summaryrefslogtreecommitdiff
path: root/net/ipv6
AgeCommit message (Collapse)Author
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07vrf: sit mtu should not be updated when vrf netdev is the linkStephen Suryaputra
VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: use indirect calls helpers at early demux stagePaolo Abeni
So that we avoid another indirect call per RX packet, if early demux is enabled. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: use indirect calls helpers for L3 handler hooksPaolo Abeni
So that we avoid another indirect call per RX packet in the common case. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01ipv6: A few fixes on dereferencing rt->fromMartin KaFai Lau
It is a followup after the fix in commit 9c69a1320515 ("route: Avoid crash from dereferencing NULL rt->from") rt6_do_redirect(): 1. NULL checking is needed on rt->from because a parallel fib6_info delete could happen that sets rt->from to NULL. (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()). 2. fib6_info_hold() is not enough. Same reason as (1). Meaning, holding dst->__refcnt cannot ensure rt->from is not NULL or rt->from->fib6_ref is not 0. Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc() is already doing, this patch chooses to extend the rcu section to keep "from" dereference-able after checking for NULL. inet6_rtm_getroute(): 1. NULL checking is also needed on rt->from for a similar reason. Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED. Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30ipv6: fix races in ip6_dst_destroy()Eric Dumazet
We had many syzbot reports that seem to be caused by use-after-free of struct fib6_info. ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception() are writers vs rt->from, and use non consistent synchronization among themselves. Switching to xchg() will solve the issues with no possible lockdep issues. BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline] BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649 CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 kasan_report.cold+0x5/0x40 mm/kasan/report.c:321 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 kasan_check_write+0x14/0x20 mm/kasan/common.c:108 atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] fib6_info_release include/net/ip6_fib.h:294 [inline] fib6_info_release include/net/ip6_fib.h:292 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 fib6_del_route net/ipv6/ip6_fib.c:1813 [inline] fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844 fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006 fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976 fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055 __fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071 fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082 rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057 rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062 addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705 addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753 call_netdevice_notifiers_extack net/core/dev.c:1765 [inline] call_netdevice_notifiers net/core/dev.c:1779 [inline] dev_close_many+0x33f/0x6f0 net/core/dev.c:1522 rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177 rollback_registered+0x109/0x1d0 net/core/dev.c:8242 unregister_netdevice_queue net/core/dev.c:9289 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282 unregister_netdevice include/linux/netdevice.h:2658 [inline] __tun_detach+0xd5b/0x1000 drivers/net/tun.c:727 tun_detach drivers/net/tun.c:744 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443 __fput+0x2e5/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x90a/0x2fa0 kernel/exit.c:876 do_group_exit+0x135/0x370 kernel/exit.c:980 __do_sys_exit_group kernel/exit.c:991 [inline] __se_sys_exit_group kernel/exit.c:989 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9 RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043 RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1 R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800 Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2019-04-30 1) A lot of work to remove indirections from the xfrm code. From Florian Westphal. 2) Support ESP offload in combination with gso partial. From Boris Pismenny. 3) Remove some duplicated code from vti4. From Jeremy Sowden. Please note that there is merge conflict between commit: 8742dc86d0c7 ("xfrm4: Fix uninitialized memory read in _decode_session4") from the ipsec tree and commit: c53ac41e3720 ("xfrm: remove decode_session indirection from afinfo_policy") from the ipsec-next tree. The merge conflict will appear when those trees get merged during the merge window. The conflict can be solved as it is done in linux-next: https://lkml.org/lkml/2019/4/25/1207 Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-04-30 1) Fix an out-of-bound array accesses in __xfrm_policy_unlink. From YueHaibing. 2) Reset the secpath on failure in the ESP GRO handlers to avoid dereferencing an invalid pointer on error. From Myungho Jung. 3) Add and revert a patch that tried to add rcu annotations to netns_xfrm. From Su Yanjun. 4) Wait for rcu callbacks before freeing xfrm6_tunnel_spi_kmem. From Su Yanjun. 5) Fix forgotten vti4 ipip tunnel deregistration. From Jeremy Sowden: 6) Remove some duplicated log messages in vti4. From Jeremy Sowden. 7) Don't use IPSEC_PROTO_ANY when flushing states because this will flush only IPsec portocol speciffic states. IPPROTO_ROUTING states may remain in the lists when doing net exit. Fix this by replacing IPSEC_PROTO_ANY with zero. From Cong Wang. 8) Add length check for UDP encapsulation to fix "Oversized IP packet" warnings on receive side. From Sabrina Dubroca. 9) Fix xfrm interface lookup when the interface is associated to a vrf layer 3 master device. From Martin Willi. 10) Reload header pointers after pskb_may_pull() in _decode_session4(), otherwise we may read from uninitialized memory. 11) Update the documentation about xfrm[46]_gc_thresh, it is not used anymore after the flowcache removal. From Nicolas Dichtel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ipv6/flowlabel: wait rcu grace period before put_pid()Eric Dumazet
syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when ↵Stephen Suryaputra
sending dest unreach When there is no route to an IPv6 dest addr, skb_dst(skb) points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail on icmpv6_send() and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev. To reproduce: * Gateway configuration: ip link add dev vrf_258 type vrf table 258 ip link set dev enp0s9 master vrf_258 ip addr add 66:1/64 dev enp0s9 ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1 sysctl -w net.ipv6.conf.enp0s9.forwarding=1 * Sender configuration: ip addr add 66::2/64 dev enp0s9 ip -6 route add default via 66::1 and ping 67::1 for example from the sender. Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup. v2: Fix typo of destination address in the repro steps. v3: Simplify the loopback check (per David Ahern) and use reverse Christmas tree format (per David Miller). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29ipv6: invert flowlabel sharing check in process and user modeWillem de Bruijn
A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23ipv6: Use result arg in fib_lookup_arg consistentlyDavid Ahern
arg.result is sometimes used as fib6_result and sometimes used to hold the rt6_info. Add rt6_info to fib6_result and make the use of arg.result consistent through ipv6 rules. The rt6 entry is filled in for lookups returning a dst_entry, but not for direct fib_lookups that just want a fib6_info. Fixes: effda4dd97e8 ("ipv6: Pass fib6_result to fib lookups") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23ipv6: fib6_rule_action_alt needs to return -EAGAINDavid Ahern
fib rule actions should return -EAGAIN for the rules to continue to the next one. A recent change overwrote err with the lookup always returning 0 (future change will make it more like IPv4) which means the rules stopped at the first (e.g., local table lookup only). Catch and reset err to -EAGAIN. Fixes: effda4dd97e87 ("ipv6: Pass fib6_result to fib lookups") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net: Change nhc_flags to unsigned charDavid Ahern
nhc_flags holds the RTNH_F flags for a given nexthop (fib{6}_nh). All of the RTNH_F_ flags fit in an unsigned char, and since the API to userspace (rtnh_flags and lower byte of rtm_flags) is 1 byte it can not grow. Make nhc_flags in fib_nh_common an unsigned char and shrink the size of the struct by 8, from 56 to 48 bytes. Update the flags arguments for up netdevice events and fib_nexthop_info which determines the RTNH_F flags to return on a dump/event. The RTNH_F flags are passed in the lower byte of rtm_flags which is an unsigned int so use a temp variable for the flags to fib_nexthop_info and combine with rtm_flags in the caller. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23ipv6: convert fib6_ref to refcount_tEric Dumazet
We suspect some issues involving fib6_ref 0 -> 1 transitions might cause strange syzbot reports. Lets convert fib6_ref to refcount_t to catch them earlier. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Acked-by: Wei Wang <weiwan@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23ipv6: broadly use fib6_info_hold() helperEric Dumazet
Instead of using atomic_inc(), prefer fib6_info_hold() so that upcoming refcount_t conversion is simpler. Only fib6_info_alloc() is using atomic_set() since we just allocated a new object. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Acked-by: Wei Wang <weiwan@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23ipv6: fib6_info_destroy_rcu() cleanupEric Dumazet
We do not need to clear f6i->rt6i_exception_bucket right before freeing f6i. Note that f6i->rt6i_exception_bucket is properly protected by f6i->exception_bucket_flushed being set to one in rt6_flush_exceptions() under the protection of rt6_exception_lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Acked-by: Wei Wang <weiwan@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23xfrm: remove unneeded export_symbolsFlorian Westphal
None of them have any external callers, make them static. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23xfrm: remove decode_session indirection from afinfo_policyFlorian Westphal
No external dependencies, might as well handle this directly. xfrm_afinfo_policy is now 40 bytes on x86_64. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23xfrm: remove init_path indirection from afinfo_policyFlorian Westphal
handle this directly, its only used by ipv6. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23xfrm: remove tos indirection from afinfo_policyFlorian Westphal
Only used by ipv4, we can read the fl4 tos value directly instead. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-22net: Rename net/nexthop.h net/rtnh.hDavid Ahern
