the pin prevents the page from being split under us. We still need patch 2/2. This is simplified version of Andrea's patch. We don't need fancy encoding. [1] http://lkml.kernel.org/r/1447938052-22165-1-git-send-email-aarcange@redhat.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-25memcg: relocate charge moving from ->attach to ->post_attachTejun Heo
Hello, So, this ended up a lot simpler than I originally expected. I tested it lightly and it seems to work fine. Petr, can you please test these two patches w/o the lru drain drop patch and see whether the problem is gone? Thanks. ------ 8< ------ If charge moving is used, memcg performs relabeling of the affected pages from its ->attach callback which is called under both cgroup_threadgroup_rwsem and thus can't create new kthreads. This is fragile as various operations may depend on workqueues making forward progress which relies on the ability to create new kthreads. There's no reason to perform charge moving from ->attach which is deep in the task migration path. Move it to ->post_attach which is called after the actual migration is finished and cgroup_threadgroup_rwsem is dropped. * move_charge_struct->mm is added and ->can_attach is now responsible for pinning and recording the target mm. mem_cgroup_clear_mc() is updated accordingly. This also simplifies mem_cgroup_move_task(). * mem_cgroup_move_task() is now called from ->post_attach instead of ->attach. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@kernel.org> Debugged-and-tested-by: Petr Mladek <pmladek@suse.com> Reported-by: Cyril Hrubis <chrubis@suse.cz> Reported-by: Johannes Weiner <hannes@cmpxchg.org> Fixes: 1ed1328792ff ("sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem") Cc: <stable@vger.kernel.org> # 4.4+
2016-04-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes for the current series. This contains: - Two fixes for NVMe: One fixes a reset race that can be triggered by repeated insert/removal of the module. The other fixes an issue on some platforms, where we get probe timeouts since legacy interrupts isn't working. This used not to be a problem since we had the worker thread poll for completions, but since that was killed off, it means those poor souls can't successfully probe their NVMe device. Use a proper IRQ check and probe (msi-x -> msi ->legacy), like most other drivers to work around this. Both from Keith. - A loop corruption issue with offset in iters, from Ming Lei. - A fix for not having the partition stat per cpu ref count initialized before sending out the KOBJ_ADD, which could cause user space to access the counter prior to initialization. Also from Ming Lei. - A fix for using the wrong congestion state, from Kaixu Xia" * 'for-linus' of git://git.kernel.dk/linux-block: block: loop: fix filesystem corruption in case of aio/dio NVMe: Always use MSI/MSI-x interrupts NVMe: Fix reset/remove race writeback: fix the wrong congested state variable definition block: partition: initialize percpuref before sending out KOBJ_ADD
2016-04-14Merge branch 'mm-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull mm gup cleanup from Ingo Molnar: "This removes the ugly get-user-pages API hack, now that all upstream code has been migrated to it" ("ugly" is putting it mildly. But it worked.. - Linus) * 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
2016-04-07mm/gup: Remove the macro overload API migration helpers from the get_user*() ↵Ingo Molnar
APIs The pkeys changes brought about a truly hideous set of macros in: cde70140fed8 ("mm/gup: Overload get_user_pages() functions") ... which macros are (ab-)using the fact that __VA_ARGS__ can be used to shift parameter positions in macro arguments without breaking the build and so can be used to call separate C functions depending on the number of arguments of the macro. This allowed easy migration of these 3 GUP APIs, as both these variants worked at the C level: old: ret = get_user_pages(current, current->mm, address, 1, 1, 0, &page, NULL); new: ret = get_user_pages(address, 1, 1, 0, &page, NULL); ... while we also generated a (functionally harmless but noticeable) build time warning if the old API was used. As there are over 300 uses of these APIs, this trick eased the migration of the API and avoided excessive migration pain in linux-next. Now, with its work done, get rid of all of that complication and ugliness: 3 files changed, 16 insertions(+), 140 deletions(-) ... where the linecount of the migration hack was further inflated by the fact that there are NOMMU variants of these GUP APIs as well. Much of the conversion was done in linux-next over the past couple of months, and Linus recently removed all remaining old API uses from the upstream tree in the following upstrea commit: cb107161df3c ("Convert straggling drivers to new six-argument get_user_pages()") There was one more old-API usage in mm/gup.c, in the CONFIG_HAVE_GENERIC_RCU_GUP code path that ARM, ARM64 and PowerPC uses. After this commit any old API usage will break the build. [ Also fixed a PowerPC/HAVE_GENERIC_RCU_GUP warning reported by Stephen Rothwell. ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-04Merge branch 'PAGE_CACHE_SIZE-removal'Linus Torvalds
