summaryrefslogtreecommitdiff
path: root/net/ceph
AgeCommit message (Collapse)Author
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-03-25libceph: fix breakage caused by multipage bvecsIlya Dryomov
A bvec can now consist of multiple physically contiguous pages. This means that bvec_iter_advance() can move to a different page while staying in the same bvec (i.e. ->bi_bvec_done != 0). The messenger works in terms of segments which can now be defined as the smaller of a bvec and a page. The "more bytes to process in this segment" condition holds only if bvec_iter_advance() leaves us in the same bvec _and_ in the same page. On next bvec (possibly in the same page) and on next page (possibly in the same bvec) we may need to set ->last_piece. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-20libceph: wait for latest osdmap in ceph_monc_blacklist_add()Ilya Dryomov
Because map updates are distributed lazily, an OSD may not know about the new blacklist for quite some time after "osd blacklist add" command is completed. This makes it possible for a blacklisted but still alive client to overwrite a post-blacklist update, resulting in data corruption. Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using the post-blacklist epoch for all post-blacklist requests ensures that all such requests "wait" for the blacklist to come into force on their respective OSDs. Cc: stable@vger.kernel.org Fixes: 6305a3b41515 ("libceph: support for blacklisting clients") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-05libceph: use struct_size() for kmalloc() in crush_decode()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kmalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-18libceph: handle an empty authorize replyIlya Dryomov
The authorize reply can be empty, for example when the ticket used to build the authorizer is too old and TAG_BADAUTHORIZER is returned from the service. Calling ->verify_authorizer_reply() results in an attempt to decrypt and validate (somewhat) random data in au->buf (most likely the signature block from calc_signature()), which fails and ends up in con_fault_finish() with !con->auth_retry. The ticket isn't invalidated and the connection is retried again and again until a new ticket is obtained from the monitor: libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry. Cc: stable@vger.kernel.org Fixes: 5c056fdc5b47 ("libceph: verify authorize reply on connect") Link: https://tracker.ceph.com/issues/20164 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2019-01-21libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()Ilya Dryomov
con_fault() can transition the connection into STANDBY right after ceph_con_keepalive() clears STANDBY in clear_standby(): libceph user thread ceph-msgr worker ceph_con_keepalive() mutex_lock(&con->mutex) clear_standby(con) mutex_unlock(&con->mutex) mutex_lock(&con->mutex) con_fault() ... if KEEPALIVE_PENDING isn't set set state to STANDBY ... mutex_unlock(&con->mutex) set KEEPALIVE_PENDING set WRITE_PENDING This triggers warnings in clear_standby() when either ceph_con_send() or ceph_con_keepalive() get to clearing STANDBY next time. I don't see a reason to condition queue_con() call on the previous value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING could have been a non-atomic flag. Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Myungho Jung <mhjungk@gmail.com>
2019-01-07libceph: allow setting abort_on_full for rbdDongsheng Yang
Introduce a new option abort_on_full, default to false. Then we can get -ENOSPC when the pool is full, or reaches quota. [ Don't show abort_on_full in /proc/mounts. ] Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26libceph: switch more to bool in ceph_tcp_sendmsg()Ilya Dryomov
Unlike in ceph_tcp_sendpage(), it's a bool. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26libceph: use MSG_SENDPAGE_NOTLAST with ceph_tcp_sendpage()Ilya Dryomov
Prevent do_tcp_sendpages() from calling tcp_push() (at least) once per page. Instead, arrange for tcp_push() to be called (at least) once per data payload. This results in more MSS-sized packets and fewer packets overall (5-10% reduction in my tests with typical OSD request sizes). See commits 2f5338442425 ("tcp: allow splice() to build full TSO packets"), 35f9c09fe9c7 ("tcp: tcp_sendpages() should call tcp_push() once") and ae62ca7b0321 ("tcp: fix MSG_SENDPAGE_NOTLAST logic") for details. Here is an example of a packet size histogram for 128K OSD requests (MSS = 1448, top 5): Before: SIZE COUNT 1448 777700 952 127915 1200 39238 1219 9806 21 5675 After: SIZE COUNT 1448 897280 21 6201 1019 2797 643 2739 376 2479 We could do slightly better by explicitly corking the socket but it's not clear it's worth it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26libceph: use sock_no_sendpage() as a fallback in ceph_tcp_sendpage()Ilya Dryomov
