summaryrefslogtreecommitdiff
path: root/net/batman-adv/hard-interface.c
AgeCommit message (Collapse)Author
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26batman-adv: Update copyright years for 2018Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Fix internal interface indices typesSven Eckelmann
batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-21batman-adv: Convert packet.h to uapi headerSven Eckelmann
The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15batman-adv: Add kernel-doc to externally visible functionsSven Eckelmann
According to the kernel-doc documentation, externally visible functions should be documented. This refers to all all non-static function which can (and will) be used by functions in other sources files. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Use parentheses in function kernel-docSven Eckelmann
The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: include gfp.h for GFP_* definesSven Eckelmann
The linux/gfp.h provides the GFP_ATOMIC and GFP_KERNEL define. It should therefore be included instead of linux/fs.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add SPDX license identifier above copyright headerSven Eckelmann
The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-10-06Merge tag 'batadv-next-for-davem-20171006' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Cleanup patches to make checkpatch happy, by Sven Eckelmann (3 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to upper device linkingDavid Ahern
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28batman-adv: Remove unnecessary parenthesesSven Eckelmann
checkpatch introduced with commit 63b7c73ec86b ("checkpatch: add --strict check for ifs with unnecessary parentheses") an additional test which identifies some unnecessary parentheses. Remove these unnecessary parentheses to avoid the warnings and to unify the coding style slightly more. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-19Merge tag 'batadv-next-for-davem-20161119' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - 6 patches adding functionality to detect a WiFi interface under other virtual interfaces, like VLANs. They introduce a cache for the detected the WiFi configuration to avoid RTNL locking in critical sections. Patches have been prepared by Marek Lindner and Sven Eckelmann - Enable automatic module loading for genl requests, by Sven Eckelmann - Fix a potential race condition on interface removal. This is not happening very often in practice, but requires bigger changes to fix, so we are sending this to net-next. By Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Merge tag 'batadv-next-for-davem-20161108-v2' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== pull request for net-next: batman-adv 2016-11-08 v2 This feature and cleanup patchset includes the following changes: - netlink and code cleanups by Sven Eckelmann (3 patches) - Cleanup and minor fixes by Linus Luessing (3 patches) - Speed up multicast update intervals, by Linus Luessing - Avoid (re)broadcast in meshes for some easy cases, by Linus Luessing - Clean up tx return state handling, by Sven Eckelmann (6 patches) - Fix some special mac address handling cases, by Sven Eckelmann (3 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-08batman-adv: Update wifi flags on upper link changeSven Eckelmann
Things like VLANs don't have their link set when they are created. Thus the wifi flags have to be evaluated later to fix their contents for the link interface. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: retrieve B.A.T.M.A.N. V WiFi neighbor stats from real interfaceMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [sven.eckelmann@open-mesh.com: re-add batadv_get_real_netdev to take rtnl semaphore for batadv_get_real_netdevice] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: additional checks for virtual interfaces on top of WiFiMarek Lindner
In a few situations batman-adv tries to determine whether a given interface is a WiFi interface to enable specific WiFi optimizations. If the interface batman-adv has been configured with is a virtual interface (e.g. VLAN) it would not be properly detected as WiFi interface and thus not benefit from the special WiFi treatment. This patch changes that by peeking under the hood whenever a virtual interface is in play. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [sven.eckelmann@open-mesh.com: integrate in wifi_flags caching, retrieve namespace of link interface] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: Cache the type of wifi device for each hardifSven Eckelmann
batman-adv is requiring the type of wifi device in different contexts. Some of them can take the rtnl semaphore and some of them already have the semaphore taken. But even others don't allow that the semaphore will be taken. The data has to be retrieved when the hardif is added to batman-adv because some of the wifi information for an hardif will only be available with rtnl lock. It can then be cached in the batadv_hard_iface and the functions is_wifi_netdev and is_cfg80211_netdev can just compare the correct bits without imposing extra locking requirements. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: refactor wifi interface detectionMarek Lindner
