summaryrefslogtreecommitdiff
path: root/net/ipv4/icmp.c
AgeCommit message (Collapse)Author
2017-10-24ipv4: icmp: use BUG_ON instead of if condition followed by BUGGustavo A. R. Silva
Use BUG_ON instead of if condition followed by BUG in icmp_timestamp. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14icmp: don't fail on fragment reassembly time exceededMatteo Croce
The ICMP implementation currently replies to an ICMP time exceeded message (type 11) with an ICMP host unreachable message (type 3, code 1). However, time exceeded messages can either represent "time to live exceeded in transit" (code 0) or "fragment reassembly time exceeded" (code 1). Unconditionally replying to "fragment reassembly time exceeded" with host unreachable messages might cause unjustified connection resets which are now easily triggered as UFO has been removed, because, in turn, sending large buffers triggers IP fragmentation. The issue can be easily reproduced by running a lot of UDP streams which is likely to trigger IP fragmentation: # start netserver in the test namespace ip netns add test ip netns exec test netserver # create a VETH pair ip link add name veth0 type veth peer name veth0 netns test ip link set veth0 up ip -n test link set veth0 up for i in $(seq 20 29); do # assign addresses to both ends ip addr add dev veth0 192.168.$i.1/24 ip -n test addr add dev veth0 192.168.$i.2/24 # start the traffic netperf -L 192.168.$i.1 -H 192.168.$i.2 -t UDP_STREAM -l 0 & done # wait send_data: data send error: No route to host (errno 113) netperf: send_omni: send_data failed: No route to host We need to differentiate instead: if fragment reassembly time exceeded is reported, we need to silently drop the packet, if time to live exceeded is reported, maintain the current behaviour. In both cases increment the related error count "icmpInTimeExcds". While at it, fix a typo in a comment, and convert the if statement into a switch to mate it more readable. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06ip/options: explicitly provide net ns to __ip_options_echo()Paolo Abeni
__ip_options_echo() uses the current network namespace, and currently retrives it via skb->dst->dev. This commit adds an explicit 'net' argument to __ip_options_echo() and update all the call sites to provide it, usually via a simpler sock_net(). After this change, __ip_options_echo() no more needs to access skb->dst and we can drop a couple of hack to preserve such info in the rx path. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14net: don't global ICMP rate limit packets originating from loopbackJesper Dangaard Brouer
Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by: Florian Weimer <fweimer@redhat.com> Reported-by: "H.J. Lu" <hjl.tools@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26net: ipv4: refactor __ip_route_output_key_hashDavid Ahern
A later patch wants access to the fib result on an output route lookup with the rcu lock held. Refactor __ip_route_output_key_hash, pushing the logic between rcu_read_lock ... rcu_read_unlock into a new helper with the fib_result as an input arg. To keep the name length under control remove the leading underscores from the name and add _rcu to the name of the new helper indicating it is called with the rcu read lock held. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: ipv4: add support for ECMP hash policy choiceNikolay Aleksandrov
This patch adds support for ECMP hash policy choice via a new sysctl called fib_multipath_hash_policy and also adds support for L4 hashes. The current values for fib_multipath_hash_policy are: 0 - layer 3 (default) 1 - layer 4 If there's an skb hash already set and it matches the chosen policy then it will be used instead of being calculated (currently only for L4). In L3 mode we always calculate the hash due to the ICMP error special case, the flow dissector's field consistentification should handle the address order thus we can remove the address reversals. If the skb is provided we always use it for the hash calculation, otherwise we fallback to fl4, that is if skb is NULL fl4 has to be set. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: for rate-limited ICMP replies save one atomic operationJesper Dangaard Brouer
It is possible to avoid the atomic operation in icmp{v6,}_xmit_lock, by checking the sysctl_icmp_msgs_per_sec ratelimit before these calls, as pointed out by Eric Dumazet, but the BH disabled state must be correct. The icmp_global_allow() call states it must be called with BH disabled. This protection was given by the calls icmp_xmit_lock and icmpv6_xmit_lock. Thus, split out local_bh_disable/enable from these functions and maintain it explicitly at callers. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: reduce cycles spend on ICMP replies that gets rate limitedJesper Dangaard Brouer
