summaryrefslogtreecommitdiff
path: root/net/hsr
AgeCommit message (Collapse)Author
2020-05-07hsr: remove WARN_ONCE() in hsr_fill_frame_info()Taehee Yoo
When VLAN frame is being sent, hsr calls WARN_ONCE() because hsr doesn't support VLAN. But using WARN_ONCE() is overdoing. Using netdev_warn_once() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: hsr: fix incorrect type usage for protocol variableMurali Karicheri
Fix following sparse checker warning:- net/hsr/hsr_slave.c:38:18: warning: incorrect type in assignment (different base types) net/hsr/hsr_slave.c:38:18: expected unsigned short [unsigned] [usertype] protocol net/hsr/hsr_slave.c:38:18: got restricted __be16 [usertype] h_proto net/hsr/hsr_slave.c:39:25: warning: restricted __be16 degrades to integer net/hsr/hsr_slave.c:39:57: warning: restricted __be16 degrades to integer Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30hsr: remove hsr interface if all slaves are removedTaehee Yoo
When all hsr slave interfaces are removed, hsr interface doesn't work. At that moment, it's fine to remove an unused hsr interface automatically for saving resources. That's a common behavior of virtual interfaces. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29net: hsr: remove unused inline functionsYueHaibing
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25hsr: remove unnecessary code in hsr_dev_change_mtu()Taehee Yoo
In the hsr_dev_change_mtu(), the 'dev' and 'master->dev' pointer are same. So, the 'master' variable and some code are unnecessary. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07hsr: check protocol version in hsr_newlink()Taehee Yoo
In the current hsr code, only 0 and 1 protocol versions are valid. But current hsr code doesn't check the version, which is received by userspace. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4 In the test commands, version 4 is invalid. So, the command should be failed. After this patch, following error will occur. "Error: hsr: Only versions 0..1 are supported." Fixes: ee1c27977284 ("net/hsr: Added support for HSR v1") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21hsr: fix general protection fault in hsr_addr_is_self()Taehee Yoo
The port->hsr is used in the hsr_handle_frame(), which is a callback of rx_handler. hsr master and slaves are initialized in hsr_add_port(). This function initializes several pointers, which includes port->hsr after registering rx_handler. So, in the rx_handler routine, un-initialized pointer would be used. In order to fix this, pointers should be initialized before registering rx_handler. Test commands: ip netns del left ip netns del right modprobe -rv veth modprobe -rv hsr killall ping modprobe hsr ip netns add left ip netns add right ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link add veth4 type veth peer name veth5 ip link set veth1 netns left ip link set veth3 netns right ip link set veth4 netns left ip link set veth5 netns right ip link set veth0 up ip link set veth2 up ip link set veth0 address fc:00:00:00:00:01 ip link set veth2 address fc:00:00:00:00:02 ip netns exec left ip link set veth1 up ip netns exec left ip link set veth4 up ip netns exec right ip link set veth3 up ip netns exec right ip link set veth5 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4 ip netns exec left ip a a 192.168.100.2/24 dev hsr1 ip netns exec left ip link set hsr1 up ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent for i in {1..100} do ip netns exec left ping 192.168.100.1 & done ip netns exec left hping3 192.168.100.1 -2 --flood & ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5 ip netns exec right ip a a 192.168.100.3/24 dev hsr2 ip netns exec right ip link set hsr2 up ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent for i in {1..100} do ip netns exec right ping 192.168.100.1 & done ip netns exec right hping3 192.168.100.1 -2 --flood & while : do ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip link del hsr0 done Splat looks like: [ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I [ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460 [ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr] [ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4 [ 120.966277][ C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206 [ 120.967293][ C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000 [ 120.968516][ C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000 [ 120.969718][ C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 120.972203][ C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000 [ 120.973379][ C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040 [ 120.974410][ C0] FS: 00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 120.980773][ C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0 [ 120.981945][ C0] Call Trace: [ 120.982411][ C0] <IRQ> [ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr] [ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0 [ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr] [ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr] [ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170 [ 120.992513][ C0] ? check_chain_key+0x236/0x5d0 [ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460 [ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0 [ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160 [ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160 [ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170 [ ... ] Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: set .netnsok flagTaehee Yoo
