summaryrefslogtreecommitdiff
path: root/net/dsa/Kconfig
AgeCommit message (Collapse)Author
2019-09-12net: dsa: microchip: remove NET_DSA_TAG_KSZ_COMMONGeorge McCollister
Remove the superfluous NET_DSA_TAG_KSZ_COMMON and just use the existing NET_DSA_TAG_KSZ. Update the description to mention the three switch families it supports. No functional change. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: dsa: ksz: Drop NET_DSA_TAG_KSZ9477Marek Vasut
This Kconfig option is unused, drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-13net: dsa: tag_sja1105: Select CONFIG_PACKINGVladimir Oltean
The packing facility is needed to decode Ethernet meta frames containing source port and RX timestamping information. The DSA driver selects CONFIG_PACKING, but the tagger did not, and since taggers can be now compiled as modules independently from the drivers themselves, this is an issue now, as CONFIG_PACKING is disabled by default on all architectures. Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05net: dsa: sja1105: Add support for traffic through standalone portsVladimir Oltean
In order to support this, we are creating a make-shift switch tag out of a VLAN trunk configured on the CPU port. Termination of normal traffic on switch ports only works when not under a vlan_filtering bridge. Termination of management (PTP, BPDU) traffic works under all circumstances because it uses a different tagging mechanism (incl_srcpt). We are making use of the generic CONFIG_NET_DSA_TAG_8021Q code and leveraging it from our own CONFIG_NET_DSA_TAG_SJA1105. There are two types of traffic: regular and link-local. The link-local traffic received on the CPU port is trapped from the switch's regular forwarding decisions because it matched one of the two DMAC filters for management traffic. On transmission, the switch requires special massaging for these link-local frames. Due to a weird implementation of the switching IP, by default it drops link-local frames that originate on the CPU port. It needs to be told where to forward them to, through an SPI command ("management route") that is valid for only a single frame. So when we're sending link-local traffic, we are using the dsa_defer_xmit mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Optional VLAN-based port separation for switches without taggingVladimir Oltean
This patch provides generic DSA code for using VLAN (802.1Q) tags for the same purpose as a dedicated switch tag for injection/extraction. It is based on the discussions and interest that has been so far expressed in https://www.spinics.net/lists/netdev/msg556125.html. Unlike all other DSA-supported tagging protocols, CONFIG_NET_DSA_TAG_8021Q does not offer a complete solution for drivers (nor can it). Instead, it provides generic code that driver can opt into calling: - dsa_8021q_xmit: Inserts a VLAN header with the specified contents. Can be called from another tagging protocol's xmit function. Currently the LAN9303 driver is inserting headers that are simply 802.1Q with custom fields, so this is an opportunity for code reuse. - dsa_8021q_rcv: Retrieves the TPID and TCI from a VLAN-tagged skb. Removing the VLAN header is left as a decision for the caller to make. - dsa_port_setup_8021q_tagging: For each user port, installs an Rx VID and a Tx VID, for proper untagged traffic identification on ingress and steering on egress. Also sets up the VLAN trunk on the upstream (CPU or DSA) port. Drivers are intentionally left to call this function explicitly, depending on the context and hardware support. The expected switch behavior and VLAN semantics should not be violated under any conditions. That is, after calling dsa_port_setup_8021q_tagging, the hardware should still pass all ingress traffic, be it tagged or untagged. For uniformity with the other tagging protocols, a module for the dsa_8021q_netdev_ops structure is registered, but the typical usage is to set up another tagging protocol which selects CONFIG_NET_DSA_TAG_8021Q, and calls the API from tag_8021q.h. Null function definitions are also provided so that a "depends on" is not forced in the Kconfig. This tagging protocol only works when switch ports are standalone, or when they are added to a VLAN-unaware bridge. It will probably remain this way for the reasons below. When added to a bridge that has vlan_filtering 1, the bridge core will install its own VLANs and reset the pvids through switchdev. For the bridge core, switchdev is a write-only pipe. All VLAN-related state is kept in the bridge core and nothing is read from DSA/switchdev or from the driver. So the bridge core will break this port separation because it will install the vlan_default_pvid into all switchdev ports. Even if we could teach the bridge driver about switchdev preference of a certain vlan_default_pvid (task difficult in itself since the current setting is per-bridge but we would need it per-port), there would still exist many other challenges. Firstly, in the DSA rcv callback, a driver would have to perform an iterative reverse lookup to find the correct switch port. That is