The header contains rtnh_ macros so rename the file accordingly. Allows a later patch to use the nexthop.h name for the new nexthop code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: rework SIOCGSTAMP ioctl handlingArnd Bergmann
The SIOCGSTAMP/SIOCGSTAMPNS ioctl commands are implemented by many socket protocol handlers, and all of those end up calling the same sock_get_timestamp()/sock_get_timestampns() helper functions, which results in a lot of duplicate code. With the introduction of 64-bit time_t on 32-bit architectures, this gets worse, as we then need four different ioctl commands in each socket protocol implementation. To simplify that, let's add a new .gettstamp() operation in struct proto_ops, and move ioctl implementation into the common sock_ioctl()/compat_sock_ioctl_trans() functions that these all go through. We can reuse the sock_get_timestamp() implementation, but generalize it so it can deal with both native and compat mode, as well as timeval and timespec structures. Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/lkml/CAK8P3a038aDQQotzua_QtKGhq8O9n+rdiz2=WDCp82ys8eUT+A@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18ipv6: Add rate limit mask for ICMPv6 messagesStephen Suryaputra
To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP message types use larger numeric values, a simple bitmask doesn't fit. I use large bitmap. The input and output are the in form of list of ranges. Set the default to rate limit all error messages but Packet Too Big. For Packet Too Big, use ratemask instead of hard-coded. There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow() aren't called. This patch only adds them to icmpv6_echo_reply(). Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says that it is also acceptable to rate limit informational messages. Thus, I removed the current hard-coded behavior of icmpv6_mask_allow() that doesn't rate limit informational messages. v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL isn't defined, expand the description in ip-sysctl.txt and remove unnecessary conditional before kfree(). v3: Inline the bitmap instead of dynamically allocated. Still is a pointer to it is needed because of the way proc_do_large_bitmap work. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18net: ipv6: addrlabel: fix spelling mistake "requewst" -> "request"Colin Ian King
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17net ipv6: Prevent neighbor add if protocol is disabled on deviceDavid Ahern
Disabling IPv6 on an interface removes existing entries but nothing prevents new entries from being manually added. To that end, add a new neigh_table operation, allow_add, that is called on RTM_NEWNEIGH to see if neighbor entries are allowed on a given device. If IPv6 is disabled on the device, allow_add returns false and passes a message back to the user via extack. $ echo 1 > /proc/sys/net/ipv6/conf/eth1/disable_ipv6 $ ip -6 neigh add fe80::4c88:bff:fe21:2704 dev eth1 lladdr de:ad:be:ef:01:01 Error: IPv6 is disabled on this device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Add fib6_type and fib6_flags to fib6_resultDavid Ahern
Add the fib6_flags and fib6_type to fib6_result. Update the lookup helpers to set them and update post fib lookup users to use the version from the result. This allows nexthop objects to have blackhole nexthop. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to fib lookupsDavid Ahern
Change fib6_lookup and fib6_table_lookup to take a fib6_result and set f6i and nh rather than returning a fib6_info. For now both always return 0. A later patch set can make these more like the IPv4 counterparts and return EINVAL, EACCESS, etc based on fib6_type. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to fib6_table_lookup tracepointDavid Ahern
Change fib6_table_lookup tracepoint to take the fib6_result and use the fib6_info and fib6_nh from it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to rt6_select and find_rr_leafDavid Ahern
Pass fib6_result to rt6_select. Instead of returning the fib entry, it will set f6i and nh based on the lookup. find_rr_leaf is changed to remove the match option in favor of taking fib6_result and having __find_rr_leaf set f6i in the result. In the process, update fib6_info references in __find_rr_leaf to f6i names. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to rt6_device_matchDavid Ahern
Pass fib6_result to rt6_device_match with f6i set. rt6_device_match updates f6i in the result if it finds a better match and sets nh. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to ip6_mtu_from_fib6 and fib6_mtuDavid Ahern
Change ip6_mtu_from_fib6 and fib6_mtu to take a fib6_result over a fib6_info. Update both to use the fib6_nh from fib6_result. Since the signature of ip6_mtu_from_fib6 is already changing, add const to daddr and saddr. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to rt6_insert_exceptionDavid Ahern
Update rt6_insert_exception to take a fib6_result over a fib6_info. Change ort to f6i from the fib6_result and rename to better reflect what it references (a fib6_info). Since this function is already getting changed, update the comments to reference fib6_info variables rather than the older rt6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to ip6_rt_get_dev_rcu and ip6_rt_copy_initDavid Ahern
Now that all callers are update to have a fib6_result, pass it down to ip6_rt_get_dev_rcu, ip6_rt_copy_init, and ip6_rt_init_dst. In the process, change ort to f6i in ip6_rt_copy_init to make it clear it is a reference to a fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to pcpu route functionsDavid Ahern
