summaryrefslogtreecommitdiff
path: root/net/ipv4
AgeCommit message (Collapse)Author
2018-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
2018-06-14tcp: verify the checksum of the first data segment in a new connectionFrank van der Linden
commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11tcp: Do not reload skb pointer after skb_gro_receive().David Miller
This is not necessary. skb_gro_receive() will never change what 'head' points to. In it's original implementation (see commit 71d93b39e52e ("net: Add skb_gro_receive")), it did: ==================== + *head = nskb; + nskb->next = p->next; + p->next = NULL; ==================== This sequence was removed in commit 58025e46ea2d ("net: gro: remove obsolete code from skb_gro_receive()") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <edumazet@google.com>
2018-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Reject non-null terminated helper names from xt_CT, from Gao Feng. 2) Fix KASAN splat due to out-of-bound access from commit phase, from Alexey Kodanev. 3) Missing conntrack hook registration on IPVS FTP helper, from Julian Anastasov. 4) Incorrect skbuff allocation size in bridge nft_reject, from Taehee Yoo. 5) Fix inverted check on packet xmit to non-local addresses, also from Julian. 6) Fix ebtables alignment compat problems, from Alin Nastac. 7) Hook mask checks are not correct in xt_set, from Serhey Popovych. 8) Fix timeout listing of element in ipsets, from Jozsef. 9) Cap maximum timeout value in ipset, also from Jozsef. 10) Don't allow family option for hash:mac sets, from Florent Fourcot. 11) Restrict ebtables to work with NFPROTO_BRIDGE targets only, this Florian. 12) Another bug reported by KASAN in the rbtree set backend, from Taehee Yoo. 13) Missing __IPS_MAX_BIT update doesn't include IPS_OFFLOAD_BIT. From Gao Feng. 14) Missing initialization of match/target in ebtables, from Florian Westphal. 15) Remove useless nft_dup.h file in include path, from C. Labbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-10tcp: limit sk_rcvlowat by the maximum receive bufferSoheil Hassas Yeganeh
The user-provided value to setsockopt(SO_RCVLOWAT) can be larger than the maximum possible receive buffer. Such values mute POLLIN signals on the socket which can stall progress on the socket. Limit the user-provided value to half of the maximum receive buffer, i.e., half of sk_rcvbuf when the receive buffer size is set by the user, or otherwise half of sysctl_tcp_rmem[2]. Fixes: d1361840f8c5 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-08udp: fix rx queue len reported by diag and proc interfacePaolo Abeni
After commit 6b229cf77d68 ("udp: add batching to udp_rmem_release()") the sk_rmem_alloc field does not measure exactly anymore the receive queue length, because we batch the rmem release. The issue is really apparent only after commit 0d4a6608f68c ("udp: do rmem bulk free even if the rx sk queue is empty"): the user space can easily check for an empty socket with not-0 queue length reported by the 'ss' tool or the procfs interface. We need to use a custom UDP helper to report the correct queue length, taking into account the forward allocation deficit. Reported-by: trevor.francis@46labs.com Fixes: 6b229cf77d68 ("UDP: add batching to udp_rmem_release()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-08netfilter: x_tables: initialise match/target check parameter structFlorian Westphal
syzbot reports following splat: BUG: KMSAN: uninit-value in ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 xt_check_match+0x1438/0x1650 net/netfilter/x_tables.c:506 ebt_check_match net/bridge/netfilter/ebtables.c:372 [inline] ebt_check_entry net/bridge/netfilter/ebtables.c:702 [inline] The uninitialised access is xt_mtchk_param->nft_compat ... which should be set to 0. Fix it by zeroing the struct beforehand, same for tgchk. ip(6)tables targetinfo uses c99-style initialiser, so no change needed there. Reported-by: syzbot+da4494182233c23a5fcf@syzkaller.appspotmail.com Fixes: 55917a21d0cc0 ("netfilter: x_tables: add context to know if extension runs from nft_compat") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-07ip_tunnel: Fix name string concatenate in __ip_tunnel_create()Sultan Alsawaf