because the port is a bridge slave, so its Rx VID (port PVID) is subject to user configuration. How would we ensure that the user doesn't reset the pvid to a different value (which would make an O(1) translation impossible), or to a non-unique value within this DSA switch tree (which would make any translation impossible)? Finally, not all switch ports are equal in DSA, and that makes it difficult for the bridge to be completely aware of this anyway. The CPU port needs to transmit tagged packets (VLAN trunk) in order for the DSA rcv code to be able to decode source information. But the bridge code has absolutely no idea which switch port is the CPU port, if nothing else then just because there is no netdevice registered by DSA for the CPU port. Also DSA does not currently allow the user to specify that they want the CPU port to do VLAN trunking anyway. VLANs are added to the CPU port using the same flags as they were added on the user port. So the VLANs installed by dsa_port_setup_8021q_tagging per driver request should remain private from the bridge's and user's perspective, and should not alter the VLAN semantics observed by the user. In the current implementation a VLAN range ending at 4095 (VLAN_N_VID) is reserved for this purpose. Each port receives a unique Rx VLAN and a unique Tx VLAN. Separate VLANs are needed for Rx and Tx because they serve different purposes: on Rx the switch must process traffic as untagged and process it with a port-based VLAN, but with care not to hinder bridging. On the other hand, the Tx VLAN is where the reachability restrictions are imposed, since by tagging frames in the xmit callback we are telling the switch onto which port to steer the frame. Some general guidance on how this support might be employed for real-life hardware (some comments made by Florian Fainelli): - If the hardware supports VLAN tag stacking, it should somehow back up its private VLAN settings when the bridge tries to override them. Then the driver could re-apply them as outer tags. Dedicating an outer tag per bridge device would allow identical inner tag VID numbers to co-exist, yet preserve broadcast domain isolation. - If the switch cannot handle VLAN tag stacking, it should disable this port separation when added as slave to a vlan_filtering bridge, in that case having reduced functionality. - Drivers for old switches that don't support the entire VLAN_N_VID range will need to rework the current range selection mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Remove legacy probing supportAndrew Lunn
Now that all drivers can be probed using more traditional methods, remove the legacy probe code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28dsa: Allow tag drivers to be built as modulesAndrew Lunn
Make the CONFIG symbols tristate and add help text. The broadcom and Microchip KSZ tag drivers support two different tagging protocols in one driver. Add a configuration option for the drivers, and then options to select the protocol. Create a submenu for the tagging drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: tab/space cleanup Help text wording NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden v3: More tabification Punctuation v4: trailler->trailer Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24net: devlink: select NET_DEVLINK from driversJiri Pirko
Some drivers are becoming more dependent on NET_DEVLINK being selected in configuration. With upcoming compat functions, the behavior would be wrong in case devlink was not compiled in. So make the drivers select NET_DEVLINK and rely on the functions being there, not just stubs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26net: devlink: turn devlink into a built-inJakub Kicinski
Being able to build devlink as a module causes growing pains. First all drivers had to add a meta dependency to make sure they are not built in when devlink is built as a module. Now we are struggling to invoke ethtool compat code reliably. Make devlink code built-in, users can still not build it at all but the dynamically loadable module option is removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: dsa: ksz: Rename NET_DSA_TAG_KSZ to _KSZ9477Tristram Ha
Rename the tag Kconfig option and related macros in preparation for addition of new KSZ family switches with different tag formats. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13net: dsa: Add Lantiq / Intel GSWIP tag supportHauke Mehrtens
This handles the tag added by the PMAC on the VRX200 SoC line. The GSWIP uses internally a GSWIP special tag which is located after the Ethernet header. The PMAC which connects the GSWIP to the CPU converts this special tag used by the GSWIP into the PMAC special tag which is added in front of the Ethernet header. This was tested with GSWIP 2.1 found in the VRX200 SoCs, other GSWIP versions use slightly different PMAC special tags. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: Add PHYLINK switch operationsFlorian Fainelli
