summaryrefslogtreecommitdiff
path: root/net/ipv6/xfrm6_input.c
AgeCommit message (Collapse)Author
2020-05-06xfrm: state: remove extract_input indirection from xfrm_state_afinfoFlorian Westphal
In order to keep CONFIG_IPV6=m working, xfrm6_extract_header needs to be duplicated. It will be removed again in a followup change when the remaining caller is moved to net/xfrm as well. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-28xfrm: add support for UDPv6 encapsulation of ESPSabrina Dubroca
This patch adds support for encapsulation of ESP over UDPv6. The code is very similar to the IPv4 encapsulation implementation, and allows to easily add espintcp on IPv6 as a follow-up. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-19net: use skb_sec_path helper in more placesFlorian Westphal
skb_sec_path gains 'const' qualifier to avoid xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type same reasoning as previous conversions: Won't need to touch these spots anymore when skb->sp is removed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19xfrm: change secpath_set to return secpath struct, not error valueFlorian Westphal
It can only return 0 (success) or -ENOMEM. Change return value to a pointer to secpath struct. This avoids direct access to skb->sp: err = secpath_set(skb); if (!err) .. skb->sp-> ... Becomes: sp = secpath_set(skb) if (!sp) .. sp-> .. This reduces noise in followup patch which is going to remove skb->sp. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04xfrm: reset transport header back to network header after all input ↵Sowmini Varadhan
transforms ahave been applied A policy may have been set up with multiple transforms (e.g., ESP and ipcomp). In this situation, the ingress IPsec processing iterates in xfrm_input() and applies each transform in turn, processing the nexthdr to find any additional xfrm that may apply. This patch resets the transport header back to network header only after the last transformation so that subsequent xfrms can find the correct transport header. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Suggested-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-19xfrm: Reinject transport-mode packets through taskletHerbert Xu
This is an old bugbear of mine: https://www.mail-archive.com/netdev@vger.kernel.org/msg03894.html By crafting special packets, it is possible to cause recursion in our kernel when processing transport-mode packets at levels that are only limited by packet size. The easiest one is with DNAT, but an even worse one is where UDP encapsulation is used in which case you just have to insert an UDP encapsulation header in between each level of recursion. This patch avoids this problem by reinjecting tranport-mode packets through a tasklet. Fixes: b05e106698d9 ("[IPV4/6]: Netfilter IPsec input hooks") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-02xfrm6: Fix CHECKSUM_COMPLETE after IPv6 header pushYossi Kuperman
xfrm6_transport_finish rebuilds the IPv6 header based on the original one and pushes it back without fixing skb->csum. Therefore, CHECKSUM_COMPLETE is no longer valid and the packet gets dropped. Fix skb->csum by calling skb_postpush_rcsum. Note: A valid IPv4 header has checksum 0, unlike IPv6. Thus, the change is not needed in the sibling xfrm4_transport_finish function. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-06-22xfrm6: Fix IPv6 payload_len in xfrm6_transport_finishYossi Kuperman
IPv6 payload length indicates the size of the payload, including any extension headers. In xfrm6_transport_finish, ipv6_hdr(skb)->payload_len is set to the payload size only, regardless of the presence of any extension headers. After ESP GRO transport mode decapsulation, ipv6_rcv trims the packet according to the wrong payload_len, thus corrupting the packet. Set payload_len to account for extension headers as well. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15esp: Add a software GRO codepathSteffen Klassert
This patch adds GRO ifrastructure and callbacks for ESP on ipv4 and ipv6. In case the GRO layer detects an ESP packet, the esp{4,6}_gro_receive() function does a xfrm state lookup and calls the xfrm input layer if it finds a matching state. The packet will be decapsulated and reinjected it into layer 2. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Add a secpath_set helper.Steffen Klassert
Add a new helper to set the secpath to the skb. This avoids code duplication, as this is used in multiple places. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-21vti6: fix input pathNicolas Dichtel
Since commit 1625f4529957, vti6 is broken, all input packets are dropped (LINUX_MIB_XFRMINNOSTATES is incremented). XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in xfrm6_rcv_spi(). A new function xfrm6_rcv_tnl() that enables to pass a value to xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function is used in several handlers). CC: Alexey Kodanev <alexey.kodanev@oracle.com> Fixes: 1625f4529957 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-08-11net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_keyAlexey Kodanev
