summaryrefslogtreecommitdiff
path: root/net/batman-adv/icmp_socket.c
AgeCommit message (Collapse)Author
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2017-12-21batman-adv: Convert packet.h to uapi headerSven Eckelmann
The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15batman-adv: Add kernel-doc to externally visible functionsSven Eckelmann
According to the kernel-doc documentation, externally visible functions should be documented. This refers to all all non-static function which can (and will) be used by functions in other sources files. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Use parentheses in function kernel-docSven Eckelmann
The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: include gfp.h for GFP_* definesSven Eckelmann
The linux/gfp.h provides the GFP_ATOMIC and GFP_KERNEL define. It should therefore be included instead of linux/fs.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add SPDX license identifier above copyright headerSven Eckelmann
The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-11-27net: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-28batman-adv: Remove unnecessary parenthesesSven Eckelmann
checkpatch introduced with commit 63b7c73ec86b ("checkpatch: add --strict check for ifs with unnecessary parentheses") an additional test which identifies some unnecessary parentheses. Remove these unnecessary parentheses to avoid the warnings and to unify the coding style slightly more. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-19batman-adv: Use octal permissions instead of macrosSven Eckelmann
Linus prefers to have octal permission numbers instead of combinations of macro names ("random line noise"). Also old existing "bad symbolic permission bit macro use" should be converted to octal numbers. (http://lkml.kernel.org/r/CA+55aFw5v23T-zvDZp-MmD_EYxF8WbafwwB59934FV7g21uMGQ@mail.gmail.com) Also remove the S_IFREG bit from the octal representation because it is filtered out by debugfs_create. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Consolidate logging related functionsSven Eckelmann
There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-04batman-adv: fix wrong names in kerneldocAntonio Quartulli
Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: Fix additional names] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-04batman-adv: use list_for_each_entry_safeGeliang Tang
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-29batman-adv: keep track of when unicast packets are sentAntonio Quartulli
To enable ELP to send probing packets over wireless links only if needed, batman-adv must keep track of the last time it sent a unicast packet towards every neighbour. For this purpose a 2 main changes are introduced: 1) a new member of the elp_neigh_node structure stores the last time a unicast packet was sent towards this neighbour; 2) a wrapper function for sending unicast packets is implemented. This function will simply update the member describe din point 1) and then forward the packet to the real sending routine. Point 2) implies that any code-path leading to a unicast sending now has to use the new wrapper. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-23batman-adv: Rename batadv_neigh_node *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_node *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: update copyright years for 2016Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-08-25batman-adv: Fix kerneldoc over 80 column linesSven Eckelmann
Kerneldoc required single line documentation in the past (before 2009). Therefore, the 80 columns limit per line check of checkpatch was disabled for kerneldoc. But kerneldoc is not excluded anymore from it and checkpatch now enabled the check again. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Replace C99 int types with kernel typeSven Eckelmann
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: update copyright years for 2015Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-22batman-adv: prefer ether_addr_copy to memcpyAntonio Quartulli
On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split out router from orig_nodeSimon Wunderlich
For the network wide multi interface optimization there are different routers for each outgoing interface (outgoing from the OGM perspective, incoming for payload traffic). To reflect this, change the router and associated data to a list of routers. While at it, rename batadv_orig_node_get_router() to batadv_orig_router_get() to follow the new naming scheme. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix header alignment by unrolling batadv_headerSimon Wunderlich
The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-23batman-adv: generalize batman-adv icmp packet handlingSimon Wunderlich
Instead of handling icmp packets only up to length of icmp_packet_rr, the code should handle any icmp length size. Therefore the length truncating is moved to when the packet is actually sent to userspace (this does not support lengths longer than icmp_packet_rr yet). Longer packets are forwarded without truncating. This patch also cleans up some parts where the icmp header struct could be used instead of other icmp_packet(_rr) structs to make the code more readable. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: create common header for ICMP packetsAntonio Quartulli
the icmp and the icmp_rr packets share the same initial fields since they use the same code to be processed and forwarded. Extract the common fields and put them into a separate struct so that future ICMP packets can be easily added without bloating the packet definition. However, keep the seqno field outside of the newly created common header because future ICMP types may require a bigger sequence number space. This change breaks compatibility due to fields reordering in the ICMP headers. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-28batman-adv: set skb priority according to contentSimon Wunderlich
The skb priority field may help the wireless driver to choose the right queue (e.g. WMM queues). This should be set in batman-adv, as this information is only available here. This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that only VLAN PCP is used if a VLAN header is present. Also initially set TC_PRIO_CONTROL only for self-generated packets, and keep the priority set by higher layers. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: don't deal with NET_IP_ALIGN manuallyAntonio Quartulli
Instead of dealing with NET_IP_ALIGN during allocation and headroom reservation, it is possible to use netdev_alloc_skb_ip_align() which transparently allocate and reserve the correct amount of data Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19batman-adv: update copyright yearsAntonio Quartulli
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-07batman-adv: Reserve extra bytes in skb for better alignmentSven Eckelmann
The ethernet header is 14 bytes long. Therefore, the data after it is not 4 byte aligned and may cause problems on systems without unaligned data access. Reserving NET_IP_ALIGN more byes can fix the misalignment of the ethernet header. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: Check return value of try_module_getSven Eckelmann
New operations should not be started when they need an increased module reference counter and try_module_get failed. This patch addresses Coverity #712284: Unchecked return value Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-01batman-adv: Prefix types structs with batadv_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix packet structs with batadv_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix main enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix packet enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix hard-interface enum with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix packet defines with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix icmp_socket defines with BATADV_Sven Eckelmann
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-25batman-adv: Prefix icmp_socket local static functions with batadv_Sven Eckelmann
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-25batman-adv: Prefix main static inline functions with batadv_Sven Eckelmann
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-24batman-adv: Prefix originator static inline functions with batadv_Sven Eckelmann
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-24batman-adv: Prefix hard-interface static inline functions with batadv_Sven Eckelmann
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Reformat multiline comments to consistent styleSven Eckelmann
batman-adv doesn't follow the style for multiline comments that David S. Miller prefers. All comments should be reformatted to follow this consistent style to make the code slightly more readable. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix main non-static functions with batadv_Sven Eckelmann
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix send non-static functions with batadv_Sven Eckelmann
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>