In preparation for adding support for PHYLINK within DSA, define a number of operations that we will need and that switch drivers can start implementing. Proper integration with PHYLINK will follow in subsequent patches. We start selecting PHYLINK (which implies PHYLIB) in net/dsa/Kconfig such that drivers can be guaranteed that this dependency is properly taken care of and can start referencing PHYLINK helper functions without requiring stubs or anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: dsa: Allow compiling out legacy supportFlorian Fainelli
Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out support for the old platform device and Device Tree binding registration. Support for these configurations is scheduled to be removed in 4.17. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14net: dsa: Fix dependencies on bridgeAndrew Lunn
DSA now uses one of the symbols exported by the bridge, br_vlan_enabled(). This has a stub, if the bridge is not enabled. However, if the bridge is enabled, we cannot have DSA built in and the bridge as a module, otherwise we get undefined symbols at link time: net/dsa/port.o: In function `dsa_port_vlan_add': net/dsa/port.c:255: undefined reference to `br_vlan_enabled' net/dsa/port.o: In function `dsa_port_vlan_del': net/dsa/port.c:270: undefined reference to `br_vlan_enabled' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Support prepended Broadcom tagFlorian Fainelli
Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the 4-bytes Broadcom tag that we already support, but in a format where it is pre-pended to the packet instead of located between the MAC SA and the Ethertyper (DSA_TAG_PROTO_BRCM). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31dsa: add support for Microchip KSZ tail taggingWoojung Huh
Adding support for the Microchip KSZ switch family tail tagging. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: Sort DSA tagging protocol driversAndrew Lunn
With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: add support for the SMSC-LAN9303 tagging formatJuergen Beisert
To define the outgoing port and to discover the incoming port a regular VLAN tag is used by the LAN9303. But its VID meaning is 'special'. This tag handler/filter depends on some hardware features which must be enabled in the device to provide and make use of this special VLAN tag to control the destination and the source of an ethernet packet. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07net-next: dsa: add Mediatek tag RX/TX handlerSean Wang
Add the support for the 4-bytes tag for DSA port distinguishing inserted allowing receiving and transmitting the packet via the particular port. The tag is being added after the source MAC address in the ethernet header. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-01net: dsa: fix build error with devlink build as moduleTobias Regnery
After commit 96567d5dacf4 ("net: dsa: dsa2: Add basic support of devlink") I see the following link error with CONFIG_NET_DSA=y and CONFIG_NET_DEVLINK=m: net/built-in.o: In function 'dsa_register_switch': (.text+0xe226b): undefined reference to `devlink_alloc' net/built-in.o: In function 'dsa_register_switch': (.text+0xe2284): undefined reference to `devlink_register' net/built-in.o: In function 'dsa_register_switch': (.text+0xe243e): undefined reference to `devlink_port_register' net/built-in.o: In function 'dsa_register_switch': (.text+0xe24e1): undefined reference to `devlink_port_register' net/built-in.o: In function 'dsa_register_switch': (.text+0xe24fa): undefined reference to `devlink_port_type_eth_set' net/built-in.o: In function 'dsa_dst_unapply.part.8': dsa2.c:(.text.unlikely+0x345): undefined reference to 'devlink_port_unregister' dsa2.c:(.text.unlikely+0x36c): undefined reference to 'devlink_port_unregister' dsa2.c:(.text.unlikely+0x38e): undefined reference to 'devlink_port_unregister' dsa2.c:(.text.unlikely+0x3f2): undefined reference to 'devlink_unregister' dsa2.c:(.text.unlikely+0x3fb): undefined reference to 'devlink_free' Fix this by adding a dependency on MAY_USE_DEVLINK so that CONFIG_NET_DSA get switched to be build as module when CONFIG_NET_DEVLINK=m. Fixes: 96567d5dacf4 ("net: dsa: dsa2: Add basic support of devlink") Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20net: dsa: Remove hwmon supportAndrew Lunn
Only the Marvell mv88e6xxx DSA driver made use of the HWMON support in DSA. The temperature sensor registers are actually in the embedded PHYs, and the PHY driver now supports it. So remove all HWMON support from DSA and drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: select NET_SWITCHDEVVivien Didelot
The support for DSA Ethernet switch chips depends on TCP/IP networking, thus explicit that HAVE_NET_DSA depends on INET. DSA uses SWITCHDEV, thus select it instead of depending on it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net-next: dsa: add Qualcomm tag RX/TX handlerJohn Crispin
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: dsa: make NET_DSA manually selectable from the configMathieu Olivari
