summaryrefslogtreecommitdiff
path: root/net/batman-adv
AgeCommit message (Collapse)Author
2019-01-22bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() callsLinus Lüssing
This patch refactors ip_mc_check_igmp(), ipv6_mc_check_mld() and their callers (more precisely, the Linux bridge) to not rely on the skb_trimmed parameter anymore. An skb with its tail trimmed to the IP packet length was initially introduced for the following three reasons: 1) To be able to verify the ICMPv6 checksum. 2) To be able to distinguish the version of an IGMP or MLD query. They are distinguishable only by their size. 3) To avoid parsing data for an IGMPv3 or MLDv2 report that is beyond the IP packet but still within the skb. The first case still uses a cloned and potentially trimmed skb to verfiy. However, there is no need to propagate it to the caller. For the second and third case explicit IP packet length checks were added. This hopefully makes ip_mc_check_igmp() and ipv6_mc_check_mld() easier to read and verfiy, as well as easier to use. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-11-12batman-adv: enable MCAST by default at compile timeLinus Lüssing
Thanks to rigorous testing in wireless community mesh networks several issues with multicast entries in the translation table were found and fixed in the last 1.5 years. Now we see the first larger networks (a few hundred nodes) with a batman-adv version with multicast optimizations enabled arising, with no TT / multicast optimization related issues so far. Therefore it seems safe to enable multicast optimizations by default. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Move CRC16 dependency to BATMAN_ADV_BLASven Eckelmann
The commit ced72933a5e8 ("batman-adv: use CRC32C instead of CRC16 in TT code") switched the translation table code from crc16 to crc32c. The (optional) bridge loop avoidance code is the only user of this function. batman-adv should only select CRC16 when it is actually using it. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent multicast netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent local TT netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent dat netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent claim netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent backbone netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Store modification counter via hash helpersSven Eckelmann
Multiple datastructures use the hash helper functions to add and remove entries from the simple hlist based hashes. These are often also dumped to userspace via netlink and thus should have a generation sequence counter. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent hardif netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. And an external generation sequence counter is introduced which tracks all modifications of the list. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent gateway netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. And an external generation sequence counter is introduced which tracks all modifications of the list. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Fix description for BATMAN_ADV_DEBUGSven Eckelmann
The debug messages of batman-adv are not printed to the kernel log at all but can be stored (depending on the compile setting) in the tracing buffer or the batadv specific log buffer. There is also no debug module parameter but a batadv netdev specific log_level setting to enable/disable different classes of debug messages at runtime. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Allow to use BATMAN_ADV_DEBUG without BATMAN_ADV_DEBUGFSSven Eckelmann
The BATMAN_ADV_DEBUGFS portion of batman-adv is marked as deprecated. Thus all required functionality should be available without it. The debug log was already modified to also output via the kernel tracing function but still retained its BATMAN_ADV_DEBUGFS functionality. Separate the entry point for the debug log from the debugfs portions to make it possible to build with BATMAN_ADV_DEBUG and without BATMAN_ADV_DEBUGFS. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Improve includes for trace functionalitySven Eckelmann
The batadv_dbg trace event uses different functionality and datastructures which are not directly associated with the trace infrastructure. It should not be expected that the trace headers indirectly provide them and instead include the required headers directly. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add includes for deprecation warningSven Eckelmann
The commit 00caf6a2b318 ("batman-adv: Mark debugfs functionality as deprecated") introduced various messages to inform the user about the deprecation of the debugfs based functionality. The messages also include the context/task in which this problem was observed. The datastructures and functions to access this information require special headers. These should be included directly instead of depending on a more complex and fragile include chain. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Drop unused lockdep includeSven Eckelmann
The commit dee222c7b20c ("batman-adv: Move OGM rebroadcast stats to orig_ifinfo") removed all used functionality of the include linux/lockdep.h from batadv_iv_ogm.c. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Expand merged fragment buffer for full packetSven Eckelmann
The complete size ("total_size") of the fragmented packet is stored in the fragment header and in the size of the fragment chain. When the fragments are ready for merge, the skbuff's tail of the first fragment is expanded to have enough room after the data pointer for at least total_size. This means that it gets expanded by total_size - first_skb->len. But this is ignoring the fact that after expanding the buffer, the fragment header is pulled by from this buffer. Assuming that the tailroom of the buffer was already 0, the buffer after the data pointer of the skbuff is now only total_size - len(fragment_header) large. When the merge function is then processing the remaining fragments, the code to copy the data over to the merged skbuff will cause an skb_over_panic when it tries to actually put enough data to fill the total_size bytes of the packet. The size of the skb_pull must therefore also be taken into account when the buffer's tailroom is expanded. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net> Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Use explicit tvlv padding for ELP packetsSven Eckelmann