The ELP protocol requires cfg80211 to auto-detect the WiFi througput to a given neighbor. Use batadv_is_cfg80211_netdev() to determine whether or not an interface is eligible. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: Return non-const ptr in batadv_getlink_netSven Eckelmann
The returned net_namespace of batadv_getlink_net may be used with functions that potentially modify the struct. Thus it must return the pointer as non-const like rtnl_link_ops::get_link_net does. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-04batman-adv: Revert "fix splat on disabling an interface"Sven Eckelmann
The commit 9799c50372b2 ("batman-adv: fix splat on disabling an interface") fixed a warning but at the same time broke the rtnl function add_slave for devices which were temporarily removed. batadv_softif_slave_add requires soft_iface of and hard_iface to be NULL before it is allowed to be enslaved. But this resetting of soft_iface to NULL in batadv_hardif_disable_interface was removed with the aforementioned commit. Reported-by: Julian Labus <julian@freifunk-rtk.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Simple (re)broadcast avoidanceLinus Lüssing
With this patch, (re)broadcasting on a specific interfaces is avoided: * No neighbor: There is no need to broadcast on an interface if there is no node behind it. * Single neighbor is source: If there is just one neighbor on an interface and if this neighbor is the one we actually got this broadcast packet from, then we do not need to echo it back. * Single neighbor is originator: If there is just one neighbor on an interface and if this neighbor is the originator of this broadcast packet, then we do not need to echo it back. Goodies for BATMAN V: ("Upgrade your BATMAN IV network to V now to get these for free!") Thanks to the split of OGMv1 into two packet types, OGMv2 and ELP that is, we can now apply the same optimizations stated above to OGMv2 packets, too. Furthermore, with BATMAN V, rebroadcasts can be reduced in certain multi interface cases, too, where BATMAN IV cannot. This is thanks to the removal of the "secondary interface originator" concept in BATMAN V. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-21batman-adv: fix splat on disabling an interfaceLinus Lüssing
As long as there is still a reference for a hard interface held, there might still be a forwarding packet relying on its attributes. Therefore avoid setting hard_iface->soft_iface to NULL when disabling a hard interface. This fixes the following, potential splat: batman_adv: bat0: Interface deactivated: eth1 batman_adv: bat0: Removing interface: eth1 cgroup: new mount options do not match the existing superblock, will be ignored batman_adv: bat0: Interface deactivated: eth3 batman_adv: bat0: Removing interface: eth3 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1986 at ./net/batman-adv/bat_iv_ogm.c:549 batadv_iv_send_outstanding_bat_ogm_packet+0x145/0x643 [batman_adv] Modules linked in: batman_adv(O-) <...> CPU: 3 PID: 1986 Comm: kworker/u8:2 Tainted: G W O 4.6.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet [batman_adv] 0000000000000000 ffff88001d93bca0 ffffffff8126c26b 0000000000000000 0000000000000000 ffff88001d93bcf0 ffffffff81051615 ffff88001f19f818 000002251d93bd68 0000000000000046 ffff88001dc04a00 ffff88001becbe48 Call Trace: [<ffffffff8126c26b>] dump_stack+0x67/0x90 [<ffffffff81051615>] __warn+0xc7/0xe5 [<ffffffff8105164b>] warn_slowpath_null+0x18/0x1a [<ffffffffa0356f24>] batadv_iv_send_outstanding_bat_ogm_packet+0x145/0x643 [batman_adv] [<ffffffff8108b01f>] ? __lock_is_held+0x32/0x54 [<ffffffff810689a2>] process_one_work+0x2a8/0x4f5 [<ffffffff81068856>] ? process_one_work+0x15c/0x4f5 [<ffffffff81068df2>] worker_thread+0x1d5/0x2c0 [<ffffffff81068c1d>] ? process_scheduled_works+0x2e/0x2e [<ffffffff81068c1d>] ? process_scheduled_works+0x2e/0x2e [<ffffffff8106dd90>] kthread+0xc0/0xc8 [<ffffffff8144de82>] ret_from_fork+0x22/0x40 [<ffffffff8106dcd0>] ? __init_kthread_worker+0x55/0x55 ---[ end trace 647f9f325123dc05 ]--- What happened here is, that there was still a forw_packet (here: a BATMAN IV OGM) in the queue of eth3 with the forw_packet->if_incoming set to eth1 and the forw_packet->if_outgoing set to eth3. When eth3 is to be deactivated and removed, then this thread waits for the forw_packet queued on eth3 to finish. Because eth1 was deactivated and removed earlier and by that had forw_packet->if_incoming->soft_iface, set to NULL, the splat when trying to send/flush the OGM on eth3 occures. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: Reduced size of Oops message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Keep batadv netdev when hardif disappearsSven Eckelmann
