summaryrefslogtreecommitdiff
path: root/net/dsa
AgeCommit message (Collapse)Author
2019-07-18net: dsa: sja1105: Fix missing unlock on error in sk_buff()Wei Yongjun
Add the missing unlock before return from function sk_buff() in the error handling case. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: dsa: add support for BRIDGE_MROUTER attributeVivien Didelot
This patch adds support for enabling or disabling the flooding of unknown multicast traffic on the CPU ports, depending on the value of the switchdev SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute. The current behavior is kept unchanged but a user can now prevent the CPU conduit to be flooded with a lot of unregistered traffic that the network stack needs to filter in software with e.g.: echo 0 > /sys/class/net/br0/multicast_router Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: add flow_block_cb_is_busy() and use itPablo Neira Ayuso
This patch adds a function to check if flow block callback is already in use. Call this new function from flow_block_cb_setup_simple() and from drivers. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09drivers: net: use flow block APIPablo Neira Ayuso
This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*Pablo Neira Ayuso
Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and remove temporary tcf_block_binder_type alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BINDPablo Neira Ayuso
Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove temporary tc_block_command alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: use switchdev handle helpersVivien Didelot
Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: make dsa_slave_dev_check use constVivien Didelot
The switchdev handle helpers make use of a device checking helper requiring a const net_device. Make dsa_slave_dev_check compliant to this. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: do not check orig_dev in vlan delVivien Didelot
The current DSA code handling switchdev objects does not recurse into the lower devices thus is never called with an orig_dev member being a bridge device, hence remove this useless check. At the same time, remove the comments about the callers, which is unlikely to be updated if the code changes and thus will be confusing. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-13net: dsa: tag_sja1105: Select CONFIG_PACKINGVladimir Oltean
The packing facility is needed to decode Ethernet meta frames containing source port and RX timestamping information. The DSA driver selects CONFIG_PACKING, but the tagger did not, and since taggers can be now compiled as modules independently from the drivers themselves, this is an issue now, as CONFIG_PACKING is disabled by default on all architectures. Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: dsa: Deal with non-existing PHY/fixed-linkFlorian Fainelli
We need to specifically deal with phylink_of_phy_connect() returning -ENODEV, because this can happen when a CPU/DSA port does connect neither to a PHY, nor has a fixed-link property. This is a valid use case that is permitted by the binding and indicates to the switch: auto-configure port with maximum capabilities. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: sja1105: Add a state machine for RX timestampingVladimir Oltean
Meta frame reception relies on the hardware keeping its promise that it will send no other traffic towards the CPU port between a link-local frame and a meta frame. Otherwise there is no other way to associate the meta frame with the link-local frame it's holding a timestamp of. The receive function is made stateful, and buffers a timestampable frame until its meta frame arrives, then merges the two, drops the meta and releases the link-local frame up the stack. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: sja1105: Receive and decode meta framesVladimir Oltean
This adds support in the tagger for understanding the source port and switch id of meta frames. Their timestamp is also extracted but not used yet - this needs to be done in a state machine that modifies the previously received timestampable frame - will be added in a follow-up patch. Also take the opportunity to: - Remove a comment in sja1105_filter made obsolete by e8d67fa5696e ("net: dsa: sja1105: Don't store frame type in skb->cb") - Reorder the checks in sja1105_filter to optimize for the most likely scenario first: regular traffic. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: sja1105: Make sja1105_is_link_local not match meta framesVladimir Oltean