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov: "PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. Let's stop pretending that pages in page cache are special. They are not. The first patch with most changes has been done with coccinelle. The second is manual fixups on top. The third patch removes macros definition" [ I was planning to apply this just before rc2, but then I spaced out, so here it is right _after_ rc2 instead. As Kirill suggested as a possibility, I could have decided to only merge the first two patches, and leave the old interfaces for compatibility, but I'd rather get it all done and any out-of-tree modules and patches can trivially do the converstion while still also working with older kernels, so there is little reason to try to maintain the redundant legacy model. - Linus ] * PAGE_CACHE_SIZE-removal: mm: drop PAGE_CACHE_* and page_cache_{get,release} definition mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm/page_isolation.c: fix the function commentsNeil Zhang
Commit fea85cff11de ("mm/page_isolation.c: return last tested pfn rather than failure indicator") changed the meaning of the return value. Let's change the function comments as well. Signed-off-by: Neil Zhang <neilzhang1123@hotmail.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list headMichal Hocko
Commit bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") has simplified the check for tasks already enqueued for the oom reaper by checking tsk->oom_reaper_list != NULL. This check is not sufficient because the tsk might be the head of the queue without any other tasks queued and then we would simply lockup looping on the same task. Fix the condition by checking for the head as well. Fixes: bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm/rmap: batched invalidations should use existing apiNadav Amit
The recently introduced batched invalidations mechanism uses its own mechanism for shootdown. However, it does wrong accounting of interrupts (e.g., inc_irq_stat is called for local invalidations), trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and may break some platforms as it bypasses the invalidation mechanisms of Xen and SGI UV. This patch reuses the existing TLB flushing mechnaisms instead. We use NULL as mm to indicate a global invalidation is required. Fixes 72b252aed506b8 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm: fix invalid node in alloc_migrate_target()Xishi Qiu
It is incorrect to use next_node to find a target node, it will return MAX_NUMNODES or invalid node. This will lead to crash in buddy system allocation. Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: "Laura Abbott" <lauraa@codeaurora.org> Cc: Hui Zhu <zhuhui@xiaomi.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01mm, kasan: fix compilation for CONFIG_SLABAlexander Potapenko
Add the missing argument to set_track(). Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Konstantin Serebryany <kcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-31writeback: fix the wrong congested state variable definitionKaixu Xia
The right variable definition should be wb_congested_state that include WB_async_congested and WB_sync_congested. So fix it. Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-25thp: fix typo in khugepaged_scan_pmd()Kirill A. Shutemov
!PageLRU should lead to SCAN_PAGE_LRU, not SCAN_SCAN_ABORT result. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm/filemap: generic_file_read_iter(): check for zero reads unconditionallyNicolai Stange
If - generic_file_read_iter() gets called with a zero read length, - the read offset is at a page boundary, - IOCB_DIRECT is not set - and the page in question hasn't made it into the page cache yet, then do_generic_file_read() will trigger a readahead with a req_size hint of zero. Since roundup_pow_of_two(0) is undefined, UBSAN reports UBSAN: Undefined behaviour in include/linux/log2.h:63:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 3 PID: 1017 Comm: sa1 Tainted: G L 4.5.0-next-20160318+ #14 [...] Call Trace: [...] [<ffffffff813ef61a>] ondemand_readahead+0x3aa/0x3d0 [<ffffffff813ef61a>] ? ondemand_readahead+0x3aa/0x3d0 [<ffffffff813c73bd>] ? find_get_entry+0x2d/0x210 [<ffffffff813ef9c3>] page_cache_sync_readahead+0x63/0xa0 [<ffffffff813cc04d>] do_generic_file_read+0x80d/0xf90 [<ffffffff813cc955>] generic_file_read_iter+0x185/0x420 [...] [<ffffffff81510b06>] __vfs_read+0x256/0x3d0 [...] when get_init_ra_size() gets called from ondemand_readahead(). The net effect is that the initial readahead size is arch dependent for requested read lengths of zero: for example, since 1UL << (sizeof(unsigned long) * 8) evaluates to 1 on x86 while its result is 0 on ARMv7, the initial readahead size becomes 4 on the former and 0 on the latter. What's more, whether or not the file access timestamp is updated for zero length reads is decided differently for the two cases of IOCB_DIRECT being set or cleared: in the first case, generic_file_read_iter() explicitly skips updating that timestamp while in the latter case, it is always updated through the call to do_generic_file_read(). According to POSIX, zero length reads "do not modify the last data access timestamp" and thus, the IOCB_DIRECT behaviour is POSIXly correct. Let generic_file_read_iter() unconditionally check the requested read length at its entry and return immediately with success if it is zero. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, kasan: stackdepot implementation. Enable stackdepot for SLABAlexander Potapenko
Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, kasan: add GFP flags to KASAN APIAlexander Potapenko
Add GFP flags to KASAN hooks for future patches to use. This patch is based on the "mm: kasan: unified support for SLUB and SLAB allocators" patch originally prepared by Dmitry Chernenkov. Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, kasan: SLAB supportAlexander Potapenko
Add KASAN hooks to SLAB allocator. This patch is based on the "mm: kasan: unified support for SLUB and SLAB allocators" patch originally prepared by Dmitry Chernenkov. Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm/page_alloc: prevent merging between isolated and other pageblocksVlastimil Babka
Hanjun Guo has reported that a CMA stress test causes broken accounting of CMA and free pages: > Before the test, I got: > -bash-4.3# cat /proc/meminfo | grep Cma > CmaTotal: 204800 kB > CmaFree: 195044 kB > > > After running the test: > -bash-4.3# cat /proc/meminfo | grep Cma > CmaTotal: 204800 kB > CmaFree: 6602584 kB > > So the freed CMA memory is more than total.. > > Also the the MemFree is more than mem total: > > -bash-4.3# cat /proc/meminfo > MemTotal: 16342016 kB > MemFree: 22367268 kB > MemAvailable: 22370528 kB Laura Abbott has confirmed the issue and suspected the freepage accounting rewrite around 3.18/4.0 by Joonsoo Kim. Joonsoo had a theory that this is caused by unexpected merging between MIGRATE_ISOLATE and MIGRATE_CMA pageblocks: > CMA isolates MAX_ORDER aligned blocks, but, during the process, > partialy isolated block exists. If MAX_ORDER is 11 and > pageblock_order is 9, two pageblocks make up MAX_ORDER > aligned block and I can think following scenario because pageblock > (un)isolation would be done one by one. > > (each character means one pageblock. 'C', 'I' means MIGRATE_CMA, > MIGRATE_ISOLATE, respectively. > > CC -> IC -> II (Isolation) > II -> CI -> CC (Un-isolation) > > If some pages are freed at this intermediate state such as IC or CI, > that page could be merged to the other page that is resident on > different type of pageblock and it will cause wrong freepage count. This was supposed to be prevented by CMA operating on MAX_ORDER blocks, but since it doesn't hold the zone->lock between pageblocks, a race window does exist. It's also likely that unexpected merging can occur between MIGRATE_ISOLATE and non-CMA pageblocks. This should be prevented in __free_one_page() since commit 3c605096d315 ("mm/page_alloc: restrict max order of merging on isolated pageblock"). However, we only check the migratetype of the pageblock where buddy merging has been initiated, not the migratetype of the buddy pageblock (or group of pageblocks) which can be MIGRATE_ISOLATE. Joonsoo has suggested checking for buddy migratetype as part of page_is_buddy(), but that would add extra checks in allocator hotpath and bloat-o-meter has shown significant code bloat (the function is inline). This patch reduces the bloat at some expense of more complicated code. The buddy-merging while-loop in __free_one_page() is initially bounded to pageblock_border and without any migratetype checks. The checks are placed outside, bumping the max_order if merging is allowed, and returning to the while-loop with a statement which can't be possibly considered harmful. This fixes the accounting bug and also removes the arguably weird state in the original commit 3c605096d315 where buddies could be left unmerged. Fixes: 3c605096d315 ("mm/page_alloc: restrict max order of merging on isolated pageblock") Link: https://lkml.org/lkml/2016/3/2/280 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Debugged-by: Laura Abbott <labbott@redhat.com> Debugged-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom, oom_reaper: protect oom_reaper_list using simpler wayTetsuo Handa
"oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task" tried to protect oom_reaper_list using MMF_OOM_KILLED flag. But we can do it by simply checking tsk->oom_reaper_list != NULL. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom: make oom_reaper freezableMichal Hocko
After "oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space" oom_reaper will call exit_oom_victim on the target task after it is done. This might however race with the PM freezer: CPU0 CPU1 CPU2 freeze_processes try_to_freeze_tasks # Allocation request out_of_memory oom_killer_disable wake_oom_reaper(P1) __oom_reap_task exit_oom_victim(P1) wait_event(oom_victims==0) [...] do_exit(P1) perform IO/interfere with the freezer which breaks the oom_killer_disable semantic. We no longer have a guarantee that the oom victim won't interfere with the freezer because it might be anywhere on the way to do_exit while the freezer thinks the task has already terminated. It might trigger IO or touch devices which are frozen already. In order to close this race, make the oom_reaper thread freezable. This will work because a) already running oom_reaper will block freezer to enter the quiescent state b) wake_oom_reaper will not wake up the reaper after it has been frozen c) the only way to call exit_oom_victim after try_to_freeze_tasks is from the oom victim's context when we know the further interference shouldn't be possible Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom: make oom_reaper_list single linkedVladimir Davydov
Entries are only added/removed from oom_reaper_list at head so we can use a single linked list and hence save a word in task_struct. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom, oom_reaper: disable oom_reaper for oom_kill_allocating_taskMichal Hocko
Tetsuo has reported that oom_kill_allocating_task=1 will cause oom_reaper_list corruption because oom_kill_process doesn't follow standard OOM exclusion (aka ignores TIF_MEMDIE) and allows to enqueue the same task multiple times - e.g. by sacrificing the same child multiple times. This patch fixes the issue by introducing a new MMF_OOM_KILLED mm flag which is set in oom_kill_process atomically and oom reaper is disabled if the flag was already set. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, oom_reaper: implement OOM victims queuingMichal Hocko
wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, oom_reaper: report success/failureMichal Hocko
Inform about the successful/failed oom_reaper attempts and dump all the held locks to tell us more who is blocking the progress. [akpm@linux-foundation.org: fix CONFIG_MMU=n build] Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address spaceMichal Hocko
When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25mm, oom: introduce oom reaperMichal Hocko
This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22mm/mprotect.c: don't imply PROT_EXEC on non-exec fsPiotr Kwapulinski
The mprotect(PROT_READ) fails when called by the READ_IMPLIES_EXEC binary on a memory mapped file located on non-exec fs. The mprotect does not check whether fs is _executable_ or not. The PROT_EXEC flag is set automatically even if a memory mapped file is located on non-exec fs. Fix it by checking whether a memory mapped file is located on a non-exec fs. If so the PROT_EXEC is not implied by the PROT_READ. The implementation uses the VM_MAYEXEC flag set properly in mmap. Now it is consistent with mmap. I did the isolated tests (PT_GNU_STACK X/NX, multiple VMAs, X/NX fs). I also patched the official 3.19.0-47-generic Ubuntu 14.04 kernel and it seems to work. Signed-off-by: Piotr Kwapulinski <kwapulinski.piotr@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22kernel: add kcov code coverageDmitry Vyukov
kcov provides code coverage collection for coverage-guided fuzzing (randomized testing). Coverage-guided fuzzing is a testing technique that uses coverage feedback to determine new interesting inputs to a system. A notable user-space example is AFL (http://lcamtuf.coredump.cx/afl/). However, this technique is not widely used for kernel testing due to missing compiler and kernel support. kcov does not aim to collect as much coverage as possible. It aims to collect more or less stable coverage that is function of syscall inputs. To achieve this goal it does not collect coverage in soft/hard interrupts and instrumentation of some inherently non-deterministic or non-interesting parts of kernel is disbled (e.g. scheduler, locking). Currently there is a single coverage collection mode (tracing), but the API anticipates additional collection modes. Initially I also implemented a second mode which exposes