Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's register inet6_rtm_deladdr() with RTNL_FLAG_DOIT_PERNET and
hold rtnl_net_lock() before inet6_addr_del().
Now that inet6_addr_del() is always called under per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's register inet6_rtm_newaddr() with RTNL_FLAG_DOIT_PERNET
and hold rtnl_net_lock() before __dev_get_by_index().
Now that inet6_addr_add() and inet6_addr_modify() are always
called under per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet6_addr_add() and inet6_addr_modify() have the same code to validate
IPv6 lifetime that is done under RTNL.
Let's factorise it out to inet6_rtm_newaddr() so that we can validate
the lifetime without RTNL later.
Note that inet6_addr_add() is called from addrconf_add_ifaddr(), but the
lifetime is INFINITY_LIFE_TIME in the path, so expires and flags are 0.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will convert inet6_rtm_newaddr() to per-netns RTNL.
Except for IFA_F_OPTIMISTIC, cfg.ifa_flags can be set before
__dev_get_by_index().
Let's move ifa_flags setup before __dev_get_by_index() so that
we can set ifa_flags without RTNL.
Also, now it's moved before tb[IFA_CACHEINFO] in preparing for
the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet6_addr_add() is called from inet6_rtm_newaddr() and
addrconf_add_ifaddr().
inet6_addr_add() looks up dev by __dev_get_by_index(), but
it's already done in inet6_rtm_newaddr().
Let's move the 2nd lookup to addrconf_add_ifaddr() and pass
dev to inet6_addr_add().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These functions are called from inet6_ioctl() with a socket's netns
and hold RTNL.
* SIOCSIFADDR : addrconf_add_ifaddr()
* SIOCDIFADDR : addrconf_del_ifaddr()
* SIOCSIFDSTADDR : addrconf_set_dstaddr()
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_init() holds RTNL for blackhole_netdev, which is the global
device in init_net.
addrconf_cleanup() holds RTNL to clean up devices in init_net too.
Let's use rtnl_net_lock(&init_net) there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_dad_work() is per-address work and holds RTNL internally.
We can fetch netns as dev_net(ifp->idev->dev).
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_verify_work() is per-netns work to call addrconf_verify_rtnl()
under RTNL.
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net.ipv6.conf.${DEV}.XXX sysctl are changed under RTNL:
* forwarding
* ignore_routes_with_linkdown
* disable_ipv6
* proxy_ndp
* addr_gen_mode
* stable_secret
* disable_policy
Let's use rtnl_net_lock() there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xfrm assumed to always have a full socket at skb->sk.
This is not always true, so fix it by converting to a
full socket before it is used.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
Following fields of 'struct mr_mfc' can be updated
concurrently (no lock protection) from ip_mr_forward()
and ip6_mr_forward()
- bytes
- pkt
- wrong_if
- lastuse
They also can be read from other functions.
Convert bytes, pkt and wrong_if to atomic_long_t,
and use READ_ONCE()/WRITE_ONCE() for lastuse.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change introduces a mechanism for notifying userspace
applications about changes to IPv6 anycast addresses via netlink. It
includes:
* Addition and deletion of IPv6 anycast addresses are reported using
RTM_NEWANYCAST and RTM_DELANYCAST.
* A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these
notifications.
This enables user space applications(e.g. ip monitor) to efficiently
track anycast addresses through netlink messages, improving metrics
collection and system monitoring. It also unlocks the potential for
advanced anycast management in user space, such as hardware offload
control and fine grained network control.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc6).
No conflicts.
Adjacent changes:
include/linux/if_vlan.h
f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK")
3f330db30638 ("net: reformat kdoc return statements")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:489
kasan_report+0xd9/0x110 mm/kasan/report.c:602
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:127 [inline]
ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
ila_nf_input+0x1ee/0x620 net/ipv6/ila/ila_xlat.c:185
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:626
nf_hook.constprop.0+0x42e/0x750 include/linux/netfilter.h:269
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0xa4/0x680 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core+0x12e/0x1e0 net/core/dev.c:5672
__netif_receive_skb+0x1d/0x160 net/core/dev.c:5785
process_backlog+0x443/0x15f0 net/core/dev.c:6117
__napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6883
napi_poll net/core/dev.c:6952 [inline]
net_rx_action+0xa94/0x1010 net/core/dev.c:7074
handle_softirqs+0x213/0x8f0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0x109/0x170 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049
Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot+47e761d22ecf745f72b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6772c9ae.050a0220.2f3838.04c7.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Tom Herbert <tom@herbertland.com>
Link: https://patch.msgid.link/20241230162849.2795486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Corrected the netlink message size calculation for multicast group
join/leave notifications. The previous calculation did not account for
the inclusion of both IPv4/IPv6 addresses and ifa_cacheinfo in the
payload. This fix ensures that the allocated message size is
sufficient to hold all necessary information.