Change bd76a116707bd2381da36cf7c3183df11293f1d6 made all DSA drivers depend on NET_DSA rather than selecting them. However, as the only way to select this option was to actually select a driver, it made DSA impossible to enable at all. This patch adds an explicit entry which the user will have to enable prior selecting a driver. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16dsa: change "select" to "depends on" for NET_SWITCHDEV and for NET_DSAJiri Pirko
This would fix randconfig compile error: net/built-in.o: In function `netdev_switch_fib_ipv4_abort': (.text+0xf7811): undefined reference to `fib_flush_external' Also it fixes following warnings: warning: (NET_DSA) selects NET_SWITCHDEV which has unmet direct dependencies (NET && INET) warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6131 && NET_DSA_MV88E6123_61_65 && NET_DSA_MV88E6171 && NET_DSA_MV88E6352 && NET_DSA_BCM_SF2) selects NET_DSA which has unmet direct dependencies (NET && HAVE_NET_DSA && NET_SWITCHDEV) Reported-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25net: dsa: integrate with SWITCHDEV for HW bridgingFlorian Fainelli
In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Add support for reporting switch chip temperaturesGuenter Roeck
Some switches provide chip temperature data. Add support for reporting it through the hwmon subsystem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: add Broadcom tag RX/TX handlerFlorian Fainelli
Add support for the 4-bytes Broadcom tag that built-in switches such as the Starfighter 2 might insert when receiving packets, or that we need to insert while targetting specific switch ports. We use a fake local EtherType value for this 4-bytes switch tag: ETH_P_BRCMTAG to make sure we can assign DSA-specific network operations within the DSA drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26dsa: Hide core config options; make drivers select what they needBen Hutchings
Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25net: dsa/slave: Fix compilation warningsviresh kumar
Currently when none of CONFIG_NET_DSA_TAG_DSA, CONFIG_NET_DSA_TAG_EDSA and CONFIG_NET_DSA_TAG_TRAILER is defined, we get following compilation warnings: net/dsa/slave.c:51:12: warning: 'dsa_slave_init' defined but not used [-Wunused-function] net/dsa/slave.c:60:12: warning: 'dsa_slave_open' defined but not used [-Wunused-function] net/dsa/slave.c:98:12: warning: 'dsa_slave_close' defined but not used [-Wunused-function] net/dsa/slave.c:116:13: warning: 'dsa_slave_change_rx_flags' defined but not used [-Wunused-function] net/dsa/slave.c:127:13: warning: 'dsa_slave_set_rx_mode' defined but not used [-Wunused-function] net/dsa/slave.c:136:12: warning: 'dsa_slave_set_mac_address' defined but not used [-Wunused-function] net/dsa/slave.c:164:12: warning: 'dsa_slave_ioctl' defined but not used [-Wunused-function] Earlier approach to fix this was discussed here: lkml.org/lkml/2012/10/29/549 This is another approach to fix it. This is done by some changes in config options, which make more sense than the earlier approach. As, atleast one tagging option must always be selected for using net/dsa/ infrastructure, this patch selects NET_DSA from tagging configs instead of having it as an selectable config. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move switch drivers to new directory drivers/net/dsaBen Hutchings
Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26dsa: Allow core and drivers to be built as modulesBen Hutchings
Change the kconfig types to tristate and adjust the condition for declaring net_device::dsa_ptr to allow for this. Adjust the makefile so that if NET_DSA_MV88E6123_61_65=y and NET_DSA_MV88E6131=m or vice versa then both drivers are built-in. We could leave these options as bool and make NET_DSA_MV88E6XXX a user-selected option, but that would break existing configurations. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085Peter Korsgaard
The 88e6085 has a few differences from the other devices in the port control registers, causing unknown multicast/broadcast packets to get dropped when using the standard port setup. At the same time update kconfig to clarify that the mv88e6085 is now supported. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-11phylib: available for any speed ethernetRandy Dunlap
Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR, UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC, and OCTEON_ETHERNET) select PHYLIB. These drivers are not under NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant parts are omitted): warning: (NET_DSA && NET && EXPERIMENTAL && NET_ETHERNET && !S390 || ... || SB1250_MAC && NETDEVICES && NETDEV_1000 && SIBYTE_SB1xxx_SOC || TIGON3 && NETDEVICES && NETDEV_1000 && PCI || FSL_PQ_MDIO && NETDEVICES && NETDEV_1000 && FSL_SOC || GIANFAR && NETDEVICES && NETDEV_1000 && FSL_SOC || UCC_GETH && NETDEVICES && NETDEV_1000 && QUICC_ENGINE || MV643XX_ETH && NETDEVICES && NETDEV_1000 && (MV64X60 || PPC32 || PLAT_ORION) || XILINX_LL_TEMAC && NETDEVICES && NETDEV_1000 && (PPC || MICROBLAZE) || S6GMAC && NETDEVICES && NETDEV_1000 && XTENSA_VARIANT_S6000 || STMMAC_ETH && NETDEV_1000 && NETDEVICES && CPU_SUBTYPE_ST40 || PASEMI_MAC && NETDEVICES && NETDEV_10000 && PPC_PASEMI && PCI || OCTEON_ETHERNET && STAGING && !STAGING_EXCLUDE_BUILD && CPU_CAVIUM_OCTEON) selects PHYLIB which has unmet direct dependencies (!S390 && NET_ETHERNET) PHYLIB is used by non-10/100 mbit ethernet drivers, so change the dependencies to be NETDEVICES instead of NET_ETHERNET. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-12dsa: Fix Kconfig dependencies.David S. Miller
