summaryrefslogtreecommitdiff
path: root/net/ceph/osdmap.c
AgeCommit message (Collapse)Author
2021-06-03libceph: Fix spelling mistakesZheng Yongjun
Fix some spelling mistakes in comments: enconding ==> encoding ambigous ==> ambiguous orignal ==> original encyption ==> encryption Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: ceph: Fix a typo in osdmap.cLu Wei
Modify "inital" to "initial" in net/ceph/osdmap.c. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-14libceph, ceph: get and handle cluster maps with addrvecsIlya Dryomov
In preparation for msgr2, make the cluster send us maps with addrvecs including both LEGACY and MSGR2 addrs instead of a single LEGACY addr. This means advertising support for SERVER_NAUTILUS and also some older features: SERVER_MIMIC, MONENC and MONNAMES. MONNAMES and MONENC are actually pre-argonaut, we just never updated ceph_monmap_decode() for them. Decoding is unconditional, see commit 23c625ce3065 ("libceph: assume argonaut on the server side"). SERVER_MIMIC doesn't bear any meaning for the kernel client. Since ceph_decode_entity_addrvec() is guarded by encoding version checks (and in msgr2 case it is guarded implicitly by the fact that server is speaking msgr2), we assume MSG_ADDR2 for it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12libceph: multiple workspaces for CRUSH computationsIlya Dryomov
Replace a global map->crush_workspace (protected by a global mutex) with a list of workspaces, up to the number of CPUs + 1. This is based on a patch from Robin Geuze <robing@nl.team.blue>. Robin and his team have observed a 10-20% increase in IOPS on all queue depths and lower CPU usage as well on a high-end all-NVMe 100GbE cluster. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-06-01libceph: support for balanced and localized readsIlya Dryomov
OSD-side issues with reads from replica have been resolved in Octopus. Reading from replica should be safe wrt. unstable or uncommitted state now, so add support for balanced and localized reads. There are two cases when a read from replica can't be served: - OSD may silently drop the request, expecting the client to notice that the acting set has changed and resend via the usual means (handled with t->used_replica) - OSD may return EAGAIN, expecting the client to resend to the primary, ignoring replica read flags (see handle_reply()) Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-06-01libceph: crush_location infrastructureIlya Dryomov
Allow expressing client's location in terms of CRUSH hierarchy as a set of (bucket type name, bucket name) pairs. The userspace syntax "crush_location = key1=value1 key2=value2" is incompatible with mount options and needed adaptation. Key-value pairs are separated by '|' and we use ':' instead of '=' to separate keys from values. So for: crush_location = host=foo rack=bar one would write: crush_location=host:foo|rack:bar As in userspace, "multipath" locations are supported, so indicating locality for parallel hierarchies is possible: crush_location=rack:foo1|rack:foo2|datacenter:bar Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-06-01libceph: decode CRUSH device/bucket types and namesIlya Dryomov
These would be matched with the provided client location to calculate the locality value. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-06-01libceph: add non-asserting rbtree insertion helperIlya Dryomov
Needed for the next commit and useful for ceph_pg_pool_info tree as well. I'm leaving the asserting helper in for now, but we should look at getting rid of it in the future. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-03-23ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULLIlya Dryomov
CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult per-pool flags as well. Unfortunately the backwards compatibility here is lacking: - the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but was guarded by require_osd_release >= RELEASE_LUMINOUS - it was subsequently backported to luminous in v12.2.2, but that makes no difference to clients that only check OSDMAP_FULL/NEARFULL because require_osd_release is not client-facing -- it is for OSDs Since all kernels are affected, the best we can do here is just start checking both map flags and pool flags and send that to stable. These checks are best effort, so take osdc->lock and look up pool flags just once. Remove the FIXME, since filesystem quotas are checked above and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set. Cc: stable@vger.kernel.org Reported-by: Yanhu Cao <gmayyyha@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Sage Weil <sage@redhat.com>
2019-09-16libceph: use ceph_kvmalloc() for osdmap arraysIlya Dryomov