This patch also includes the following improvements:
* Uses GFP_KERNEL instead of GFP_ATOMIC when holding the RTNL mutex.
* Uses nla_total_size(sizeof(struct in6_addr)) instead of
nla_total_size(16).
* Removes unnecessary EXPORT_SYMBOL().
Fixes: 2c2b61d2138f ("netlink: add IGMP/MLD join/leave notifications")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20241221100007.1910089-1-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a UDP socket changes its local address while it's receiving
datagrams, as a result of connect(), there is a period during which
a lookup operation might fail to find it, after the address is changed
but before the secondary hash (port and address) and the four-tuple
hash (local and remote ports and addresses) are updated.
Secondary hash chains were introduced by commit 30fff9231fad ("udp:
bind() optimisation") and, as a result, a rehash operation became
needed to make a bound socket reachable again after a connect().
This operation was introduced by commit 719f835853a9 ("udp: add
rehash on connect()") which isn't however a complete fix: the
socket will be found once the rehashing completes, but not while
it's pending.
This is noticeable with a socat(1) server in UDP4-LISTEN mode, and a
client sending datagrams to it. After the server receives the first
datagram (cf. _xioopen_ipdgram_listen()), it issues a connect() to
the address of the sender, in order to set up a directed flow.
Now, if the client, running on a different CPU thread, happens to
send a (subsequent) datagram while the server's socket changes its
address, but is not rehashed yet, this will result in a failed
lookup and a port unreachable error delivered to the client, as
apparent from the following reproducer:
LEN=$(($(cat /proc/sys/net/core/wmem_default) / 4))
dd if=/dev/urandom bs=1 count=${LEN} of=tmp.in
while :; do
taskset -c 1 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.1 || sleep 1
taskset -c 2 socat OPEN:tmp.in UDP4:localhost:1337,shut-null
wait
done
where the client will eventually get ECONNREFUSED on a write()
(typically the second or third one of a given iteration):
2024/11/13 21:28:23 socat[46901] E write(6, 0x556db2e3c000, 8192): Connection refused
This issue was first observed as a seldom failure in Podman's tests
checking UDP functionality while using pasta(1) to connect the
container's network namespace, which leads us to a reproducer with
the lookup error resulting in an ICMP packet on a tap device:
LOCAL_ADDR="$(ip -j -4 addr show|jq -rM '.[] | .addr_info[0] | select(.scope == "global").local')"
while :; do
./pasta --config-net -p pasta.pcap -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.2 || sleep 1
socat OPEN:tmp.in UDP4:${LOCAL_ADDR}:1337,shut-null
wait
cmp tmp.in tmp.out
done
Once this fails:
tmp.in tmp.out differ: char 8193, line 29
we can finally have a look at what's going on:
$ tshark -r pasta.pcap
1 0.000000 :: ? ff02::16 ICMPv6 110 Multicast Listener Report Message v2
2 0.168690 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
3 0.168767 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
4 0.168806 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
5 0.168827 c6:47:05:8d:dc:04 ? Broadcast ARP 42 Who has 88.198.0.161? Tell 88.198.0.164
6 0.168851 9a:55:9a:55:9a:55 ? c6:47:05:8d:dc:04 ARP 42 88.198.0.161 is at 9a:55:9a:55:9a:55
7 0.168875 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
8 0.168896 88.198.0.164 ? 88.198.0.161 ICMP 590 Destination unreachable (Port unreachable)
9 0.168926 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
10 0.168959 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
11 0.168989 88.198.0.161 ? 88.198.0.164 UDP 4138 60260 ? 1337 Len=4096
12 0.169010 88.198.0.161 ? 88.198.0.164 UDP 42 60260 ? 1337 Len=0
On the third datagram received, the network namespace of the container
initiates an ARP lookup to deliver the ICMP message.