Running LTP 'icmp-uni-basic.sh -6 -p ipcomp -m tunnel' test over openvswitch + veth can trigger kernel panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: [<ffffffff8169d1d2>] xfrm_input+0x82/0x750 ... [<ffffffff816d472e>] xfrm6_rcv_spi+0x1e/0x20 [<ffffffffa082c3c2>] xfrm6_tunnel_rcv+0x42/0x50 [xfrm6_tunnel] [<ffffffffa082727e>] tunnel6_rcv+0x3e/0x8c [tunnel6] [<ffffffff8169f365>] ip6_input_finish+0xd5/0x430 [<ffffffff8169fc53>] ip6_input+0x33/0x90 [<ffffffff8169f1d5>] ip6_rcv_finish+0xa5/0xb0 ... It seems that tunnel.ip6 can have garbage values and also dereferenced without a proper check, only tunnel.ip4 is being verified. Fix it by adding one more if block for AF_INET6 and initialize tunnel.ip6 with NULL inside xfrm6_rcv_spi() (which is similar to xfrm4_rcv_spi()). Fixes: 049f8e2 ("xfrm: Override skb->mark with tunnel->parm.i_key in xfrm_input") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-09-17netfilter: Pass struct net into the netfilter hooksEric W. Biederman
Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07netfilter: Pass socket pointer down through okfn().David Miller
On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24ipv6: White-space cleansing : gaps between function and symbol exportIan Morris
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. This patch removes some blank lines between the end of a function definition and the EXPORT_SYMBOL_GPL macro in order to prevent checkpatch warning that EXPORT_SYMBOL must immediately follow a function. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24ipv6: White-space cleansing : Line LayoutsIan Morris
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25netfilter: ipv6: use NFPROTO values for NF_HOOK invocationJan Engelhardt
The semantic patch that was used: // <smpl> @@ @@ (NF_HOOK |NF_HOOK_THRESH |nf_hook )( -PF_INET6, +NFPROTO_IPV6, ...) // </smpl> Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-22xfrm: SA lookups signature with markJamal Hadi Salim
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: per-netns MIBsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: state lookup in netnsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[XFRM] IPV6: Optimize xfrm6_input_addr().YOSHIFUJI Hideaki
| % size old/net/ipv6/xfrm6_input.o new/net/ipv6/xfrm6_input.o | text data bss dec hex filename | 1026 0 0 1026 402 old/net/ipv6/xfrm6_input.o | 947 0 0 947 3b3 new/net/ipv6/xfrm6_input.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[IPSEC]: Fix transport-mode async resume on intput without netfilterHerbert Xu
When netfilter is off the transport-mode async resumption doesn't work because we don't push back the IP header. This patch fixes that by moving most of the code outside of ifdef NETFILTER since the only part that's not common is the short-circuit in the protocol handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[XFRM]: RFC4303 compliant auditingPaul Moore
This patch adds a number of new IPsec audit events to meet the auditing requirements of RFC4303. This includes audit hooks for the following events: * Could not find a valid SA [sections 2.1, 3.4.2] . xfrm_audit_state_notfound() . xfrm_audit_state_notfound_simple() * Sequence number overflow [section 3.3.3] . xfrm_audit_state_replay_overflow() * Replayed packet [section 3.4.3] . xfrm_audit_state_replay() * Integrity check failure [sections 3.4.4.1, 3.4.4.2] . xfrm_audit_state_icvfail() While RFC4304 deals only with ESP most of the changes in this patch apply to IPsec in general, i.e. both AH and ESP. The one case, integrity check failure, where ESP specific code had to be modified the same was done to the AH code for the sake of consistency. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[XFRM]: Support to increment packet dropping statistics.Masahide NAKAMURA
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[XFRM] MIPv6: Fix to input RO state correctly.Masahide NAKAMURA
Disable spin_lock during xfrm_type.input() function. Follow design as IPsec inbound does. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Use the correct family for input state lookupHerbert Xu
When merging the input paths of IPsec I accidentally left a hard-coded AF_INET for the state lookup call. This broke IPv6 obviously. This patch fixes by getting the input callers to specify the family through skb->cb. Credit goes to Kazunori Miyazawa for diagnosing this and providing an initial patch. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETFILTER]: Introduce NF_INET_ hook valuesPatrick McHardy
The IPv4 and IPv6 hook values are identical, yet some code tries to figure out the "correct" value by looking at the address family. Introduce NF_INET_* values for both IPv4 and IPv6. The old values are kept in a #ifndef __KERNEL__ section for userspace compatibility. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Add async resume support on inputHerbert Xu
This patch adds support for async resumptions on input. To do so, the transform would return -EINPROGRESS and subsequently invoke the function xfrm_input_resume to resume processing. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Remove nhoff from xfrm_inputHerbert Xu
The nhoff field isn't actually necessary in xfrm_input. For tunnel mode transforms we now throw away the output IP header so it makes no sense to fill in the nexthdr field. For transport mode we can now let the function transport_finish do the setting and it knows where the nexthdr field is. The only other thing that needs the nexthdr field to be set is the header extraction code. However, we can simply move the protocol extraction out of the generic header extraction. We want to minimise the amount of info we have to carry around between transforms as this simplifies the resumption process for async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Merge most of the input pathHerbert Xu
As part of the work on asynchronous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common input code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Separate inner/outer mode processing on inputHerbert Xu