This patch split the global and per (inet)peer ICMP-reply limiter code, and moves the global limit check to earlier in the packet processing path. Thus, avoid spending cycles on ICMP replies that gets limited/suppressed anyhow. The global ICMP rate limiter icmp_global_allow() is a good solution, it just happens too late in the process. The kernel goes through the full route lookup (return path) for the ICMP message, before taking the rate limit decision of not sending the ICMP reply. Details: The kernels global rate limiter for ICMP messages got added in commit 4cdf507d5452 ("icmp: add a global rate limitation"). It is a token bucket limiter with a global lock. It brilliantly avoids locking congestion by only updating when 20ms (HZ/50) were elapsed. It can then avoids taking lock when credit is exhausted (when under pressure) and time constraint for refill is not yet meet. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Revert "icmp: avoid allocating large struct on stack"Jesper Dangaard Brouer
This reverts commit 9a99d4a50cb8 ("icmp: avoid allocating large struct on stack"), because struct icmp_bxm no really a large struct, and allocating and free of this small 112 bytes hurts performance. Fixes: 9a99d4a50cb8 ("icmp: avoid allocating large struct on stack") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-08icmp: correct return value of icmp_rcv()Zhang Shengju
Currently, icmp_rcv() always return zero on a packet delivery upcall. To make its behavior more compliant with the way this API should be used, this patch changes this to let it return NET_RX_SUCCESS when the packet is proper handled, and NET_RX_DROP otherwise. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: icmp_route_lookup should use rt dev to determine L3 domainDavid Ahern
icmp_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have an rt. Update icmp_route_lookup to use the rt on the skb to determine L3 domain. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04net: inet: Support UID-based routing in IP protocols.Lorenzo Colitti
- Use the UID in routing lookups made by protocol connect() and sendmsg() functions. - Make sure that routing lookups triggered by incoming packets (e.g., Path MTU discovery) take the UID of the socket into account. - For packets not associated with a userspace socket, (e.g., ping replies) use UID 0 inside the user namespace corresponding to the network namespace the socket belongs to. This allows all namespaces to apply routing and iptables rules to kernel-originated traffic in that namespaces by matching UID 0. This is better than using the UID of the kernel socket that is sending the traffic, because the UID of kernel sockets created at namespace creation time (e.g., the per-processor ICMP and TCP sockets) is the UID of the user that created the socket, which might not be mapped in the namespace. Tested: compiles allnoconfig, allyesconfig, allmodconfig Tested: https://android-review.googlesource.com/253302 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27net: icmp: rename ICMPMSGIN_INC_STATS_BH()Eric Dumazet
Remove misleading _BH suffix. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27net: rename ICMP_INC_STATS_BH()Eric Dumazet
Rename ICMP_INC_STATS_BH() to __ICMP_INC_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: ipv4: Convert IP network timestamps to be y2038 safeDeepa Dinamani
ICMP timestamp messages and IP source route options require timestamps to be in milliseconds modulo 24 hours from midnight UT format. Add inet_current_timestamp() function to support this. The function returns the required timestamp in network byte order. Timestamp calculation is also changed to call ktime_get_real_ts64() which uses struct timespec64. struct timespec64 is y2038 safe. Previously it called getnstimeofday() which uses struct timespec. struct timespec is not y2038 safe. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14Revert "ipv4/icmp: redirect messages can use the ingress daddr as source"Paolo Abeni
Revert the commit e2ca690b657f ("ipv4/icmp: redirect messages can use the ingress daddr as source"), which tried to introduce a more suitable behaviour for ICMP redirect messages generated by VRRP routers. However RFC 5798 section 8.1.1 states: The IPv4 source address of an ICMP redirect should be the address that the end-host used when making its next-hop routing decision. while said commit used the generating packet destination address, which do not match the above and in most cases leads to no redirect packets to be generated. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv4/icmp: redirect messages can use the ingress daddr as sourcePaolo Abeni
