summaryrefslogtreecommitdiff
path: root/net/ipv4/udp_tunnel.c
AgeCommit message (Collapse)Author
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17net/ipv4/udp_tunnel: prefer SO_BINDTOIFINDEX over SO_BINDTODEVICEDavid Herrmann
The udp-tunnel setup allows binding sockets to a network device. Prefer the new SO_BINDTOIFINDEX to avoid temporarily resolving the device-name just to look it up in the ioctl again. Reviewed-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03udp_tunnel: add config option to bind to a deviceAlexis Bauvin
UDP tunnel sockets are always opened unbound to a specific device. This patch allow the socket to be bound on a custom device, which incidentally makes UDP tunnels VRF-aware if binding to an l3mdev. Signed-off-by: Alexis Bauvin <abauvin@scaleway.com> Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com> Tested-by: Amine Kherbouche <akherbouche@scaleway.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08udp: Handle ICMP errors for tunnels with same destination port on both endpointsStefano Brivio
For both IPv4 and IPv6, if we can't match errors to a socket, try tunnels before ignoring them. Look up a socket with the original source and destination ports as found in the UDP packet inside the ICMP payload, this will work for tunnels that force the same destination port for both endpoints, i.e. VXLAN and GENEVE. Actually, lwtunnels could break this assumption if they are configured by an external control plane to have different destination ports on the endpoints: in this case, we won't be able to trace ICMP messages back to them. For IPv6 redirect messages, call ip6_redirect() directly with the output interface argument set to the interface we received the packet from (as it's the very interface we should build the exception on), otherwise the new nexthop will be rejected. There's no such need for IPv4. Tunnels can now export an encap_err_lookup() operation that indicates a match. Pass the packet to the lookup function, and if the tunnel driver reports a matching association, continue with regular ICMP error handling. v2: - Added newline between network and transport header sets in __udp{4,6}_lib_err_encap() (David Miller) - Removed redundant skb_reset_network_header(skb); in __udp4_lib_err_encap() - Removed redundant reassignment of iph in __udp4_lib_err_encap() (Sabrina Dubroca) - Edited comment to __udp{4,6}_lib_err_encap() to reflect the fact this won't work with lwtunnels configured to use asymmetric ports. By the way, it's VXLAN, not VxLAN (Jiri Benc) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: add infrastructure to un-offload UDP tunnel portSabrina Dubroca
This adds a new NETDEV_UDP_TUNNEL_DROP_INFO event, similar to NETDEV_UDP_TUNNEL_PUSH_INFO, to signal to un-offload ports. This also adds udp_tunnel_drop_rx_port(), which calls ndo_udp_tunnel_del. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: check UDP tunnel RX port offload feature before calling tunnel ndo ndoSabrina Dubroca
If NETIF_F_RX_UDP_TUNNEL_PORT was disabled on a given netdevice, skip the tunnel offload ndo call during tunnel port creation and deletion. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: Remove deprecated tunnel specific UDP offload functionsAlexander Duyck
Now that we have all the drivers using udp_tunnel_get_rx_ports, ndo_add_udp_enc_rx_port, and ndo_del_udp_enc_rx_port we can drop the function calls that were specific to VXLAN and GENEVE. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: Merge VXLAN and GENEVE push notifiers into a single notifierAlexander Duyck
This patch merges the notifiers for VXLAN and GENEVE into a single UDP tunnel notifier. The idea is that we will want to only have to make one notifier call to receive the list of ports for VXLAN and GENEVE tunnels that need to be offloaded. In addition we add a new set of ndo functions named ndo_udp_tunnel_add and ndo_udp_tunnel_del that are meant to allow us to track the tunnel meta-data such as port and address family as tunnels are added and removed. The tunnel meta-data is now transported in a structure named udp_tunnel_info which for now carries the type, address family, and port number. In the future this could be updated so that we can include a tuple of values including things such as the destination IP address and other fields. I also ended up going with a naming scheme that consisted of using the prefix udp_tunnel on function names. I applied this to the notifier and ndo ops as well so that it hopefully points to the fact that these are primarily used in the udp_tunnel functions. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: Combine GENEVE and VXLAN port notifiers into single functionsAlexander Duyck