By passing a limit of 2 bytes to strncat, strncat is limited to writing fewer bytes than what it's supposed to append to the name here. Since the bounds are checked on the line above this, just remove the string bounds checks entirely since they're unneeded. Signed-off-by: Sultan Alsawaf <sultanxda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-06-05 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add a new BPF hook for sendmsg similar to existing hooks for bind and connect: "This allows to override source IP (including the case when it's set via cmsg(3)) and destination IP:port for unconnected UDP (slow path). TCP and connected UDP (fast path) are not affected. This makes UDP support complete, that is, connected UDP is handled by connect hooks, unconnected by sendmsg ones.", from Andrey. 2) Rework of the AF_XDP API to allow extending it in future for type writer model if necessary. In this mode a memory window is passed to hardware and multiple frames might be filled into that window instead of just one that is the case in the current fixed frame-size model. With the new changes made this can be supported without having to add a new descriptor format. Also, core bits for the zero-copy support for AF_XDP have been merged as agreed upon, where i40e bits will be routed via Jeff later on. Various improvements to documentation and sample programs included as well, all from Björn and Magnus. 3) Given BPF's flexibility, a new program type has been added to implement infrared decoders. Quote: "The kernel IR decoders support the most widely used IR protocols, but there are many protocols which are not supported. [...] There is a 'long tail' of unsupported IR protocols, for which lircd is need to decode the IR. IR encoding is done in such a way that some simple circuit can decode it; therefore, BPF is ideal. [...] user-space can define a decoder in BPF, attach it to the rc device through the lirc chardev.", from Sean. 4) Several improvements and fixes to BPF core, among others, dumping map and prog IDs into fdinfo which is a straight forward way to correlate BPF objects used by applications, removing an indirect call and therefore retpoline in all map lookup/update/delete calls by invoking the callback directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper for tc BPF programs to have an efficient way of looking up cgroup v2 id for policy or other use cases. Fixes to make sure we zero tunnel/xfrm state that hasn't been filled, to allow context access wrt pt_regs in 32 bit archs for tracing, and last but not least various test cases for fixes that landed in bpf earlier, from Daniel. 5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper. 6) Add a new bpf_get_current_cgroup_id() helper that can be used in tracing to retrieve the cgroup id from the current process in order to allow for e.g. aggregation of container-level events, from Yonghong. 7) Two follow-up fixes for BTF to reject invalid input values and related to that also two test cases for BPF kselftests, from Martin. 8) Various API improvements to the bpf_fib_lookup() helper, that is, dropping MPLS bits which are not fully hashed out yet, rejecting invalid helper flags, returning error for unsupported address families as well as renaming flowlabel to flowinfo, from David. 9) Various fixes and improvements to sockmap BPF kselftests in particular in proper error detection and data verification, from Prashant. 10) Two arm32 BPF JIT improvements. One is to fix imm range check with regards to whether immediate fits into 24 bits, and a naming cleanup to get functions related to rsh handling consistent to those handling lsh, from Wang. 11) Two compile warning fixes in BPF, one for BTF and a false positive to silent gcc in stack_map_get_build_id_offset(), from Arnd. 12) Add missing seg6.h header into tools include infrastructure in order to fix compilation of BPF kselftests, from Mathieu. 13) Several formatting cleanups in the BPF UAPI helper description that also fix an error during rst2man compilation, from Quentin. 14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is not built into the kernel, from Yue. 15) Remove a useless double assignment in dev_map_enqueue(), from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05net: metrics: add proper netlink validationEric Dumazet
Before using nla_get_u32(), better make sure the attribute is of the proper size. Code recently was changed, but bug has been there from beginning of git. BUG: KMSAN: uninit-value in rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746 CPU: 1 PID: 14139 Comm: syz-executor6 Not tainted 4.17.0-rc5+ #103 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084 __msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686 rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746 fib_dump_info+0xc42/0x2190 net/ipv4/fib_semantics.c:1361 rtmsg_fib+0x65f/0x8c0 net/ipv4/fib_semantics.c:419 fib_table_insert+0x2314/0x2b50 net/ipv4/fib_trie.c:1287 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x455a09 