summaryrefslogtreecommitdiff
path: root/net/ceph
AgeCommit message (Collapse)Author
2019-09-16libceph: use ceph_kvmalloc() for osdmap arraysIlya Dryomov
osdmap has a bunch of arrays that grow linearly with the number of OSDs. osd_state, osd_weight and osd_primary_affinity take 4 bytes per OSD. osd_addr takes 136 bytes per OSD because of sockaddr_storage. The CRUSH workspace area also grows linearly with the number of OSDs. Normally these arrays are allocated at client startup. The osdmap is usually updated in small incrementals, but once in a while a full map may need to be processed. For a cluster with 10000 OSDs, this means a bunch of 40K allocations followed by a 1.3M allocation, all of which are currently required to be physically contiguous. This results in sporadic ENOMEM errors, hanging the client. Go back to manually (re)allocating arrays and use ceph_kvmalloc() to fall back to non-contiguous allocation when necessary. Link: https://tracker.ceph.com/issues/40481 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-09-16libceph: avoid a __vmalloc() deadlock in ceph_kvmalloc()Ilya Dryomov
The vmalloc allocator doesn't fully respect the specified gfp mask: while the actual pages are allocated as requested, the page table pages are always allocated with GFP_KERNEL. ceph_kvmalloc() may be called with GFP_NOFS and GFP_NOIO (for ceph and rbd respectively), so this may result in a deadlock. There is no real reason for the current PAGE_ALLOC_COSTLY_ORDER logic, it's just something that seemed sensible at the time (ceph_kvmalloc() predates kvmalloc()). kvmalloc() is smarter: in an attempt to reduce long term fragmentation, it first tries to kmalloc non-disruptively. Switch to kvmalloc() and set the respective PF_MEMALLOC_* flag using the scope API to avoid the deadlock. Note that kvmalloc() needs to be passed GFP_KERNEL to enable the fallback. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-09-16libceph: drop unused con parameter of calc_target()Ilya Dryomov
This bit was omitted from a561372405cf ("libceph: fix PG split vs OSD (re)connect race") to avoid backport conflicts. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16libceph: handle OSD op ceph_pagelist_append() errorsDavid Disseldorp
osd_req_op_cls_init() and osd_req_op_xattr_init() currently propagate ceph_pagelist_alloc() ENOMEM errors but ignore ceph_pagelist_append() memory allocation failures. Add these checks and cleanup on error. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16libceph: add function that clears osd client's abort_errYan, Zheng
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16libceph: add function that reset client's entity addrYan, Zheng
This function also re-open connections to OSD/MON, and re-send in-flight OSD requests after re-opening connections to OSD. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-28libceph: don't call crypto_free_sync_skcipher() on a NULL tfmJia-Ju Bai
In set_secret(), key->tfm is assigned to NULL on line 55, and then ceph_crypto_key_destroy(key) is executed. ceph_crypto_key_destroy(key) crypto_free_sync_skcipher(key->tfm) crypto_free_skcipher(&tfm->base); This happens to work because crypto_sync_skcipher is a trivial wrapper around crypto_skcipher: &tfm->base is still 0 and crypto_free_skcipher() handles that. Let's not rely on the layout of crypto_sync_skcipher. This bug is found by a static analysis tool STCheck written by us. Fixes: 69d6302b65a8 ("libceph: Remove VLA usage of skcipher"). Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-22libceph: fix PG split vs OSD (re)connect raceIlya Dryomov
We can't rely on ->peer_features in calc_target() because it may be called both when the OSD session is established and open and when it's not. ->peer_features is not valid unless the OSD session is open. If this happens on a PG split (pg_num increase), that could mean we don't resend a request that should have been resent, hanging the client indefinitely. In userspace this was fixed by looking at require_osd_release and get_xinfo[osd].features fields of the osdmap. However these fields belong to the OSD section of the osdmap, which the kernel doesn't decode (only the client section is decoded). Instead, let's drop this feature check. It effectively checks for luminous, so only pre-luminous OSDs would be affected in that on a PG split the kernel might resend a request that should not have been resent. Duplicates can occur in other scenarios, so both sides should already be prepared for them: see dup/replay logic on the OSD side and retry_attempt check on the client side. Cc: stable@vger.kernel.org Fixes: 7de030d6b10a ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT") Link: https://tracker.ceph.com/issues/41162 Reported-by: Jerry Lee <leisurelysw24@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Jerry Lee <leisurelysw24@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-07-18Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "Lots of exciting things this time! - support for rbd object-map and fast-diff features (myself). This will speed up reads, discards