The announcement messages of batman-adv COMPAT_VERSION 15 have the possibility to announce additional information via a dynamic TVLV part. This part is optional for the ELP packets and currently not parsed by the Linux implementation. Still out-of-tree versions are using it to transport things like neighbor hashes to optimize the rebroadcast behavior. Since the ELP broadcast packets are smaller than the minimal ethernet packet, it often has to be padded. This is often done (as specified in RFC894) with octets of zero and thus work perfectly fine with the TVLV part (making it a zero length and thus empty). But not all ethernet compatible hardware seems to follow this advice. To avoid ambiguous situations when parsing the TVLV header, just force the 4 bytes (TVLV length + padding) after the required ELP header to zero. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15batman-adv: Enable LockLess TX for softifSven Eckelmann
The batadv interfaces are virtual interfaces which just tunnel the traffic over other ethernet compatible interfaces. It doesn't need serialization during the tx phase and is using RCU for most of its internal datastructures. Since it doesn't have actual queues which could be locked independently, the throughput gets significantly reduced by the extra lock in the core net code. 8 parallel TCP connections forwarded by an IPQ4019 based hardware over 5GHz could reach: * without LLTX: 349 Mibit/s * with LLTX: 563 Mibit/s Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-15batman-adv: Move OGM rebroadcast stats to orig_ifinfoSven Eckelmann
B.A.T.M.A.N. IV requires the number of rebroadcast from a neighboring originator. These statistics are gathered per interface which transmitted the OGM (and then received it again). Since an originator is not interface specific, a resizable array was used in each originator. This resizable array had an entry for each interface and had to be resizes (for all OGMs) when the number of active interface was modified. This could cause problems when a large number of interface is added and not enough continuous memory is available to allocate the array. There is already a per interface originator structure "batadv_orig_ifinfo" which can be used to store this information. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-15batman-adv: Provide debug messages as trace eventsSven Eckelmann
A private debug logging infrastructure is currently provided via $debug_fs/batman_adv/*/log when CONFIG_BATMAN_ADV_DEBUG is enabled. This is not well integrated in the rest of the tracing infrastructure of the kernel. Other components (like mac80211 or ath10k) allow to gather the debug messages using generic trace events which are better integrated. This makes it possible to interact with them using the existing userspace tools. The tracepoint batadv:batadv_dbg will now be available when CONFIG_BATMAN_ADV_DEBUG and CONFIG_BATMAN_ADV_TRACING is activated. The log level mask is still used for filtering as usual. A full system trace for offline parsing can be created (and read) using: $ batctl ll all $ trace-cmd record -e batadv:batadv_dbg $ trace-cmd report The same can also be done without recording to a file $ batctl ll all $ trace-cmd stream -e batadv:batadv_dbg The trace infrastructure is especially helpful when tracing processes: $ batctl ll all $ ./tools/perf/perf trace --event "batadv:*" batctl p 10.204.32.1 0.000 batadv:batadv_dbg:batman_adv bat0 Parsing outgoing ARP REQUEST 0.045 batadv:batadv_dbg:batman_adv bat0 ARP MSG = [src: a2:64:14:53:f8:22-10.204.32.185 dst: 00:00:00:00:00:00-10.204.32.1] 0.067 batadv:batadv_dbg:batman_adv bat0 Entry updated: 10.204.32.185 a2:64:14:53:f8:22 (vid: -1) 0.099 batadv:batadv_dbg:batman_adv bat0 batadv_dat_select_candidates(): IP=10.204.32.1 hash(IP)=48902 0.757 batadv:batadv_dbg:batman_adv bat0 dat_select_candidates() 0: selected fe:2c:91:68:29:2b addr=48977 dist=65460 1.178 batadv:batadv_dbg:batman_adv bat0 dat_select_candidates() 1: selected fe:81:ab:c5:e3:03 addr=49181 dist=65256 1.809 batadv:batadv_dbg:batman_adv bat0 dat_select_candidates() 2: selected 66:25:a7:48:37:fb addr=49328 dist=65109 1.828 batadv:batadv_dbg:batman_adv bat0 DHT_SEND for 10.204.32.1 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-14batman-adv: Increase version number to 2018.3Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-14batman-adv: Mark debugfs functionality as deprecatedSven Eckelmann
CONFIG_BATMAN_ADV_DEBUGFS is disabled by default because debugfs is not supported for batman-adv interfaces in any non-default netns. Any remaining users of this interface should still be informed about the deprecation and the generic netlink alternative. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-14batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-07batman-adv: fix hardif_neigh refcount on queue_work() failureMarek Lindner
The hardif_neigh refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-07batman-adv: fix backbone_gw refcount on queue_work() failureMarek Lindner
The backbone_gw refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Prevent duplicated tvlv handlerSven Eckelmann
The function batadv_tvlv_handler_register is responsible for adding new tvlv_handler to the handler_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Prevent duplicated global TT entrySven Eckelmann
The function batadv_tt_global_orig_entry_add is responsible for adding new tt_orig_list_entry to the orig_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d657e621a0f5 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Prevent duplicated softif_vlan entrySven Eckelmann
The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Prevent duplicated nc_node entrySven Eckelmann