In another variant of this reproducer, starting the client with:
strace -f pasta --config-net -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc 2>strace.log &
and connecting to the socat server using a loopback address:
socat OPEN:tmp.in UDP4:localhost:1337,shut-null
we can more clearly observe a sendmmsg() call failing after the
first datagram is delivered:
[pid 278012] connect(173, 0x7fff96c95fc0, 16) = 0
[...]
[pid 278012] recvmmsg(173, 0x7fff96c96020, 1024, MSG_DONTWAIT, NULL) = -1 EAGAIN (Resource temporarily unavailable)
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = 1
[...]
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = -1 ECONNREFUSED (Connection refused)
and, somewhat confusingly, after a connect() on the same socket
succeeded.
Until commit 4cdeeee9252a ("net: udp: prefer listeners bound to an
address"), the race between receive address change and lookup didn't
actually cause visible issues, because, once the lookup based on the
secondary hash chain failed, we would still attempt a lookup based on
the primary hash (destination port only), and find the socket with the
outdated secondary hash.
That change, however, dropped port-only lookups altogether, as side
effect, making the race visible.
To fix this, while avoiding the need to make address changes and
rehash atomic against lookups, reintroduce primary hash lookups as
fallback, if lookups based on four-tuple and secondary hashes fail.
To this end, introduce a simplified lookup implementation, which
doesn't take care of SO_REUSEPORT groups: if we have one, there are
multiple sockets that would match the four-tuple or secondary hash,
meaning that we can't run into this race at all.
v2:
- instead of synchronising lookup operations against address change
plus rehash, reintroduce a simplified version of the original
primary hash lookup as fallback
v1:
- fix build with CONFIG_IPV6=n: add ifdef around sk_v6_rcv_saddr
usage (Kuniyuki Iwashima)
- directly use sk_rcv_saddr for IPv4 receive addresses instead of
fetching inet_rcv_saddr (Kuniyuki Iwashima)
- move inet_update_saddr() to inet_hashtables.h and use that
to set IPv4/IPv6 addresses as suitable (Kuniyuki Iwashima)
- rebase onto net-next, update commit message accordingly
Reported-by: Ed Santiago <santiago@redhat.com>
Link: https://github.com/containers/podman/issues/24147
Analysed-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: 30fff9231fad ("udp: bind() optimisation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The default IPv6 multipath hash policy takes the flow label into account
when calculating a multipath hash and previous patches added a flow
label selector to IPv6 FIB rules.
Allow user space to specify a flow label in route get requests by adding
a new netlink attribute and using its value to populate the "flowlabel"
field in the IPv6 flow info structure prior to a route lookup.
Deny the attribute in RTM_{NEW,DEL}ROUTE requests by checking for it in
rtm_to_fib6_config() and returning an error if present.
A subsequent patch will use this capability to test the new flow label
selector in IPv6 FIB rules.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement support for the new flow label selector which allows IPv6 FIB
rules to match on the flow label with a mask. Ensure that both flow
label attributes are specified (or none) and that the mask is valid.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95f7 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8d8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a22 ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change introduces netlink notifications for multicast address
changes. The following features are included:
* Addition and deletion of multicast addresses are reported using
RTM_NEWMULTICAST and RTM_DELMULTICAST messages with AF_INET and
AF_INET6.
* Two new notification groups: RTNLGRP_IPV4_MCADDR and
RTNLGRP_IPV6_MCADDR are introduced for receiving these events.
This change allows user space applications (e.g., ip monitor) to
efficiently track multicast group memberships by listening for netlink
events. Previously, applications relied on inefficient polling of
procfs, introducing delays. With netlink notifications, applications
receive realtime updates on multicast group membership changes,
enabling more precise metrics collection and system monitoring.
This change also unlocks the potential for implementing a wide range
of sophisticated multicast related features in user space by allowing
applications to combine kernel provided multicast address information
with user space data and communicate decisions back to the kernel for
more fine grained control. This mechanism can be used for various
purposes, including multicast filtering, IGMP/MLD offload, and
IGMP/MLD snooping.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Link: https://lore.kernel.org/r/20180906091056.21109-1-pruddy@vyatta.att-mail.com
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
psf->sf_count[MCAST_XXX] fields are read locklessly from
ipv6_chk_mcast_addr() and igmp6_mcf_seq_show().