and things like snap diffs on sparse images. - ceph.snap.btime vxattr to expose snapshot creation time (David Disseldorp). This will be used to integrate with "Restore Previous Versions" feature added in Windows 7 for folks who reexport ceph through SMB. - security xattrs for ceph (Zheng Yan). Only selinux is supported for now due to the limitations of ->dentry_init_security(). - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff Layton). This is actually a single feature bit which was missing because of the filesystem pieces. With this in, the kernel client will finally be reported as "luminous" by "ceph features" -- it is still being reported as "jewel" even though all required Luminous features were implemented in 4.13. - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention with xattrs is to not terminate and this was causing inconsistencies with ceph-fuse. - change filesystem time granularity from 1 us to 1 ns, again fixing an inconsistency with ceph-fuse (Luis Henriques). On top of this there are some additional dentry name handling and cap flushing fixes from Zheng. Finally, Jeff is formally taking over for Zheng as the filesystem maintainer" * tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits) ceph: fix end offset in truncate_inode_pages_range call ceph: use generic_delete_inode() for ->drop_inode ceph: use ceph_evict_inode to cleanup inode's resource ceph: initialize superblock s_time_gran to 1 MAINTAINERS: take over for Zheng as CephFS kernel client maintainer rbd: setallochint only if object doesn't exist rbd: support for object-map and fast-diff rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe() libceph: export osd_req_op_data() macro libceph: change ceph_osdc_call() to take page vector for response libceph: bump CEPH_MSG_MAX_DATA_LEN (again) rbd: new exclusive lock wait/wake code rbd: quiescing lock should wait for image requests rbd: lock should be quiesced on reacquire rbd: introduce copyup state machine rbd: rename rbd_obj_setup_*() to rbd_obj_init_*() rbd: move OSD request allocation into object request state machines rbd: factor out __rbd_osd_setup_discard_ops() rbd: factor out rbd_osd_setup_copyup() rbd: introduce obj_req->osd_reqs list ...
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-10Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-08Merge tag 'keys-acl-20190703' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring ACL support from David Howells: "This changes the permissions model used by keys and keyrings to be based on an internal ACL by the following means: - Replace the permissions mask internally with an ACL that contains a list of ACEs, each with a specific subject with a permissions mask. Potted default ACLs are available for new keys and keyrings. ACE subjects can be macroised to indicate the UID and GID specified on the key (which remain). Future commits will be able to add additional subject types, such as specific UIDs or domain tags/namespaces. Also split a number of permissions to give finer control. Examples include splitting the revocation permit from the change-attributes permit, thereby allowing someone to be granted permission to revoke a key without allowing them to change the owner; also the ability to join a keyring is split from the ability to link to it, thereby stopping a process accessing a keyring by joining it and thus acquiring use of possessor permits. - Provide a keyctl to allow the granting or denial of one or more permits to a specific subject. Direct access to the ACL is not granted, and the ACL cannot be viewed" * tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Provide KEYCTL_GRANT_PERMISSION keys: Replace uid/gid/perm permissions checking with an ACL
2019-07-08Merge tag 'keys-namespace-20190627' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring namespacing from David Howells: "These patches help make keys and keyrings more namespace aware. Firstly some miscellaneous patches to make the process easier: - Simplify key index_key handling so that the word-sized chunks assoc_array requires don't have to be shifted about, making it easier to add more bits into the key. - Cache the hash value in the key so that we don't have to calculate on every key we examine during a search (it involves a bunch of multiplications). - Allow keying_search() to search non-recursively. Then the main patches: - Make it so that keyring names are per-user_namespace from the point of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not accessible cross-user_namespace. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this. - Move the user and user-session keyrings to the user_namespace rather than the user_struct. This prevents them propagating directly across user_namespaces boundaries (ie. the KEY_SPEC_* flags will only pick from the current user_namespace). - Make it possible to include the target namespace in which the key shall operate in the index_key. This will allow the possibility of multiple keys with the same description, but different target domains to be held in the same keyring. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this. - Make it so that keys are implicitly invalidated by removal of a domain tag, causing them to be garbage collected. - Institute a network namespace domain tag that allows keys to be differentiated by the network namespace in which they operate. New keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned the network domain in force when they are created. - Make it so that the desired network namespace can be handed down into the request_key() mechanism. This allows AFS, NFS, etc. to request keys specific to the network namespace of the superblock. This also means that the keys in the DNS record cache are thenceforth namespaced, provided network filesystems pass the appropriate network namespace down into dns_query(). For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other cache keyrings, such as idmapper keyrings, also need to set the domain tag - for which they need access to the network namespace of the superblock" * tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Pass the network namespace into request_key mechanism keys: Network namespace domain tag keys: Garbage collect keys for which the domain has been removed keys: Include target namespace in match criteria keys: Move the user and user-session keyrings to the user_namespace keys: Namespace keyring names keys: Add a 'recurse' flag for keyring searches keys: Cache the hash value to avoid lots of recalculation keys: Simplify key description management
2019-07-08rbd: support for object-map and fast-diffIlya Dryomov
Speed up reads, discards and zeroouts through RBD_OBJ_FLAG_MAY_EXIST and RBD_OBJ_FLAG_NOOP_FOR_NONEXISTENT based on object map. Invalid object maps are not trusted, but still updated. Note that we never iterate, resize or invalidate object maps. If object-map feature is enabled but object map fails to load, we just fail the requester (either "rbd map" or I/O, by way of post-acquire action). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: export osd_req_op_data() macroIlya Dryomov
We already have one exported wrapper around it for extent.osd_data and rbd_object_map_update_finish() needs another one for cls.request_data. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-07-08libceph: change ceph_osdc_call() to take page vector for responseIlya Dryomov
This will be used for loading object map. rbd_obj_read_sync() isn't suitable because object map must be accessed through class methods. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2019-07-08libceph: rename r_unsafe_item to r_private_itemIlya Dryomov
This list item remained from when we had safe and unsafe replies (commit vs ack). It has since become a private list item for use by clients. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: rename ceph_encode_addr to ceph_encode_banner_addrJeff Layton
...ditto for the decode function. We only use these functions to fix up banner addresses now, so let's name them more appropriately. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: use TYPE_LEGACY for entity addrs instead of TYPE_NONEJeff Layton
Going forward, we'll have different address types so let's use the addr2 TYPE_LEGACY for internal tracking rather than TYPE_NONE. Also, make ceph_pr_addr print the address type value as well. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: fix decode_locker to use ceph_decode_entity_addrJeff Layton
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: correctly decode ADDR2 addresses in incremental OSD mapsJeff Layton
Given the new format, we have to decode the addresses twice. Once to skip past the new_up_client field, and a second time to collect the addresses. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: fix watch_item_t decoding to use ceph_decode_entity_addrJeff Layton
While we're in there, let's also fix up the decoder to do proper bounds checking. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: switch osdmap decoding to use ceph_decode_entity_addrJeff Layton
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: ADDR2 support for monmapJeff Layton
Switch the MonMap decoder to use the new decoding routine for entity_addr_t's. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: add ceph_decode_entity_addrJeff Layton
Add a function for decoding an entity_addr_t. Once CEPH_FEATURE_MSG_ADDR2 is enabled, the server daemons will start encoding entity_addr_t differently. Add a new helper function that can handle either format. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: fix sa_family just after reading addressJeff Layton
It doesn't make sense to leave it undecoded until later. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08libceph: remove ceph_get_direct_page_vector()Christoph Hellwig
This function is entirely unused. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-03ceph: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. This cleanup allows the return value of the functions to be made void, as no logic should care if these files succeed or not. Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Sage Weil <sage@redhat.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: ceph-devel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-27keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27keys: Pass the network namespace into request_key mechanismDavid Howells