osdmap has a bunch of arrays that grow linearly with the number of OSDs. osd_state, osd_weight and osd_primary_affinity take 4 bytes per OSD. osd_addr takes 136 bytes per OSD because of sockaddr_storage. The CRUSH workspace area also grows linearly with the number of OSDs. Normally these arrays are allocated at client startup. The osdmap is usually updated in small incrementals, but once in a while a full map may need to be processed. For a cluster with 10000 OSDs, this means a bunch of 40K allocations followed by a 1.3M allocation, all of which are currently required to be physically contiguous. This results in sporadic ENOMEM errors, hanging the client. Go back to manually (re)allocating arrays and use ceph_kvmalloc() to fall back to non-contiguous allocation when necessary. Link: https://tracker.ceph.com/issues/40481 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-07-08libceph: correctly decode ADDR2 addresses in incremental OSD mapsJeff Layton
Given the new format, we have to decode the addresses twice. Once to skip past the new_up_client field, and a second time to collect the addresses. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: switch osdmap decoding to use ceph_decode_entity_addrJeff Layton
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05libceph: use struct_size() for kmalloc() in crush_decode()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kmalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-15Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The main piece is a set of libceph changes that revamps how OSD requests are aborted, improving CephFS ENOSPC handling and making "umount -f" actually work (Zheng and myself). The rest is mostly mount option handling cleanups from Chengguang and assorted fixes from Zheng, Luis and Dongsheng. * tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits) rbd: flush rbd_dev->watch_dwork after watch is unregistered ceph: update description of some mount options ceph: show ino32 if the value is different with default ceph: strengthen rsize/wsize/readdir_max_bytes validation ceph: fix alignment of rasize ceph: fix use-after-free in ceph_statfs() ceph: prevent i_version from going back ceph: fix wrong check for the case of updating link count libceph: allocate the locator string with GFP_NOFAIL libceph: make abort_on_full a per-osdc setting libceph: don't abort reads in ceph_osdc_abort_on_full() libceph: avoid a use-after-free during map check libceph: don't warn if req->r_abort_on_full is set libceph: use for_each_request() in ceph_osdc_abort_on_full() libceph: defer __complete_request() to a workqueue libceph: move more code into __complete_request() libceph: no need to call flush_workqueue() before destruction ceph: flush pending works before shutdown super ceph: abort osd requests on force umount libceph: introduce ceph_osdc_abort_requests() ...
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04libceph: allocate the locator string with GFP_NOFAILIlya Dryomov
calc_target() isn't supposed to fail with anything but POOL_DNE, in which case we report that the pool doesn't exist and fail the request with -ENOENT. Doing this for -ENOMEM is at the very least confusing and also harmful -- as the preceding requests complete, a short-lived locator string allocation is likely to succeed after a wait. (We used to call ceph_object_locator_to_pg() for a pi lookup. In theory that could fail with -ENOENT, hence the "ret != -ENOENT" warning being removed.) Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: move ceph_calc_file_object_mapping() to striper.cIlya Dryomov
ceph_calc_file_object_mapping() has nothing to do with osdmaps. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: change ceph_calc_file_object_mapping() signatureIlya Dryomov
- make it void - xlen (object extent length) out parameter should be u32 because only a single stripe unit is mapped at a time Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2018-04-02libceph: eliminate overflows in ceph_calc_file_object_mapping()Ilya Dryomov
bl, stripeno and objsetno should be u64 -- otherwise large enough files get corrupted. How large depends on file layout: - 4M-objects layout (default): any file over 16P - 64K-objects layout (smallest possible object size): any file over 512T Only CephFS is affected, rbd doesn't use ceph_calc_file_object_mapping() yet. Fortunately, CephFS has a max_file_size configurable, the default for which is way below both of the above numbers. Reimplement the logic from scratch with no layout validation -- it's done on the MDS side. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-19libceph: don't allow bidirectional swap of pg-upmap-itemsIlya Dryomov
This reverts most of commit f53b7665c8ce ("libceph: upmap semantic changes"). We need to prevent duplicates in the final result. For example, we can currently take [1,2,3] and apply [(1,2)] and get [2,2,3] or [1,2,3] and apply [(3,2)] and get [1,2,2] The rest of the system is not prepared to handle duplicates in the result set like this. The reverted piece was intended to allow [1,2,3] and [(1,2),(2,1)] to get [2,1,3] to reorder primaries. First, this bidirectional swap is hard to implement in a way that also prevents dups. For example, [1,2,3] and [(1,4),(2,3),(3,4)] would give [4,3,4] but would we just drop the last step we'd have [4,3,3] which is also invalid, etc. Simpler to just not handle bidirectional swaps. In practice, they are not needed: if you just want to choose a different primary then use primary_affinity, or pg_upmap (not pg_upmap_items). Cc: stable@vger.kernel.org # 4.13 Link: http://tracker.ceph.com/issues/21410 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01libceph: make RECOVERY_DELETES feature create a new intervalIlya Dryomov
