summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2016-08-25Bluetooth: Fix hci_sock_recvmsg when MSG_TRUNC is not setLuiz Augusto von Dentz
Similar to bt_sock_recvmsg MSG_TRUNC shall be checked using the original flags not msg_flags. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-25Bluetooth: Fix bt_sock_recvmsg when MSG_TRUNC is not setLuiz Augusto von Dentz
Commit b5f34f9420b50c9b5876b9a2b68e96be6d629054 attempt to introduce proper handling for MSG_TRUNC but recv and variants should still work as read if no flag is passed, but because the code may set MSG_TRUNC to msg->msg_flags that shall not be used as it may cause it to be behave as if MSG_TRUNC is always, so instead of using it this changes the code to use the flags parameter which shall contain the original flags. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-24Bluetooth: split sk_filter in l2cap_sock_recv_cbDaniel Borkmann
During an audit for sk_filter(), we found that rx_busy_skb handling in l2cap_sock_recv_cb() and l2cap_sock_recvmsg() looks not quite as intended. The assumption from commit e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") is that errors returned from sock_queue_rcv_skb() are due to receive buffer shortage. However, nothing should prevent doing a setsockopt() with SO_ATTACH_FILTER on the socket, that could drop some of the incoming skbs when handled in sock_queue_rcv_skb(). In that case sock_queue_rcv_skb() will return with -EPERM, propagated from sk_filter() and if in L2CAP_MODE_ERTM mode, wrong assumption was that we failed due to receive buffer being full. From that point onwards, due to the to-be-dropped skb being held in rx_busy_skb, we cannot make any forward progress as rx_busy_skb is never cleared from l2cap_sock_recvmsg(), due to the filter drop verdict over and over coming from sk_filter(). Meanwhile, in l2cap_sock_recv_cb() all new incoming skbs are being dropped due to rx_busy_skb being occupied. Instead, just use __sock_queue_rcv_skb() where an error really tells that there's a receive buffer issue. Split the sk_filter() and enable it for non-segmented modes at queuing time since at this point in time the skb has already been through the ERTM state machine and it has been acked, so dropping is not allowed. Instead, for ERTM and streaming mode, call sk_filter() in l2cap_data_rcv() so the packet can be dropped before the state machine sees it. Fixes: e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-24Bluetooth: Fix memory leak at end of hci requestsFrederic Dalleau
In hci_req_sync_complete the event skb is referenced in hdev->req_skb. It is used (via hci_req_run_skb) from either __hci_cmd_sync_ev which will pass the skb to the caller, or __hci_req_sync which leaks. unreferenced object 0xffff880005339a00 (size 256): comm "kworker/u3:1", pid 1011, jiffies 4294671976 (age 107.389s) backtrace: [<ffffffff818d89d9>] kmemleak_alloc+0x49/0xa0 [<ffffffff8116bba8>] kmem_cache_alloc+0x128/0x180 [<ffffffff8167c1df>] skb_clone+0x4f/0xa0 [<ffffffff817aa351>] hci_event_packet+0xc1/0x3290 [<ffffffff8179a57b>] hci_rx_work+0x18b/0x360 [<ffffffff810692ea>] process_one_work+0x14a/0x440 [<ffffffff81069623>] worker_thread+0x43/0x4d0 [<ffffffff8106ead4>] kthread+0xc4/0xe0 [<ffffffff818dd38f>] ret_from_fork+0x1f/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-18Bluetooth: Add debugfs fields for hardware and firmware infoMarcel Holtmann
Some Bluetooth controllers allow for reading hardware and firmware related vendor specific infos. If they are available, then they can be exposed via debugfs now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-17Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTUAmadeusz Sławiński
When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-07-13Bluetooth: Increment management interface revisionJohan Hedberg
Increment the mgmt revision due to the recently added new reason code for the Disconnected event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-13Bluetooth: Add Authentication Failed reason to Disconnected Mgmt eventSzymon Janc
If link is disconnected due to Authentication Failure (PIN or Key Missing status) userspace will be notified about this with proper error code. Many LE profiles define "PIN or Key Missing" status as indication of remote lost bond so this allows userspace to take action on this. @ Device Connected: 88:63:DF:88:0E:83 (1) flags 0x0000 02 01 1a 05 03 0a 18 0d 18 0b 09 48 65 61 72 74 ...........Heart 20 52 61 74 65 Rate > HCI Event: Command Status (0x0f) plen 4 LE Read Remote Used Features (0x08|0x0016) ncmd 1 Status: Success (0x00) > ACL Data RX: Handle 3585 flags 0x02 dlen 11 ATT: Read By Group Type Request (0x10) len 6 Handle range: 0x0001-0xffff Attribute group type: Primary Service (0x2800) > HCI Event: LE Meta Event (0x3e) plen 12 LE Read Remote Used Features (0x04) Status: Success (0x00) Handle: 3585 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 3585 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: 26201cd479a0921b6f949f0b1fa8dc82 > HCI