Add READ_ONCE() and WRITE_ONCE() annotations accordingly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241210183352.86530-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mc->mca_sfcount[MCAST_EXCLUDE] is read locklessly from
ipv6_chk_mcast_addr().
Add READ_ONCE() and WRITE_ONCE() annotations accordingly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241210183352.86530-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a label and two gotos to shorten lines by two tabulations,
to ease code review of following patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241210183352.86530-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch mitigates the two-reallocations issue with rpl_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration would still
trigger two reallocations (i.e., empty cache), while next iterations
would only trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
there is no impact (it even shows improvement):
- before: https://ibb.co/nQJhqwc
- after: https://ibb.co/4ZvW6wV
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch mitigates the two-reallocations issue with seg6_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration would still
trigger two reallocations (i.e., empty cache), while next iterations
would only trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
the improvement:
- before: https://ibb.co/3Cg4sNH
- after: https://ibb.co/8rQ350r
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: David Lebrun <dlebrun@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch mitigates the two-reallocations issue with ioam6_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration may still trigger
two reallocations (i.e., empty cache), while next iterations would only
trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
the improvement:
- inline mode:
- before: https://ibb.co/LhQ8V63
- after: https://ibb.co/x5YT2bS
- encap mode:
- before: https://ibb.co/3Cjm5m0
- after: https://ibb.co/TwpsxTC
- encap mode with tunsrc:
- before: https://ibb.co/Gpy9QPg
- after: https://ibb.co/PW1bZFT
This patch also fixes an incorrect behavior: after the insertion, the
second call to skb_cow_head() makes sure that the dev has enough
headroom in the skb for layer 2 and stuff. In that case, the "old"
dst_entry was used, which is now fixed. After discussing with Paolo, it
appears that both patches can be merged into a single one -this one-
(for the sake of readability) and target net-next.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to
switch case and conditionals adjacent with the existing TUNNEL modes.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
UDP send path suffers from one indirect call to ip_generic_getfrag()
We can use INDIRECT_CALL_1() to avoid it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241203173617.2595451-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric reported a syzkaller-triggered splat caused by recent ipmr changes:
WARNING: CPU: 2 PID: 6041 at net/ipv6/ip6mr.c:419
ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Modules linked in:
CPU: 2 UID: 0 PID: 6041 Comm: syz-executor183 Not tainted
6.12.0-syzkaller-10681-g65ae975e97d5 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Code: 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c
02 00 75 58 49 83 bc 24 c0 0e 00 00 00 74 09 e8 44 ef a9 f7 90 <0f> 0b
90 e8 3b ef a9 f7 48 8d 7b 38 e8 12 a3 96 f7 48 89 df be 0f
RSP: 0018:ffffc90004267bd8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88803c710000 RCX: ffffffff89e4d844
RDX: ffff88803c52c880 RSI: ffffffff89e4d87c RDI: ffff88803c578ec0
RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88803c578000
R13: ffff88803c710000 R14: ffff88803c710008 R15: dead000000000100
FS: 00007f7a855ee6c0(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7a85689938 CR3: 000000003c492000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip6mr_rules_exit+0x176/0x2d0 net/ipv6/ip6mr.c:283
ip6mr_net_exit_batch+0x53/0xa0 net/ipv6/ip6mr.c:1388
ops_exit_list+0x128/0x180 net/core/net_namespace.c:177
setup_net+0x4fe/0x860 net/core/net_namespace.c:394
copy_net_ns+0x2b4/0x6b0 net/core/net_namespace.c:500
create_new_namespaces+0x3ea/0xad0 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x45d/0xa40 kernel/fork.c:3334
__do_sys_unshare kernel/fork.c:3405 [inline]
__se_sys_unshare kernel/fork.c:3403 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3403
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7a856332d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7a855ee238 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f7a856bd308 RCX: 00007f7a856332d9
RDX: 00007f7a8560f8c6 RSI: 0000000000000000 RDI: 0000000062040200
RBP: 00007f7a856bd300 R08: 00007fff932160a7 R09: 00007f7a855ee6c0
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a856bd30c
R13: 0000000000000000 R14: 00007fff93215fc0 R15: 00007fff932160a8
</TASK>
The root cause is a network namespace creation failing after successful
initialization of the ipmr subsystem. Such a case is not currently
matched by the ipmr_can_free_table() helper.