Although meta frames are configured to be sent at SJA1105_META_DMAC (01-80-C2-00-00-0E) which is a multicast MAC address that would also be trapped by the switch to the CPU, were it to receive it on a front-panel port, meta frames are conceptually not link-local frames, they only carry their RX timestamps. The choice of sending meta frames at a multicast DMAC is a pragmatic one, to avoid installing an extra entry to the DSA master port's multicast MAC filter. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: sja1105: Build a minimal understanding of meta framesVladimir Oltean
Meta frames are sent on the CPU port by the switch if RX timestamping is enabled. They contain a partial timestamp of the previous frame. They are Ethernet frames with the Ethernet header constructed out of: - SJA1105_META_DMAC - SJA1105_META_SMAC - ETH_P_SJA1105_META The Ethernet payload will be decoded in a follow-up patch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan modeVladimir Oltean
The incl_srcpt setting makes the switch mangle the destination MACs of multicast frames trapped to the CPU - a primitive tagging mechanism that works even when we cannot use the 802.1Q software features. The downside is that the two multicast MAC addresses that the switch traps for L2 PTP (01-80-C2-00-00-0E and 01-1B-19-00-00-00) quickly turn into a lot more, as the switch encodes the source port and switch id into bytes 3 and 4 of the MAC. The resulting range of MAC addresses would need to be installed manually into the DSA master port's multicast MAC filter, and even then, most devices might not have a large enough MAC filtering table. As a result, only limit use of incl_srcpt to when it's strictly necessary: when under a VLAN filtering bridge. This fixes PTP in non-bridged mode (standalone ports). Otherwise, PTP frames, as well as metadata follow-up frames holding RX timestamps won't be received because they will be blocked by the master port's MAC filter. Linuxptp doesn't help, because it only requests the addition of the unmodified PTP MACs to the multicast filter. This issue is not seen in bridged mode because the master port is put in promiscuous mode when the slave ports are enslaved to a bridge. Therefore, there is no downside to having the incl_srcpt mechanism active there. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: tag_8021q: Create helper function for removing VLAN headerVladimir Oltean
This removes the existing implementation from tag_sja1105, which was partially incorrect (it was not changing the MAC header offset, thereby leaving it to point 4 bytes earlier than it should have). This overwrites the VLAN tag by moving the Ethernet source and destination MACs 4 bytes to the right. Then skb->data (assumed to be pointing immediately after the EtherType) is temporarily pushed to the beginning of the new Ethernet header, the new Ethernet header offset and length are recorded, then skb->data is moved back to where it was. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: Add teardown callback for driversVladimir Oltean
This is helpful for e.g. draining per-driver (not per-port) tagger queues. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-08net: dsa: Keep a pointer to the skb clone for TX timestampingVladimir Oltean
For drivers that use deferred_xmit for PTP frames (such as sja1105), there is no need to perform matching between PTP frames and their egress timestamps, since the sending process can be serialized. In that case, it makes sense to have the pointer to the skb clone that DSA made directly in the skb->cb. It will be used for pushing the egress timestamp back in the application socket's error queue. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Free AF_PACKET po->rollover properly, from Willem de Bruijn. 2) Read SFP eeprom in max 16 byte increments to avoid problems with some SFP modules, from Russell King. 3) Fix UDP socket lookup wrt. VRF, from Tim Beale. 4) Handle route invalidation properly in s390 qeth driver, from Julian Wiedmann. 5) Memory leak on unload in RDS, from Zhu Yanjun. 6) sctp_process_init leak, from Neil HOrman. 7) Fix fib_rules rule insertion semantic change that broke Android, from Hangbin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ipv6: fix EFAULT on sendto with icmpv6 and hdrincl ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" net: aquantia: fix wol configuration not applied sometimes ethtool: fix potential userspace buffer overflow Fix memory leak in sctp_process_init net: rds: fix memory leak when unload rds_rdma ipv6: fix the check before getting the cookie in rt6_get_cookie ipv4: not do cache for local delivery if bc_forwarding is enabled s390/qeth: handle error when updating TX queue count s390/qeth: fix VLAN attribute in bridge_hostnotify udev event s390/qeth: check dst entry before use s390/qeth: handle limited IPv4 broadcast in L3 TX path net: fix indirect calls helpers for ptype list hooks. net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set udp: only choose unbound UDP socket for multicast when not in a VRF net/tls: replace the sleeping lock around RX resync with a bit lock ...