The hsr module has been supporting the list and status command. (HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS) These commands send node information to the user-space via generic netlink. But, in the non-init_net namespace, these commands are not allowed because .netnsok flag is false. So, there is no way to get node information in the non-init_net namespace. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: add restart routine into hsr_get_node_list()Taehee Yoo
The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: use rcu_read_lock() in hsr_get_node_{list/status}()Taehee Yoo
hsr_get_node_{list/status}() are not under rtnl_lock() because they are callback functions of generic netlink. But they use __dev_get_by_index() without rtnl_lock(). So, it would use unsafe data. In order to fix it, rcu_read_lock() and dev_get_by_index_rcu() are used instead of __dev_get_by_index(). Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05hsr: fix refcnt leak of hsr slave interfaceTaehee Yoo
In the commit e0a4b99773d3 ("hsr: use upper/lower device infrastructure"), dev_get() was removed but dev_put() in the error path wasn't removed. So, if creating hsr interface command is failed, the reference counter leak of lower interface would occur. Test commands: ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan mode l2 ip link add ipvlan1 link dummy0 type ipvlan mode l2 ip link add hsr0 type hsr slave1 ipvlan0 slave2 ipvlan1 ip link del ipvlan0 Result: [ 633.271992][ T1280] unregister_netdevice: waiting for ipvlan0 to become free. Usage count = -1 Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use upper/lower device infrastructureTaehee Yoo
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: remove unnecessary rcu_read_lock() in hsr moduleTaehee Yoo
In order to access the port list, the hsr_port_get_hsr() is used. And this is protected by RTNL and RCU. The hsr_fill_info(), hsr_check_carrier(), hsr_dev_open() and hsr_get_max_mtu() are protected by RTNL. So, rcu_read_lock() in these functions are not necessary. The hsr_handle_frame() also uses rcu_read_lock() but this function is called by packet path. It's already protected by RCU. So, the rcu_read_lock() in hsr_handle_frame() can be removed. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use netdev_err() instead of WARN_ONCE()Taehee Yoo
When HSR interface is sending a frame, it finds a node with the destination ethernet address from the list. If there is no node, it calls WARN_ONCE(). But, using WARN_ONCE() for this situation is a little bit overdoing. So, in this patch, the netdev_err() is used instead. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use extack error message instead of netdev_infoTaehee Yoo
If HSR uses the extack instead of netdev_info(), users can get error messages immediately without any checking the kernel message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use debugfs_remove_recursive() instead of debugfs_remove()Taehee Yoo
If it uses debugfs_remove_recursive() instead of debugfs_remove(), hsr_priv() doesn't need to have "node_tbl_file" pointer variable. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hsr: Pass lockdep expression to RCU listsAmol Grover
node_db is traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of hsr->list_lock. Hence, add corresponding lockdep expression to silence false-positive warnings, and harden RCU lists. Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04net: hsr: fix possible NULL deref in hsr_handle_frame()Eric Dumazet
hsr_port_get_rcu() can return NULL, so we need to be careful. general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44 Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33 RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000 RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8 FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31 __netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312 process_backlog+0x206/0x750 net/core/dev.c:6144 napi_poll net/core/dev.c:6582 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6650 __do_softirq+0x262/0x98c kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net/hsr: remove seq_nr_after_or_eqAlex Shi
It's never used after introduced. So maybe better to remove. Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08hsr: fix dummy hsr_debugfs_rename() declarationArnd Bergmann
