summaryrefslogtreecommitdiff
path: root/net/bridge
AgeCommit message (Collapse)Author
2018-08-06net/bridge/br_multicast: remove redundant variable "err"zhong jiang
The err is not modified after initalization, So remove it and make it to be void function. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03netfilter: bridge: Expose nf_tables bridge hook priorities through uapiMáté Eckl
Netfilter exposes standard hook priorities in case of ipv4, ipv6 and arp but not in case of bridge. This patch exposes the hook priority values of the bridge family (which are different from the formerly mentioned) via uapi so that they can be used by user-space applications just like the others. Signed-off-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-23net: bridge: add support for backup portNikolay Aleksandrov
This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: bridge: add support for raw sysfs port optionsNikolay Aleksandrov
This patch adds a new alternative store callback for port sysfs options which takes a raw value (buf) and can use it directly. It is needed for the backup port sysfs support since we have to pass the device by its name. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20bridge: make sure objects belong to container's ownerTyler Hicks
When creating various bridge objects in /sys/class/net/... make sure that they belong to the container's owner instead of global root (if they belong to a container/namespace). Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16netfilter: nft_reject_bridge: remove unnecessary ttl setTaehee Yoo
In the nft_reject_br_send_v4_tcp_reset(), a ttl is set by the nf_reject_iphdr_put(). so, below code is unnecessary. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Reject non-null terminated helper names from xt_CT, from Gao Feng. 2) Fix KASAN splat due to out-of-bound access from commit phase, from Alexey Kodanev. 3) Missing conntrack hook registration on IPVS FTP helper, from Julian Anastasov. 4) Incorrect skbuff allocation size in bridge nft_reject, from Taehee Yoo. 5) Fix inverted check on packet xmit to non-local addresses, also from Julian. 6) Fix ebtables alignment compat problems, from Alin Nastac. 7) Hook mask checks are not correct in xt_set, from Serhey Popovych. 8) Fix timeout listing of element in ipsets, from Jozsef. 9) Cap maximum timeout value in ipset, also from Jozsef. 10) Don't allow family option for hash:mac sets, from Florent Fourcot. 11) Restrict ebtables to work with NFPROTO_BRIDGE targets only, this Florian. 12) Another bug reported by KASAN in the rbtree set backend, from Taehee Yoo. 13) Missing __IPS_MAX_BIT update doesn't include IPS_OFFLOAD_BIT. From Gao Feng. 14) Missing initialization of match/target in ebtables, from Florian Westphal. 15) Remove useless nft_dup.h file in include path, from C. Labbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-08net: bridge: Fix locking in br_fdb_find_port()Petr Machata
Callers of br_fdb_find() need to hold the hash lock, which br_fdb_find_port() doesn't do. However, since br_fdb_find_port() is not doing any actual FDB manipulation, the hash lock is not really needed at all. So convert to br_fdb_find_rcu(), surrounded by rcu_read_lock() / _unlock() pair. The device pointer copied from inside the FDB entry is then kept alive by the RTNL lock, which br_fdb_find_port() asserts. Fixes: 4d4fd36126d6 ("net: bridge: Publish bridge accessor functions") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-08netfilter: x_tables: initialise match/target check parameter structFlorian Westphal
syzbot reports following splat: BUG: KMSAN: uninit-value in ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 xt_check_match+0x1438/0x1650 net/netfilter/x_tables.c:506 ebt_check_match net/bridge/netfilter/ebtables.c:372 [inline] ebt_check_entry net/bridge/netfilter/ebtables.c:702 [inline] The uninitialised access is xt_mtchk_param->nft_compat ... which should be set to 0. Fix it by zeroing the struct beforehand, same for tgchk. ip(6)tables targetinfo uses c99-style initialiser, so no change needed there. Reported-by: syzbot+da4494182233c23a5fcf@syzkaller.appspotmail.com Fixes: 55917a21d0cc0 ("netfilter: x_tables: add context to know if extension runs from nft_compat") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'audit-pr-20180605' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Another reasonable chunk of audit changes for v4.18, thirteen patches in total. The thirteen patches can mostly be broken down into one of four categories: general bug fixes, accessor functions for audit state stored in the task_struct, negative filter matches on executable names, and extending the (relatively) new seccomp logging knobs to the audit subsystem. The main driver for the accessor functions from Richard are the changes we're working on to associate audit events with containers, but I think they have some standalone value too so I figured it would be good to get them in now. The seccomp/audit patches from Tyler apply the seccomp logging improvements from a few releases ago to audit's seccomp logging; starting with this patchset the changes in /proc/sys/kernel/seccomp/actions_logged should apply to both the standard kernel logging and audit. As usual, everything passes