RSP: 002b:00007faae5fd8c68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007faae5fd96d4 RCX: 0000000000455a09 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000005d0 R14: 00000000006fdc20 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_save_stack mm/kmsan/kmsan.c:294 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:529 fib_convert_metrics net/ipv4/fib_semantics.c:1056 [inline] fib_create_info+0x2d46/0x9dc0 net/ipv4/fib_semantics.c:1150 fib_table_insert+0x3e4/0x2b50 net/ipv4/fib_trie.c:1146 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2753 [inline] __kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:988 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a919525ad832 ("net: Move fib_convert_metrics to metrics file") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05ipmr: fix error path when ipmr_new_table failsSabrina Dubroca
commit 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") refactored ipmr_new_table, so that it now returns NULL when mr_table_alloc fails. Unfortunately, all callers of ipmr_new_table expect an ERR_PTR. This can result in NULL deref, for example when ipmr_rules_exit calls ipmr_free_table with NULL net->ipv4.mrt in the !CONFIG_IP_MROUTE_MULTIPLE_TABLES version. This patch makes mr_table_alloc return errors, and changes ip6mr_new_table and its callers to return/expect error pointers as well. It also removes the version of mr_table_alloc defined under !CONFIG_IP_MROUTE_COMMON, since it is never used. Fixes: 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05netfilter: provide udp*_lib_lookup for nf_tproxyArnd Bergmann
It is now possible to enable the libified nf_tproxy modules without also enabling NETFILTER_XT_TARGET_TPROXY, which throws off the ifdef logic in the udp core code: net/ipv6/netfilter/nf_tproxy_ipv6.o: In function `nf_tproxy_get_sock_v6': nf_tproxy_ipv6.c:(.text+0x1a8): undefined reference to `udp6_lib_lookup' net/ipv4/netfilter/nf_tproxy_ipv4.o: In function `nf_tproxy_get_sock_v4': nf_tproxy_ipv4.c:(.text+0x3d0): undefined reference to `udp4_lib_lookup' We can actually simplify the conditions now to provide the two functions exactly when they are needed. Fixes: 45ca4e0cf273 ("netfilter: Libify xt_TPROXY") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05net-tcp: remove useless tw_timeout fieldMaciej Żenczykowski
Tested: 'git grep tw_timeout' comes up empty and it builds :-) Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05tcp: refactor tcp_ecn_check_ce to remove sk type castYousuk Seung
Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock* instead of tcp_sock* to clean up type casts. This is a pure refactor patch. Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net-tcp: extend tcp_tw_reuse sysctl to enable loopback only optimizationMaciej Żenczykowski
This changes the /proc/sys/net/ipv4/tcp_tw_reuse from a boolean to an integer. It now takes the values 0, 1 and 2, where 0 and 1 behave as before, while 2 enables timewait socket reuse only for sockets that we can prove are loopback connections: ie. bound to 'lo' interface or where one of source or destination IPs is 127.0.0.0/8, ::ffff:127.0.0.0/104 or ::1. This enables quicker reuse of ephemeral ports for loopback connections - where tcp_tw_reuse is 100% safe from a protocol perspective (this assumes no artificially induced packet loss on 'lo'). This also makes estblishing many loopback connections *much* faster (allocating ports out of the first half of the ephemeral port range is significantly faster, then allocating from the second half) Without this change in a 32K ephemeral port space my sample program (it just establishes and closes [::1]:ephemeral -> [::1]:server_port connections in a tight loop) fails after 32765 connections in 24 seconds. With it enabled 50000 connections only take 4.7 seconds. This is particularly problematic for IPv6 where we only have one local address and cannot play tricks with varying source IP from 127.0.0.0/8 pool. Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Wei Wang <weiwan@google.com> Change-Id: I0377961749979d0301b7b62871a32a4b34b654e1 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04Merge branch 'work.aio-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03netfilter: Libify xt_TPROXYMáté Eckl