Switch-like virtual interfaces like bridge or openvswitch don't destroy itself when all their attached netdevices dissappear. Instead they only remove the link to the unregistered device and keep working until they get removed manually. This has the benefit that all configurations for this interfaces are kept and daemons reacting to rtnl events can just add new slave interfaces without going through the complete configuration of the switch-like netdevice. Handling unregister events of client devices similar in batman-adv allows users to drop their current workaround of dummy netdevices attached to batman-adv soft-interfaces. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Place kref_get for hard_iface near useSven Eckelmann
It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Handle parent interfaces in a different netnsAndrew Lunn
batman-adv tries to prevent the user from placing a batX soft interface into another batman mesh as a hard interface. It does this by walking up the devices list of parents and ensures they are all none batX interfaces. iflink can point to an interface in a different namespace, so also retrieve the parents name space when finding the parent and use it when doing the comparison. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven@narfation.org: Fix alignments, simplify parent netns retrieval] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: Revert "postpone sysfs removal when unregistering"Sven Eckelmann
Postponing the removal of the interface breaks the expected behavior of NETDEV_UNREGISTER and NETDEV_PRE_TYPE_CHANGE. This is especially problematic when an interface is removed and added in quick succession. This reverts commit 5bc44dc8458c ("batman-adv: postpone sysfs removal when unregistering"). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04batman-adv: split routing API data structure in subobjectsAntonio Quartulli
The routing API data structure contains several function pointers that can easily be grouped together based on the component they work with. Split the API in subobjects in order to improve definition readability. At the same time, remove the "bat_" prefix from the API object and its fields names. These are batman-adv private structs and there is no need to always prepend such prefix, which only makes function invocations much much longer. Signed-off-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Fix bat_(iv|v) function declaration headerSven Eckelmann
The bat_algo.h had some functions declared which were not part of the bat_algo.c file. These are instead stored in bat_v.c and bat_iv_ogm.c. The declaration should therefore be also in bat_v.h and bat_iv_ogm,h to make them easier to find. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Consolidate logging related functionsSven Eckelmann
There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Keep includes ordered by filenameSven Eckelmann
It is easier to detect if a include is already there for a used functionality when the includes are ordered. Using an alphabetic order together with the grouping in commit 1e2c2a4fe4a5 ("batman-adv: Add required includes to all files") makes includes better manageable. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: init ELP tweaking options only onceMarek Lindner
The ELP interval and throughput override interface settings are initialized with default settings on every time an interface is added to a mesh. This patch prevents this behavior by moving the configuration init to the interface detection routine which runs only once per interface. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [a@unstable.cc: move initialization to batadv_v_hardif_init] Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: remove ogm_emit and ogm_schedule API callsAntonio Quartulli
The ogm_emit and ogm_schedule API calls were rather tight to the B.A.T.M.A.N. IV logic and therefore rather difficult to use with other algorithm implementations. Remove such calls and move the surrounding logic into the B.A.T.M.A.N. IV specific code. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for hard_iface subfunctionsSven Eckelmann
The callers of the functions using batadv_hard_iface objects already make sure that they hold a valid reference. The subfunctions don't have to check whether the reference counter is > 0 because this was checked by the callers. The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Increase hard_iface refcnt for ptypeSven Eckelmann
The hard_iface is referenced in the packet_type for batman-adv. Increase the refcounter of the hard_interface for it to have an explicit reference for it in case this functionality gets refactorted and the currently used implicit reference for it will be removed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Create batman soft interfaces within correct netns.Andrew Lunn
When creating a soft interface, create it in the same netns as the hard interface. Replace all references to init_net with the correct name space for the interface being manipulated. Suggested-by: Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP eventAntonio Quartulli