coverage in a fixed-size hash table of counters (what Quentin used in his original patch). I've dropped the second mode for simplicity. This patch adds the necessary support on kernel side. The complimentary compiler support was added in gcc revision 231296. We've used this support to build syzkaller system call fuzzer, which has found 90 kernel bugs in just 2 months: https://github.com/google/syzkaller/wiki/Found-Bugs We've also found 30+ bugs in our internal systems with syzkaller. Another (yet unexplored) direction where kcov coverage would greatly help is more traditional "blob mutation". For example, mounting a random blob as a filesystem, or receiving a random blob over wire. Why not gcov. Typical fuzzing loop looks as follows: (1) reset coverage, (2) execute a bit of code, (3) collect coverage, repeat. A typical coverage can be just a dozen of basic blocks (e.g. an invalid input). In such context gcov becomes prohibitively expensive as reset/collect coverage steps depend on total number of basic blocks/edges in program (in case of kernel it is about 2M). Cost of kcov depends only on number of executed basic blocks/edges. On top of that, kernel requires per-thread coverage because there are always background threads and unrelated processes that also produce coverage. With inlined gcov instrumentation per-thread coverage is not possible. kcov exposes kernel PCs and control flow to user-space which is insecure. But debugfs should not be mapped as user accessible. Based on a patch by Quentin Casasnovas. [akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode'] [akpm@linux-foundation.org: unbreak allmodconfig] [akpm@linux-foundation.org: follow x86 Makefile layout standards] Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: syzkaller <syzkaller@googlegroups.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tavis Ormandy <taviso@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@google.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: David Drysdale <drysdale@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22zram: revive swap_slot_free_notifyMinchan Kim
Commit b430e9d1c6d4 ("remove compressed copy from zram in-memory") applied swap_slot_free_notify call in *end_swap_bio_read* to remove duplicated memory between zram and memory. However, with the introduction of rw_page in zram: 8c7f01025f7b ("zram: implement rw_page operation of zram"), it became void because rw_page doesn't need bio. Memory footprint is really important in embedded platforms which have small memory, for example, 512M) recently because it could start to kill processes if memory footprint exceeds some threshold by LMK or some similar memory management modules. This patch restores the function for rw_page, thereby eliminating this duplication. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: karam.lee <karam.lee@lge.com> Cc: <sangseok.lee@lge.com> Cc: Chan Jeong <chan.jeong@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-21Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ...
2016-03-20Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ...
2016-03-19Merge tag 'powerpc-4.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...
2016-03-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - a couple of hotfixes - the rest of MM - a new timer slack control in procfs - a couple of procfs fixes - a few misc things - some printk tweaks - lib/ updates, notably to radix-tree. - add my and Nick Piggin's old userspace radix-tree test harness to tools/testing/radix-tree/. Matthew said it was a godsend during the radix-tree work he did. - a few code-size improvements, switching to __always_inline where gcc screwed up. - partially implement character sets in sscanf * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) sscanf: implement basic character sets lib/bug.c: use common WARN helper param: convert some "on"/"off" users to strtobool lib: add "on"/"off" support to kstrtobool lib: update single-char callers of strtobool() lib: move strtobool() to kstrtobool() include/linux/unaligned: force inlining of byteswap operations include/uapi/linux/byteorder, swab: force inlining of some byteswap operations include/asm-generic/atomic-long.h: force inlining of some atomic_long operations usb: common: convert to use match_string() helper ide: hpt366: convert to use match_string() helper ata: hpt366: convert to use match_string() helper power: ab8500: convert to use match_string() helper power: charger_manager: convert to use match_string() helper drm/edid: convert to use match_string() helper pinctrl: convert to use match_string() helper device property: convert to use match_string() helper lib/string: introduce match_string() helper radix-tree tests: add test for radix_tree_iter_next radix-tree tests: add regression3 test ...