The extracted functions will likely be usefull to implement tproxy support in nf_tables. Extrancted functions: - nf_tproxy_sk_is_transparent - nf_tproxy_laddr4 - nf_tproxy_handle_time_wait4 - nf_tproxy_get_sock_v4 - nf_tproxy_laddr6 - nf_tproxy_handle_time_wait6 - nf_tproxy_get_sock_v6 (nf_)tproxy_handle_time_wait6 also needed some refactor as its current implementation was xtables-specific. Signed-off-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree, the most relevant things in this batch are: 1) Compile masquerade infrastructure into NAT module, from Florian Westphal. Same thing with the redirection support. 2) Abort transaction if early initialization of the commit phase fails. Also from Florian. 3) Get rid of synchronize_rcu() by using rule array in nf_tables, from Florian. 4) Abort nf_tables batch if fatal signal is pending, from Florian. 5) Use .call_rcu nfnetlink from nf_tables to make dumps fully lockless. From Florian Westphal. 6) Support to match transparent sockets from nf_tables, from Máté Eckl. 7) Audit support for nf_tables, from Phil Sutter. 8) Validate chain dependencies from commit phase, fall back to fine grain validation only in case of errors. 9) Attach dst to skbuff from netfilter flowtable packet path, from Jason A. Donenfeld. 10) Use artificial maximum attribute cap to remove VLA from nfnetlink. Patch from Kees Cook. 11) Add extension to allow to forward packets through neighbour layer. 12) Add IPv6 conntrack helper support to IPVS, from Julian Anastasov. 13) Add IPv6 FTP conntrack support to IPVS, from Julian Anastasov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01ip_tunnel: restore binding to ifaces with a large mtuNicolas Dichtel
After commit f6cc9c054e77, the following conf is broken (note that the default loopback mtu is 65536, ie IP_MAX_MTU + 1): $ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev lo add tunnel "gre0" failed: Invalid argument $ ip l a type dummy $ ip l s dummy1 up $ ip l s dummy1 mtu 65535 $ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev dummy1 add tunnel "gre0" failed: Invalid argument dev_set_mtu() doesn't allow to set a mtu which is too large. First, let's cap the mtu returned by ip_tunnel_bind_dev(). Second, remove the magic value 0xFFF8 and use IP_MAX_MTU instead. 0xFFF8 seems to be there for ages, I don't know why this value was used. With a recent kernel, it's also possible to set a mtu > IP_MAX_MTU: $ ip l s dummy1 mtu 66000 After that patch, it's also possible to bind an ip tunnel on that kind of interface. CC: Petr Machata <petrm@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a Fixes: f6cc9c054e77 ("ip_tunnel: Emit events for post-register MTU changes") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31tcp: minor optimization around tcp_hdr() usage in receive pathYafang Shao
This is additional to the commit ea1627c20c34 ("tcp: minor optimizations around tcp_hdr() usage"). At this point, skb->data is same with tcp_hdr() as tcp header has not been pulled yet. So use the less expensive one to get the tcp header. Remove the third parameter of tcp_rcv_established() and put it into the function body. Furthermore, the local variables are listed as a reverse christmas tree :) Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv4: Add support for specifying metric of connected routesDavid Ahern
Add support for IFA_RT_PRIORITY to ipv4 addresses. If the metric is changed on an existing address then the new route is inserted before removing the old one. Since the metric is one of the route keys, the prefix route can not be replaced. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: bpfilter: make function bpfilter_mbox_request() staticWei Yongjun
Fixes the following sparse warnings: net/ipv4/bpfilter/sockopt.c:13:5: warning: symbol 'bpfilter_mbox_request' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29netfilter: nat: merge ipv4/ipv6 masquerade code into main nat moduleFlorian Westphal
Instead of using extra modules for these, turn the config options into an implicit dependency that adds masq feature to the protocol specific nf_nat module. before: text data bss dec hex filename 2001 860 4 2865 b31 net/ipv4/netfilter/nf_nat_masquerade_ipv4.ko 5579 780 2 6361 18d9 net/ipv4/netfilter/nf_nat_ipv4.ko 2860 836 8 3704 e78 net/ipv6/netfilter/nf_nat_masquerade_ipv6.ko 6648 780 2 7430 1d06 net/ipv6/netfilter/nf_nat_ipv6.ko after: text data bss dec hex filename 7245 872 8 8125 1fbd net/ipv4/netfilter/nf_nat_ipv4.ko 9165 848 12 10025 2729 net/ipv6/netfilter/nf_nat_ipv6.ko Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-28bpf: Hooks for sys_sendmsgAndrey Ignatov