With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the input path so that each function deals with one family only. In particular, the functions xfrm4_extract_inut/xfrm6_extract_inut moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the inner mode input functions to modify the inner IP header. In this way the input function no longer has to know about the outer address family. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[IPSEC]: Rename mode to outer_mode and add inner_modeHerbert Xu
This patch adds a new field to xfrm states called inner_mode. The existing mode object is renamed to outer_mode. This is the first part of an attempt to fix inter-family transforms. As it is we always use the outer family when determining which mode to use. As a result we may end up shoving IPv4 packets into netfilter6 and vice versa. What we really want is to use the inner family for the first part of outbound processing and the outer family for the second part. For inbound processing we'd use the opposite pairing. I've also added a check to prevent silly combinations such as transport mode with inter-family transforms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[IPSEC]: Add missing BEET checksHerbert Xu
Currently BEET mode does not reinject the packet back into the stack like tunnel mode does. Since BEET should behave just like tunnel mode this is incorrect. This patch fixes this by introducing a flags field to xfrm_mode that tells the IPsec code whether it should terminate and reinject the packet back into the stack. It then sets the flag for BEET and tunnel mode. I've also added a number of missing BEET checks elsewhere where we check whether a given mode is a tunnel or not. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[IPSEC]: Move ip_summed zapping out of xfrm6_rcv_spiHerbert Xu
Not every transform needs to zap ip_summed. For example, a pure tunnel mode encapsulation does not affect the hardware checksum at all. In fact, every algorithm (that needs this) other than AH6 already does its own ip_summed zapping. This patch moves the zapping into AH6 which is in line with what IPv4 does. Possible future optimisation: Checksum the data as we copy them in IPComp. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17[IPSEC]: Get nexthdr from caller in xfrm6_rcv_spiHerbert Xu
Currently xfrm6_rcv_spi gets the nexthdr value itself from the packet. This means that we need to fix up the value in case we have a 4-on-6 tunnel. Moving this logic into the caller simplifies things and allows us to merge the code with IPv4. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15[IPV6]: Replace sk_buff ** with sk_buff * in input handlersHerbert Xu
With all the users of the double pointers removed from the IPv6 input path, this patch converts all occurances of sk_buff ** to sk_buff * in IPv6 input handlers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-31[IPSEC]: Fix panic when using inter address familiy IPsec on loopback.Kazunori MIYAZAWA
Signed-off-by: Kazunori MIYAZAWA <kazunori@miyazawa.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] XFRM: Use ip6addr_any where applicable.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-25[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6hArnaldo Carvalho de Melo
Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_network_header()Arnaldo Carvalho de Melo
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6]: Decentralize EXPORT_SYMBOLs.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-02-13[IPSEC]: changing API of xfrm6_tunnel_registerKazunori MIYAZAWA
This patch changes xfrm6_tunnel register and deregister interface to prepare for solving the conflict of device tunnels with inter address family IPsec tunnel. There is no device which conflicts with IPv4 over IPv6 IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10[NET] IPV6: Fix whitespace errors.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: xrfm_replay_check() annotationsAl Viro
seq argument is net-endian Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: xfrm_parse_spi() annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Common receive function for route optimization extension headers.Masahide NAKAMURA
XFRM_STATE_WILDRECV flag is introduced; the last resort state is set it and receives packet which is not route optimized but uses such extension headers i.e. Mobile IPv6 signaling (binding update and acknowledgement). A node enabled Mobile IPv6 adds the state. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add XFRM_MODE_xxx for future use.Masahide NAKAMURA
Transformation mode is used as either IPsec transport or tunnel. It is required to add two more items, route optimization and inbound trigger for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IPSEC] xfrm: Abstract out encapsulation modesHerbert Xu
This patch adds the structure xfrm_mode. It is meant to represent the operations carried out by transport/tunnel modes. By doing this we allow additional encapsulation modes to be added without clogging up the xfrm_input/xfrm_output paths. Candidate modes include 4-to-6 tunnel mode, 6-to-4 tunnel mode, and BEET modes. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01[IPSEC]: Kill unused decap state structureHerbert Xu
This patch removes the *_decap_state structures which were previously used to share state between input/post_input. This is no longer needed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>