New namespaces are zeroed on allocation and inserted into net ns list
only after successful creation; when deleting an ipmr table, the list
next pointer can be NULL only on netns initialization failure.
Update the ipmr_can_free_table() checks leveraging such condition.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6e8cb445d4b43d006e0c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e8cb445d4b43d006e0c
Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/8bde975e21bbca9d9c27e36209b2dd4f1d7a3f00.1733212078.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dst objects get leaked in ip6_negative_advice() when this function is
executed for an expired IPv6 route located in the exception table. There
are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received,
resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must
start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run
before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has
expired and if no other socket holds a reference to the exception dst, the
refcount of the exception dst is 2, which corresponds to the increment
made by dst_init() and the increment made by the TCP socket for which the
connection is timing out. The refcount made by the socket is never
released. The refcount of the dst is decremented in sk_dst_reset() but
that decrement is counteracted by a dst_hold() intentionally placed just
before the sk_dst_reset() in ip6_negative_advice(). After
ip6_negative_advice() has finished, there is no other object tied to the
dst. The socket lost its reference stored in sk_dst_cache and the dst is
no longer in the exception table. The exception dst becomes a leaked
object.
As a result of this dst leak, an unbalanced refcount is reported for the
loopback device of a net namespace being destroyed under kernels that do
not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The
patch that introduced the dst_hold() in ip6_negative_advice() was
92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22
merely refactored the code with regards to the dst refcount so the issue
was present even before 92f1655aa2b22. The bug was introduced in
54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually
expired.") where the expired cached route is deleted and the sk_dst_cache
member of the socket is set to NULL by calling dst_negative_advice() but
the refcount belonging to the socket is left unbalanced.
The IPv4 version - ipv4_negative_advice() - is not affected by this bug.
When the TCP connection times out ipv4_negative_advice() merely resets the
sk_dst_cache of the socket while decrementing the refcount of the
exception dst.
Fixes: 92f1655aa2b22 ("net: fix __dst_negative_advice() race")
Fixes: 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.")
Link: https://lore.kernel.org/netdev/20241113105611.GA6723@incl/T/#u
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241128085950.GA4505@incl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found a NULL deref [1] in modify_prefix_route(), caused by one
fib6_info without a fib6_table pointer set.
This can happen for net->ipv6.fib6_null_entry
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 UID: 0 PID: 5837 Comm: syz-executor888 Not tainted 6.12.0-syzkaller-09567-g7eef7e306d3c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__lock_acquire+0xe4/0x3c40 kernel/locking/lockdep.c:5089
Code: 08 84 d2 0f 85 15 14 00 00 44 8b 0d ca 98 f5 0e 45 85 c9 0f 84 b4 0e 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 96 2c 00 00 49 8b 04 24 48 3d a0 07 7f 93 0f 84
RSP: 0018:ffffc900035d7268 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000006 RSI: 1ffff920006bae5f RDI: 0000000000000030
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
R10: ffffffff90608e17 R11: 0000000000000001 R12: 0000000000000030
R13: ffff888036334880 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555579e90380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc59cc4278 CR3: 0000000072b54000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5849
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x33/0x40 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
modify_prefix_route+0x30b/0x8b0 net/ipv6/addrconf.c:4831
inet6_addr_modify net/ipv6/addrconf.c:4923 [inline]
inet6_rtm_newaddr+0x12c7/0x1ab0 net/ipv6/addrconf.c:5055
rtnetlink_rcv_msg+0x3c7/0xea0 net/core/rtnetlink.c:6920
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2541
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
____sys_sendmsg+0xaaf/0xc90 net/socket.c:2583
___sys_sendmsg+0x135/0x1e0 net/socket.c:2637
__sys_sendmsg+0x16e/0x220 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fd1dcef8b79
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc59cc4378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd1dcef8b79
RDX: 0000000000040040 RSI: 0000000020000140 RDI: 0000000000000004
RBP: 00000000000113fd R08: 0000000000000006 R09: 0000000000000006
R10: 0000000000000006 R11: 0000000000000246 R12: 00007ffc59cc438c
R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
</TASK>
Fixes: 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.")