This patch allows configuring how the source address of ICMP redirect messages is selected; by default the old behaviour is retained, while setting icmp_redirects_use_orig_daddr force the usage of the destination address of the packet that caused the redirect. The new behaviour fits closely the RFC 5798 section 8.1.1, and fix the following scenario: Two machines are set up with VRRP to act as routers out of a subnet, they have IPs x.x.x.1/24 and x.x.x.2/24, with VRRP holding on to x.x.x.254/24. If a host in said subnet needs to get an ICMP redirect from the VRRP router, i.e. to reach a destination behind a different gateway, the source IP in the ICMP redirect is chosen as the primary IP on the interface that the packet arrived at, i.e. x.x.x.1 or x.x.x.2. The host will then ignore said redirect, due to RFC 1122 section 3.2.2.2, and will continue to use the wrong next-op. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ipv4: ICMP packet inspection for multipathPeter Nørlund
ICMP packets are inspected to let them route together with the flow they belong to, minimizing the chance that a problematic path will affect flows on other paths, and so that anycast environments can work with ECMP. Signed-off-by: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Replace vrf_master_ifindex{, _rcu} with l3mdev equivalentsDavid Ahern
Replace calls to vrf_master_ifindex_rcu and vrf_master_ifindex with either l3mdev_master_ifindex_rcu or l3mdev_master_ifindex. The pattern: oif = vrf_master_ifindex(dev) ? : dev->ifindex; is replaced with oif = l3mdev_fib_oif(dev); And remove the now unused vrf macros. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25net: Fix panic in icmp_route_lookupDavid Ahern
Andrey reported a panic: [ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4 [ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320 [ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000 [ 7249.865637] Oops: 0000 [#1] ... [ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-999-generic #201509220155 [ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014 08/02/2006 [ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000 [ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0 [ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320 [ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00 [ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974 [ 7249.867077] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0 [ 7249.867141] Stack: [ 7249.867165] 320310ee 00000000 00000042 320310ee 00000000 c1aeca00 f3920240 f0c69180 [ 7249.867268] f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000 e659266c f483ba54 [ 7249.867361] 8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0 c16b0e00 00000064 [ 7249.867448] Call Trace: [ 7249.867494] [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e] [ 7249.867534] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867576] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867615] [<c16b0e00>] ? icmp_send+0xa0/0x380 [ 7249.867648] [<c16b102f>] icmp_send+0x2cf/0x380 [ 7249.867681] [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4] [ 7249.867714] [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT] [ 7249.867746] [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables] [ 7249.867780] [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0 [nf_conntrack] [ 7249.867838] [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack] [ 7249.867889] [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter] [ 7249.867933] [<c16776a1>] nf_iterate+0x71/0x80 [ 7249.867970] [<c1677715>] nf_hook_slow+0x65/0xc0 [ 7249.868002] [<c1681811>] __ip_local_out_sk+0xc1/0xd0 [ 7249.868034] [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0 [ 7249.868066] [<c1681836>] ip_local_out_sk+0x16/0x30 [ 7249.868097] [<c1684054>] ip_send_skb+0x14/0x80 [ 7249.868129] [<c16840f4>] ip_push_pending_frames+0x34/0x40 [ 7249.868163] [<c16844a2>] ip_send_unicast_reply+0x282/0x310 [ 7249.868196] [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380 [ 7249.868227] [<c16a1b63>] tcp_v4_rcv+0x323/0x990 [ 7249.868257] [<c16776a1>] ? nf_iterate+0x71/0x80 [ 7249.868289] [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230 [ 7249.868322] [<c167df4c>] ip_local_deliver+0x4c/0xa0 [ 7249.868353] [<c167dba0>] ? ip_rcv_finish+0x390/0x390 [ 7249.868384] [<c167d88c>] ip_rcv_finish+0x7c/0x390 [ 7249.868415] [<c167e280>] ip_rcv+0x2e0/0x420 ... Prior to the VRF change the oif was not set in the flow struct, so the VRF support should really have only added the vrf_master_ifindex lookup. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Cc: Andrey Melnikov <temnota.am@gmail.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add support for VRFs to inetpeer cacheDavid Ahern
inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19vrf: vrf_master_ifindex_rcu is not always called with rcu read lockNikolay Aleksandrov
While running net-next I hit this: [ 634.073119] =============================== [ 634.073150] [ INFO: suspicious RCU usage. ] [ 634.073182] 4.2.0-rc6+ #45 Not tainted [ 634.073213] ------------------------------- [ 634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check() usage! [ 634.073274] other info that might help us debug this: [ 634.073307] rcu_scheduler_active = 1, debug_locks = 1 [ 634.073338] 2 locks held by swapper/0/0: [ 634.073369] #0: (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>] call_timer_fn+0x5/0x480 [ 634.073412] #1: (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>] icmp_send+0x155/0x5f0 [ 634.073450] stack backtrace: [ 634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45 [ 634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 634.073545] 0000000000000000 0593ba8242d9ace4 ffff88002fc03b48 ffffffff81803f1b [ 634.073612] 0000000000000000 ffffffff81e12500 ffff88002fc03b78 ffffffff811003c5 [ 634.073642] 0000000000000000 ffff88002ec4e600 ffffffff81f00f80 ffff88002fc03cf0 [ 634.073669] Call Trace: [ 634.073694] <IRQ> [<ffffffff81803f1b>] dump_stack+0x4c/0x65 [ 634.073728] [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100 [ 634.073763] [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0 [ 634.073793] [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0 [ 634.073818] [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0 [ 634.073844] [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0 [ 634.073873] [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0 [ 634.073899] [<ffffffff8174bdda>] arp_error_report+0x3a/0x80 [ 634.073926] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.073952] [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110 [ 634.073984] [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480 [ 634.074013] [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430 [ 634.074013] [<ffffffff810af50e>] __do_softirq+0xde/0x630 [ 634.074013] [<ffffffff810afc97>] irq_exit+0x117/0x120 [ 634.074013] [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60 [ 634.074013] [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80 [ 634.074013] <EOI> [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10 [ 634.074013] [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10 [ 634.074013] [<ffffffff81027d43>] default_idle+0x23/0x200 [ 634.074013] [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20 [ 634.074013] [<ffffffff810f89ba>] default_idle_call+0x2a/0x40 [ 634.074013] [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0 [ 634.074013] [<ffffffff817f9cad>] rest_init+0x13d/0x150 [ 634.074013] [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9 [ 634.074013] [<ffffffff81f68120>] ? early_idt_handler_array+0x120/0x120 [ 634.074013] [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c [ 634.074013] [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d It would seem vrf_master_ifindex_rcu() can be called without RCU held in other contexts as well so introduce a new helper which acquires rcu and returns the ifindex. Also add curly braces around both the "if" and "else" parts as per the style guide. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Fix up inet_addr_type checksDavid Ahern
Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. inet_addr_type_dev_table keeps the same semantics as inet_addr_type but if the passed in device is enslaved to a VRF then the table for that VRF is used for the lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Use VRF device index for lookups on TXDavid Ahern
As with ingress use the index of VRF master device for route lookups on egress. However, the oif should only be used to direct the lookups to a specific table. Routes in the table are not based on the VRF device but rather interfaces that are part of the VRF so do not consider the oif for lookups within the table. The FLOWI_FLAG_VRFSRC is used to control this latter part. Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21icmp: Don't leak original dst into ip_route_input()Thomas Graf
ip_route_input() unconditionally overwrites the dst. Hide the original dst attached to the skb by calling skb_dst_set(skb, NULL) prior to ip_route_input(). Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03ipv4: coding style: comparison for equality with NULLIan Morris
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31ipv4: icmp: use percpu allocationEric Dumazet
