| Age | Commit message (Collapse) | Author |
|---|
|
Fix missing initialization of ts_info->phc_index in the dump command,
which could cause a netdev interface to incorrectly display a PTP provider
at index 0 instead of "none".
Fix it by initializing the phc_index to -1.
In the same time, restore missing initialization of ts_info.cmd for the
IOCTL case, as it was before the transition from ethnl_default_dumpit to
custom ethnl_tsinfo_dumpit.
Also, remove unnecessary zeroing of ts_info, as it is embedded within
reply_data, which is fully zeroed two lines earlier.
Fixes: b9e3f7dc9ed95 ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250307091255.463559-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For packets with two-step timestamp requests, the hardware timestamp
comes back to the driver through a confirmation mechanism of sorts,
which allows the driver to confidently bump the successful "pkts"
counter.
For one-step PTP, the NIC is supposed to autonomously insert its
hardware TX timestamp in the packet headers while simultaneously
transmitting it. There may be a confirmation that this was done
successfully, or there may not.
None of the current drivers which implement ethtool_ops :: get_ts_stats()
also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it
is a bit unclear which model to follow. But there are NICs, such as DSA,
where there is no transmit confirmation at all. Here, it would be wrong /
misleading to increment the successful "pkts" counter, because one-step
PTP packets can be dropped on TX just like any other packets.
So introduce a special counter which signifies "yes, an attempt was made,
but we don't know whether it also exited the port or not". I expect that
for one-step PTP packets where a confirmation is available, the "pkts"
counter would be bumped.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Either the MAC or the PHY can provide hwtstamp, so we should be able to
read the tsinfo for any hwtstamp provider.
Enhance 'get' command to retrieve tsinfo of hwtstamp providers within a
network topology.
Add support for a specific dump command to retrieve all hwtstamp
providers within the network topology, with added functionality for
filtered dump to target a single interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Statistic values should be set to ETHTOOL_STAT_NOT_SET even if the
device doesn't support statistics. Otherwise zeros will be returned as
if they are proper values:
host# ethtool -I -T lo
Time stamping parameters for lo:
Capabilities:
software-transmit
software-receive
software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
Statistics:
tx_pkts: 0
tx_lost: 0
tx_err: 0
Fixes: 0e9c127729be ("ethtool: add interface to read Tx hardware timestamping statistics")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20240530040814.1014446-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple network devices that support hardware timestamping appear to have
common behavior with regards to timestamp handling. Implement common Tx
hardware timestamping statistics in a tx_stats struct_group. Common Rx
hardware timestamping statistics can subsequently be implemented in a
rx_stats struct_group for ethtool_ts_stats.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-2-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.
Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To get the most out of parsing by the core, and to allow dumping
full policies we need to specify which policy applies to nested
attrs. For headers it's ethnl_header_policy.
$ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/*
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since ethtool uses strict attribute validation there's no need
to initialize all attributes in policy tables. 0 is NLA_UNSPEC
which is going to be rejected. Remove the NLA_REJECTs.
Similarly attributes above maxattrs are rejected, so there's
no need to always size the policy tables to ETHTOOL_A_..._MAX.
v2: - new patch
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Wire up policies for get commands in struct nla_policy of the ethtool
family. Make use of genetlink code attr validation and parsing, as well
as allow dumping policies to user space.
For every ETHTOOL_MSG_*_GET:
- add 'ethnl_' prefix to policy name
- add extern declaration in net/ethtool/netlink.h
- wire up the policy & attr in ethtool_genl_ops[].
- remove .request_policy and .max_attr from ethnl_request_ops.
Obviously core only records the first "layer" of parsed attrs
so we still need to parse the sub-attrs of the nested header
attribute.
v2:
- merge of patches 1 and 2 from v1
- remove stray empty lines in ops
- also remove .max_attr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement TSINFO_GET request to get timestamping information for a network
device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl
request.
Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink
code use the same logic to get timestamping information from the device.
v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