This patch merges the GENEVE and VXLAN code so that both functions pass through a shared code path. This way we can start the effort of using a single function on the network device drivers to handle both of these tunnel types. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07udp: Add socket based GRO and configTom Herbert
Add gro_receive and gro_complete to struct udp_tunnel_sock_cfg. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23tunnel: Clear IPCB(skb)->opt before dst_link_failure calledBernie Harris
IPCB may contain data from previous layers (in the observed case the qdisc layer). In the observed scenario, the data was misinterpreted as ip header options, which later caused the ihl to be set to an invalid value (<5). This resulted in an infinite loop in the mips implementation of ip_fast_csum. This patch clears IPCB(skb)->opt before dst_link_failure can be called for various types of tunnels. This change only applies to encapsulated ipv4 packets. The code introduced in 11c21a30 which clears all of IPCB has been removed to be consistent with these changes, and instead the opt field is cleared unconditionally in ip_tunnel_xmit. The change in ip_tunnel_xmit applies to SIT, GRE, and IPIP tunnels. The relevant vti, l2tp, and pptp functions already contain similar code for clearing the IPCB. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-25ip_tunnel: Move stats update to iptunnel_xmit()Pravin B Shelar
By moving stats update into iptunnel_xmit(), we can simplify iptunnel_xmit() usage. With this change there is no need to call another function (iptunnel_xmit_stats()) to update stats in tunnel xmit code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27tunnel: introduce udp_tun_rx_dst()Pravin B Shelar
Introduce function udp_tun_rx_dst() to initialize tunnel dst on receive path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: Modify sk_alloc to not reference count the netns of kernel sockets.Eric W. Biederman
Now that sk_alloc knows when a kernel socket is being allocated modify it to not reference count the network namespace of kernel sockets. Keep track of if a socket needs reference counting by adding a flag to struct sock called sk_net_refcnt. Update all of the callers of sock_create_kern to stop using sk_change_net and sk_release_kernel as those hacks are no longer needed, to avoid reference counting a kernel socket. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: Add a struct net parameter to sock_create_kernEric W. Biederman
This is long overdue, and is part of cleaning up how we allocate kernel sockets that don't reference count struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb().David Miller
That was we can make sure the output path of ipv4/ipv6 operate on the UDP socket rather than whatever random thing happens to be in skb->sk. Based upon a patch by Jiri Pirko. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
2015-01-24udp: Do not require sock in udp_tunnel_xmit_skbTom Herbert
The UDP tunnel transmit functions udp_tunnel_xmit_skb and udp_tunnel6_xmit_skb include a socket argument. The socket being passed to the functions (from VXLAN) is a UDP created for receive side. The only thing that the socket is used for in the transmit functions is to get the setting for checksum (enabled or zero). This patch removes the argument and and adds a nocheck argument for checksum setting. This eliminates the unnecessary dependency on a UDP socket for UDP tunnel transmit. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05ip: Move checksum convert defines to inetTom Herbert
Move convert_csum from udp_sock to inet_sock. This allows the possibility that we can use convert checksum for different types of sockets and also allows convert checksum to be enabled from inet layer (what we'll want to do when enabling IP_CHECKSUM cmsg). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19udp-tunnel: Add a few more UDP tunnel APIsAndy Zhou
Added a few more UDP tunnel APIs that can be shared by UDP based tunnel protocol implementation. The main ones are highlighted below. setup_udp_tunnel_sock() configures UDP listener socket for receiving UDP encapsulated packets. udp_tunnel_xmit_skb() and upd_tunnel6_xmit_skb() transmit skb using UDP encapsulation. udp_tunnel_sock_release() closes the UDP tunnel listener socket. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19udp_tunnel: Seperate ipv6 functions into its own file.Andy Zhou
Add ip6_udp_tunnel.c for ipv6 UDP tunnel functions to avoid ifdefs in udp_tunnel.c Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14udp: Add udp_sock_create for UDP tunnels to open listener socketTom Herbert
Added udp_tunnel.c which can contain some common functions for UDP tunnels. The first function in this is udp_sock_create which is used to open the listener port for a UDP tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>