This is needed so that the OSDs can regenerate the missing set at the start of a new interval where support for recovery deletes changed. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01libceph: upmap semantic changesIlya Dryomov
- apply both pg_upmap and pg_upmap_items - allow bidirectional swap of pg-upmap-items Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01crush: assume weight_set != null imples weight_set_size > 0Ilya Dryomov
Reflects ceph.git commit 5e8fa3e06b68fae1582c9230a3a8d1abc6146286. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-08-01libceph: fallback for when there isn't a pool-specific choose_argIlya Dryomov
There is now a fallback to a choose_arg index of -1 if there isn't a pool-specific choose_arg set. If you create a per-pool weight-set, that works for that pool. Otherwise we try the compat/default one. If that doesn't exist either, then we use the normal CRUSH weights. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-07-17libceph: use alloc_pg_mapping() in __decode_pg_upmap_items()Ilya Dryomov
... otherwise we die in insert_pg_mapping(), which wants pg->node to be empty, i.e. initialized with RB_CLEAR_NODE. Fixes: 6f428df47dae ("libceph: pg_upmap[_items] infrastructure") Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-17libceph: set -EINVAL in one place in crush_decode()Ilya Dryomov
No sooner than Dan had fixed this issue in commit 293dffaad8d5 ("libceph: NULL deref on crush_decode() error path"), I brought it back. Add a new label and set -EINVAL once, right before failing. Fixes: 278b1d709c6a ("libceph: ceph_decode_skip_* helpers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-17libceph: NULL deref on osdmap_apply_incremental() error pathDan Carpenter
There are hidden gotos in the ceph_decode_* macros. We need to set the "err" variable on these error paths otherwise we end up returning ERR_PTR(0) which is NULL. It causes NULL dereferences in the callers. Fixes: 6f428df47dae ("libceph: pg_upmap[_items] infrastructure") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [idryomov@gmail.com: similar bug in osdmap_decode(), changelog tweak] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: osd_state is 32 bits wide in luminousIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph, crush: per-pool crush_choose_arg_map for crush_do_rule()Ilya Dryomov
If there is no crush_choose_arg_map for a given pool, a NULL pointer is passed to preserve existing crush_do_rule() behavior. Reflects ceph.git commits 55fb91d64071552ea1bc65ab4ea84d3c8b73ab4b, dbe36e08be00c6519a8c89718dd47b0219c20516. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07crush: implement weight and id overrides for straw2Ilya Dryomov
bucket_straw2_choose needs to use weights that may be different from weight_items. For instance to compensate for an uneven distribution caused by a low number of values. Or to fix the probability biais introduced by conditional probabilities (see http://tracker.ceph.com/issues/15653 for more information). We introduce a weight_set for each straw2 bucket to set the desired weight for a given item at a given position. The weight of a given item when picking the first replica (first position) may be different from the weight the second replica (second position). For instance the weight matrix for a given bucket containing items 3, 7 and 13 could be as follows: position 0 position 1 item 3 0x10000 0x100000 item 7 0x40000 0x10000 item 13 0x40000 0x10000 When crush_do_rule picks the first of two replicas (position 0), item 7, 3 are four times more likely to be choosen by bucket_straw2_choose than item 13. When choosing the second replica (position 1), item 3 is ten times more likely to be choosen than item 7, 13. By default the weight_set of each bucket exactly matches the content of item_weights for each position to ensure backward compatibility. bucket_straw2_choose compares items by using their id. The same ids are also used to index buckets and they must be unique. For each item in a bucket an array of ids can be provided for placement purposes and they are used instead of the ids. If no replacement ids are provided, the legacy behavior is preserved. Reflects ceph.git commit 19537a450fd5c5a0bb8b7830947507a76db2ceca. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: apply_upmap()Ilya Dryomov
Previously, pg_to_raw_osds() didn't filter for existent OSDs because raw_to_up_osds() would filter for "up" ("up" is predicated on "exists") and raw_to_up_osds() was called directly after pg_to_raw_osds(). Now, with apply_upmap() call in there, nonexistent OSDs in pg_to_raw_osds() output can affect apply_upmap(). Introduce remove_nonexistent_osds() to deal with that. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: compute actual pgid in ceph_pg_to_up_acting_osds()Ilya Dryomov
Move raw_pg_to_pg() call out of get_temp_osds() and into ceph_pg_to_up_acting_osds(), for upcoming apply_upmap(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: pg_upmap[_items] infrastructureIlya Dryomov