the audit-testsuite and it happens to merge cleanly with your tree" [ Heh, except it had trivial merge conflicts with the SELinux tree that also came in from Paul - Linus ] * tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: Fix wrong task in comparison of session ID audit: use existing session info function audit: normalize loginuid read access audit: use new audit_context access funciton for seccomp_actions_logged audit: use inline function to set audit context audit: use inline function to get audit context audit: convert sessionid unset to a macro seccomp: Don't special case audited processes when logging seccomp: Audit attempts to modify the actions_logged sysctl seccomp: Configurable separator for the actions_logged string seccomp: Separate read and write code for actions_logged sysctl audit: allow not equal op for audit by executable audit: add syscall information to FEATURE_CHANGE records
2018-06-06netfilter: ebtables: reject non-bridge targetsFlorian Westphal
the ebtables evaluation loop expects targets to return positive values (jumps), or negative values (absolute verdicts). This is completely different from what xtables does. In xtables, targets are expected to return the standard netfilter verdicts, i.e. NF_DROP, NF_ACCEPT, etc. ebtables will consider these as jumps. Therefore reject any target found due to unspec fallback. v2: also reject watchers. ebtables ignores their return value, so a target that assumes skb ownership (and returns NF_STOLEN) causes use-after-free. The only watchers in the 'ebtables' front-end are log and nflog; both have AF_BRIDGE specific wrappers on kernel side. Reported-by: syzbot+2b43f681169a2a0d306a@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-04netfilter: ebtables: fix compat entry paddingAlin Nastac
On arm64, ebt_entry_{match,watcher,target} structs are 40 bytes long while on 32-bit arm these structs have a size of 36 bytes. COMPAT_XT_ALIGN() macro cannot be used here to determine the necessary padding for the CONFIG_COMPAT because it imposes an 8-byte boundary alignment, condition that is not found in 32-bit ebtables application. Signed-off-by: Alin Nastac <alin.nastac@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-04netfilter: nft_reject_bridge: fix skb allocation size in ↵Taehee Yoo
nft_reject_br_send_v6_unreach In order to allocate icmpv6 skb, sizeof(struct ipv6hdr) should be used. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: bridge: Notify about bridge VLANsPetr Machata
A driver might need to react to changes in settings of brentry VLANs. Therefore send switchdev port notifications for these as well. Reuse SWITCHDEV_OBJ_ID_PORT_VLAN for this purpose. Listeners should use netif_is_bridge_master() on orig_dev to determine whether the notification is about a bridge port or a bridge. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: bridge: Extract br_vlan_add_existing()Petr Machata
Extract the code that deals with adding a preexisting VLAN to bridge CPU port to a separate function. A follow-up patch introduces a need to roll back operations in this block due to an error, and this split will make the error-handling code clearer. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: bridge: Extract boilerplate around switchdev_port_obj_*()Petr Machata
A call to switchdev_port_obj_add() or switchdev_port_obj_del() involves initializing a struct switchdev_obj_port_vlan, a piece of code that repeats on each call site almost verbatim. While in the current codebase there is just one duplicated add call, the follow-up patches add more of both add and del calls. Thus to remove the duplication, extract the repetition into named functions and reuse. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25net: bridge: add support for port isolationNikolay Aleksandrov
This patch adds support for a new port flag - BR_ISOLATED. If it is set then isolated ports cannot communicate between each other, but they can still communicate with non-isolated ports. The same can be achieved via ACLs but they can't scale with large number of ports and also the complexity of the rules grows. This feature can be used to achieve isolated vlan functionality (similar to pvlan) as well, though currently it will be port-wide (for all vlans on the port). The new test in should_deliver uses data that is already cache hot and the new boolean is used to avoid an additional source port test in should_deliver. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17netfilter: ebtables: handle string from userspace with carePaolo Abeni
