summaryrefslogtreecommitdiff
path: root/net/ipv4/devinet.c
AgeCommit message (Collapse)Author
2024-02-18ipv4: properly combine dev_base_seq and ipv4.dev_addr_genidEric Dumazet
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 0465277f6b3f ("ipv4: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-08net: ipv4: fix one memleak in __inet_del_ifa()Liu Jian
I got the below warning when do fuzzing test: unregister_netdevice: waiting for bond0 to become free. Usage count = 2 It can be repoduced via: ip link add bond0 type bond sysctl -w net.ipv4.conf.bond0.promote_secondaries=1 ip addr add 4.117.174.103/0 scope 0x40 dev bond0 ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0 ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0 ip addr del 4.117.174.103/0 scope 0x40 dev bond0 ip link delete bond0 type bond In this reproduction test case, an incorrect 'last_prim' is found in __inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40) is lost. The memory of the secondary address is leaked and the reference of in_device and net_device is leaked. Fix this problem: Look for 'last_prim' starting at location of the deleted IP and inserting the promoted IP into the location of 'last_prim'. Fixes: 0ff60a45678e ("[IPV4]: Fix secondary IP addresses after promotion") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-29Merge tag 'sysctl-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "Long ago we set out to remove the kitchen sink on kernel/sysctl.c arrays and placings sysctls to their own sybsystem or file to help avoid merge conflicts. Matthew Wilcox pointed out though that if we're going to do that we might as well also *save* space while at it and try to remove the extra last sysctl entry added at the end of each array, a sentintel, instead of bloating the kernel by adding a new sentinel with each array moved. Doing that was not so trivial, and has required slowing down the moves of kernel/sysctl.c arrays and measuring the impact on size by each new move. The complex part of the effort to help reduce the size of each sysctl is being done by the patient work of el señor Don Joel Granados. A lot of this is truly painful code refactoring and testing and then trying to measure the savings of each move and removing the sentinels. Although Joel already has code which does most of this work, experience with sysctl moves in the past shows is we need to be careful due to the slew of odd build failures that are possible due to the amount of random Kconfig options sysctls use. To that end Joel's work is split by first addressing the major housekeeping needed to remove the sentinels, which is part of this merge request. The rest of the work to actually remove the sentinels will be done later in future kernel releases. The preliminary math is showing this will all help reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array where we are able to remove each sentinel in the future. That also means there is no more bloating the kernel with the extra ~64 bytes per array moved as no new sentinels are created" * tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: Use ctl_table_size as stopping criteria for list macro sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl vrf: Update to register_net_sysctl_sz networking: Update to register_net_sysctl_sz netfilter: Update to register_net_sysctl_sz ax.25: Update to register_net_sysctl_sz sysctl: Add size to register_net_sysctl function sysctl: Add size arg to __register_sysctl_init sysctl: Add size to register_sysctl sysctl: Add a size arg to __register_sysctl_table sysctl: Add size argument to init_header sysctl: Add ctl_table_size to ctl_table_header sysctl: Use ctl_table_header in list_for_each_table_entry sysctl: Prefer ctl_table_header in proc_sysctl
2023-08-21IPv4: add extack info for IPv4 address add/deleteHangbin Liu
Add extack info for IPv4 address add/delete, which would be useful for users to understand the problem without having to read kernel code. No extack message for the ifa_local checking in __inet_insert_ifa() as it has been checked in find_matching_ifa(). Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-15networking: Update to register_net_sysctl_szJoel Granados