2019-05-31net: dsa: sja1105: Don't store frame type in skb->cbVladimir Oltean
Due to a confusion I thought that eth_type_trans() was called by the network stack whereas it can actually be called by network drivers to figure out the skb protocol and next packet_type handlers. In light of the above, it is not safe to store the frame type from the DSA tagger's .filter callback (first entry point on RX path), since GRO is yet to be invoked on the received traffic. Hence it is very likely that the skb->cb will actually get overwritten between eth_type_trans() and the actual DSA packet_type handler. Of course, what this patch fixes is the actual overwriting of the SJA1105_SKB_CB(skb)->type field from the GRO layer, which made all frames be seen as SJA1105_FRAME_TYPE_NORMAL (0). Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The phylink conflict was between a bug fix by Russell King to make sure we have a consistent PHY interface mode, and a change in net-next to pull some code in phylink_resolve() into the helper functions phylink_mac_link_{up,down}() On the dp83867 side it's mostly overlapping changes, with the 'net' side removing a condition that was supposed to trigger for RGMII but because of how it was coded never actually could trigger. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31Merge tag 'spdx-5.2-rc3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. There is also a patch in here to add the proper SPDX header to a bunch of Kbuild files that we have missed in the past due to new files being added and forgetting that Kbuild uses two different file names for Makefiles. This issue was reported by the Kbuild maintainer. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits) treewide: Add SPDX license identifier - Kbuild treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 ...
2019-05-30net: dsa: Add error path handling in dsa_tree_setup()Ioana Ciornei
In case a call to dsa_tree_setup() fails, an attempt to cleanup is made by calling dsa_tree_remove_switch(), which should take care of removing/unregistering any resources previously allocated. This does not happen because it is conditioned by dst->setup being true, which is set only after _all_ setup steps were performed successfully. This is especially interesting when the internal MDIO bus is registered but afterwards, a port setup fails and the mdiobus_unregister() is never called. This leads to a BUG_ON() complaining about the fact that it's trying to free an MDIO bus that's still registered. Add proper error handling in all functions branching from dsa_tree_setup(). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: dsa: tag_8021q: Create a stable binary formatVladimir Oltean
Tools like tcpdump need to be able to decode the significance of fake VLAN headers that DSA uses to separate switch ports. But currently these have no global significance - they are simply an ordered list of DSA_MAX_SWITCHES x DSA_MAX_PORTS numbers ending at 4095. The reason why this is submitted as a fix is that the existing mapping of VIDs should not enter into a stable kernel, so we can pretend that only the new format exists. This way tcpdump won't need to try to make something out of the VLAN tags on 5.2 kernels. Fixes: f9bbe4477c30 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: dsa: tag_8021q: Change order of rx_vid setupIoana Ciornei
The 802.1Q tagging performs an unbalanced setup in terms of RX VIDs on the CPU port. For the ingress path of a 802.1Q switch to work, the RX VID of a port needs to be seen as tagged egress on the CPU port. While configuring the other front-panel ports to be part of this VID, for bridge scenarios, the untagged flag is applied even on the CPU port in dsa_switch_vlan_add. This happens because DSA applies the same flags on the CPU port as on the (bridge-controlled) slave ports, and the effect in this case is that the CPU port tagged settings get deleted. Instead of fixing DSA by introducing a way to control VLAN flags on the CPU port (and hence stop inheriting from the slave ports) - a hard, perhaps intractable problem - avoid this situation by moving the setup part of the RX VID on the CPU port after all the other front-panel ports have been added to the VID. Fixes: f9bbe4477c30 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29net: dsa: Use PHYLINK for the CPU/DSA portsIoana Ciornei
For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: dsa: Move the phylink driver calls into port.cIoana Ciornei
In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: phylink: Add struct phylink_config to PHYLINK APIIoana Ciornei
The phylink_config structure will encapsulate a pointer to a struct device and the operation type requested for this instance of PHYLINK. This patch does not make any functional changes, it just transitions the PHYLINK internals and all its users to the new API. A pointer to a phylink_config structure will be passed to phylink_create() instead of the net_device directly. Also, the same phylink_config pointer will be passed back to all phylink_mac_ops callbacks instead of the net_device. Using this mechanism, a PHYLINK user can get the original net_device using a structure such as 'to_net_dev(config->dev)' or directly the structure containing the phylink_config using a container_of call. At the moment, only the PHYLINK_NETDEV is defined as a valid operation type for PHYLINK. In this mode, a valid reference to a struct device linked to the original net_device should be passed to PHYLINK through the phylink_config structure. This API changes is mainly driven by the necessity of adding a new operation type in PHYLINK that disconnects the phy_device from the net_device and also works when the net_device is lacking. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-12net: dsa: Initialize DSA_SKB_CB(skb)->deferred_xmit variableVladimir Oltean