sock_no_sendpage() makes the code cleaner. Also, don't set MSG_EOR. sendpage doesn't act on MSG_EOR on its own, it just honors the setting from the preceding sendmsg call by looking at ->eor in tcp_skb_can_collapse_to(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26libceph: drop last_piece logic from write_partial_message_data()Ilya Dryomov
last_piece is for the last piece in the current data item, not in the entire data payload of the message. This is harmful for messages with multiple data items. On top of that, we don't need to signal the end of a data payload either because it is always followed by a footer. We used to signal "more" unconditionally, until commit fe38a2b67bc6 ("libceph: start defining message data cursor"). Part of a large series, it introduced cursor->last_piece and also mistakenly inverted the hint by passing last_piece for "more". This was corrected with commit c2cfa1940097 ("libceph: Fix ceph_tcp_sendpage()'s more boolean usage"). As it is, last_piece is not helping at all: because Nagle algorithm is disabled, for a simple message with two 512-byte data items we end up emitting three packets: front + first data item, second data item and footer. Go back to the original pre-fe38a2b67bc6 behavior -- a single packet in most cases. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-11-19libceph: fall back to sendmsg for slab pagesIlya Dryomov
skb_can_coalesce() allows coalescing neighboring slab objects into a single frag: return page == skb_frag_page(frag) && off == frag->page_offset + skb_frag_size(frag); ceph_tcp_sendpage() can be handed slab pages. One example of this is XFS: it passes down sector sized slab objects for its metadata I/O. If the kernel client is co-located on the OSD node, the skb may go through loopback and pop on the receive side with the exact same set of frags. When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy complains because the size exceeds the object's allocated size: usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes) Although skb_can_coalesce() could be taught to return false if the resulting frag would cross a slab object boundary, we already have a fallback for non-refcounted pages. Utilize it for slab pages too. Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-11-01Merge branch 'work.afs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-10-31Merge tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The highlights are: - a series that fixes some old memory allocation issues in libceph (myself). We no longer allocate memory in places where allocation failures cannot be handled and BUG when the allocation fails. - support for copy_file_range() syscall (Luis Henriques). If size and alignment conditions are met, it leverages RADOS copy-from operation. Otherwise, a local copy is performed. - a patch that reduces memory requirement of ceph_sync_read() from the size of the entire read to the size of one object (Zheng Yan). - fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis Henriques)" * tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client: (25 commits) ceph: new mount option to disable usage of copy-from op ceph: support copy_file_range file operation libceph: support the RADOS copy-from operation ceph: add non-blocking parameter to ceph_try_get_caps() libceph: check reply num_data_items in setup_request_data() libceph: preallocate message data items libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls libceph: introduce alloc_watch_request() libceph: assign cookies in linger_submit() libceph: enable fallback to ceph_msg_new() in ceph_msgpool_get() ceph: num_ops is off by one in ceph_aio_retry_work() libceph: no need to call osd_req_opcode_valid() in osd_req_encode_op() ceph: set timeout conditionally in __cap_delay_requeue libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist() libceph: introduce ceph_pagelist_alloc() libceph: osd_req_op_cls_init() doesn't need to take opcode libceph: bump CEPH_MSG_MAX_DATA_LEN ceph: only allow punch hole mode in fallocate ceph: refactor ceph_sync_read() ceph: check if LOOKUPNAME request was aborted when filling trace ...