Move from register_net_sysctl to register_net_sysctl_sz for all the networking related files. Do this while making sure to mirror the NULL assignments with a table_size of zero for the unprivileged users. We need to move to the new function in preparation for when we change SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do so would erroneously allow ARRAY_SIZE() to be called on a pointer. We hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all the relevant net sysctl registering functions to register_net_sysctl_sz in subsequent commits. An additional size function was added to the following files in order to calculate the size of an array that is defined in another file: include/net/ipv6.h net/ipv6/icmp.c net/ipv6/route.c net/ipv6/sysctl_net_ipv6.c Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-23net: ipv4: Allow changing IPv4 address protocolPetr Machata
When IP address protocol field was added in commit 47f0bd503210 ("net: Add new protocol attribute to IP addresses"), the semantics included the ability to change the protocol for IPv6 addresses, but not for IPv4 addresses. It seems this was not deliberate, but rather by accident. A userspace that wants to change the protocol of an address might drop and recreate the address, but that disrupts routing and is just impractical. So in this patch, when an IPv4 address is replaced (through RTM_NEWADDR request with NLM_F_REPLACE flag), update the proto at the address to the one given in the request, or zero if none is given. This matches the behavior of IPv6. Previously, any new value given was simply ignored. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-30net: devinet: Reduce refcount before grace periodEric Dumazet
Currently, the inetdev_destroy() function waits for an RCU grace period before decrementing the refcount and freeing memory. This causes a delay with a new RCU configuration that tries to save power, which results in the network interface disappearing later than expected. The resulting delay causes test failures on ChromeOS. Refactor the code such that the refcount is freed before the grace period and memory is freed after. With this a ChromeOS network test passes that does 'ip netns del' and polls for an interface disappearing, now passes. Reported-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: David Ahern <dsahern@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: <netdev@vger.kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-24net: Fix data-races around sysctl_devconf_inherit_init_net.Kuniyuki Iwashima
While reading sysctl_devconf_inherit_init_net, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-09net: rename reference+tracking helpersJakub Kicinski
Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-25Merge tag 'net-next-5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core ---- - Support TCPv6 segmentation offload with super-segments larger than 64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP). - Generalize skb freeing deferral to per-cpu lists, instead of per-socket lists. - Add a netdev statistic for packets dropped due to L2 address mismatch (rx_otherhost_dropped). - Continue work annotating skb drop reasons. - Accept alternative netdev names (ALT_IFNAME) in more netlink requests. - Add VLAN support for AF_PACKET SOCK_RAW GSO. - Allow receiving skb mark from the socket as a cmsg. - Enable memcg accounting for veth queues, sysctl tables and IPv6. BPF --- - Add libbpf support for User Statically-Defined Tracing (USDTs). - Speed up symbol resolution for kprobes multi-link attachments. - Support storing typed pointers to referenced and unreferenced objects in BPF maps. - Add support for BPF link iterator. - Introduce access to remote CPU map elements in BPF per-cpu map. - Allow middle-of-the-road settings for the kernel.unprivileged_bpf_disabled sysctl. - Implement basic types of dynamic pointers e.g. to allow for dynamically sized ringbuf reservations without extra memory copies. Protocols --------- - Retire port only listening_hash table, add a second bind table hashed by port and address. Avoid linear list walk when binding to very popular ports (e.g. 443). - Add bridge FDB bulk flush filtering support allowing user space to remove all FDB entries matching a condition. - Introduce accept_unsolicited_na sysctl for IPv6 to