The sk_buff control block can have any contents on xmit put there by the stack, so initialization is mandatory, since we are checking its value after the actual DSA xmit (the tagger may have changed it). The DSA_SKB_ZERO() macro could have been used for this purpose, but: - Zeroizing a 48-byte memory region in the hotpath is best avoided. - It would have triggered a warning with newer compilers since __dsa_skb_cb contains a structure within a structure, and the {0} initializer was incorrect for that purpose. So simply remove the DSA_SKB_ZERO() macro and initialize the deferred_xmit variable by hand (which should be done for all further dsa_skb_cb variables which need initialization - currently none - to avoid the performance penalty). Fixes: 97a69a0dea9a ("net: dsa: Add support for deferred xmit") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-10dsa: tag_brcm: Fix build error without CONFIG_NET_DSA_TAG_BRCM_PREPENDYueHaibing
Fix gcc build error: net/dsa/tag_brcm.c:211:16: error: brcm_prepend_netdev_ops undeclared here (not in a function); did you mean brcm_netdev_ops? DSA_TAG_DRIVER(brcm_prepend_netdev_ops); ^ ./include/net/dsa.h:708:10: note: in definition of macro DSA_TAG_DRIVER .ops = &__ops, \ ^~~~~ ./include/net/dsa.h:701:36: warning: dsa_tag_driver_brcm_prepend_netdev_ops defined but not used [-Wunused-variable] #define DSA_TAG_DRIVER_NAME(__ops) dsa_tag_driver ## _ ## __ops ^ ./include/net/dsa.h:707:30: note: in expansion of macro DSA_TAG_DRIVER_NAME static struct dsa_tag_driver DSA_TAG_DRIVER_NAME(__ops) = { \ ^~~~~~~~~~~~~~~~~~~ net/dsa/tag_brcm.c:211:1: note: in expansion of macro DSA_TAG_DRIVER DSA_TAG_DRIVER(brcm_prepend_netdev_ops); Like the CONFIG_NET_DSA_TAG_BRCM case, brcm_prepend_netdev_ops and DSA_TAG_PROTO_BRCM_PREPEND should be wrappeed by CONFIG_NET_DSA_TAG_BRCM_PREPEND. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b74b70c44986 ("net: dsa: Support prepended Broadcom tag") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: support of_get_mac_address new ERR_PTR errorPetr Štetiar
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: Fix error cleanup path in dsa_init_moduleYueHaibing
BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: sja1105: Add support for traffic through standalone portsVladimir Oltean
In order to support this, we are creating a make-shift switch tag out of a VLAN trunk configured on the CPU port. Termination of normal traffic on switch ports only works when not under a vlan_filtering bridge. Termination of management (PTP, BPDU) traffic works under all circumstances because it uses a different tagging mechanism (incl_srcpt). We are making use of the generic CONFIG_NET_DSA_TAG_8021Q code and leveraging it from our own CONFIG_NET_DSA_TAG_SJA1105. There are two types of traffic: regular and link-local. The link-local traffic received on the CPU port is trapped from the switch's regular forwarding decisions because it matched one of the two DMAC filters for management traffic. On transmission, the switch requires special massaging for these link-local frames. Due to a weird implementation of the switching IP, by default it drops link-local frames that originate on the CPU port. It needs to be told where to forward them to, through an SPI command ("management route") that is valid for only a single frame. So when we're sending link-local traffic, we are using the dsa_defer_xmit mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Add support for deferred xmitVladimir Oltean
Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Allow drivers to filter packets they can decode source port fromVladimir Oltean
Frames get processed by DSA and redirected to switch port net devices based on the ETH_P_XDSA multiplexed packet_type handler found by the network stack when calling eth_type_trans(). The running assumption is that once the DSA .rcv function is called, DSA is always able to decode the switch tag in order to change the skb->dev from its master. However there are tagging protocols (such as the new DSA_TAG_PROTO_SJA1105, user of DSA_TAG_PROTO_8021Q) where this assumption is not completely true, since switch tagging piggybacks on the absence of a vlan_filtering bridge. Moreover, management traffic (BPDU, PTP) for this switch doesn't rely on switch tagging, but on a different mechanism. So it would make sense to at least be able to terminate that. Having DSA receive traffic it can't decode would put it in an impossible situation: the eth_type_trans() function would invoke the DSA .rcv(), which could not change skb->dev, then eth_type_trans() would be invoked again, which again would call the DSA .rcv, and the packet would never be able to exit the DSA filter and would