In addition to already existing BPF hooks for sys_bind and sys_connect, the patch provides new hooks for sys_sendmsg. It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that provides access to socket itlself (properties like family, type, protocol) and user-passed `struct sockaddr *` so that BPF program can override destination IP and port for system calls such as sendto(2) or sendmsg(2) and/or assign source IP to the socket. The hooks are implemented as two new attach types: `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and UDPv6 correspondingly. UDPv4 and UDPv6 separate attach types for same reason as sys_bind and sys_connect hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. The difference with already existing hooks is sys_sendmsg are implemented only for unconnected UDP. For TCP it doesn't make sense to change user-provided `struct sockaddr *` at sendto(2)/sendmsg(2) time since socket either was already connected and has source/destination set or wasn't connected and call to sendto(2)/sendmsg(2) would lead to ENOTCONN anyway. Connected UDP is already handled by sys_connect hooks that can override source/destination at connect time and use fast-path later, i.e. these hooks don't affect UDP fast-path. Rewriting source IP is implemented differently than that in sys_connect hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to just bind socket to desired local IP address since source IP can be set on per-packet basis by using ancillary data (cmsg(3)). So no matter if socket is bound or not, source IP has to be rewritten on every call to sys_sendmsg. To do so two new fields are added to UAPI `struct bpf_sock_addr`; * `msg_src_ip4` to set source IPv4 for UDPv4; * `msg_src_ip6` to set source IPv6 for UDPv6. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-26net: convert datagram_poll users tp ->poll_maskChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26net/tcp: convert to ->poll_maskChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-24net/ipv4: Remove tracepoint in fib_validate_sourceDavid Ahern
Tracepoint does not add value and the call to fib_lookup follows it which shows the same information and the fib lookup result. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24net/ipv4: Udate fib_table_lookup tracepointDavid Ahern
Commit 4a2d73a4fb36 ("ipv4: fib_rules: support match on sport, dport and ip proto") added support for protocol and ports to FIB rules. Update the FIB lookup tracepoint to dump the parameters. In addition, make the IPv4 tracepoint similar to the IPv6 one where the lookup parameters and result are dumped in 1 event. It is much easier to use and understand the outcome of the lookup. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-05-24 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc). 2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers. 3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit. 4) Jiong Wang adds support for indirect and arithmetic shifts to NFP 5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible. 6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions. 7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT. 8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events. 9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ipv4: remove warning in ip_recv_errorWillem de Bruijn
A precondition check in ip_recv_error triggered on an otherwise benign race. Remove the warning. The warning triggers when passing an ipv6 socket to this ipv4 error handling function. RaceFuzzer was able to trigger it due to a race in setsockopt IPV6_ADDRFORM. --- CPU0 do_ipv6_setsockopt sk->sk_socket->ops = &inet_dgram_ops; --- CPU1 sk->sk_prot->recvmsg udp_recvmsg ip_recv_error WARN_ON_ONCE(sk->sk_family == AF_INET6); --- CPU0 do_ipv6_setsockopt sk->sk_family = PF_INET; This socket option converts a v6 socket that is connected to a v4 peer to an v4 socket. It updates the socket on the fly, changing fields in sk as well as other structs. This is inherently non-atomic. It races with the lockless udp_recvmsg path. No other code makes an assumption that these fields are updated atomically. It is benign here, too, as ip_recv_error cares only about the protocol of the skbs enqueued on the error queue, for which sk_family is not a precise predictor (thanks to another isue with IPV6_ADDRFORM). Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr Fixes: 7ce875e5ecb8 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error") Reported-by: DaeRyong Jeong <threeearcat@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Remove obsolete nf_log tracing from nf_tables, from Florian Westphal. 2) Add support for map lookups to numgen, random and hash expressions, from Laura Garcia. 3) Allow to register nat hooks for iptables and nftables at the same time. Patchset from Florian Westpha. 4) Timeout support for rbtree sets. 5) ip6_rpfilter works needs interface for link-local addresses, from Vincent Bernat. 