Create a request_key_net() function and use it to pass the network namespace domain tag into DNS revolver keys and rxrpc/AFS keys so that keys for different domains can coexist in the same keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 268Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 46 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141334.135501091@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'afs-fixes-20190516' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull misc AFS fixes from David Howells: "This fixes a set of miscellaneous issues in the afs filesystem, including: - leak of keys on file close. - broken error handling in xattr functions. - missing locking when updating VL server list. - volume location server DNS lookup whereby preloaded cells may not ever get a lookup and regular DNS lookups to maintain server lists consume power unnecessarily. - incorrect error propagation and handling in the fileserver iteration code causes operations to sometimes apparently succeed. - interruption of server record check/update side op during fileserver iteration causes uninterruptible main operations to fail unexpectedly. - callback promise expiry time miscalculation. - over invalidation of the callback promise on directories. - double locking on callback break waking up file locking waiters. - double increment of the vnode callback break counter. Note that it makes some changes outside of the afs code, including: - an extra parameter to dns_query() to allow the dns_resolver key just accessed to be immediately invalidated. AFS is caching the results itself, so the key can be discarded. - an interruptible version of wait_var_event(). - an rxrpc function to allow the maximum lifespan to be set on a call. - a way for an rxrpc call to be marked as non-interruptible" * tag 'afs-fixes-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix double inc of vnode->cb_break afs: Fix lock-wait/callback-break double locking afs: Don't invalidate callback if AFS_VNODE_DIR_VALID not set afs: Fix calculation of callback expiry time afs: Make dynamic root population wait uninterruptibly for proc_cells_lock afs: Make some RPC operations non-interruptible rxrpc: Allow the kernel to mark a call as being non-interruptible afs: Fix error propagation from server record check/update afs: Fix the maximum lifespan of VL and probe calls rxrpc: Provide kernel interface to set max lifespan on a call afs: Fix "kAFS: AFS vnode with undefined type 0" afs: Fix cell DNS lookup Add wait_var_event_interruptible() dns_resolver: Allow used keys to be invalidated afs: Fix afs_cell records to always have a VL server list record afs: Fix missing lock when replacing VL server list afs: Fix afs_xattr_get_yfs() to not try freeing an error value afs: Fix incorrect error handling in afs_xattr_get_acl() afs: Fix key leak in afs_release() and afs_evict_inode()
2019-05-16Merge tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "On the filesystem side we have: - a fix to enforce quotas set above the mount point (Luis Henriques) - support for exporting snapshots through NFS (Zheng Yan) - proper statx implementation (Jeff Layton). statx flags are mapped to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account. - some follow-up dentry name handling fixes, in particular elimination of our hand-rolled helper and the switch to __getname() as suggested by Al (Jeff Layton) - a set of MDS client cleanups in preparation for async MDS requests in the future (Jeff Layton) - a fix to sync the filesystem before remounting (Jeff Layton) On the rbd side, work is on-going on object-map and fast-diff image features" * tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits) ceph: flush dirty inodes before proceeding with remount ceph: fix unaligned access in ceph_send_cap_releases libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer libceph: fix unaligned accesses in ceph_entity_addr handling rbd: don't assert on writes to snapshots rbd: client_mutex is never nested ceph: print inode number in __caps_issued_mask debugging messages ceph: just call get_session in __ceph_lookup_mds_session ceph: simplify arguments and return semantics of try_get_cap_refs ceph: fix comment over ceph_drop_caps_for_unlink ceph: move wait for mds request into helper function ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request ceph: after an MDS request, do callback and completions ceph: use pathlen values returned by set_request_path_attr ceph: use __getname/__putname in ceph_mdsc_build_path ceph: use ceph_mdsc_build_path instead of clone_dentry_name ceph: fix potential use-after-free in ceph_mdsc_build_path ceph: dump granular cap info in "caps" debugfs file ceph: make iterate_session_caps a public symbol ceph: fix NULL pointer deref when debugging is enabled ...