At the moment there is no explicit reactivation of an hard-interface upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is reactivated as soon as the next OGM is scheduled for sending, but this mechanism does not work with B.A.T.M.A.N. V. The latter does not rely on the same scheduling mechanism as its predecessor and for this reason the hard-interface remains deactivated forever after being brought down once. This patch fixes the reactivation mechanism by adding a new routing API which explicitly allows each algorithm to perform any needed operation upon interface re-activation. Such API is optional and is implemented by B.A.T.M.A.N. V only and it just takes care of setting the iface status to ACTIVE Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-24batman-adv: Deactivate TO_BE_ACTIVATED hardif on shutdownSven Eckelmann
The shutdown of an batman-adv interface can happen with one of its slave interfaces still being in the BATADV_IF_TO_BE_ACTIVATED state. A possible reason for it is that the routing algorithm BATMAN_V was selected and batadv_schedule_bat_ogm was not yet called for this interface. This slave interface still has to be set to BATADV_IF_INACTIVE or the batman-adv interface will never reduce its usage counter and thus never gets shutdown. This problem can be simulated via: $ modprobe dummy $ modprobe batman-adv routing_algo=BATMAN_V $ ip link add bat0 type batadv $ ip link set dummy0 master bat0 $ ip link set dummy0 up $ ip link del bat0 unregister_netdevice: waiting for bat0 to become free. Usage count = 3 Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16batman-adv: Avoid endless loop in bat-on-bat netdevice checkAndrew Lunn
batman-adv checks in different situation if a new device is already on top of a different batman-adv device. This is done by getting the iflink of a device and all its parent. It assumes that this iflink is always a parent device in an acyclic graph. But this assumption is broken by devices like veth which are actually a pair of two devices linked to each other. The recursive check would therefore get veth0 when calling dev_get_iflink on veth1. And it gets veth0 when calling dev_get_iflink with veth1. Creating a veth pair and loading batman-adv freezes parts of the system ip link add veth0 type veth peer name veth1 modprobe batman-adv An RCU stall will be detected on the system which cannot be fixed. INFO: rcu_sched self-detected stall on CPU 1: (5264 ticks this GP) idle=3e9/140000000000001/0 softirq=144683/144686 fqs=5249 (t=5250 jiffies g=46 c=45 q=43) Task dump for CPU 1: insmod R running task 0 247 245 0x00000008 ffffffff8151f140 ffffffff8107888e ffff88000fd141c0 ffffffff8151f140 0000000000000000 ffffffff81552df0 ffffffff8107b420 0000000000000001 ffff88000e3fa700 ffffffff81540b00 ffffffff8107d667 0000000000000001 Call Trace: <IRQ> [<ffffffff8107888e>] ? rcu_dump_cpu_stacks+0x7e/0xd0 [<ffffffff8107b420>] ? rcu_check_callbacks+0x3f0/0x6b0 [<ffffffff8107d667>] ? hrtimer_run_queues+0x47/0x180 [<ffffffff8107cf9d>] ? update_process_times+0x2d/0x50 [<ffffffff810873fb>] ? tick_handle_periodic+0x1b/0x60 [<ffffffff810290ae>] ? smp_trace_apic_timer_interrupt+0x5e/0x90 [<ffffffff813bbae2>] ? apic_timer_interrupt+0x82/0x90 <EOI> [<ffffffff812c3fd7>] ? __dev_get_by_index+0x37/0x40 [<ffffffffa0031f3e>] ? batadv_hard_if_event+0xee/0x3a0 [batman_adv] [<ffffffff812c5801>] ? register_netdevice_notifier+0x81/0x1a0 [...] This can be avoided by checking if two devices are each others parent and stopping the check in this situation. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven@narfation.org: rewritten description, extracted fix] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_hard_iface to krefSven Eckelmann
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Drop reference to netdevice on last referenceSven Eckelmann
The references to the network device should be dropped inside the release function for batadv_hard_iface similar to what is done with the batman-adv internal datastructures. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: update copyright years for 2016Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix kerneldoc parsing of return descriptionSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-12-16batman-adv: add list of unique single hop neighbors per hard-interfaceMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-05batman-adv: Act on NETDEV_*_TYPE_CHANGE eventsAndrew Lunn
A network interface can change type. It may change from a type which batman does not support, e.g. hdlc, to one it does, e.g. hdlc-eth. When an interface changes type, it sends two notifications. Handle these notifications. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net: add possibility to pass information about upper device via notifierJiri Pirko
Sometimes the drivers and other code would find it handy to know some internal information about upper device being changed. So allow upper-code to pass information down to notifier listeners during linking. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>