implement router-side changes for RFC9131. - Support for MPTCP path manager in user space. - Add MPTCP support for fallback to regular TCP for connections that have never connected additional subflows or transmitted out-of-sequence data (partial support for RFC8684 fallback). - Avoid races in MPTCP-level window tracking, stabilize and improve throughput. - Support lockless operation of GRE tunnels with seq numbers enabled. - WiFi support for host based BSS color collision detection. - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets. - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2). - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile). - Allow matching on the number of VLAN tags via tc-flower. - Add tracepoint for tcp_set_ca_state(). Driver API ---------- - Improve error reporting from classifier and action offload. - Add support for listing line cards in switches (devlink). - Add helpers for reporting page pool statistics with ethtool -S. - Add support for reading clock cycles when using PTP virtual clocks, instead of having the driver convert to time before reporting. This makes it possible to report time from different vclocks. - Support configuring low-latency Tx descriptor push via ethtool. - Separate Clause 22 and Clause 45 MDIO accesses more explicitly. New hardware / drivers ---------------------- - Ethernet: - Marvell's Octeon NIC PCI Endpoint support (octeon_ep) - Sunplus SP7021 SoC (sp7021_emac) - Add support for Renesas RZ/V2M (in ravb) - Add support for MediaTek mt7986 switches (in mtk_eth_soc) - Ethernet PHYs: - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting) - TI DP83TD510 PHY - Microchip LAN8742/LAN88xx PHYs - WiFi: - Driver for pureLiFi X, XL, XC devices (plfxlc) - Driver for Silicon Labs devices (wfx) - Support for WCN6750 (in ath11k) - Support Realtek 8852ce devices (in rtw89) - Mobile: - MediaTek T700 modems (Intel 5G 5000 M.2 cards) - CAN: - ctucanfd: add support for CTU CAN FD open-source IP core from Czech Technical University in Prague Drivers ------- - Delete a number of old drivers still using virt_to_bus(). - Ethernet NICs: - intel: support TSO on tunnels MPLS - broadcom: support multi-buffer XDP - nfp: support VF rate limiting - sfc: use hardware tx timestamps for more than PTP - mlx5: multi-port eswitch support - hyper-v: add support for XDP_REDIRECT - atlantic: XDP support (including multi-buffer) - macb: improve real-time perf by deferring Tx processing to NAPI - High-speed Ethernet switches: - mlxsw: implement basic line card information querying - prestera: add support for traffic policing on ingress and egress - Embedded Ethernet switches: - lan966x: add support for packet DMA (FDMA) - lan966x: add support for PTP programmable pins - ti: cpsw_new: enable bc/mc storm prevention - Qualcomm 802.11ax WiFi (ath11k): - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - enable keep-alive during WoWLAN suspend - implement remain-on-channel support - MediaTek WiFi (mt76): - support Wireless Ethernet Dispatch offloading packet movement between the Ethernet switch and WiFi interfaces - non-standard VHT MCS10-11 support - mt7921 AP mode support - mt7921 IPv6 NS offload support - Ethernet PHYs: - micrel: ksz9031/ksz9131: cabletest support - lan87xx: SQI support for T1 PHYs - lan937x: add interrupt support for link detection" * tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits) ptp: ocp: Add firmware header checks ptp: ocp: fix PPS source selector debugfs reporting ptp: ocp: add .init function for sma_op vector ptp: ocp: vectorize the sma accessor functions ptp: ocp: constify selectors ptp: ocp: parameterize input/output sma selectors ptp: ocp: revise firmware display ptp: ocp: add Celestica timecard PCI ids ptp: ocp: Remove #ifdefs around PCI IDs ptp: ocp: 32-bit fixups for pci start address Revert "net/smc: fix listen processing for SMC-Rv2" ath6kl: Use cc-disable-warning to disable -Wdangling-pointer selftests/bpf: Dynptr tests bpf: Add dynptr data slices bpf: Add bpf_dynptr_read and bpf_dynptr_write bpf: Dynptr support for ring buffers bpf: Add bpf_dynptr_from_mem for local dynptrs bpf: Add verifier support for dynptrs bpf: Suppress 'passing zero to PTR_ERR' warning bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack ...