Reported-by: syzbot+1de74b0794c40c8eb300@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67461f7f.050a0220.1286eb.0021.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
CC: Kui-Feng Lee <thinker.li@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sasha reported a build issue in ipmr::
net/ipv4/ipmr.c:320:13: error: function 'ipmr_can_free_table' is not \
needed and will not be emitted \
[-Werror,-Wunneeded-internal-declaration]
320 | static bool ipmr_can_free_table(struct net *net)
Apparently clang is too smart with BUILD_BUG_ON_INVALID(), let's
fallback to a plain WARN_ON_ONCE().
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://qa-reports.linaro.org/lkft/sashal-linus-next/build/v6.11-25635-g6813e2326f1e/testrun/26111580/suite/build/test/clang-nightly-lkftconfig/details/
Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/ee75faa926b2446b8302ee5fc30e129d2df73b90.1732810228.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Several places call ip6mr_get_table() with no RCU nor RTNL lock.
Add RCU protection inside such helper and provide a lockless variant
for the few callers that already acquired the relevant lock.
Note that some users additionally reference the table outside the RCU
lock. That is actually safe as the table deletion can happen only
after all table accesses are completed.
Fixes: e2d57766e674 ("net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.")
Fixes: d7c31cbde4bc ("net: ip6mr: add RTM_GETROUTE netlink op")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The multicast route tables lifecycle, for both ipv4 and ipv6, is
protected by RCU using the RTNL lock for write access. In many
places a table pointer escapes the RCU (or RTNL) protected critical
section, but such scenarios are actually safe because tables are
deleted only at namespace cleanup time or just after allocation, in
case of default rule creation failure.
Tables freed at namespace cleanup time are assured to be alive for the
whole netns lifetime; tables freed just after creation time are never
exposed to other possible users.
Ensure that the free conditions are respected in ip{,6}mr_free_table, to
document the locking schema and to prevent future possible introduction
of 'table del' operation from breaking it.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RFC8981 section 3.4 says that existing temporary addresses must have their
lifetimes adjusted so that no temporary addresses should ever remain "valid"
or "preferred" longer than the incoming SLAAC Prefix Information. This would
strongly imply in Linux's case that if the "mngtmpaddr" address is deleted or
un-flagged as such, its corresponding temporary addresses must be cleared out
right away.
But now the temporary address is renewed even after ‘mngtmpaddr’ is removed
or becomes unmanaged as manage_tempaddrs() set temporary addresses
prefered/valid time to 0, and later in addrconf_verify_rtnl() all checkings
failed to remove the addresses. Fix this by deleting the temporary address
directly for these situations.
Fixes: 778964f2fdf0 ("ipv6/addrconf: fix timing bug in tempaddr regen")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement ipv6 udp hash4 like that in ipv4. The major difference is that
the hash value should be calculated with udp6_ehashfn(). Besides,
ipv4-mapped ipv6 address is handled before hash() and rehash(). Export
udp_ehashfn because now we use it in udpv6 rehash.
Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and
udpv6 share the same udptable, so some functions in ipv4 hash4 can also
be shared.
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the udp_table has two hash table, the port hash and portaddr
hash. Usually for UDP servers, all sockets have the same local port and
addr, so they are all on the same hash slot within a reuseport group.
In some applications, UDP servers use connect() to manage clients. In
particular, when firstly receiving from an unseen 4 tuple, a new socket
is created and connect()ed to the remote addr:port, and then the fd is
used exclusively by the client.
Once there are connected sks in a reuseport group, udp has to score all
sks in the same hash2 slot to find the best match. This could be
inefficient with a large number of connections, resulting in high
softirq overhead.
To solve the problem, this patch implement 4-tuple hash for connected
udp sockets. During connect(), hash4 slot is updated, as well as a
corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(),
hslot4 will be searched firstly if the counter is non-zero. Otherwise,
hslot2 is used like before. Note that only connected sockets enter this
hash4 path, while un-connected ones are not affected.
hlist_nulls is used for hash4, because we probably move to another hslot
wrongly when lookup with concurrent rehash. Then we check nulls at the
list end to see if we should restart lookup. Because udp does not use
SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Preparing for udp 4-tuple hash (uhash4 for short).