strlcpy() can't be safely used on a user-space provided string, as it can try to read beyond the buffer's end, if the latter is not NULL terminated. Leveraging the above, syzbot has been able to trigger the following splat: BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] BUG: KASAN: stack-out-of-bounds in ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] BUG: KASAN: stack-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504 CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285 compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367 compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline] compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156 compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279 inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041 compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901 compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050 __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:416 [inline] __se_compat_sys_setsockopt net/compat.c:413 [inline] __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413 do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline] do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fb3cb9 RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Fix the issue replacing the unsafe function with strscpy() and taking care of possible errors. Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-14audit: use inline function to get audit contextRichard Guy Briggs
Recognizing that the audit context is an internal audit value, use an access function to retrieve the audit context pointer for the task rather than reaching directly into the task struct to get it. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes] Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix handling of simultaneous open TCP connection in conntrack, from Jozsef Kadlecsik. 2) Insufficient sanitify check of xtables extension names, from Florian Westphal. 3) Skip unnecessary synchronize_rcu() call when transaction log is already empty, from Florian Westphal. 4) Incorrect destination mac validation in ebt_stp, from Stephen Hemminger. 5) xtables module reference counter leak in nft_compat, from Florian Westphal. 6) Incorrect connection reference counting logic in IPVS one-packet scheduler, from Julian Anastasov. 7) Wrong stats for 32-bits CPU in IPVS, also from Julian. 8) Calm down sparse error in netfilter core, also from Florian. 9) Use nla_strlcpy to fix compilation warning in nfnetlink_acct and nfnetlink_cthelper, again from Florian. 10) Missing module alias in icmp and icmp6 xtables extensions, from Florian Westphal. 11) Base chain statistics in nf_tables may be unset/null, from Florian. 12) Fix handling of large matchinfo size in nft_compat, this includes one preparation for before this fix. From Florian. 13) Fix bogus EBUSY error when deleting chains due to incorrect reference counting from the preparation phase of the two-phase commit protocol. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: bridge: Allow bridge master in br_vlan_get_info()Petr Machata
Mirroring offload in mlxsw needs to check that a given VLAN is allowed to ingress the bridge device. br_vlan_get_info() is the function that is used for this, however currently it only supports bridge port devices. Extend it to support bridge masters as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08netfilter: bridge: stp fix reference to uninitialized dataStephen Hemminger
The destination mac (destmac) is only valid if EBT_DESTMAC flag is set. Fix by changing the order of the comparison to look for the flag first. Reported-by: syzbot+5c06e318fc558cc27823@syzkaller.appspotmail.com Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree, more relevant updates in this batch are: 1) Add Maglev support to IPVS. Moreover, store lastest server weight in IPVS since this is needed by maglev, patches from from Inju Song. 2) Preparation works to add iptables flowtable support, patches from Felix Fietkau. 3) Hand over flows back to conntrack slow path in case of TCP RST/FIN packet is seen via new teardown state, also from Felix. 4) Add support for extended netlink error reporting for nf_tables. 5) Support for larger timeouts that 23 days in nf_tables, patch from Florian Westphal. 6) Always set an upper limit to dynamic sets, also from Florian. 7) Allow number generator to make map lookups, from Laura Garcia. 8) Use hash_32() instead of opencode hashing in IPVS, from Vicent Bernat. 9) Extend ip6tables SRH match to support previous, next and last SID, from Ahmed Abdelsalam. 10) Move Passive OS fingerprint nf_osf.c, from Fernando Fernandez. 11) Expose nf_conntrack_max through ctnetlink, from Florent Fourcot. 12) Several housekeeping patches for xt_NFLOG, x_tables and ebtables, from Taehee Yoo. 13) Unify meta bridge with core nft_meta, then make nft_meta built-in. Make rt and exthdr built-in too, again from Florian. 14) Missing initialization of tbl->entries in IPVS, from Cong Wang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Overlapping changes in selftests Makefile. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03net: bridge: Notify about !added_by_user FDB entriesPetr Machata
Do not automatically bail out on sending notifications about activity on non-user-added FDB entries. Instead, notify about this activity except for cases where the activity itself originates in a notification, to avoid sending duplicate notifications. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03switchdev: Add fdb.added_by_user to switchdev notificationsPetr Machata
The following patch enables sending notifications also for events on FDB entries that weren't added by the user. Give the drivers the information necessary to distinguish between the two origins of FDB entries. To maintain the current behavior, have switchdev-implementing drivers bail out on notifications about non-user-added FDB entries. In case of mlxsw driver, allow a call to mlxsw_sp_span_respin() so that SPAN over bridge catches up with the changed FDB. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03net: bridge: avoid duplicate notification on up/down/change netdev eventsNikolay Aleksandrov