6) Add nf_ct_hook and nf_nat_hook structures and use them. 7) Do not drop packets on packets raceing to insert conntrack entries into hashes, this is particularly a problem in nfqueue setups. 8) Address fallout from xt_osf separation to nf_osf, patches from Florian Westphal and Fernando Mancera. 9) Remove reference to struct nft_af_info, which doesn't exist anymore. From Taehee Yoo. This batch comes with is a conflict between 25fd386e0bc0 ("netfilter: core: add missing __rcu annotation") in your tree and 2c205dd3981f ("netfilter: add struct nf_nat_hook and use it") coming in this batch. This conflict can be solved by leaving the __rcu tag on __netfilter_net_init() - added by 25fd386e0bc0 - and remove all code related to nf_nat_decode_session_hook - which is gone after 2c205dd3981f, as described by: diff --cc net/netfilter/core.c index e0ae4aae96f5,206fb2c4c319..168af54db975 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@@ -611,7 -580,13 +611,8 @@@ const struct nf_conntrack_zone nf_ct_zo EXPORT_SYMBOL_GPL(nf_ct_zone_dflt); #endif /* CONFIG_NF_CONNTRACK */ - static void __net_init __netfilter_net_init(struct nf_hook_entries **e, int max) -#ifdef CONFIG_NF_NAT_NEEDED -void (*nf_nat_decode_session_hook)(struct sk_buff *, struct flowi *); -EXPORT_SYMBOL(nf_nat_decode_session_hook); -#endif - + static void __net_init + __netfilter_net_init(struct nf_hook_entries __rcu **e, int max) { int h; I can also merge your net-next tree into nf-next, solve the conflict and resend the pull request if you prefer so. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23ipv4: support sport, dport and ip_proto in RTM_GETROUTERoopa Prabhu
This is a followup to fib rules sport, dport and ipproto match support. Only supports tcp, udp and icmp for ipproto. Used by fib rule self tests. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net: ipv4: add missing RTA_TABLE to rtm_ipv4_policyRoopa Prabhu
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23udp: exclude gso from xfrm pathsWillem de Bruijn
UDP GSO delays final datagram construction to the GSO layer. This conflicts with protocol transformations. Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net: add skeleton of bpfilter kernel moduleAlexei Starovoitov
bpfilter.ko consists of bpfilter_kern.c (normal kernel module code) and user mode helper code that is embedded into bpfilter.ko The steps to build bpfilter.ko are the following: - main.c is compiled by HOSTCC into the bpfilter_umh elf executable file - with quite a bit of objcopy and Makefile magic the bpfilter_umh elf file is converted into bpfilter_umh.o object file with _binary_net_bpfilter_bpfilter_umh_start and _end symbols Example: $ nm ./bld_x64/net/bpfilter/bpfilter_umh.o 0000000000004cf8 T _binary_net_bpfilter_bpfilter_umh_end 0000000000004cf8 A _binary_net_bpfilter_bpfilter_umh_size 0000000000000000 T _binary_net_bpfilter_bpfilter_umh_start - bpfilter_umh.o and bpfilter_kern.o are linked together into bpfilter.ko bpfilter_kern.c is a normal kernel module code that calls the fork_usermode_blob() helper to execute part of its own data as a user mode process. Notice that _binary_net_bpfilter_bpfilter_umh_start - end is placed into .init.rodata section, so it's freed as soon as __init function of bpfilter.ko is finished. As part of __init the bpfilter.ko does first request/reply action via two unix pipe provided by fork_usermode_blob() helper to make sure that umh is healthy. If not it will kill it via pid. Later bpfilter_process_sockopt() will be called from bpfilter hooks in get/setsockopt() to pass iptable commands into umh via bpfilter.ko If admin does 'rmmod bpfilter' the __exit code bpfilter.ko will kill umh as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23netfilter: nf_nat: add nat type hooks to nat coreFlorian Westphal
Currently the packet rewrite and instantiation of nat NULL bindings happens from the protocol specific nat backend. Invocation occurs either via ip(6)table_nat or the nf_tables nat chain type. Invocation looks like this (simplified): NF_HOOK() | `---iptable_nat | `---> nf_nat_l3proto_ipv4 -> nf_nat_packet | new packet? pass skb though iptables nat chain | `---> iptable_nat: ipt_do_table In nft case, this looks the same (nft_chain_nat_ipv4 instead of iptable_nat). This is a problem for two reasons: 1. Can't use iptables nat and nf_tables nat at the same time, as the first user adds a nat binding (nf_nat_l3proto_ipv4 adds a NULL binding if do_table() did not find a matching nat rule so we can detect post-nat tuple collisions). 