The hsr_debugfs_rename prototype got an extra 'void' that needs to be removed again: In file included from /git/arm-soc/net/hsr/hsr_main.c:12: net/hsr/hsr_main.h:194:20: error: two or more data types in declaration specifiers static inline void void hsr_debugfs_rename(struct net_device *dev) Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()Taehee Yoo
hsr slave interfaces don't have debugfs directory. So, hsr_debugfs_rename() shouldn't be called when hsr slave interface name is changed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link set dummy0 name ap Splat looks like: [21071.899367][T22666] ap: renamed from dummy0 [21071.914005][T22666] ================================================================== [21071.919008][T22666] BUG: KASAN: slab-out-of-bounds in hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.923640][T22666] Read of size 8 at addr ffff88805febcd98 by task ip/22666 [21071.926941][T22666] [21071.927750][T22666] CPU: 0 PID: 22666 Comm: ip Not tainted 5.5.0-rc2+ #240 [21071.929919][T22666] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [21071.935094][T22666] Call Trace: [21071.935867][T22666] dump_stack+0x96/0xdb [21071.936687][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.937774][T22666] print_address_description.constprop.5+0x1be/0x360 [21071.939019][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940081][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940949][T22666] __kasan_report+0x12a/0x16f [21071.941758][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.942674][T22666] kasan_report+0xe/0x20 [21071.943325][T22666] hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.944187][T22666] hsr_netdev_notify+0x1fe/0x9b0 [hsr] [21071.945052][T22666] ? __module_text_address+0x13/0x140 [21071.945897][T22666] notifier_call_chain+0x90/0x160 [21071.946743][T22666] dev_change_name+0x419/0x840 [21071.947496][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.948600][T22666] ? netdev_adjacent_rename_links+0x280/0x280 [21071.949577][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.950672][T22666] ? lock_downgrade+0x6e0/0x6e0 [21071.951345][T22666] ? do_setlink+0x811/0x2ef0 [21071.951991][T22666] do_setlink+0x811/0x2ef0 [21071.952613][T22666] ? is_bpf_text_address+0x81/0xe0 [ ... ] Reported-by: syzbot+9328206518f08318a5fd@syzkaller.appspotmail.com Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: reset network header when supervision frame is createdTaehee Yoo
The supervision frame is L2 frame. When supervision frame is created, hsr module doesn't set network header. If tap routine is enabled, dev_queue_xmit_nit() is called and it checks network_header. If network_header pointer wasn't set(or invalid), it resets network_header and warns. In order to avoid unnecessary warning message, resetting network_header is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up tcpdump -nei veth0 Splat looks like: [ 175.852292][ C3] protocol 88fb is buggy, dev veth0 Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: fix a race condition in node list insertion and deletionTaehee Yoo
hsr nodes are protected by RCU and there is no write side lock. But node insertions and deletions could be being operated concurrently. So write side locking is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up for i in {0..9} do for j in {0..9} do for k in {0..9} do for l in {0..9} do arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 & done done done done Splat looks like: [ 236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0. [ 236.069617][ T3286] ------------[ cut here ]------------ [ 236.070545][ T3286] kernel BUG at lib/list_debug.c:25! [ 236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G W 5.5.0-rc1+ #209 [ 236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0 [ 236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b [ 236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286 [ 236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000 [ 236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf [ 236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9 [ 236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28 [ 236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02 [ 236.138967][ T3286] FS: 00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 236.144852][ T3286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0 [ 236.146776][ T3286] Call Trace: [ 236.147222][ T3286] hsr_add_node+0x314/0x490 [hsr] [ 236.153633][ T3286] hsr_forward_skb+0x2b6/0x1bc0 [hsr] [ 236.154362][ T3286] ? rcu_read_lock_sched_held+0x90/0xc0 [ 236.155091][ T3286] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 236.156607][ T3286] hsr_dev_xmit+0x70/0xd0 [hsr] [ 236.157254][ T3286] dev_hard_start_xmit+0x160/0x740 [ 236.157941][ T3286] __dev_queue_xmit+0x1961/0x2e10 [ 236.158565][ T3286] ? netdev_core_pick_tx+0x2e0/0x2e0 [ ... ] Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: rename debugfs file when interface name is changedTaehee Yoo