2022-05-18random32: use real rng for non-deterministic randomnessJason A. Donenfeld
random32.c has two random number generators in it: one that is meant to be used deterministically, with some predefined seed, and one that does the same exact thing as random.c, except does it poorly. The first one has some use cases. The second one no longer does and can be replaced with calls to random.c's proper random number generator. The relatively recent siphash-based bad random32.c code was added in response to concerns that the prior random32.c was too deterministic. Out of fears that random.c was (at the time) too slow, this code was anonymously contributed. Then out of that emerged a kind of shadow entropy gathering system, with its own tentacles throughout various net code, added willy nilly. Stop👏making👏bespoke👏random👏number👏generators👏. Fortunately, recent advances in random.c mean that we can stop playing with this sketchiness, and just use get_random_u32(), which is now fast enough. In micro benchmarks using RDPMC, I'm seeing the same median cycle count between the two functions, with the mean being _slightly_ higher due to batches refilling (which we can optimize further need be). However, when doing *real* benchmarks of the net functions that actually use these random numbers, the mean cycles actually *decreased* slightly (with the median still staying the same), likely because the additional prandom code means icache misses and complexity, whereas random.c is generally already being used by something else nearby. The biggest benefit of this is that there are many users of prandom who probably should be using cryptographically secure random numbers. This makes all of those accidental cases become secure by just flipping a switch. Later on, we can do a tree-wide cleanup to remove the static inline wrapper functions that this commit adds. There are also some low-ish hanging fruits for making this even faster in the future: a get_random_u16() function for use in the networking stack will give a 2x performance boost there, using SIMD for ChaCha20 will let us compute 4 or 8 or 16 blocks of output in parallel, instead of just one, giving us large buffers for cheap, and introducing a get_random_*_bh() function that assumes irqs are already disabled will shave off a few cycles for ordinary calls. These are things we can chip away at down the road. Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-04memcg: accounting for objects allocated for new netdeviceVasily Averin
Creating a new netdevice allocates at least ~50Kb of memory for various kernel objects, but only ~5Kb of them are accounted to memcg. As a result, creating an unlimited number of netdevice inside a memcg-limited container does not fall within memcg restrictions, consumes a significant part of the host's memory, can cause global OOM and lead to random kills of host processes. The main consumers of non-accounted memory are: ~10Kb 80+ kernfs nodes ~6Kb ipv6_add_dev() allocations 6Kb __register_sysctl_table() allocations 4Kb neigh_sysctl_register() allocations 4Kb __devinet_sysctl_register() allocations 4Kb __addrconf_sysctl_register() allocations Accounting of these objects allows to increase the share of memcg-related memory up to 60-70% (~38Kb accounted vs ~54Kb total for dummy netdevice on typical VM with default Fedora 35 kernel) and this should be enough to somehow protect the host from misuse inside container. Other related objects are quite small and may not be taken into account to minimize the expected performance degradation. It should be separately mentonied ~300 bytes of percpu allocation of struct ipstats_mib in snmp6_alloc_dev(), on huge multi-cpu nodes it can become the main consumer of memory. This patch does not enables kernfs accounting as it affects other parts of the kernel and should be discussed separately. However, even without kernfs, this patch significantly improves the current situation and allows to take into account more than half of all netdevice allocations. Signed-off-by: Vasily Averin <vvs@openvz.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/354a0a5f-9ec3-a25c-3215-304eab2157bc@openvz.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-18net: Add new protocol attribute to IP addressesJacques de Laval
This patch adds a new protocol attribute to IPv4 and IPv6 addresses. Inspiration was taken from the protocol attribute of routes. User space applications like iproute2 can set/get the protocol with the Netlink API. The attribute is stored as an 8-bit unsigned integer. The protocol attribute is set by kernel for these categories: - IPv4 and IPv6 loopback addresses - IPv6 addresses generated from router announcements - IPv6 link local addresses User space may pass custom protocols, not defined by the kernel. Grouping addresses on their origin is useful in scenarios where you want to distinguish between addresses based on who added them, e.g. kernel vs. user space. Tagging addresses with a string label is an existing feature that could be used as a solution. Unfortunately the max length of a label is 15 characters, and for compatibility reasons the label must be prefixed with the name of the device followed by a colon. Since device names also have a max length of 15 characters, only -1 characters is guaranteed to be available for any origin tag, which is not that much. A reference implementation of user space setting and getting protocols is available for iproute2: https://github.com/westermo/iproute2/commit/9a6ea18bd79f47f293e5edc7780f315ea42ff540 Signed-off-by: Jacques de Laval <Jacques.De.Laval@westermo.