pg_temp and pg_upmap encodings are the same (PG -> array of osds), except for the incremental remove: it's an empty mapping in new_pg_temp for pg_temp and a separate old_pg_upmap set for pg_upmap. (This isn't to allow for empty pg_upmap mappings -- apparently, pg_temp just wasn't looked at as an example for pg_upmap encoding.) Reuse __decode_pg_temp() for decoding pg_upmap and new_pg_upmap. __decode_pg_temp() stores into pg_temp union member, but since pg_upmap union member is identical, reading through pg_upmap later is OK. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: ceph_decode_skip_* helpersIlya Dryomov
Some of these won't be as efficient as they could be (e.g. ceph_decode_skip_set(... 32 ...) could advance by len * sizeof(u32) once instead of advancing by sizeof(u32) len times), but that's fine and not worth a bunch of extra macro code. Replace skip_name_map() with ceph_decode_skip_map as an example. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: kill __{insert,lookup,remove}_pg_mapping()Ilya Dryomov
Switch to DEFINE_RB_FUNCS2-generated {insert,lookup,erase}_pg_mapping(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: introduce and switch to decode_pg_mapping()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: don't pass pgid by valueIlya Dryomov
Make __{lookup,remove}_pg_mapping() look like their ceph_spg_mapping counterparts: take const struct ceph_pg *. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: respect RADOS_BACKOFF backoffsIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: avoid unnecessary pi lookups in calc_target()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: resend on PG splits if OSD has RESEND_ON_SPLITIlya Dryomov
Note that ceph_osd_request_target fields are updated regardless of RESEND_ON_SPLIT. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: introduce ceph_spg, ceph_pg_to_primary_shard()Ilya Dryomov
Store both raw pgid and actual spgid in ceph_osd_request_target. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: new pi->last_force_request_resendIlya Dryomov
The old (v15) pi->last_force_request_resend has been repurposed to make pre-RESEND_ON_SPLIT clients that don't check for PG splits but do obey pi->last_force_request_resend resend on splits. See ceph.git commit 189ca7ec6420 ("mon/OSDMonitor: make pre-luminous clients resend ops on split"). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07libceph: handle non-empty dest in ceph_{oloc,oid}_copy()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-23libceph: NULL deref on crush_decode() error pathDan Carpenter
If there is not enough space then ceph_decode_32_safe() does a goto bad. We need to return an error code in that situation. The current code returns ERR_PTR(0) which is NULL. The callers are not expecting that and it results in a NULL dereference. Fixes: f24e9980eb86 ("ceph: OSD client") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-07libceph: don't set weight to IN when OSD is destroyedIlya Dryomov
Since ceph.git commit 4e28f9e63644 ("osd/OSDMap: clear osd_info, osd_xinfo on osd deletion"), weight is set to IN when OSD is deleted. This changes the result of applying an incremental for clients, not just OSDs. Because CRUSH computations are obviously affected, pre-4e28f9e63644 servers disagree with post-4e28f9e63644 clients on object placement, resulting in misdirected requests. Mirrors ceph.git commit a6009d1039a55e2c77f431662b3d6cc5a8e8e63f. Fixes: 930c53286977 ("libceph: apply new_state before new_up_client on incrementals") Link: http://tracker.ceph.com/issues/19122 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-03-07libceph: fix crush_decode() for older mapsIlya Dryomov
Older (shorter) CRUSH maps too need to be finalized. Fixes: 66a0e2d579db ("crush: remove mutable part of CRUSH map") Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-20libceph: don't go through with the mapping if the PG is too wideIlya Dryomov
With EC overwrites maturing, the kernel client will be getting exposed to potentially very wide EC pools. While "min(pi->size, X)" works fine when the cluster is stable and happy, truncating OSD sets interferes with resend logic (ceph_is_new_interval(), etc). Abort the mapping if the pool is too wide, assigning the request to the homeless session. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-02-20crush: merge working data and scratchIlya Dryomov
Much like Arlo Guthrie, I decided that one big pile is better than two little piles. Reflects ceph.git commit 95c2df6c7e0b22d2ea9d91db500cf8b9441c73ba. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-20crush: remove mutable part of CRUSH mapIlya Dryomov
Then add it to the working state. It would be very nice if we didn't have to take a lock to calculate a crush placement. By moving the permutation array into the working data, we can treat the CRUSH map as immutable. Reflects ceph.git commit cbcd039651c0569551cb90d26ce27e1432671f2a. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
generated by cgit (git 2.34.1) at 2024-05-20 21:29:58 +0000