hsr interface has own debugfs file, which name is same with interface name. So, interface name is changed, debugfs file name should be changed too. Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: add hsr root debugfs directoryTaehee Yoo
In current hsr code, when hsr interface is created, it creates debugfs directory /sys/kernel/debug/<interface name>. If there is same directory or file name in there, it fails. In order to reduce possibility of failure of creation of debugfs, this patch adds root directory. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 Before this patch: /sys/kernel/debug/hsr0/node_table After this patch: /sys/kernel/debug/hsr/hsr0/node_table Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: fix error handling routine in hsr_dev_finalize()Taehee Yoo
hsr_dev_finalize() is called to create new hsr interface. There are some wrong error handling codes. 1. wrong checking return value of debugfs_create_{dir/file}. These function doesn't return NULL. If error occurs in there, it returns error pointer. So, it should check error pointer instead of NULL. 2. It doesn't unregister interface if it fails to setup hsr interface. If it fails to initialize hsr interface after register_netdevice(), it should call unregister_netdevice(). 3. Ignore failure of creation of debugfs If creating of debugfs dir and file is failed, creating hsr interface will be failed. But debugfs doesn't affect actual logic of hsr module. So, ignoring this is more correct and this behavior is more general. Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: avoid debugfs warning message when module is removeTaehee Yoo
When hsr module is being removed, debugfs_remove() is called to remove both debugfs directory and file. When module is being removed, module state is changed to MODULE_STATE_GOING then exit() is called. At this moment, module couldn't be held so try_module_get() will be failed. debugfs's open() callback tries to hold the module if .owner is existing. If it fails, warning message is printed. CPU0 CPU1 delete_module() try_stop_module() hsr_exit() open() <-- WARNING debugfs_remove() In order to avoid the warning message, this patch makes hsr module does not set .owner. Unsetting .owner is safe because these are protected by inode_lock(). Test commands: #SHELL1 ip link add dummy0 type dummy ip link add dummy1 type dummy while : do ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 modprobe -rv hsr done #SHELL2 while : do cat /sys/kernel/debug/hsr0/node_table done Splat looks like: [ 101.223783][ T1271] ------------[ cut here ]------------ [ 101.230309][ T1271] debugfs file owner did not clean up at exit: node_table [ 101.230380][ T1271] WARNING: CPU: 3 PID: 1271 at fs/debugfs/file.c:309 full_proxy_open+0x10f/0x650 [ 101.233153][ T1271] Modules linked in: hsr(-) dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_d] [ 101.237112][ T1271] CPU: 3 PID: 1271 Comm: cat Tainted: G W 5.5.0-rc1+ #204 [ 101.238270][ T1271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 101.240379][ T1271] RIP: 0010:full_proxy_open+0x10f/0x650 [ 101.241166][ T1271] Code: 48 c1 ea 03 80 3c 02 00 0f 85 c1 04 00 00 49 8b 3c 24 e8 04 86 7e ff 84 c0 75 2d 4c 8 [ 101.251985][ T1271] RSP: 0018:ffff8880ca22fa38 EFLAGS: 00010286 [ 101.273355][ T1271] RAX: dffffc0000000008 RBX: ffff8880cc6e6200 RCX: 0000000000000000 [ 101.274466][ T1271] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8880c4dd5c14 [ 101.275581][ T1271] RBP: 0000000000000000 R08: fffffbfff2922f5d R09: 0000000000000000 [ 101.276733][ T1271] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffffc0551bc0 [ 101.277853][ T1271] R13: ffff8880c4059a48 R14: ffff8880be50a5e0 R15: ffffffff941adaa0 [ 101.278956][ T1271] FS: 00007f8871cda540(0000) GS:ffff8880da800000(0000) knlGS:0000000000000000 [ 101.280216][ T1271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.282832][ T1271] CR2: 00007f88717cfd10 CR3: 00000000b9440005 CR4: 00000000000606e0 [ 101.283974][ T1271] Call Trace: [ 101.285328][ T1271] do_dentry_open+0x63c/0xf50 [ 101.286077][ T1271] ? open_proxy_open+0x270/0x270 [ 101.288271][ T1271] ? __x64_sys_fchdir+0x180/0x180 [ 101.288987][ T1271] ? inode_permission+0x65/0x390 [ 101.289682][ T1271] path_openat+0x701/0x2810 [ 101.290294][ T1271] ? path_lookupat+0x880/0x880 [ 101.290957][ T1271] ? check_chain_key+0x236/0x5d0 [ 101.291676][ T1271] ? __lock_acquire+0xdfe/0x3de0 [ 101.292358][ T1271] ? sched_clock+0x5/0x10 [ 101.292962][ T1271] ? sched_clock_cpu+0x18/0x170 [ 101.293644][ T1271] ? find_held_lock+0x39/0x1d0 [ 101.305616][ T1271] do_filp_open+0x17a/0x270 [ 101.306061][ T1271] ? may_open_dev+0xc0/0xc0 [ ... ] Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05hsr: fix a NULL pointer dereference in hsr_dev_xmit()Taehee Yoo