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220217150202.80802-1-Jacques.De.Laval@westermo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06ipv4: add net device refcount tracker to struct in_deviceEric Dumazet
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-15net: return correct error codeliuguoqiang
When kmemdup called failed and register_net_sysctl return NULL, should return ENOMEM instead of ENOBUFS Signed-off-by: liuguoqiang <liuguoqiang@uniontech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: arp: introduce arp_evict_nocarrier sysctl parameterJames Prestwood
This change introduces a new sysctl parameter, arp_evict_nocarrier. When set (default) the ARP cache will be cleared on a NOCARRIER event. This new option has been defaulted to '1' which maintains existing behavior. Clearing the ARP cache on NOCARRIER is relatively new, introduced by: commit 859bd2ef1fc1110a8031b967ee656c53a6260a76 Author: David Ahern <dsahern@gmail.com> Date: Thu Oct 11 20:33:49 2018 -0700 net: Evict neighbor entries on carrier down The reason for this changes is to prevent the ARP cache from being cleared when a wireless device roams. Specifically for wireless roams the ARP cache should not be cleared because the underlying network has not changed. Clearing the ARP cache in this case can introduce significant delays sending out packets after a roam. A user reported such a situation here: https://lore.kernel.org/linux-wireless/CACsRnHWa47zpx3D1oDq9JYnZWniS8yBwW1h0WAVZ6vrbwL_S0w@mail.gmail.com/ After some investigation it was found that the kernel was holding onto packets until ARP finished which resulted in this 1 second delay. It was also found that the first ARP who-has was never responded to, which is actually what caues the delay. This change is more or less working around this behavior, but again, there is no reason to clear the cache on a roam anyways. As for the unanswered who-has, we know the packet made it OTA since it was seen while monitoring. Why it never received a response is unknown. In any case, since this is a problem on the AP side of things all that can be done is to work around it until it is solved. Some background on testing/reproducing the packet delay: Hardware: - 2 access points configured for Fast BSS Transition (Though I don't see why regular reassociation wouldn't have the same behavior) - Wireless station running IWD as supplicant - A device on network able to respond to pings (I used one of the APs) Procedure: - Connect to first AP - Ping once to establish an ARP entry - Start a tcpdump - Roam to second AP - Wait for operstate UP event, and note the timestamp - Start pinging Results: Below is the tcpdump after UP. It was recorded the interface went UP at 10:42:01.432875. 10:42:01.461871 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28 10:42:02.497976 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28 10:42:02.507162 ARP, Reply 192.168.254.1 is-at ac:86:74:55:b0:20, length 46 10:42:02.507185 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 1, length 64 10:42:02.507205 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 2, length 64 10:42:02.507212 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 3, length 64 10:42:02.507219 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 4, length 64 10:42:02.507225 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 5, length 64 10:42:02.507232 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 6, length 64 10:42:02.515373 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 1, length 64 10:42:02.521399 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 2, length 64 10:42:02.521612 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 3, length 64 10:42:02.521941 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 4, length 64 10:42:02.522419 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 5, length 64 10:42:02.523085 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 6, length 64 You can see the first ARP who-has went out very quickly after UP, but was never responded to. Nearly a second later the kernel retries and gets a response. Only then do the ping packets go out. If an ARP entry is manually added prior to UP (after the cache is cleared) it is seen that the first ping is never responded to, so its not only an issue with ARP but with data packets in general. As mentioned prior, the wireless interface was also monitored to verify the ping/ARP packet made it OTA which was observed to be true. Signed-off-by: James Prestwood <prestwoj@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-04net: add extack arg for link opsRocco Yue