Event: Command Status (0x0f) plen 4 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Encryption Change (0x08) plen 4 Status: PIN or Key Missing (0x06) Handle: 3585 Encryption: Disabled (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 3585 Reason: Authentication Failure (0x05) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 3585 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: 88:63:DF:88:0E:83 (1) reason 4 @ Device Connected: C4:43:8F:A3:4D:83 (0) flags 0x0000 08 09 4e 65 78 75 73 20 35 ..Nexus 5 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: C4:43:8F:A3:4D:83 (LG Electronics) < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 Address: C4:43:8F:A3:4D:83 (LG Electronics) Link key: 080812e4aa97a863d11826f71f65a933 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 Status: Success (0x00) Address: C4:43:8F:A3:4D:83 (LG Electronics) > HCI Event: Auth Complete (0x06) plen 3 Status: PIN or Key Missing (0x06) Handle: 75 @ Authentication Failed: C4:43:8F:A3:4D:83 (0) status 0x05 < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 75 Reason: Remote User Terminated Connection (0x13) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 75 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: C4:43:8F:A3:4D:83 (0) reason 4 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann
The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Remove controller device attributesMarcel Holtmann
The controller device attributes are not used and expose no valuable information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Remove connection link attributesMarcel Holtmann
The connection link attributes are not used and expose no valuable information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-08Bluetooth: Fix hci_sock_recvmsg return valueDenis Kenzior
If recvmsg is called with a destination buffer that is too small to receive the contents of skb in its entirety, the return value from recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM semantics. If destination buffer provided by userspace is too small (e.g. len < copied), then MSG_TRUNC flag is set and copied is returned. Instead, it should return the length of the message, which is consistent with how other datagram based sockets act. Quoting 'man recv': "All three calls return the length of the message on successful comple‐ tion. If a message is too long to fit in the supplied buffer, excess bytes may be discarded depending on the type of socket the message is received from." and "MSG_TRUNC (since Linux 2.2) For raw (AF_PACKET), Internet datagram (since Linux 2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram (since Linux 3.4) sockets: return the real length of the packet or datagram, even when it was longer than the passed buffer." Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08Bluetooth: Fix bt_sock_recvmsg return valueDenis Kenzior
If recvmsg is called with a destination buffer that is too small to receive the contents of skb in its entirety, the return value from recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM semantics. If destination buffer provided by userspace is too small (e.g. len < copied), then MSG_TRUNC flag is set and copied is returned. Instead, it should return the length of the message, which is consistent with how other datagram based sockets act. Quoting 'man recv': "All three calls return the length of the message on successful comple‐ tion. If a message is too long to fit in the supplied buffer, excess bytes may be discarded depending on the type of socket the message is received from." and "MSG_TRUNC (since Linux 2.2) For raw (AF_PACKET), Internet datagram (since Linux 2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram (since Linux 3.4) sockets: return the real length of the packet or datagram, even when it was longer than the passed buffer." Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08Bluetooth: Switch SMP to crypto_cipher_encrypt_one()Andy Lutomirski
SMP does ECB crypto on stack buffers. This is complicated and fragile, and it will not work if the stack is virtually allocated. Switch to the crypto_cipher interface, which is simpler and safer. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-06-09net: add netdev_lockdep_set_classes() helperEric Dumazet
It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net_sched: transform qdisc running bit into a seqcountEric Dumazet
Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13Bluetooth: fix power_on vs close raceJiri Slaby