hsr_dev_xmit() calls hsr_port_get_hsr() to find master node and that would return NULL if master node is not existing in the list. But hsr_dev_xmit() doesn't check return pointer so a NULL dereference could occur. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up hping3 192.168.100.2 -2 --flood & modprobe -rv hsr Splat looks like: [ 217.351122][ T1635] kasan: CONFIG_KASAN_INLINE enabled [ 217.352969][ T1635] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 217.354297][ T1635] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 217.355507][ T1635] CPU: 1 PID: 1635 Comm: hping3 Not tainted 5.4.0+ #192 [ 217.356472][ T1635] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 217.357804][ T1635] RIP: 0010:hsr_dev_xmit+0x34/0x90 [hsr] [ 217.373010][ T1635] Code: 48 8d be 00 0c 00 00 be 04 00 00 00 48 83 ec 08 e8 21 be ff ff 48 8d 78 10 48 ba 00 b [ 217.376919][ T1635] RSP: 0018:ffff8880cd8af058 EFLAGS: 00010202 [ 217.377571][ T1635] RAX: 0000000000000000 RBX: ffff8880acde6840 RCX: 0000000000000002 [ 217.379465][ T1635] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: 0000000000000010 [ 217.380274][ T1635] RBP: ffff8880acde6840 R08: ffffed101b440d5d R09: 0000000000000001 [ 217.381078][ T1635] R10: 0000000000000001 R11: ffffed101b440d5c R12: ffff8880bffcc000 [ 217.382023][ T1635] R13: ffff8880bffcc088 R14: 0000000000000000 R15: ffff8880ca675c00 [ 217.383094][ T1635] FS: 00007f060d9d1740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 217.384289][ T1635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 217.385009][ T1635] CR2: 00007faf15381dd0 CR3: 00000000d523c001 CR4: 00000000000606e0 [ 217.385940][ T1635] Call Trace: [ 217.386544][ T1635] dev_hard_start_xmit+0x160/0x740 [ 217.387114][ T1635] __dev_queue_xmit+0x1961/0x2e10 [ 217.388118][ T1635] ? check_object+0xaf/0x260 [ 217.391466][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.392017][ T1635] ? init_object+0x6b/0x80 [ 217.392629][ T1635] ? netdev_core_pick_tx+0x2e0/0x2e0 [ 217.393175][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.393727][ T1635] ? rcu_read_lock_sched_held+0x90/0xc0 [ 217.394331][ T1635] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 217.395013][ T1635] ? kasan_unpoison_shadow+0x30/0x40 [ 217.395668][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.396280][ T1635] ? __kmalloc_node_track_caller+0x3a8/0x3f0 [ 217.399007][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.400093][ T1635] ? __kmalloc_reserve.isra.46+0x2e/0xb0 [ 217.401118][ T1635] ? memset+0x1f/0x40 [ 217.402529][ T1635] ? __alloc_skb+0x317/0x500 [ 217.404915][ T1635] ? arp_xmit+0xca/0x2c0 [ ... ] Fixes: 311633b60406 ("hsr: switch ->dellink() to ->ndo_uninit()") Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-11hsr: switch ->dellink() to ->ndo_uninit()Cong Wang
Switching from ->priv_destructor to dellink() has an unexpected consequence: existing RCU readers, that is, hsr_port_get_hsr() callers, may still be able to read the port list. Instead of checking the return value of each hsr_port_get_hsr(), we can just move it to ->ndo_uninit() which is called after device unregister and synchronize_net(), and we still have RTNL lock there. Fixes: b9a1e627405d ("hsr: implement dellink to clean up resources") Fixes: edf070a0fb45 ("hsr: fix a NULL pointer deref in hsr_dev_xmit()") Reported-by: syzbot+097ef84cdc95843fbaa8@syzkaller.appspotmail.com Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05hsr: fix a NULL pointer deref in hsr_dev_xmit()Cong Wang
hsr_port_get_hsr() could return NULL and kernel could crash: BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000074b84067 P4D 8000000074b84067 PUD 7057d067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 754 Comm: a.out Not tainted 5.2.0-rc6+ #718 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:hsr_dev_xmit+0x20/0x31 Code: 48 8b 1b eb e0 5b 5d 41 5c c3 66 66 66 66 90 55 48 89 fd 48 8d be 40 0b 00 00 be 04 00 00 00 e8 ee f2 ff ff 48 89 ef 48 89 c6 <48> 8b 40 10 48 89 45 10 e8 6c 1b 00 00 31 c0 5d c3 66 66 66 66 90 RSP: 0018:ffffb5b400003c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9821b4509a88 RCX: 0000000000000000 RDX: ffff9821b4509a88 RSI: 0000000000000000 RDI: ffff9821bc3fc7c0 RBP: ffff9821bc3fc7c0 R08: 0000000000000000 R09: 00000000000c2019 R10: 0000000000000000 R11: 0000000000000002 R12: ffff9821bc3fc7c0 R13: ffff9821b4509a88 R14: 0000000000000000 R15: 000000000000006e FS: 00007fee112a1800(0000) GS:ffff9821bd800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006e9ce000 CR4: 00000000000406f0 Call Trace: <IRQ> netdev_start_xmit+0x1b/0x38 dev_hard_start_xmit+0x121/0x21e ? validate_xmit_skb.isra.0+0x19/0x1e3 __dev_queue_xmit+0x74c/0x823 ? lockdep_hardirqs_on+0x12b/0x17d ip6_finish_output2+0x3d3/0x42c ? ip6_mtu+0x55/0x5c ? mld_sendpack+0x191/0x229 mld_sendpack+0x191/0x229 mld_ifc_timer_expire+0x1f7/0x230 ? mld_dad_timer_expire+0x58/0x58 call_timer_fn+0x12e/0x273 __run_timers.part.0+0x174/0x1b5 ? mld_dad_timer_expire+0x58/0x58 ? sched_clock_cpu+0x10/0xad ? mark_lock+0x26/0x1f2 ? __lock_is_held+0x40/0x71 run_timer_softirq+0x26/0x48 __do_softirq+0x1af/0x392 irq_exit+0x53/0xa2 smp_apic_timer_interrupt+0x1c4/0x1d9 apic_timer_interrupt+0xf/0x20 </IRQ> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05hsr: implement dellink to clean up resourcesCong Wang