2018-10-24iov_iter: Separate type from direction and use accessor functionsDavid Howells
In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-22libceph: support the RADOS copy-from operationLuis Henriques
Add support for performing remote object copies using the 'copy-from' operation. [ Add COPY_FROM to get_num_data_items(). ] Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: check reply num_data_items in setup_request_data()Ilya Dryomov
setup_request_data() adds message data items to both request and reply messages, but only checks request num_data_items before proceeding with the loop. This is wrong because if an op doesn't have any request data items but has a reply data item (e.g. read), a duplicate data item gets added to the message on every resend attempt. This went unnoticed for years but now that message data items are preallocated, it promptly crashes in ceph_msg_data_add(). Amend the signature to make it clear that setup_request_data() operates on both request and reply messages. Also, remove data_len assert -- we have another one in prepare_write_message(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: preallocate message data itemsIlya Dryomov
Currently message data items are allocated with ceph_msg_data_create() in setup_request_data() inside send_request(). send_request() has never been allowed to fail, so each allocation is followed by a BUG_ON: data = ceph_msg_data_create(...); BUG_ON(!data); It's been this way since support for multiple message data items was added in commit 6644ed7b7e04 ("libceph: make message data be a pointer") in 3.10. There is no reason to delay the allocation of message data items until the last possible moment and we certainly don't need a linked list of them as they are only ever appended to the end and never erased. Make ceph_msg_new2() take max_data_items and adapt the rest of the code. Reported-by: Jerry Lee <leisurelysw24@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph, rbd, ceph: move ceph_osdc_alloc_messages() callsIlya Dryomov
The current requirement is that ceph_osdc_alloc_messages() should be called after oid and oloc are known. In preparation for preallocating message data items, move ceph_osdc_alloc_messages() further down, so that it is called when OSD op codes are known. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: introduce alloc_watch_request()Ilya Dryomov
ceph_osdc_alloc_messages() call will be moved out of alloc_linger_request() in the next commit, which means that ceph_osdc_watch() will need to call ceph_osdc_alloc_messages() twice. Add a helper for that. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: assign cookies in linger_submit()Ilya Dryomov
Register lingers directly in linger_submit(). This avoids allocating memory for notify pagelist while holding osdc->lock and simplifies both callers of linger_submit(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: enable fallback to ceph_msg_new() in ceph_msgpool_get()Ilya Dryomov
ceph_msgpool_get() can fall back to ceph_msg_new() when it is asked for a message whose front portion is larger than pool->front_len. However the caller always passes 0, effectively disabling that code path. The allocation goes to the message pool and returns a message with a front that is smaller than requested, setting us up for a crash. One example of this is a directory with a large number of snapshots. If its snap context doesn't fit, we oops in encode_request_partial(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: no need to call osd_req_opcode_valid() in osd_req_encode_op()Ilya Dryomov
Any uninitialized or unknown ops will be caught by the default clause anyway. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()Ilya Dryomov
Because send_mds_reconnect() wants to send a message with a pagelist and pass the ownership to the messenger, ceph_msg_data_add_pagelist() consumes a ref which is then put in ceph_msg_data_destroy(). This makes managing pagelists in the OSD client (where they are wrapped in ceph_osd_data) unnecessarily hard because the handoff only happens in ceph_osdc_start_request() instead of when the pagelist is passed to ceph_osd_data_pagelist_init(). I counted several memory leaks on various error paths. Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in ceph_osd_data. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: introduce ceph_pagelist_alloc()Ilya Dryomov
struct ceph_pagelist cannot be embedded into anything else because it has its own refcount. Merge allocation and initialization together. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22libceph: osd_req_op_cls_init() doesn't need to take opcodeIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-09-28libceph: Remove VLA usage of skcipherKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Ilya Dryomov <idryomov@gmail.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Sage Weil <sage@redhat.com> Cc: ceph-devel@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-13crush: fix using plain integer as NULL warningYueHaibing
Fixes the following sparse warnings: net/ceph/crush/mapper.c:517:76: warning: Using plain integer as NULL pointer net/ceph/crush/mapper.c:728:68: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13libceph: remove unnecessary non NULL check for request_keyYueHaibing
request_key never return NULL,so no need do non-NULL check. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()Ilya Dryomov
Allow for extending ceph_x_authorize_reply in the future. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: check authorizer reply/challenge length before readingIlya Dryomov
Avoid scribbling over memory if the received reply/challenge is larger than the buffer supplied with the authorizer. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: implement CEPHX_V2 calculation modeIlya Dryomov
Derive the signature from the entire buffer (both AES cipher blocks) instead of using just the first half of the first block, leaving out data_crc entirely. This addresses CVE-2018-1129. Link: http://tracker.ceph.com/issues/24837 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: add authorizer challengeIlya Dryomov