While handling netdevice events, br_device_event() sometimes uses br_stp_(disable|enable)_port which unconditionally send a notification, but then a second notification for the same event is sent at the end of the br_device_event() function. To avoid sending duplicate notifications in such cases, check if one has already been sent (i.e. br_stp_enable/disable_port have been called). The patch is based on a change by Satish Ashok. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30net: bridge: Publish bridge accessor functionsPetr Machata
Add a couple new functions to allow querying FDB and vlan settings of a bridge. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29bridge: check iface upper dev when setting master via ioctlHangbin Liu
When we set a bond slave's master to bridge via ioctl, we only check the IFF_BRIDGE_PORT flag. Although we will find the slave's real master at netdev_master_upper_dev_link() later, it already does some settings and allocates some resources. It would be better to return as early as possible. v1 -> v2: use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev() to check if we have a master, because not all upper devs are masters, e.g. vlan device. Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27bridge: use hlist_entry_safeYueHaibing
Use hlist_entry_safe() instead of open-coding it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24netfilter: merge meta_bridge into nft_metaFlorian Westphal
It overcomplicates things for no reason. nft_meta_bridge only offers retrieval of bridge port interface name. Because of this being its own module, we had to export all nft_meta functions, which we can then make static again (which even reduces the size of nft_meta -- including bridge port retrieval...): before: text data bss dec hex filename 1838 832 0 2670 a6e net/bridge/netfilter/nft_meta_bridge.ko 6147 936 1 7084 1bac net/netfilter/nft_meta.ko after: 5826 936 1 6763 1a6b net/netfilter/nft_meta.ko Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-24netfilter: ebtables: add ebt_get_target and ebt_get_target_cTaehee Yoo
ebt_get_target similar to {ip/ip6/arp}t_get_target. and ebt_get_target_c similar to {ip/ip6/arp}t_get_target_c. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-24netfilter: ebtables: remove EBT_MATCH and EBT_NOMATCHTaehee Yoo
EBT_MATCH and EBT_NOMATCH are used to change return value. match functions(ebt_xxx.c) return false when received frame is not matched and returns true when received frame is matched. but, EBT_MATCH_ITERATE understands oppositely. so, to change return value, EBT_MATCH and EBT_NOMATCH are used. but, we can use operation '!' simply. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-24netfilter: ebtables: add ebt_free_table_info functionTaehee Yoo
A ebt_free_table_info frees all of chainstacks. It similar to xt_free_table_info. this inline function reduces code line. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-09netfilter: ebtables: don't attempt to allocate 0-sized compat arrayFlorian Westphal
Dmitry reports 32bit ebtables on 64bit kernel got broken by a recent change that returns -EINVAL when ruleset has no entries. ebtables however only counts user-defined chains, so for the initial table nentries will be 0. Don't try to allocate the compat array in this case, as no user defined rules exist no rule will need 64bit translation. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 7d7d7e02111e9 ("netfilter: compat: reject huge allocation requests") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-31net: bridge: disable bridge MTU auto tuning if it was set manuallyNikolay Aleksandrov
As Roopa noted today the biggest source of problems when configuring bridge and ports is that the bridge MTU keeps changing automatically on port events (add/del/changemtu). That leads to inconsistent behaviour and network config software needs to chase the MTU and fix it on each such event. Let's improve on that situation and allow for the user to set any MTU within ETH_MIN/MAX limits, but once manually configured it is the user's responsibility to keep it correct afterwards. In case the MTU isn't manually set - the behaviour reverts to the previous and the bridge follows the minimum MTU. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31net: bridge: set min MTU on port events and allow user to set maxNikolay Aleksandrov