hsr_link_ops implements ->newlink() but not ->dellink(), which leads that resources not released after removing the device, particularly the entries in self_node_db and node_db. So add ->dellink() implementation to replace the priv_destructor. This also makes the code slightly easier to understand. Reported-by: syzbot+c6167ec3de7def23d1e8@syzkaller.appspotmail.com Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05hsr: fix a memory leak in hsr_del_port()Cong Wang
hsr_del_port() should release all the resources allocated in hsr_add_port(). As a consequence of this change, hsr_for_each_port() is no longer safe to work with hsr_del_port(), switch to list_for_each_entry_safe() as we always hold RTNL lock. Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23hsr: fix don't prune the master node from the node_dbAndreas Oetken
Don't prune the master node in the hsr_prune_nodes function. Neither time_in[HSR_PT_SLAVE_A] nor time_in[HSR_PT_SLAVE_B] will ever be updated by hsr_register_frame_in for the master port. Thus, the master node will be repeatedly pruned leading to repeated packet loss. This bug never appeared because the hsr_prune_nodes function was only called once. Since commit 5150b45fd355 ("net: hsr: Fix node prune function for forget time expiry") this issue is fixed unveiling the issue described above. Fixes: 5150b45fd355 ("net: hsr: Fix node prune function for forget time expiry") Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: hsr: add tx stats for master interfaceMurali Karicheri
Add tx stats to hsr interface. Without this ifconfig for hsr interface doesn't show tx packet stats. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: hsr: fix debugfs path to support multiple interfacesMurali Karicheri
Fix the path of hsr debugfs root directory to use the net device name so that it can work with multiple interfaces. While at it, also fix some typos. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: hsr: fix naming of file and functionsMurali Karicheri
Fix the file name and functions to match with existing implementation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: Fix node prune function for forget time expiryAaron Kramer
HSR should forget nodes after configured node forget time expiry based on HSR_NODE_FORGET_TIME. As part of hsr_prune_nodes(), code checks to see if entries are to be flushed out if not heard for longer than forget time. But currently hsr_prune_nodes() is called only once during device creation. Restart the timer at the end of hsr_prune_nodes() so that hsr_prune_nodes() gets called periodically and forgotten entries are removed from node table. Signed-off-by: Aaron Kramer <a-kramer@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: add debugfs support for display node listMurali Karicheri
This adds a debugfs interface to allow display the nodes learned by the hsr master. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: convert to SPDX identifierMurali Karicheri
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: add blank line after function declarationMurali Karicheri
Add a blank line after function declaration as suggested by checkpatch.pl -f Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: remove camel case usage in the codeMurali Karicheri
Current driver code uses camel case in many places. This is seen when ran checkpatch.pl -f on files under net/hsr. This patch fixes the code to remove camel case usage. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: add missing space around operator in codeMurali Karicheri
This patch add missing space around operator in code. This is seen when ran checkpatch.pl -f on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix placement of logical operator in a multi-line statementMurali Karicheri
In a multi-line statement exceeding 80 characters, logical operator should be at the end of a line instead of being at the start. This is seen when ran checkpatch.pl -f on files under net/hsr. The change is per suggestion from checkpatch. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: remove unnecessary space after a castMurali Karicheri
This patch removes unnecessary space after a cast. This is seen when ran checkpatch.pl -f on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix NULL checks in the codeMurali Karicheri
This patch replaces all instance of NULL checks such as if (foo == NULL) with if (!foo) Also if (foo != NULL) with if (foo) This is seen when ran checkpatch.pl -f on files under net/hsr and suggestion is to replace as above. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix lines that ends with a '('Murali Karicheri
This patch fixes function calls that ends with '(' in a line. This is seen when ran checkpatch.pl -f option on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>