The function batadv_nc_get_nc_node is responsible for adding new nc_nodes to the in_coding_list and out_coding_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d56b1705e28c ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Prevent duplicated gateway_node entrySven Eckelmann
The function batadv_gw_node_add is responsible for adding new gw_node to the gateway_list. It is expecting that the caller already checked that there is not already an entry with the same key or not. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Fix segfault when writing to sysfs elp_intervalSven Eckelmann
The per hardif sysfs file "batman_adv/elp_interval" is using the generic functions to store/show uint values. The helper __batadv_store_uint_attr requires the softif net_device as parameter to print the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0744ff8fa8fa ("batman-adv: Add hard_iface specific sysfs wrapper macros for UINT") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Fix segfault when writing to throughput_overrideSven Eckelmann
The per hardif sysfs file "batman_adv/throughput_override" prints the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-09-06batman-adv: Avoid probe ELP information leakSven Eckelmann
The probe ELPs for WiFi interfaces are expanded to contain at least BATADV_ELP_MIN_PROBE_SIZE bytes. This is usually a lot more than the number of bytes which the template ELP packet requires. These extra padding bytes were not initialized and thus could contain data which were previously stored at the same location. It is therefore required to set it to some predefined or random values to avoid leaking private information from the system transmitting these kind of packets. Fixes: e4623c913508 ("batman-adv: Avoid probe ELP information leak") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18Merge tag 'batadv-next-for-davem-20180717' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - Don't call BATMAN_V experimental in Kconfig anymore, by Sven Eckelmann - Enable DAT by default at compile time, by Antonio Quartulli - Remove obsolete default n in Kconfig, by Sven Eckelmann - Fix checkpatch spelling errors, by Sven Eckelmann - Unify header guards style, by Sven Eckelmann - Consolidate batadv_purge_orig functions, by Sven Eckelmann - Replace type define with proper typedef, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08batman-adv: Convert batadv_dat_addr_t to proper typeSven Eckelmann
The #define for batadv_dat_addr_t is doing nothing else than giving u16 a new typename. But C already has the special keyword "typedef" which is also better supported by kernel-doc. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-07-07batman-adv: Join batadv_purge_orig_ref and _batadv_purge_origSven Eckelmann
The single line function batadv_purge_orig_ref has no function beside providing the name used by other source files. This can also be done simpler by just renaming _batadv_purge_orig to batadv_purge_orig_ref. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-07-07batman-adv: Unify include guards styleSven Eckelmann
All other include guards in batman-adv use the style: * _NET_BATMAN_ADV_$(FILENAME)_ * uppercase only * "." & "-" replaced with "_" Use this also in the B.A.T.M.A.N. IV/V OGM implementation headers. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-07-05batman-adv: fix checkpatch warning about misspelled "cache"Sven Eckelmann
commit a2d4df9b673c ("spelling.txt: add more spellings to spelling.txt") introduced the spellcheck of "cache" for checkpatch.pl. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Remove "default n" in KconfigSven Eckelmann
The "default n" is the default value for any bool or tristate Kconfig setting. It is therefore not necessary to add it to a config entry. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: enable DAT by default at compile timeAntonio Quartulli
DAT (Distributed ARP Table) has been enabled by default in the out-of-tree batman-adv kernel module for several years already. It can now be enabled in the kernel too. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Drop "experimental" from BATMAN_V KconfigSven Eckelmann
The Kconfig option BATMAN_ADV_BATMAN_V is now enabled by default when the BATMAN_ADV is enabled. A feature which is enabled by default for a module should not be considered experimental. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Fix multicast TT issues with bogus ROAM flagsLinus Lüssing
When a (broken) node wrongly sends multicast TT entries with a ROAM flag then this causes any receiving node to drop all entries for the same multicast MAC address announced by other nodes, leading to packet loss. Fix this DoS vector by only storing TT sync flags. For multicast TT non-sync'ing flag bits like ROAM are unused so far anyway. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Reported-by: Leonardo Mörlein <me@irrelefant.net> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Avoid storing non-TT-sync flags on singular entries tooLinus Lüssing
Since commit 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") TT sync flags and TT non-sync'd flags are supposed to be stored separately. The previous patch missed to apply this separation on a TT entry with only a single TT orig entry. This is a minor fix because with only a single TT orig entry the DDoS issue the former patch solves does not apply. Fixes: 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-06-23batman-adv: Fix debugfs path for renamed softifSven Eckelmann
batman-adv is creating special debugfs directories in the init net_namespace for each created soft-interface (batadv net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new batadv net_device with the name "bat0". batman-adv is then also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "bat1" and registers a different batadv device with the name "bat0". batman-adv will then try to create a directory with the name "bat0" under $debugfs/batman-adv/ again. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for soft-interfaces whenever it detects such a net_device rename. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>