summaryrefslogtreecommitdiff
path: root/net/mac80211/agg-tx.c
AgeCommit message (Collapse)Author
2023-09-11wifi: mac80211: fix BA session teardown raceJohannes Berg
As previously reported by Alexander, whose commit 69403bad97aa ("wifi: mac80211: sdata can be NULL during AMPDU start") I'm reverting as part of this commit, there's a race between station destruction and aggregation setup, where the aggregation setup can happen while the station is being removed and queue the work after ieee80211_sta_tear_down_BA_sessions() has already run in __sta_info_destroy_part1(), and thus the worker will run with a now freed station. In his case, this manifested in a NULL sdata pointer, but really there's no guarantee whatsoever. The real issue seems to be that it's possible at all to have a situation where this occurs - we want to stop the BA sessions when doing _part1, but we cannot be sure, and WLAN_STA_BLOCK_BA isn't necessarily effective since we don't know that the setup isn't concurrently running and already got past the check. Simply call ieee80211_sta_tear_down_BA_sessions() again in the second part of station destruction, since at that point really nothing else can hold a reference to the station any more. Also revert the sdata checks since those are just misleading at this point. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove ampdu_mlme.mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the A-MPDU locking, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: convert A-MPDU work to wiphy workJohannes Berg
Convert the A-MPDU work to wiphy work so it holds the wiphy mutex and we can later guarantee that to drivers. It might seem that we could run these concurrently for different stations, but they're all on the ordered mac80211 workqueue, so this shouldn't matter for that. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: mac80211: agg-tx: prevent start/stop raceJohannes Berg
There were crashes reported in this code, and the timer_shutdown() warning in one of the previous patches indicates that the timeout timer for the AP response (addba_resp_timer) is still armed while we're stopping the aggregation session. After a very long deliberation of the code, so far the only way I could find that might cause this would be the following sequence: - session start requested - session start indicated to driver, but driver returns IEEE80211_AMPDU_TX_START_DELAY_ADDBA - session stop requested, sets HT_AGG_STATE_WANT_STOP - session stop worker runs ___ieee80211_stop_tx_ba_session(), sets HT_AGG_STATE_STOPPING From here on, the order doesn't matter exactly, but: 1. driver calls ieee80211_start_tx_ba_cb_irqsafe(), setting HT_AGG_STATE_START_CB 2. driver calls ieee80211_stop_tx_ba_cb_irqsafe(), setting HT_AGG_STATE_STOP_CB 3. the worker will run ieee80211_start_tx_ba_cb() for HT_AGG_STATE_START_CB 4. the worker will run ieee80211_stop_tx_ba_cb() for HT_AGG_STATE_STOP_CB (the order could also be 1./3./2./4.) This will cause ieee80211_start_tx_ba_cb() to send out the AddBA request frame to the AP and arm the timer, but we're already in the middle of stopping and so the ieee80211_stop_tx_ba_cb() will no longer assume it needs to stop anything. Prevent this by checking for WANT_STOP/STOPPING in the start CB, and warn if we're sending a frame on a stopping session. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.e5b52777462a.I0b2ed6658e81804279f5d7c9c1918cb1f6626bf2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: mac80211: agg-tx: add a few locking assertionsJohannes Berg
This is all true today, but difficult to understand since the callers are in other files etc. Add two new lockdep assertions to make things easier to read. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.7f03dec6a90b.I762c11e95da005b80fa0184cb1173b99ec362acf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: introduce ieee80211_refresh_tx_agg_session_timer()Ryder Lee
This allows low level drivers to refresh the tx agg session timer, based on querying stats from the firmware usually. Especially for some mt76 devices support .net_fill_forward_path would bypass mac80211, which leads to tx BA session timeout clients that set a timeout in their AddBA response to our request, even if our request is without a timeout. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/7c3f72eac1c34921cd84a462e60d71e125862152.1676616450.git.ryder.lee@mediatek.com [slightly clarify commit message, add note about RCU] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: Fix iTXQ AMPDU fragmentation handlingAlexander Wetzel
mac80211 must not enable aggregation wile transmitting a fragmented MPDU. Enforce that for mac80211 internal TX queues (iTXQs). Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202301021738.7cd3e6ae-oliver.sang@intel.com Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20230106223141.98696-1-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: sdata can be NULL during AMPDU startAlexander Wetzel
ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20221230121850.218810-2-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: transmit AddBA with MLD addressJohannes Berg
This management frame is intended for the MLD so we treat it in mac80211 as MLD addressed as well, and should therefore use the MLD address of the AP for the BSSID field in the frame, address translation applies. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: expand ieee80211_mgmt_tx() for MLOJohannes Berg