Update ip6_rt_pcpu_alloc, rt6_get_pcpu_route and rt6_make_pcpu_route to a fib6_result over a fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to ip6_create_rt_rcuDavid Ahern
Change ip6_create_rt_rcu to take fib6_result over a fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to ip6_rt_cache_allocDavid Ahern
Change ip6_rt_cache_alloc to take a fib6_result over a fib6_info. Since ip6_rt_cache_alloc is only the caller, update the rt6_is_gw_or_nonexthop helper to take fib6_result. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to rt6_find_cached_rtDavid Ahern
Simplify rt6_find_cached_rt for the fast path cases and pass fib6_result to rt6_find_cached_rt. Rename the local return variable to ret to maintain consisting with fib6_result name. Update the comment in rt6_find_cached_rt to reference the new names in a fib6_info vs the old name when fib entries were an rt6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Rename fib6_multipath_select and pass fib6_resultDavid Ahern
Add 'struct fib6_result' to hold the fib entry and fib6_nh from a fib lookup as separate entries, similar to what IPv4 now has with fib_result. Rename fib6_multipath_select to fib6_select_path, pass fib6_result to it, and set f6i and nh in the result once a path selection is done. Call fib6_select_path unconditionally for path selection which means moving the sibling and oif check to fib6_select_path. To handle the two different call paths (2 only call multipath_select if flowi6_oif == 0 and the other always calls it), add a new have_oif_match that controls the sibling walk if relevant. Update callers of fib6_multipath_select accordingly and have them use the fib6_info and fib6_nh from the result. This is needed for multipath nexthop objects where a single f6i can point to multiple fib6_nh (similar to IPv4). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15route: Avoid crash from dereferencing NULL rt->fromJonathan Lemon
When __ip6_rt_update_pmtu() is called, rt->from is RCU dereferenced, but is never checked for null - rt6_flush_exceptions() may have removed the entry. [ 1913.989004] RIP: 0010:ip6_rt_cache_alloc+0x13/0x170 [ 1914.209410] Call Trace: [ 1914.214798] <IRQ> [ 1914.219226] __ip6_rt_update_pmtu+0xb0/0x190 [ 1914.228649] ip6_tnl_xmit+0x2c2/0x970 [ip6_tunnel] [ 1914.239223] ? ip6_tnl_parse_tlv_enc_lim+0x32/0x1a0 [ip6_tunnel] [ 1914.252489] ? __gre6_xmit+0x148/0x530 [ip6_gre] [ 1914.262678] ip6gre_tunnel_xmit+0x17e/0x3c7 [ip6_gre] [ 1914.273831] dev_hard_start_xmit+0x8d/0x1f0 [ 1914.283061] sch_direct_xmit+0xfa/0x230 [ 1914.291521] __qdisc_run+0x154/0x4b0 [ 1914.299407] net_tx_action+0x10e/0x1f0 [ 1914.307678] __do_softirq+0xca/0x297 [ 1914.315567] irq_exit+0x96/0xa0 [ 1914.322494] smp_apic_timer_interrupt+0x68/0x130 [ 1914.332683] apic_timer_interrupt+0xf/0x20 [ 1914.341721] </IRQ> Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for net-next: 1) Remove the broute pseudo hook, implement this from the bridge prerouting hook instead. Now broute becomes real table in ebtables, from Florian Westphal. This also includes a size reduction patch for the bridge control buffer area via squashing boolean into bitfields and a selftest. 2) Add OS passive fingerprint version matching, from Fernando Fernandez. 3) Support for gue encapsulation for IPVS, from Jacky Hu. 4) Add support for NAT to the inet family, from Florian Westphal. This includes support for masquerade, redirect and nat extensions. 5) Skip interface lookup in flowtable, use device in the dst object. 6) Add jiffies64_to_msecs() and use it, from Li RongQing. 7) Remove unused parameter in nf_tables_set_desc_parse(), from Colin Ian King. 8) Statify several functions, patches from YueHaibing and Florian Westphal. 9) Add an optimized version of nf_inet_addr_cmp(), from Li RongQing. 10) Merge route extension to core, also from Florian. 11) Use IS_ENABLED(CONFIG_NF_NAT) instead of NF_NAT_NEEDED, from Florian. 12) Merge ip/ip6 masquerade extensions, from Florian. This includes netdevice notifier unification. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12ipv6: Remove flowi6_oif compare from __ip6_route_redirectDavid Ahern
In the review of 0b34eb004347 ("ipv6: Refactor __ip6_route_redirect"), Martin noted that the flowi6_oif compare is moved to the new helper and should be removed from __ip6_route_redirect. Fix the oversight. Fixes: 0b34eb004347 ("ipv6: Refactor __ip6_route_redirect") Reported-by: Martin Lau <kafai@fb.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12udpv6: Check address length before reading address familyTetsuo Handa
KMSAN will complain if valid address length passed to udpv6_pre_connect() is shorter than sizeof("struct sockaddr"->sa_family) bytes. (This patch is bogus if it is guaranteed that udpv6_pre_connect() is always called after checking "struct sockaddr"->sa_family. In that case, we want a comment why we don't need to check valid address length here.) Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11ipv6: Refactor __ip6_route_redirectDavid Ahern
Move the nexthop evaluation of a fib entry to a helper that can be leveraged for each fib6_nh in a multipath nexthop object. In the move, 'continue' statements means the helper returns false (loop should continue) and 'break' means return true (found the entry of interest). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-21 12:49:06 +0000