To implement uhash4 without cache line missing when lookup, hslot2 is
used to record the number of hashed sockets in hslot4. Thus adding a new
struct udp_hslot_main with field hash4_cnt, which is used by hash2. The
new struct is used to avoid doubling the size of udp_hslot.
Before uhash4 lookup, firstly checking hash4_cnt to see if there are
hashed sks in hslot4. Because hslot2 is always used in lookup, there is
no cache line miss.
Related helpers are updated, and use the helpers as possible.
uhash4 is implemented in following patches.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-11-15
1) Add support for RFC 9611 per cpu xfrm state handling.
2) Add inbound and outbound xfrm state caches to speed up
state lookups.
3) Convert xfrm to dscp_t. From Guillaume Nault.
4) Fix error handling in build_aevent.
From Everest K.C.
5) Replace strncpy with strscpy_pad in copy_to_user_auth.
From Daniel Yang.
6) Fix an uninitialized symbol during acquire state insertion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In this commit, we make ip_route_input() return skb drop reasons that come
from ip_route_input_noref().
Meanwhile, adjust all the call to it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzkaller reported this warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:inet_sock_destruct+0x1c5/0x1e0
Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00
RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206
RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007
RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00
RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007
R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00
R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78
FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x88/0x130
? inet_sock_destruct+0x1c5/0x1e0
? report_bug+0x18e/0x1a0
? handle_bug+0x53/0x90
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? inet_sock_destruct+0x1c5/0x1e0
__sk_destruct+0x2a/0x200
rcu_do_batch+0x1aa/0x530
? rcu_do_batch+0x13b/0x530
rcu_core+0x159/0x2f0
handle_softirqs+0xd3/0x2b0
? __pfx_smpboot_thread_fn+0x10/0x10
run_ksoftirqd+0x25/0x30
smpboot_thread_fn+0xdd/0x1d0
kthread+0xd3/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add()
concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked,
which triggers a data-race around sk->sk_forward_alloc:
tcp_v6_rcv
tcp_v6_do_rcv
skb_clone_and_charge_r
sk_rmem_schedule
__sk_mem_schedule
sk_forward_alloc_add()
skb_set_owner_r
sk_mem_charge
sk_forward_alloc_add()
__kfree_skb
skb_release_all
skb_release_head_state
sock_rfree
sk_mem_uncharge
sk_forward_alloc_add()
sk_mem_reclaim
// set local var reclaimable
__sk_mem_reclaim
sk_forward_alloc_add()
In this syzkaller testcase, two threads call
tcp_v6_do_rcv() with skb->truesize=768, the sk_forward_alloc changes like
this:
(cpu 1) | (cpu 2) | sk_forward_alloc
... | ... | 0
__sk_mem_schedule() | | +4096 = 4096
| __sk_mem_schedule() | +4096 = 8192
sk_mem_charge() | | -768 = 7424
| sk_mem_charge() | -768 = 6656
... | ... |
sk_mem_uncharge() | | +768 = 7424
reclaimable=7424 | |
| sk_mem_uncharge() | +768 = 8192
| reclaimable=8192 |
__sk_mem_reclaim() | | -4096 = 4096
| __sk_mem_reclaim() | -8192 = -4096 != 0
The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when
sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock().
Fix the same issue in dccp_v6_do_rcv().
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20241107023405.889239-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most of the original conversion is from the spatch below,
but I edited some and left out other instances that were
either buggy after conversion (where default values don't
fit into the type) or just looked strange.
@@
expression attr, def;
expression val;
identifier fn =~ "^nla_get_.*";
fresh identifier dfn = fn ## "_default";
@@
(
-if (attr)
- val = fn(attr);
-else
- val = def;
+val = dfn(attr, def);
|
-if (!attr)
- val = def;
-else
- val = fn(attr);
+val = dfn(attr, def);
|
-if (!attr)
- return def;
-return fn(attr);
+return dfn(attr, def);
|
-attr ? fn(attr) : def
+dfn(attr, def)
|
-!attr ? def : fn(attr)
+dfn(attr, def)
)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|