2019-05-15dns_resolver: Allow used keys to be invalidatedDavid Howells
Allow used DNS resolver keys to be invalidated after use if the caller is doing its own caching of the results. This reduces the amount of resources required. Fix AFS to invalidate DNS results to kill off permanent failure records that get lodged in the resolver keyring and prevent future lookups from happening. Fixes: 0a5143f2f89c ("afs: Implement VL server rotation") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07libceph: make ceph_pr_addr take an struct ceph_entity_addr pointerJeff Layton
GCC9 is throwing a lot of warnings about unaligned accesses by callers of ceph_pr_addr. All of the current callers are passing a pointer to the sockaddr inside struct ceph_entity_addr. Fix it to take a pointer to a struct ceph_entity_addr instead, and then have the function make a copy of the sockaddr before printing it. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07libceph: fix unaligned accesses in ceph_entity_addr handlingJeff Layton
GCC9 is throwing a lot of warnings about unaligned access. This patch fixes some of them by changing most of the sockaddr handling functions to take a pointer to struct ceph_entity_addr instead of struct sockaddr_storage. The lower functions can then make copies or do unaligned accesses as needed. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-03-25libceph: fix breakage caused by multipage bvecsIlya Dryomov
A bvec can now consist of multiple physically contiguous pages. This means that bvec_iter_advance() can move to a different page while staying in the same bvec (i.e. ->bi_bvec_done != 0). The messenger works in terms of segments which can now be defined as the smaller of a bvec and a page. The "more bytes to process in this segment" condition holds only if bvec_iter_advance() leaves us in the same bvec _and_ in the same page. On next bvec (possibly in the same page) and on next page (possibly in the same bvec) we may need to set ->last_piece. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-20libceph: wait for latest osdmap in ceph_monc_blacklist_add()Ilya Dryomov
Because map updates are distributed lazily, an OSD may not know about the new blacklist for quite some time after "osd blacklist add" command is completed. This makes it possible for a blacklisted but still alive client to overwrite a post-blacklist update, resulting in data corruption. Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using the post-blacklist epoch for all post-blacklist requests ensures that all such requests "wait" for the blacklist to come into force on their respective OSDs. Cc: stable@vger.kernel.org Fixes: 6305a3b41515 ("libceph: support for blacklisting clients") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-05libceph: use struct_size() for kmalloc() in crush_decode()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kmalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-18libceph: handle an empty authorize replyIlya Dryomov
The authorize reply can be empty, for example when the ticket used to build the authorizer is too old and TAG_BADAUTHORIZER is returned from the service. Calling ->verify_authorizer_reply() results in an attempt to decrypt and validate (somewhat) random data in au->buf (most likely the signature block from calc_signature()), which fails and ends up in con_fault_finish() with !con->auth_retry. The ticket isn't invalidated and the connection is retried again and again until a new ticket is obtained from the monitor: libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply libceph: osd2 192.168.122.1:6809 bad authorize reply Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry. Cc: stable@vger.kernel.org Fixes: 5c056fdc5b47 ("libceph: verify authorize reply on connect") Link: https://tracker.ceph.com/issues/20164 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2019-01-21libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()Ilya Dryomov
con_fault() can transition the connection into STANDBY right after ceph_con_keepalive() clears STANDBY in clear_standby(): libceph user thread ceph-msgr worker ceph_con_keepalive() mutex_lock(&con->mutex) clear_standby(con) mutex_unlock(&con->mutex) mutex_lock(&con->mutex) con_fault() ... if KEEPALIVE_PENDING isn't set set state to STANDBY ... mutex_unlock(&con->mutex) set KEEPALIVE_PENDING set WRITE_PENDING This triggers warnings in clear_standby() when either ceph_con_send() or ceph_con_keepalive() get to clearing STANDBY next time. I don't see a reason to condition queue_con() call on the previous value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING could have been a non-atomic flag. Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Myungho Jung <mhjungk@gmail.com>
2019-01-07libceph: allow setting abort_on_full for rbdDongsheng Yang
Introduce a new option abort_on_full, default to false. Then we can get -ENOSPC when the pool is full, or reaches quota. [ Don't show abort_on_full in /proc/mounts. ] Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26libceph: switch more to bool in ceph_tcp_sendmsg()Ilya Dryomov
Unlike in ceph_tcp_sendpage(), it's a bool. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26libceph: use MSG_SENDPAGE_NOTLAST with ceph_tcp_sendpage()Ilya Dryomov
Prevent do_tcp_sendpages() from calling tcp_push() (at least) once per page. Instead, arrange for tcp_push() to be called (at least) once per data payload. This results in more MSS-sized packets and fewer packets overall (5-10% reduction in my tests with typical OSD request sizes). See commits 2f5338442425 ("tcp: allow splice() to build full TSO packets"), 35f9c09fe9c7 ("tcp: tcp_sendpages() should call tcp_push() once") and ae62ca7b0321 ("tcp: fix MSG_SENDPAGE_NOTLAST logic") for details. Here is an example of a packet size histogram for 128K OSD requests (MSS = 1448, top 5): Before: SIZE COUNT 1448 777700 952 127915 1200 39238 1219 9806 21 5675 After: SIZE COUNT 1448 897280 21 6201 1019 2797 643 2739 376 2479 We could do slightly better by explicitly corking the socket but it's not clear it's worth it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-26libceph: use sock_no_sendpage() as a fallback in ceph_tcp_sendpage()Ilya Dryomov
sock_no_sendpage() makes the code cleaner. Also, don't set MSG_EOR. sendpage doesn't act on MSG_EOR on its own, it just honors the setting from the preceding sendmsg call by looking at ->eor in tcp_skb_can_collapse_to(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>