Get rid of nr_cpu_ids and use modern percpu allocation. Note that the sockets themselves are not yet allocated using NUMA affinity. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18icmp: Remove some spurious dropped packet profile hits from the ICMP pathRick Jones
If icmp_rcv() has successfully processed the incoming ICMP datagram, we should use consume_skb() rather than kfree_skb() because a hit on the likes of perf -e skb:kfree_skb is not called-for. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net: Convert LIMIT_NETDEBUG to net_dbg_ratelimitedJoe Perches
Use the more common dynamic_debug capable net_dbg_ratelimited and remove the LIMIT_NETDEBUG macro. All messages are still ratelimited. Some KERN_<LEVEL> uses are changed to KERN_DEBUG. This may have some negative impact on messages that were emitted at KERN_INFO that are not not enabled at all unless DEBUG is defined or dynamic_debug is enabled. Even so, these messages are now _not_ emitted by default. This also eliminates the use of the net_msg_warn sysctl "/proc/sys/net/core/warnings". For backward compatibility, the sysctl is not removed, but it has no function. The extern declaration of net_msg_warn is removed from sock.h and made static in net/core/sysctl_net_core.c Miscellanea: o Update the sysctl documentation o Remove the embedded uses of pr_fmt o Coalesce format fragments o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23icmp: add a global rate limitationEric Dumazet
Current ICMP rate limiting uses inetpeer cache, which is an RBL tree protected by a lock, meaning that hosts can be stuck hard if all cpus want to check ICMP limits. When say a DNS or NTP server process is restarted, inetpeer tree grows quick and machine comes to its knees. iptables can not help because the bottleneck happens before ICMP messages are even cooked and sent. This patch adds a new global limitation, using a token bucket filter, controlled by two new sysctl : icmp_msgs_per_sec - INTEGER Limit maximal number of ICMP packets sent per second from this host. Only messages whose type matches icmp_ratemask are controlled by this limit. Default: 1000 icmp_msgs_burst - INTEGER icmp_msgs_per_sec controls number of ICMP packets sent per second, while icmp_msgs_burst controls the burst size of these packets. Default: 50 Note that if we really want to send millions of ICMP messages per second, we might extend idea and infra added in commit 04ca6973f7c1a ("ip: make IP identifiers less predictable") : add a token bucket in the ip_idents hash and no longer rely on inetpeer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02ipv4: remove nested rcu_read_lock/unlockDuan Jiong
ip_local_deliver_finish() already have a rcu_read_lock/unlock, so the rcu_read_lock/unlock is unnecessary. See the stack below: ip_local_deliver_finish | | ->icmp_rcv | | ->icmp_socket_deliver Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31net: fix the counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORSDuan Jiong
When dealing with ICMPv[46] Error Message, function icmp_socket_deliver() and icmpv6_notify() do some valid checks on packet's length, but then some protocols check packet's length redaudantly. So remove those duplicated statements, and increase counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORS in function icmp_socket_deliver() and icmpv6_notify() respectively. In addition, add missed counter in udp6/udplite6 when socket is NULL. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07ipv4: icmp: Fix pMTU handling for rare caseEdward Allcutt
Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by: Edward Allcutt <edward.allcutt@openmarket.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: add a sysctl to reflect the fwmark on repliesLorenzo Colitti
Kernel-originated IP packets that have no user socket associated with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.) are emitted with a mark of zero. Add a sysctl to make them have the same mark as the packet they are replying to. This allows an administrator that wishes to do so to use mark-based routing, firewalling, etc. for these replies by marking the original packets inbound. Tested using user-mode linux: - ICMP/ICMPv6 echo replies and errors. - TCP RST packets (IPv4 and IPv6). Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08icmp: Call skb_checksum_simple_validateTom Herbert
Use skb_checksum_simple_validate to verify checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13ipv4: introduce hardened ip_no_pmtu_disc modeHannes Frederic Sowa