Based upon a report by Randy Dunlap. DSA needs PHYLIB, but PHYLIB needs NET_ETHERNET. So, in order to select PHYLIB we have to make DSA depend upon NET_ETHERNET. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21dsa: add support for the Marvell 88E6095/6095F switch chipsLennert Buytenhek
Add support for the Marvell 88E6095/6095F switch chips. These chips are similar to the 88e6131, so we can add the support to mv88e6131.c easily. Thanks to Gary Thomas <gary@mlbassoc.com> and Jesper Dangaard Brouer <hawk@diku.dk> for testing various patches. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13dsa: fix compile bug on s390Heiko Carstens
git commit 45cec1bac0719c904bb5f4405c2937f7e715888c "dsa: Need to select PHYLIB." causes this build bug on s390: drivers/built-in.o: In function `phy_stop_interrupts': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:631: undefined reference to `free_irq' /home/heicarst/linux-2.6/drivers/net/phy/phy.c:646: undefined reference to `enable_irq' drivers/built-in.o: In function `phy_start_interrupts': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:601: undefined reference to `request_irq' drivers/built-in.o: In function `phy_interrupt': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:528: undefined reference to `disable_irq_nosync' drivers/built-in.o: In function `phy_change': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:674: undefined reference to `enable_irq' /home/heicarst/linux-2.6/drivers/net/phy/phy.c:692: undefined reference to `disable_irq' PHYLIB has alread a depend on !S390, however select PHYLIB at DSA overrides that unfortunately. So add a depend on !S390 to DSA as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08dsa: Need to select PHYLIB.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08dsa: add support for the Marvell 88E6060 switch chipLennert Buytenhek
Add support for the Marvell 88E6060 switch chip. This chip only supports the Header and Trailer tagging formats, and we use it in Trailer mode since that mode is slightly easier to handle than Header mode. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08dsa: add support for Trailer tagging formatLennert Buytenhek
This adds support for the Trailer switch tagging format. This is another tagging that doesn't explicitly mark tagged packets with a distinct ethertype, so that we need to add a similar hack in the receive path as for the Original DSA tagging format. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08dsa: add support for the Marvell 88E6131 switch chipLennert Buytenhek
Add support for the Marvell 88E6131 switch chip. This chip only supports the original (ethertype-less) DSA tagging format. On the 88E6131, there is a PHY Polling Unit (PPU) which has exclusive access to each of the PHYs's MII management registers. If we want to talk to the PHYs from software, we have to disable the PPU and wait for it to complete its current transaction before we can do so, and we need to re-enable the PPU afterwards to make sure that the switch will notice changes in link state and speed on the individual ports as they occur. Since disabling the PPU is rather slow, and since MII management accesses are typically done in bursts, this patch keeps the PPU disabled for 10ms after a software access completes. This makes handling the PPU slightly more complex, but speeds up something like running ethtool on one of the switch slave interfaces from ~300ms to ~30ms on typical hardware. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08dsa: add support for original DSA tagging formatLennert Buytenhek
Most of the DSA switches currently in the field do not support the Ethertype DSA tagging format that one of the previous patches added support for, but only the original DSA tagging format. The original DSA tagging format carries the same information as the Ethertype DSA tagging format, but with the difference that it does not have an ethertype field. In other words, when receiving a packet that is tagged with an original DSA tag, there is no way of telling in eth_type_trans() that this packet is in fact a DSA-tagged packet. This patch adds a hook into eth_type_trans() which is only compiled in if support for a switch chip that doesn't support Ethertype DSA is selected, and which checks whether there is a DSA switch driver instance attached to this network device which uses the old tag format. If so, it sets the protocol field to ETH_P_DSA without looking at the packet, so that the packet ends up in the right place. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08net: Distributed Switch Architecture protocol supportLennert Buytenhek
Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>