2. If you use e.g. nft_masq, snat, redir, etc. uses must also register an empty base chain so that the nat core gets called fro NF_HOOK() to do the reverse translation, which is neither obvious nor user friendly. After this change, the base hook gets registered not from iptable_nat or nftables nat hooks, but from the l3 nat core. iptables/nft nat base hooks get registered with the nat core instead: NF_HOOK() | `---> nf_nat_l3proto_ipv4 -> nf_nat_packet | new packet? pass skb through iptables/nftables nat chains | +-> iptables_nat: ipt_do_table +-> nft nat chain x `-> nft nat chain y The nat core deals with null bindings and reverse translation. When no mapping exists, it calls the registered nat lookup hooks until one creates a new mapping. If both iptables and nftables nat hooks exist, the first matching one is used (i.e., higher priority wins). Also, nft users do not need to create empty nat hooks anymore, nat core always registers the base hooks that take care of reverse/reply translation. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nf_tables: allow chain type to override hook registerFlorian Westphal
Will be used in followup patch when nat types no longer use nf_register_net_hook() but will instead register with the nat core. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: xtables: allow table definitions not backed by hook_opsFlorian Westphal
The ip(6)tables nat table is currently receiving skbs from the netfilter core, after a followup patch skbs will be coming from the netfilter nat core instead, so the table is no longer backed by normal hook_ops. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nf_nat: move common nat code to nat coreFlorian Westphal
Copy-pasted, both l3 helpers almost use same code here. Split out the common part into an 'inet' helper. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-22tcp: do not aggressively quick ack after ECN eventsEric Dumazet
ECN signals currently forces TCP to enter quickack mode for up to 16 (TCP_MAX_QUICKACKS) following incoming packets. We believe this is not needed, and only sending one immediate ack for the current packet should be enough. This should reduce the extra load noticed in DCTCP environments, after congestion events. This is part 2 of our effort to reduce pure ACK packets. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22tcp: add max_quickacks param to tcp_incr_quickack and tcp_enter_quickack_modeEric Dumazet
We want to add finer control of the number of ACK packets sent after ECN events. This patch is not changing current behavior, it only enables following change. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22ipmr: properly check rhltable_init() return valueEric Dumazet
commit 8fb472c09b9d ("ipmr: improve hash scalability") added a call to rhltable_init() without checking its return value. This problem was then later copied to IPv6 and factorized in commit 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 31552 Comm: syz-executor7 Not tainted 4.17.0-rc5+ #60 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rht_key_hashfn include/linux/rhashtable.h:277 [inline] RIP: 0010:__rhashtable_lookup include/linux/rhashtable.h:630 [inline] RIP: 0010:rhltable_lookup include/linux/rhashtable.h:716 [inline] RIP: 0010:mr_mfc_find_parent+0x2ad/0xbb0 net/ipv4/ipmr_base.c:63 RSP: 0018:ffff8801826aef70 EFLAGS: 00010203 RAX: 0000000000000001 RBX: 0000000000000001 RCX: ffffc90001ea0000 RDX: 0000000000000079 RSI: ffffffff8661e859 RDI: 000000000000000c RBP: ffff8801826af1c0 R08: ffff8801b2212000 R09: ffffed003b5e46c2 R10: ffffed003b5e46c2 R11: ffff8801daf23613 R12: dffffc0000000000 R13: ffff8801826af198 R14: ffff8801cf8225c0 R15: ffff8801826af658 FS: 00007ff7fa732700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000003ffffff9c CR3: 00000001b0210000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6mr_cache_find_parent net/ipv6/ip6mr.c:981 [inline] ip6mr_mfc_delete+0x1fe/0x6b0 net/ipv6/ip6mr.c:1221 ip6_mroute_setsockopt+0x15c6/0x1d70 net/ipv6/ip6mr.c:1698 do_ipv6_setsockopt.isra.9+0x422/0x4660 net/ipv6/ipv6_sockglue.c:163 ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:922 rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1060 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 8fb472c09b9d ("ipmr: improve hash scalability") Fixes: 0bbbf0e7d0e7 ("ipmr, ip6mr: Unite creation of new mr_table") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Yuval Mintz <yuvalm@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22net/ipv4: Add helper to return path MTU based on fib resultDavid Ahern
Determine path MTU from a FIB lookup result. Logic is a distillation of ip_dst_mtu_maybe_forward. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>