spiral in a loop until the whole system dies. This happens because eth_type_trans() doesn't actually look at the skb (so as to identify a potential tag) when it deems it as being ETH_P_XDSA. It just checks whether skb->dev has a DSA private pointer installed (therefore it's a DSA master) and that there exists a .rcv callback (everybody except DSA_TAG_PROTO_NONE has that). This is understandable as there are many switch tags out there, and exhaustively checking for all of them is far from ideal. The solution lies in introducing a filtering function for each tagging protocol. In the absence of a filtering function, all traffic is passed to the .rcv DSA callback. The tagging protocol should see the filtering function as a pre-validation that it can decode the incoming skb. The traffic that doesn't match the filter will bypass the DSA .rcv callback and be left on the master netdevice, which wasn't previously possible. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Optional VLAN-based port separation for switches without taggingVladimir Oltean
This patch provides generic DSA code for using VLAN (802.1Q) tags for the same purpose as a dedicated switch tag for injection/extraction. It is based on the discussions and interest that has been so far expressed in https://www.spinics.net/lists/netdev/msg556125.html. Unlike all other DSA-supported tagging protocols, CONFIG_NET_DSA_TAG_8021Q does not offer a complete solution for drivers (nor can it). Instead, it provides generic code that driver can opt into calling: - dsa_8021q_xmit: Inserts a VLAN header with the specified contents. Can be called from another tagging protocol's xmit function. Currently the LAN9303 driver is inserting headers that are simply 802.1Q with custom fields, so this is an opportunity for code reuse. - dsa_8021q_rcv: Retrieves the TPID and TCI from a VLAN-tagged skb. Removing the VLAN header is left as a decision for the caller to make. - dsa_port_setup_8021q_tagging: For each user port, installs an Rx VID and a Tx VID, for proper untagged traffic identification on ingress and steering on egress. Also sets up the VLAN trunk on the upstream (CPU or DSA) port. Drivers are intentionally left to call this function explicitly, depending on the context and hardware support. The expected switch behavior and VLAN semantics should not be violated under any conditions. That is, after calling dsa_port_setup_8021q_tagging, the hardware should still pass all ingress traffic, be it tagged or untagged. For uniformity with the other tagging protocols, a module for the dsa_8021q_netdev_ops structure is registered, but the typical usage is to set up another tagging protocol which selects CONFIG_NET_DSA_TAG_8021Q, and calls the API from tag_8021q.h. Null function definitions are also provided so that a "depends on" is not forced in the Kconfig. This tagging protocol only works when switch ports are standalone, or when they are added to a VLAN-unaware bridge. It will probably remain this way for the reasons below. When added to a bridge that has vlan_filtering 1, the bridge core will install its own VLANs and reset the pvids through switchdev. For the bridge core, switchdev is a write-only pipe. All VLAN-related state is kept in the bridge core and nothing is read from DSA/switchdev or from the driver. So the bridge core will break this port separation because it will install the vlan_default_pvid into all switchdev ports. Even if we could teach the bridge driver about switchdev preference of a certain vlan_default_pvid (task difficult in itself since the current setting is per-bridge but we would need it per-port), there would still exist many other challenges. Firstly, in the DSA rcv callback, a driver would have to perform an iterative reverse lookup to find the correct switch port. That is because the port is a bridge slave, so its Rx VID (port PVID) is subject to user configuration. How would we ensure that the user doesn't reset the pvid to a different value (which would make an O(1) translation impossible), or to a non-unique value within this DSA switch tree (which would make any translation impossible)? Finally, not all switch ports are equal in DSA, and that makes it difficult for the bridge to be completely aware of this anyway. The CPU port needs to transmit tagged packets (VLAN trunk) in order for the DSA rcv code to be able to decode source information. But the bridge code has absolutely no idea which switch port is the CPU port, if nothing else then just because there is no netdevice registered by DSA for the CPU port. Also DSA does not currently allow the user to specify that they want the CPU port to do VLAN trunking anyway. VLANs are added to the CPU port using the same flags as they were added on the user port. So the VLANs installed by dsa_port_setup_8021q_tagging per driver request should remain private from the bridge's and user's perspective, and should not alter the VLAN semantics observed by the user. In the current implementation a VLAN range ending at 4095 (VLAN_N_VID) is reserved for this purpose. Each port receives a unique Rx VLAN and a unique Tx VLAN. Separate VLANs are needed for Rx and Tx because they serve different purposes: on Rx the switch must process traffic as untagged and process it with a