With all the latest fixes applied, I am still able to reproduce this (and other) warning(s): WARNING: CPU: 1 PID: 19684 at ../kernel/workqueue.c:4092 destroy_workqueue+0x70a/0x770() ... Call Trace: [<ffffffff819fee81>] ? dump_stack+0xb3/0x112 [<ffffffff8117377e>] ? warn_slowpath_common+0xde/0x140 [<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770 [<ffffffff811739ae>] ? warn_slowpath_null+0x2e/0x40 [<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770 [<ffffffffa0c944c9>] ? hci_unregister_dev+0x2a9/0x720 [bluetooth] [<ffffffffa0b301db>] ? vhci_release+0x7b/0xf0 [hci_vhci] [<ffffffffa0b30160>] ? vhci_flush+0x50/0x50 [hci_vhci] [<ffffffff8117cd73>] ? do_exit+0x863/0x2b90 This is due to race present in the hci_unregister_dev path. hdev->power_on work races with hci_dev_do_close. One tries to open, the other tries to close, leading to warning like the above. (Another example is a warning in kobject_get or kobject_put depending on who wins the race.) Fix this by switching those two racers to ensure hdev->power_on never triggers while hci_dev_do_close is in progress. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-04-26 Here's another set of Bluetooth & 802.15.4 patches for the 4.7 kernel: - Cleanups & refactoring of ieee802154 & 6lowpan code - Security related additions to ieee802154 and mrf24j40 driver - Memory corruption fix to Bluetooth 6lowpan code - Race condition fix in vhci driver - Enhancements to the atusb 802.15.4 driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26Bluetooth: 6lowpan: Fix memory corruption of ipv6 destination addressGlenn Ruben Bakke
The memcpy of ipv6 header destination address to the skb control block (sbk->cb) in header_create() results in currupted memory when bt_xmit() is issued. The skb->cb is "released" in the return of header_create() making room for lower layer to minipulate the skb->cb. The value retrieved in bt_xmit is not persistent across header creation and sending, and the lower layer will overwrite portions of skb->cb, making the copied destination address wrong. The memory corruption will lead to non-working multicast as the first 4 bytes of the copied destination address is replaced by a value that resolves into a non-multicast prefix. This fix removes the dependency on the skb control block between header creation and send, by moving the destination address memcpy to the send function path (setup_create, which is called from bt_xmit). Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.5+
2016-04-13sock: tigthen lockdep checks for sock_owned_by_userHannes Frederic Sowa
sock_owned_by_user should not be used without socket lock held. It seems to be a common practice to check .owned before lock reclassification, so provide a little help to abstract this check away. Cc: linux-cifs@vger.kernel.org Cc: linux-bluetooth@vger.kernel.org Cc: linux-nfs@vger.kernel.org Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-136lowpan: change naming for lowpan private dataAlexander Aring
This patch changes the naming for interface private data for lowpan intefaces. The current private data scheme is: ------------------------------------------------- | 6LoWPAN Generic | LinkLayer 6LoWPAN | ------------------------------------------------- the current naming schemes are: - 6LoWPAN Generic: - lowpan_priv - LinkLayer 6LoWPAN: - BTLE - lowpan_dev - 802.15.4: - lowpan_dev_info the new naming scheme with this patch will be: - 6LoWPAN Generic: - lowpan_dev - LinkLayer 6LoWPAN: - BTLE - lowpan_btle_dev - 802.15.4: - lowpan_802154_dev Signed-off-by: Alexander Aring <aar@pengutronix.de> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08Bluetooth: Allow setting BT_SECURITY_FIPS with setsockoptPatrik Flykt
Update the security level check to allow setting BT_SECURITY_FIPS for an L2CAP socket. Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08Bluetooth: Ignore unknown advertising packet typesJohan Hedberg
In case of buggy controllers send advertising packet types that we don't know of we should simply ignore them instead of trying to react to them in some (potentially wrong) way. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08Bluetooth: Fix setting NO_BREDR advertising flagJohan Hedberg
If we're dealing with a single-mode controller or BR/EDR is disable for a dual-mode one, the NO_BREDR flag needs to be unconditionally present in the advertising data. This patch moves it out from behind an extra condition to be always set in the create_instance_adv_data() function if BR/EDR is disabled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-17Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "Here is the crypto update for 4.6: API: - Convert remaining crypto_hash users to shash or ahash, also convert blkcipher/ablkcipher users to skcipher. - Remove crypto_hash interface. - Remove crypto_pcomp interface. - Add crypto engine for async cipher drivers. - Add akcipher documentation. - Add skcipher documentation. Algorithms: - Rename crypto/crc32 to avoid name clash with lib/crc32. - Fix bug in keywrap where we zero the wrong pointer. Drivers: - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver. - Add PIC32 hwrng driver. - Support BCM6368 in bcm63xx hwrng driver. - Pack structs for 32-bit compat users in qat. - Use crypto engine in omap-aes. - Add support for sama5d2x SoCs in atmel-sha. - Make atmel-sha available again. - Make sahara hashing available again. - Make ccp hashing available again. - Make sha1-mb available again. - Add support for multiple devices in ccp. - Improve