This new ip_no_pmtu_disc mode only allowes fragmentation-needed errors to be honored by protocols which do more stringent validation on the ICMP's packet payload. This knob is useful for people who e.g. want to run an unmodified DNS server in a namespace where they need to use pmtu for TCP connections (as they are used for zone transfers or fallback for requests) but don't want to use possibly spoofed UDP pmtu information. Currently the whitelisted protocols are TCP, SCTP and DCCP as they check if the returned packet is in the window or if the association is valid. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: John Heffner <johnwheffner@gmail.com> Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18ipv4: new ip_no_pmtu_disc mode to always discard incoming frag needed msgsHannes Frederic Sowa
This new mode discards all incoming fragmentation-needed notifications as I guess was originally intended with this knob. To not break backward compatibility too much, I only added a special case for mode 2 in the receiving path. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18inet: make no_pmtu_disc per namespace and kill ipv4_configHannes Frederic Sowa
The other field in ipv4_config, log_martians, was converted to a per-interface setting, so we can just remove the whole structure. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28ipv4: processing ancillary IP_TOS or IP_TTLFrancesco Fusco
If IP_TOS or IP_TTL are specified as ancillary data, then sendmsg() sends out packets with the specified TTL or TOS overriding the socket values specified with the traditional setsockopt(). The struct inet_cork stores the values of TOS, TTL and priority that are passed through the struct ipcm_cookie. If there are user-specified TOS (tos != -1) or TTL (ttl != 0) in the struct ipcm_cookie, these values are used to override the per-socket values. In case of TOS also the priority is changed accordingly. Two helper functions get_rttos and get_rtconn_flags are defined to take into account the presence of a user specified TOS value when computing RT_TOS and RT_CONN_FLAGS. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03icmp: avoid allocating large struct on stackCong Wang
struct icmp_bxm is a large struct, reduce stack usage by allocating it on heap. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03] icmp: fix icmp_unreach() comment.Rami Rosen
ICMP_PARAMETERPROB is handled by icmp_unreach(); This patch adds ICMP_PARAMETERPROB to the list of ICMP message types handled by icmp_unreach(). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28ipv4: Correct comparisons and calculations using skb->tail and ↵Simon Horman
skb-transport_header This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25net: ipv6: Add IPv6 support to the ping socket.Lorenzo Colitti
This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29net: Add MIB counters for checksum errorsEric Dumazet
Add MIB counters for checksum errors in IP layer, and TCP/UDP/ICMP layers, to help diagnose problems. $ nstat -a | grep Csum IcmpInCsumErrors 72 0.0 TcpInCsumErrors 382 0.0 UdpInCsumErrors 463221 0.0 Icmp6InCsumErrors 75 0.0 Udp6InCsumErrors 173442 0.0 IpExtInCsumErrors 10884 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-22ipv4: fix error handling in icmp_protocol.Li Wei
Now we handle icmp errors in each transport protocol's err_handler, for icmp protocols, that is ping_err. Since this handler only care of those icmp errors triggered by echo request, errors triggered by echo reply(which sent by kernel) are sliently ignored. So wrap ping_err() with icmp_err() to deal with those icmp errors. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow()Neal Cardwell
inet_getpeer_v4() can return NULL under OOM conditions, and while inet_peer_xrlim_allow() is OK with a NULL peer, inet_putpeer() will crash. This code path now uses the same idiom as the others from: 1d861aa4b3fb08822055345f480850205ffe6170 ("inet: Minimize use of cached route inetpeer."). Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23ipv4: Prepare for change of rt->rt_iif encoding.David S. Miller
Use inet_iif() consistently, and for TCP record the input interface of cached RX dst in inet sock. rt->rt_iif is going to be encoded differently, so that we can legitimately cache input routes in the FIB info more aggressively. When the input interface is "use SKB device index" the rt->rt_iif will be set to zero. This forces us to move the TCP RX dst cache installation into the ipv4 specific code, and as well it should since doing the route caching for ipv6 is pointless at the moment since it is not inspected in the ipv6 input paths yet. Also, remove the unlikely on dst->obsolete, all ipv4 dsts have obsolete set to a non-zero value to force invocation of the check callback. Signed-off-by: David S. Miller <davem@davemloft.net>