port-based VLAN, but with care not to hinder bridging. On the other hand, the Tx VLAN is where the reachability restrictions are imposed, since by tagging frames in the xmit callback we are telling the switch onto which port to steer the frame. Some general guidance on how this support might be employed for real-life hardware (some comments made by Florian Fainelli): - If the hardware supports VLAN tag stacking, it should somehow back up its private VLAN settings when the bridge tries to override them. Then the driver could re-apply them as outer tags. Dedicating an outer tag per bridge device would allow identical inner tag VID numbers to co-exist, yet preserve broadcast domain isolation. - If the switch cannot handle VLAN tag stacking, it should disable this port separation when added as slave to a vlan_filtering bridge, in that case having reduced functionality. - Drivers for old switches that don't support the entire VLAN_N_VID range will need to rework the current range selection mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Export symbols for dsa_port_vid_{add, del}Vladimir Oltean
This is needed so that the newly introduced tag_8021q may access these core DSA functions when built as a module. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Call driver's setup callback after setting up its switchdev notifierVladimir Oltean
This allows the driver to perform some manipulations of its own during setup, using generic switchdev calls. Having the notifiers registered at setup time is important because otherwise any switchdev transaction emitted during this time would be ignored (dispatched to an empty call chain). One current usage scenario is for the driver to request DSA to set up 802.1Q based switch tagging for its ports. There is no danger for the driver setup code to start racing now with switchdev events emitted from the network stack (such as bridge core) even if the notifier is registered earlier. This is because the network stack needs a net_device as a vehicle to perform switchdev operations, and the slave net_devices are registered later than the core driver setup anyway (ds->ops->setup in dsa_switch_setup vs dsa_port_setup). Luckily DSA doesn't need a net_device to carry out switchdev callbacks, and therefore drivers shouldn't assume either that net_devices are available at the time their switchdev callbacks get invoked. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>- Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net/dsa: use intermediate representation for matchall offloadPieter Jansen van Vuuren
Updates dsa hardware switch handling infrastructure to use the newer intermediate representation for flow actions in matchall offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Remove legacy probing supportAndrew Lunn
Now that all drivers can be probed using more traditional methods, remove the legacy probe code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Add more convenient functions for installing port VLANsVladimir Oltean
This hides the need to perform a two-phase transaction and construct a switchdev_obj_port_vlan struct. Call graph (including a function that will be introduced in a follow-up patch) looks like this now (same for the *_vlan_del function): dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Skip calling .port_vlan_filtering on no changeVladimir Oltean
Even if VLAN filtering is global, DSA will call this callback once per each port. Drivers should not have to compare the global state with the requested change. So let DSA do it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Keep the vlan_filtering setting in dsa_switch if it's globalVladimir Oltean
The current behavior is not as obvious as one would assume (which is that, if the driver set vlan_filtering_is_global = 1, then checking any dp->vlan_filtering would yield the same result). Only the ports which are actively enslaved into a bridge would have vlan_filtering set. This makes it tricky for drivers to check what the global state is. So fix this and make the struct dsa_switch hold this global setting. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Unset vlan_filtering when ports leave the bridgeVladimir Oltean
When ports are standalone (after they left the bridge), they should have no VLAN filtering semantics (they should pass all traffic to the CPU). Currently this is not true for switchdev drivers, because the bridge "forgets" to unset that. Normally one would think that doing this at the bridge layer would be a better idea, i.e. call br_vlan_filter_toggle() from br_del_if(), similar to how nbp_vlan_init() is called from br_add_if(). However what complicates that approach, and makes this one preferable, is the fact that for the bridge core, vlan_filtering is a per-bridge setting, whereas for switchdev/DSA it is per-port. Also there are switches where the setting is per the entire device, and unsetting vlan_filtering one by one, for each leaving port, would not be possible from the bridge core without a certain level of awareness. So do this in DSA and let drivers be unaware of it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: Be aware of switches where VLAN filtering is a global settingVladimir Oltean
On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>