DMA performance in caam. - Add hashing support to rockchip" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) crypto: qat - remove redundant arbiter configuration crypto: ux500 - fix checks of error code returned by devm_ioremap_resource() crypto: atmel - fix checks of error code returned by devm_ioremap_resource() crypto: qat - Change the definition of icp_qat_uof_regtype hwrng: exynos - use __maybe_unused to hide pm functions crypto: ccp - Add abstraction for device-specific calls crypto: ccp - CCP versioning support crypto: ccp - Support for multiple CCPs crypto: ccp - Remove check for x86 family and model crypto: ccp - memset request context to zero during import lib/mpi: use "static inline" instead of "extern inline" lib/mpi: avoid assembler warning hwrng: bcm63xx - fix non device tree compatibility crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode. crypto: qat - The AE id should be less than the maximal AE number lib/mpi: Endianness fix crypto: rockchip - add hash support for crypto engine in rk3288 crypto: xts - fix compile errors crypto: doc - add skcipher API documentation crypto: doc - update AEAD AD handling ...
2016-03-11Bluetooth: Fix potential buffer overflow with Add AdvertisingJohan Hedberg
The Add Advertising command handler does the appropriate checks for the AD and Scan Response data, however fails to take into account the general length of the mgmt command itself, which could lead to potential buffer overflows. This patch adds the necessary check that the mgmt command length is consistent with the given ad and scan_rsp lengths. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-03-11Bluetooth: Fix setting correct flags in ADJohan Hedberg
A recent change added MGMT_ADV_FLAG_DISCOV to the flags returned by get_adv_instance_flags(), however failed to take into account limited discoverable mode. This patch fixes the issue by setting the correct discoverability flag in the AD data. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Increment management interface revisionJohan Hedberg
Increment the mgmt revision due to the recently added limited privacy mode. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Add support for limited privacy modeJohan Hedberg
Introduce a limited privacy mode indicated by value 0x02 to the mgmt Set Privacy command. With value 0x02 the kernel will use privacy mode with a resolvable private address. In case the controller is bondable and discoverable the identity address will be used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Fix adding discoverable to adv instance flagsJohan Hedberg
When lookup up the advertising instance flags for the default advertising instance (0) the discoverable flag should be filled in based on the HCI_DISCOVERABLE flag. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Move memset closer to where it's neededJohan Hedberg
Minor fix to not do the memset until the variable it clears is actually used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_core: cancel power off delayed work properlyWei-Ning Huang
When the HCI_AUTO_OFF flag is cleared, the power_off delayed work need to be cancel or HCI will be powered off even if it's managed. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: Use managed version of led_trigger_register in LED triggerHeiner Kallweit
Recently a managed version of led_trigger_register was introduced. Using devm_led_trigger_register allows to simplify the LED trigger code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: add LED trigger for indicating HCI is powered upHeiner Kallweit
Add support for LED triggers to the Bluetooth subsystem and add kernel config symbol BT_LEDS for it. For now one trigger for indicating "HCI is powered up" is supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-20Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skbDouglas Anderson
In commit 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") we squashed down the size of the structure by using a union with the assumption that all users would use the flag to determine whether we had a req_complete or a req_complete_skb. Unfortunately we had a case in hci_req_cmd_complete() where we weren't looking at the flag. This can result in a situation where we might be storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or vice versa. During some testing I found at least one case where the function hci_req_sync_complete() was called improperly because the kernel thought that it didn't require an SKB. Looking through the stack in kgdb I found that it was called by hci_event_packet() and that hci_event_packet() had both of its locals "req_complete" and "req_complete_skb" pointing to the same place: both to hci_req_sync_complete(). Let's make sure we always check the flag. For more details on debugging done, see <http://crbug.com/588288>. Fixes: 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29Bluetooth: Fix incorrect removing of IRKsJohan Hedberg