Pass extack arg to validate_linkmsg and validate_link_af callbacks. If a netlink attribute has a reject_message, use the extended ack mechanism to carry the message back to user space. Signed-off-by: Rocco Yue <rocco.yue@mediatek.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23net: socket: remove register_gifconfArnd Bergmann
Since dynamic registration of the gifconf() helper is only used for IPv4, and this can not be in a loadable module, this can be simplified noticeably by turning it into a direct function call as a preparation for cleaning up the compat handling. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: ipv4: add capability check for net administrationYang Yang
Root in init user namespace can modify /proc/sys/net/ipv4/ip_forward without CAP_NET_ADMIN, this doesn't follow the principle of capabilities. For example, let's take a look at netdev_store(), root can't modify netdev attribute without CAP_NET_ADMIN. So let's keep the consistency of permission check logic. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20memcg: enable accounting for IP address and routing-related objectsVasily Averin
An netadmin inside container can use 'ip a a' and 'ip r a' to assign a large number of ipv4/ipv6 addresses and routing entries and force kernel to allocate megabytes of unaccounted memory for long-lived per-netdevice related kernel objects: 'struct in_ifaddr', 'struct inet6_ifaddr', 'struct fib6_node', 'struct rt6_info', 'struct fib_rules' and ip_fib caches. These objects can be manually removed, though usually they lives in memory till destroy of its net namespace. It makes sense to account for them to restrict the host's memory consumption from inside the memcg-limited container. One of such objects is the 'struct fib6_node' mostly allocated in net/ipv6/route.c::__ip6_ins_rt() inside the lock_bh()/unlock_bh() section: write_lock_bh(&table->tb6_lock); err = fib6_add(&table->tb6_root, rt, info, mxc); write_unlock_bh(&table->tb6_lock); In this case it is not enough to simply add SLAB_ACCOUNT to corresponding kmem cache. The proper memory cgroup still cannot be found due to the incorrect 'in_interrupt()' check used in memcg_kmem_bypass(). Obsoleted in_interrupt() does not describe real execution context properly. >From include/linux/preempt.h: The following macros are deprecated and should not be used in new code: in_interrupt() - We're in NMI,IRQ,SoftIRQ context or have BH disabled To verify the current execution context new macro should be used instead: in_task() - We're in task context Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-08net: ipv4: Remove unneed BUG() functionZheng Yongjun
When 'nla_parse_nested_deprecated' failed, it's no need to BUG() here, return -EINVAL is ok. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10rtnetlink: avoid RCU read lock when holding RTNLCong Wang
When we call af_ops->set_link_af() we hold a RCU read lock as we retrieve af_ops from the RCU protected list, but this is unnecessary because we already hold RTNL lock, which is the writer lock for protecting rtnl_af_ops, so it is safer than RCU read lock. Similar for af_ops->validate_link_af(). This was not a problem until we begin to take mutex lock down the path of ->set_link_af() in __ipv6_dev_mc_dec() recently. We can just drop the RCU read lock there and assert RTNL lock. Reported-and-tested-by: syzbot+7d941e89dd48bcf42573@syzkaller.appspotmail.com Fixes: 63ed8de4be81 ("mld: add mc_lock for protecting per-interface mld data") Tested-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08ipv6: report errors for iftoken via netlink extackStephen Hemminger
Setting iftoken can fail for several different reasons but there and there was no report to user as to the cause. Add netlink extended errors to the processing of the request. This requires adding additional argument through rtnl_af_ops set_link_af callback. Reported-by: Hongren Zheng <li@zenithal.me> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-16treewide: rename nla_strlcpy to nla_strscpy.Francis Laniel
Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new name of this function. Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10net: ipv4: remove redundant initialization in inet_rtm_deladdrMenglong Dong
The initialization for 'err' with '-EINVAL' is redundant and can be removed, as it is updated soon. Changes since v1: - Remove redundant empty line Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Link: https://lore.kernel.org/r/20201108010541.12432-1-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30devinet: fix memleak in inetdev_init()Yang Yingliang
When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed. Fixes: 20e61da7ffcf ("ipv4: fail early when creating netdev named all or default") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16netns: enable to inherit devconf from current netnsNicolas Dichtel