When a client authenticates with a service, an authorizer is sent with a nonce to the service (ceph_x_authorize_[ab]) and the service responds with a mutation of that nonce (ceph_x_authorize_reply). This lets the client verify the service is who it says it is but it doesn't protect against a replay: someone can trivially capture the exchange and reuse the same authorizer to authenticate themselves. Allow the service to reject an initial authorizer with a random challenge (ceph_x_authorize_challenge). The client then has to respond with an updated authorizer proving they are able to decrypt the service's challenge and that the new authorizer was produced for this specific connection instance. The accepting side requires this challenge and response unconditionally if the client side advertises they have CEPHX_V2 feature bit. This addresses CVE-2018-1128. Link: http://tracker.ceph.com/issues/24836 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: factor out encrypt_authorizer()Ilya Dryomov
Will be used for encrypting both the initial and updated authorizers. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: factor out __ceph_x_decrypt()Ilya Dryomov
Will be used for decrypting the server challenge which is only preceded by ceph_x_encrypt_header. Drop struct_v check to allow for extending ceph_x_encrypt_header in the future. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: factor out __prepare_write_connect()Ilya Dryomov
Will be used for sending ceph_msg_connect with an updated authorizer, after the server challenges the initial authorizer. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: store ceph_auth_handshake pointer in ceph_connectionIlya Dryomov
We already copy authorizer_reply_buf and authorizer_reply_buf_len into ceph_connection. Factoring out __prepare_write_connect() requires two more: authorizer_buf and authorizer_buf_len. Store the pointer to the handshake in con->auth rather than piling on. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02ceph: fix whitespaceStephen Hemminger
Remove blank lines at end of file and trailing whitespace. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: use timespec64 for r_mtimeArnd Bergmann
The request mtime field is used all over ceph, and is currently represented as a 'timespec' structure in Linux. This changes it to timespec64 to allow times beyond 2038, modifying all users at the same time. [ Remove now redundant ts variable in writepage_nounlock(). ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: use timespec64 in for keepalive2 and ticket validityArnd Bergmann
ceph_con_keepalive_expired() is the last user of timespec_add() and some of the last uses of ktime_get_real_ts(). Replacing this with timespec64 based interfaces lets us remove that deprecated API. I'm introducing new ceph_encode_timespec64()/ceph_decode_timespec64() here that take timespec64 structures and convert to/from ceph_timespec, which is defined to have an unsigned 32-bit tv_sec member. This extends the range of valid times to year 2106, avoiding the year 2038 overflow. The ceph file system portion still uses the old functions for inode timestamps, this will be done separately after the VFS layer is converted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: amend "bad option arg" error messageIlya Dryomov
Don't mention "mount" -- in the rbd case it is "mapping". Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: stop parsing when a bad int arg is detectedChengguang Xu
There is no reason to continue option parsing after detecting bad option. [ Return match_int() errors from ceph_parse_options() to match the behaviour of parse_rbd_opts_token() and parse_fsopt_token(). ] Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: make ceph_osdc_notify{,_ack}() payload_len u32Ilya Dryomov
The wire format dictates that payload_len fits into 4 bytes. Take u32 instead of size_t to reflect that. All callers pass a small integer, so no changes required. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-15Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The main piece is a set of libceph changes that revamps how OSD requests are aborted, improving CephFS ENOSPC handling and making "umount -f" actually work (Zheng and myself). The rest is mostly mount option handling cleanups from Chengguang and assorted fixes from Zheng, Luis and Dongsheng. * tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits) rbd: flush rbd_dev->watch_dwork after watch is unregistered ceph: update description of some mount options ceph: show ino32 if the value is different with default ceph: strengthen rsize/wsize/readdir_max_bytes validation ceph: fix alignment of rasize ceph: fix use-after-free in ceph_statfs() ceph: prevent i_version from going back ceph: fix wrong check for the case of updating link count libceph: allocate the locator string with GFP_NOFAIL libceph: make abort_on_full a per-osdc setting libceph: don't abort reads in ceph_osdc_abort_on_full() libceph: avoid a use-after-free during map check libceph: don't warn if req->r_abort_on_full is set libceph: use for_each_request() in ceph_osdc_abort_on_full() libceph: defer __complete_request() to a workqueue libceph: move more code into __complete_request() libceph: no need to call flush_workqueue() before destruction ceph: flush pending works before shutdown super ceph: abort osd requests on force umount libceph: introduce ceph_osdc_abort_requests() ...
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge tag 'overflow-v4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04libceph: allocate the locator string with GFP_NOFAILIlya Dryomov
calc_target() isn't supposed to fail with anything but POOL_DNE, in which case we report that the pool doesn't exist and fail the request with -ENOENT. Doing this for -ENOMEM is at the very least confusing and also harmful -- as the preceding requests complete, a short-lived locator string allocation is likely to succeed after a wait. (We used to call ceph_object_locator_to_pg() for a pi lookup. In theory that could fail with -ENOENT, hence the "ret != -ENOENT" warning being removed.) Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04libceph: make abort_on_full a per-osdc settingIlya Dryomov
The intent behind making it a per-request setting was that it would be set for writes, but not for reads. As it is, the flag is set for all fs/ceph requests except for pool perm check stat request (technically a read). ceph_osdc_abort_on_full() skips reads since the previous commit and I don't see a use case for marking individual requests. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>