The commit cad20c278085d893ebd616cd20c0747a8e9d53c7 was supposed to fix handling of devices first using public addresses and then switching to RPAs after pairing. Unfortunately it missed a couple of key places in the code. 1. When evaluating which devices should be removed from the existing white list we also need to consider whether we have an IRK for them or not, i.e. a call to hci_find_irk_by_addr() is needed. 2. In smp_notify_keys() we should not be requiring the knowledge of the RPA, but should simply keep the IRK around if the other conditions require it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.4+
2016-01-29Bluetooth: L2CAP: Fix setting chan src info before adding PSM/CIDJohan Hedberg
At least the l2cap_add_psm() routine depends on the source address type being properly set to know what auto-allocation ranges to use, so the assignment to l2cap_chan needs to happen before this. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29Bluetooth: L2CAP: Fix auto-allocating LE PSM valuesJohan Hedberg
The LE dynamic PSM range is different from BR/EDR (0x0080 - 0x00ff) and doesn't have requirements relating to parity, so separate checks are needed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29Bluetooth: L2CAP: Introduce proper defines for PSM rangesJohan Hedberg
Having proper defines makes the code a bit readable, it also avoids duplicating hard-coded values since these are also needed when auto-allocating PSM values (in a subsequent patch). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-27Bluetooth: Use skcipher and hashHerbert Xu
This patch replaces uses of blkcipher with skcipher and the long obsolete hash interface with shash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-23Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packetsLukasz Duda
This patch fixes incorrect handling of the 6lowpan packets that contain uncompressed IPv6 header. RFC4944 specifies a special dispatch for 6lowpan to carry uncompressed IPv6 header. This dispatch (1 byte long) has to be removed during reception and skb data pointer has to be moved. To correctly point in the beginning of the IPv6 header the dispatch byte has to be pulled off before packet can be processed by netif_rx_in(). Test scenario: IPv6 packets are not correctly interpreted by the network layer when IPv6 header is not compressed (e.g. ICMPv6 Echo Reply is not propagated correctly to the ICMPv6 layer because the extra byte will make the header look corrupted). Similar approach is done for IEEE 802.15.4. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org # 4.4+
2016-01-23Bluetooth: 6lowpan: Fix kernel NULL pointer dereferencesGlenn Ruben Bakke
The fixes provided in this patch assigns a valid net_device structure to skb before dispatching it for further processing. Scenario #1: ============ Bluetooth 6lowpan receives an uncompressed IPv6 header, and dispatches it to netif. The following error occurs: Null pointer dereference error #1 crash log: [ 845.854013] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 845.855785] IP: [<ffffffff816e3d36>] enqueue_to_backlog+0x56/0x240 ... [ 845.909459] Call Trace: [ 845.911678] [<ffffffff816e3f64>] netif_rx_internal+0x44/0xf0 The first modification fixes the NULL pointer dereference error by assigning dev to the local_skb in order to set a valid net_device before processing the skb by netif_rx_ni(). Scenario #2: ============ Bluetooth 6lowpan receives an UDP compressed message which needs further decompression by nhc_udp. The following error occurs: Null pointer dereference error #2 crash log: [ 63.295149] BUG: unable to handle kernel NULL pointer dereference at 0000000000000840 [ 63.295931] IP: [<ffffffffc0559540>] udp_uncompress+0x320/0x626 [nhc_udp] The second modification fixes the NULL pointer dereference error by assigning dev to the local_skb in the case of a udp compressed packet. The 6lowpan udp_uncompress function expects that the net_device is set in the skb when checking lltype. Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org # 4.4+
2016-01-06Bluetooth: avoid rebuilding hci_sock all the timeJohannes Berg
Instead, allow using string formatting with send_monitor_note() and access init_utsname(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Add support for Start Limited Discovery commandJohan Hedberg
This patch implements the mgmt Start Limited Discovery command. Most of existing Start Discovery code is reused since the only difference is the presence of a 'limited' flag as part of the discovery state. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Change eir_has_data_type() to more generic eir_get_data()Johan Hedberg
To make the EIR parsing helper more general purpose, make it return the found data and its length rather than just saying whether the data was present or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-20Bluetooth: use list_for_each_entry*Geliang Tang
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15bluetooth: Validate socket address length in sco_sock_bind().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>