The goal is to be able to inherit the initial devconf parameters from the current netns, ie the netns where this new netns has been created. This is useful in a containers environment where /proc/sys is read only. For example, if a pod is created with specifics devconf parameters and has the capability to create netns, the user expects to get the same parameters than his 'init_net', which is not the real init_net in this case. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-28Merge branch 'work.sysctl' of ↵Daniel Borkmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler methods to take kernel pointers instead. It gets rid of the set_fs address space overrides used by BPF. As per discussion, pull in the feature branch into bpf-next as it relates to BPF sysctl progs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-09net: ipv4: devinet: Fix crash when add/del multicast IP with autojoinTaras Chornyi
When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device with autojoin flag or when multicast ip is deleted kernel will crash. steps to reproduce: ip addr add 224.0.0.0/32 dev eth0 ip addr del 224.0.0.0/32 dev eth0 or ip addr add 224.0.0.0/32 dev eth0 autojoin Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 pc : _raw_write_lock_irqsave+0x1e0/0x2ac lr : lock_sock_nested+0x1c/0x60 Call trace: _raw_write_lock_irqsave+0x1e0/0x2ac lock_sock_nested+0x1c/0x60 ip_mc_config.isra.28+0x50/0xe0 inet_rtm_deladdr+0x1a8/0x1f0 rtnetlink_rcv_msg+0x120/0x350 netlink_rcv_skb+0x58/0x120 rtnetlink_rcv+0x14/0x20 netlink_unicast+0x1b8/0x270 netlink_sendmsg+0x1a0/0x3b0 ____sys_sendmsg+0x248/0x290 ___sys_sendmsg+0x80/0xc0 __sys_sendmsg+0x68/0xc0 __arm64_sys_sendmsg+0x20/0x30 el0_svc_common.constprop.2+0x88/0x150 do_el0_svc+0x20/0x80 el0_sync_handler+0x118/0x190 el0_sync+0x140/0x180 Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on") Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12inet: Use fallthrough;Joe Perches
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ And by hand: net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block that causes gcc to emit a warning if converted in-place. So move the new fallthrough; inside the containing #ifdef/#endif too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07inet: protect against too small mtu values.Eric Dumazet
syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01ipv4: don't set IPv6 only flags to IPv4 addressesMatteo Croce
Avoid the situation where an IPV6 only flag is applied to an IPv4 address: # ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global noprefixroute dummy0 valid_lft forever preferred_lft forever Or worse, by sending a malicious netlink command: # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0 valid_lft forever preferred_lft forever Signed-off-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: ipv4: fix infinite loop on secondary addr promotionFlorian Westphal
secondary address promotion causes infinite loop -- it arranges for ifa->ifa_next to point back to itself. Problem is that 'prev_prom' and 'last_prim' might point at the same entry, so 'last_sec' pointer must be obtained after prev_prom->next update. Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Reported-by: Ran Rozenstein <ranro@mellanox.com> Reported-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24ipv4: fix confirm_addr_indev() when enable route_localnetShijie Luo
When arp_ignore=3, the NIC won't reply for scope host addresses, but if enable route_locanet, we need to reply ip address with head 127 and scope RT_SCOPE_HOST. Fixes: d0daebc3d622 ("ipv4: Add interface option to enable routing of 127.0.0.0/8") Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24ipv4: fix inet_select_addr() when enable route_localnetShijie Luo
Suppose we have two interfaces eth0 and eth1 in two hosts, follow the same steps in the two hosts: # sysctl -w net.ipv4.conf.eth1.route_localnet=1 # sysctl -w net.ipv4.conf.eth1.arp_announce=2 # ip route del 127.0.0.0/8 dev lo table local and then set ip to eth1 in host1 like: # ifconfig eth1 127.25.3.4/24 set ip to eth2 in host2 and ping host1: # ifconfig eth1 127.25.3.14/24 # ping -I eth1 127.25.3.4 Well, host2 cannot connect to host1. When set a ip address with head 127, the scope of the address defaults to RT_SCOPE_HOST. In this situation, host2 will use arp_solicit() to send a arp request for the mac address of host1 with ip address 127.25.3.14. When arp_announce=2, inet_select_addr() cannot select a correct saddr with condition ifa->ifa_scope > scope, because ifa_scope is RT_SCOPE_HOST and scope is RT_SCOPE_LINK. Then, inet_select_addr() will go to no_in_dev to lookup all interfaces to find a primary ip and finally get the primary ip of eth0. Here I add a localnet_scope defaults to RT_SCOPE_HOST, and when route_localnet is enabled, this value changes to RT_SCOPE_LINK to make inet_select_addr() find a correct primary ip as saddr of arp request. Fixes: d0daebc3d622 ("ipv4: Add interface option to enable routing of 127.0.0.0/8") Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17net: ipv4: remove erroneous advancement of list pointerFlorian Westphal