Recently the bridge was changed to automatically set maximum MTU on port events (add/del/changemtu) when vlan filtering is enabled, but that actually changes behaviour in a way which breaks some setups and can lead to packet drops. In order to still allow that maximum to be set while being compatible, we add the ability for the user to tune the bridge MTU up to the maximum when vlan filtering is enabled, but that has to be done explicitly and all port events (add/del/changemtu) lead to resetting that MTU to the minimum as before. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. This batch comes with more input sanitization for xtables to address bug reports from fuzzers, preparation works to the flowtable infrastructure and assorted updates. In no particular order, they are: 1) Make sure userspace provides a valid standard target verdict, from Florian Westphal. 2) Sanitize error target size, also from Florian. 3) Validate that last rule in basechain matches underflow/policy since userspace assumes this when decoding the ruleset blob that comes from the kernel, from Florian. 4) Consolidate hook entry checks through xt_check_table_hooks(), patch from Florian. 5) Cap ruleset allocations at 512 mbytes, 134217728 rules and reject very large compat offset arrays, so we have a reasonable upper limit and fuzzers don't exercise the oom-killer. Patches from Florian. 6) Several WARN_ON checks on xtables mutex helper, from Florian. 7) xt_rateest now has a hashtable per net, from Cong Wang. 8) Consolidate counter allocation in xt_counters_alloc(), from Florian. 9) Earlier xt_table_unlock() call in {ip,ip6,arp,eb}tables, patch from Xin Long. 10) Set FLOW_OFFLOAD_DIR_* to IP_CT_DIR_* definitions, patch from Felix Fietkau. 11) Consolidate code through flow_offload_fill_dir(), also from Felix. 12) Inline ip6_dst_mtu_forward() just like ip_dst_mtu_maybe_forward() to remove a dependency with flowtable and ipv6.ko, from Felix. 13) Cache mtu size in flow_offload_tuple object, this is safe for forwarding as f87c10a8aa1e describes, from Felix. 14) Rename nf_flow_table.c to nf_flow_table_core.o, to simplify too modular infrastructure, from Felix. 15) Add rt0, rt2 and rt4 IPv6 routing extension support, patch from Ahmed Abdelsalam. 16) Remove unused parameter in nf_conncount_count(), from Yi-Hung Wei. 17) Support for counting only to nf_conncount infrastructure, patch from Yi-Hung Wei. 18) Add strict NFT_CT_{SRC_IP,DST_IP,SRC_IP6,DST_IP6} key datatypes to nft_ct. 19) Use boolean as return value from ipt_ah and from IPVS too, patch from Gustavo A. R. Silva. 20) Remove useless parameters in nfnl_acct_overquota() and nf_conntrack_broadcast_help(), from Taehee Yoo. 21) Use ipv6_addr_is_multicast() from xt_cluster, also from Taehee Yoo. 22) Statify nf_tables_obj_lookup_byhandle, patch from Fengguang Wu. 23) Fix typo in xt_limit, from Geert Uytterhoeven. 24) Do no use VLAs in Netfilter code, again from Gustavo. 25) Use ADD_COUNTER from ebtables, from Taehee Yoo. 26) Bitshift support for CONNMARK and MARK targets, from Jack Ma. 27) Use pr_*() and add pr_fmt(), from Arushi Singhal. 28) Add synproxy support to ctnetlink. 29) ICMP type and IGMP matching support for ebtables, patches from Matthias Schiffer. 30) Support for the revision infrastructure to ebtables, from Bernie Harris. 31) String match support for ebtables, also from Bernie. 32) Documentation for the new flowtable infrastructure. 33) Use generic comparison functions in ebt_stp, from Joe Perches. 34) Demodularize filter chains in nftables. 35) Register conntrack hooks in case nftables NAT chain is added. 36) Merge assignments with return in a couple of spots in the Netfilter codebase, also from Arushi. 37) Document that xtables percpu counters are stored in the same memory area, from Ben Hutchings. 38) Revert mark_source_chains() sanity checks that break existing rulesets, from Florian Westphal. 39) Use is_zero_ether_addr() in the ipset codebase, from Joe Perches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30netfilter: nf_tables: build-in filter chain typePablo Neira Ayuso
One module per supported filter chain family type takes too much memory for very little code - too much modularization - place all chain filter definitions in one single file. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: nft_register_chain_type() returns voidPablo Neira Ayuso
Use WARN_ON() instead since it should not happen that neither family goes over NFPROTO_NUMPROTO nor there is already a chain of this type already registered. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: rename struct nf_chain_typePablo Neira Ayuso
Use nft_ prefix. By when I added chain types, I forgot to use the nftables prefix. Rename enum nft_chain_type to enum nft_chain_types too, otherwise there is an overlap. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: ebt_stp: Use generic functions for comparisonsJoe Perches
Instead of unnecessary const declarations, use the generic functions to save a little object space. $ size net/bridge/netfilter/ebt_stp.o* text data bss dec hex filename 1250 144 0 1394 572 net/bridge/netfilter/ebt_stp.o.new 1344 144 0 1488 5d0 net/bridge/netfilter/ebt_stp.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: ebtables: Add support for specifying match revisionBernie Harris
Currently ebtables assumes that the revision number of all match modules is 0, which is an issue when trying to use existing xtables matches with ebtables. The solution is to modify ebtables to allow extensions to specify a revision number, similar to iptables. This gets passed down to the kernel, which is then able to find the match module correctly. To main binary backwards compatibility, the size of the ebt_entry structures is not changed, only the size of the name field is decreased by 1 byte to make room for the revision field. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>