Causes crash when lifetime expires on an adress as garbage is dereferenced soon after. This used to look like this: for (ifap = &ifa->ifa_dev->ifa_list; *ifap != NULL; ifap = &(*ifap)->ifa_next) { if (*ifap == ifa) ... but this was changed to: struct in_ifaddr *tmp; ifap = &ifa->ifa_dev->ifa_list; tmp = rtnl_dereference(*ifap); while (tmp) { tmp = rtnl_dereference(tmp->ifa_next); // Bogus if (rtnl_dereference(*ifap) == ifa) { ... ifap = &tmp->ifa_next; // Can be NULL tmp = rtnl_dereference(*ifap); // Dereference } } Remove the bogus assigment/list entry skip. Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04net: ipv4: fix rcu lockdep splat due to wrong annotationFlorian Westphal
syzbot triggered following splat when strict netlink validation is enabled: net/ipv4/devinet.c:1766 suspicious rcu_dereference_check() usage! This occurs because we hold RTNL mutex, but no rcu read lock. The second call site holds both, so just switch to the _rtnl variant. Reported-by: syzbot+bad6e32808a3a97b1515@syzkaller.appspotmail.com Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-02net: ipv4: provide __rcu annotation for ifa_listFlorian Westphal
ifa_list is protected by rcu, yet code doesn't reflect this. Add the __rcu annotations and fix up all places that are now reported by sparse. I've done this in the same commit to not add intermediate patches that result in new warnings. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-02devinet: use in_dev_for_each_ifa_rcu in more placesFlorian Westphal
This also replaces spots that used for_primary_ifa(). for_primary_ifa() aborts the loop on the first secondary address seen. Replace it with either the rcu or rtnl variant of in_dev_for_each_ifa(), but two places will now also consider secondary addresses too: inet_addr_onlink() and inet_ifa_byprefix(). I do not understand why they should ignore secondary addresses. Why would a secondary address not be considered 'on link'? When matching a prefix, why ignore a matching secondary address? Other places get converted as well, but gain "->flags & SECONDARY" check. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-02net: inetdevice: provide replacement iterators for in_ifaddr walkFlorian Westphal
The ifa_list is protected either by rcu or rtnl lock, but the current iterators do not account for this. This adds two iterators as replacement, a later patch in the series will update them with the needed rcu/rtnl_dereference calls. Its not done in this patch yet to avoid sparse warnings -- the fields lack the proper __rcu annotation. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net: ignore sysctl_devconf_inherit_init_net without SYSCTLArnd Bergmann
When CONFIG_SYSCTL is turned off, we get a link failure for the newly introduced tuning knob. net/ipv6/addrconf.o: In function `addrconf_init_net': addrconf.c:(.text+0x31dc): undefined reference to `sysctl_devconf_inherit_init_net' Add an IS_ENABLED() check to fall back to the default behavior (sysctl_devconf_inherit_init_net=0) here. Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: introduce a knob to control whether to inherit devconf configCong Wang
There have been many people complaining about the inconsistent behaviors of IPv4 and IPv6 devconf when creating new network namespaces. Currently, for IPv4, we inherit all current settings from init_net, but for IPv6 we reset all setting to default. This patch introduces a new /proc file /proc/sys/net/core/devconf_inherit_init_net to control the behavior of whether to inhert sysctl current settings from init_net. This file itself is only available in init_net. As demonstrated below: Initial setup in init_net: # cat /proc/sys/net/ipv4/conf/all/rp_filter 2 # cat /proc/sys/net/ipv6/conf/all/accept_dad 1 Default value 0 (current behavior): # ip netns del test # ip netns add test # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter 2 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad 0 Set to 1 (inherit from init_net): # echo 1 > /proc/sys/net/core/devconf_inherit_init_net # ip netns del test # ip netns add test # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter 2 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad 1 Set to 2 (reset to default): # echo 2 > /proc/sys/net/core/devconf_inherit_init_net # ip netns del test # ip netns add test # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter 0 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad 0 Set to a value out of range (invalid): # echo 3 > /proc/sys/net/core/devconf_inherit_init_net -bash: echo: write error: Invalid argument # echo -1 > /proc/sys/net/core/devconf_inherit_init_net -bash: echo: write error: Invalid argument Reported-by: Zhu Yanjun <Yanjun.Zhu@windriver.com> Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: ipv4: netconf: perform strict checks also for doit handlersJakub Kicinski
Make RTM_GETNETCONF's doit handler use strict checks when NETLINK_F_STRICT_CHK is set. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-05 18:41:44 +0000