There are a couple of new things that should be possible with MLO: * selecting the link to transmit to a station by link ID, which a previous patch added to the nl80211 API * selecting the link by frequency, similarly * allowing transmittion to an MLD without specifying any channel or link ID, with MLD addresses Enable these use cases. Also fix the address comparison in client mode to use the AP (MLD) address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: reorg some iface data structs for MLDJohannes Berg
Start reorganizing interface related data structures toward MLD. The most complex part here is for the keys, since we have to split the various kinds of GTKs off to the link but still need to use (for WEP) the other keys as a fallback even for multicast frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: refuse aggregations sessions before authorizedJohannes Berg
If an MFP station isn't authorized, the receiver will (or at least should) drop the action frame since it's a robust management frame, but if we're not authorized we haven't installed keys yet. Refuse attempts to start a session as they'd just time out. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220203201528.ff4d5679dce9.I34bb1f2bc341e161af2d6faf74f91b332ba11285@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: agg-tx: don't schedule_and_wake_txq() under sta->lockJohannes Berg
When we call ieee80211_agg_start_txq(), that will in turn call schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb() this is done under sta->lock, which leads to certain circular lock dependencies, as reported by Chris Murphy: https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com In general, ieee80211_agg_start_txq() is usually not called with sta->lock held, only in this one place. But it's always called with sta->ampdu_mlme.mtx held, and that's therefore clearly sufficient. Change ieee80211_stop_tx_ba_cb() to also call it without the sta->lock held, by factoring it out of ieee80211_remove_tid_tx() (which is only called in this one place). This breaks the locking chain and makes it less likely that we'll have similar locking chain problems in the future. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: send ADDBA requests using the tid/queue of the aggregation sessionFelix Fietkau
Sending them out on a different queue can cause a race condition where a number of packets in the queue may be discarded by the receiver, because the ADDBA request is sent too early. This affects any driver with software A-MPDU setup which does not allocate packet seqno in hardware on tx, regardless of whether iTXQ is used or not. The only driver I've seen that explicitly deals with this issue internally is mwl8k. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26mac80211: fix regression in SSN handling of addba txFelix Fietkau
Some drivers that do their own sequence number allocation (e.g. ath9k) rely on being able to modify params->ssn on starting tx ampdu sessions. This was broken by a change that modified it to use sta->tid_seq[tid] instead. Cc: stable@vger.kernel.org Fixes: 31d8bb4e07f8 ("mac80211: agg-tx: refactor sending addba") Reported-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20211124094024.43222-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: use bitfield helpers for BA session action framesJohannes Berg
Use the appropriate bitfield helpers for encoding and decoding the capability field in the BA session action frames instead of open-coding the shifts/masks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.0c46e5097cc0.I06e75706770c40b9ba1cabd1f8a78ab7a05c5b73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: accept aggregation sessions on 6 GHzJohannes Berg
On 6 GHz, stations don't have ht_supported set, but they can still do aggregation since they must have HE, allow that. Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: agg-tx: add an option to defer ADDBA transmitMordechay Goodstein
Driver tells mac80211 to sends ADDBA with SSN (starting sequence number) from the head of the queue, while the transmission of all the frames in the queue may take a while, which causes the peer to time out. In order to fix this scenario, add an option to defer ADDBA transmit until queue is drained. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.0f27423fec75.If67daab123a27c1cbddef000d6a3f212aa6309ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: agg-tx: refactor sending addbaMordechay Goodstein
We move the actual arming the timer and sending ADDBA to a function for the use in different places calling the same logic. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.58a337eb90a1.I75934e6464535fbf43969acc796bc886291e79a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-04mac80211: simplify TX aggregation startJohannes Berg
There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11mac80211: Fix Tx aggregation session tear down with ITXQsIlan Peer
When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19mac80211: Add TXQ scheduling APIToke Høiland-Jørgensen
This adds an API to mac80211 to handle scheduling of TXQs. The interface between driver and mac80211 for TXQ handling is changed by adding two new functions: ieee80211_next_txq(), which will return the next TXQ to schedule in the current round-robin rotation, and ieee80211_return_txq(), which the driver uses to indicate that it has finished scheduling a TXQ (which will then be put back in the scheduling rotation if it isn't empty). The driver must call ieee80211_txq_schedule_start() at the start of each scheduling session, and ieee80211_txq_schedule_end() at the end. The API then guarantees that the same TXQ is not returned twice in the same session (so a driver can loop on ieee80211_next_txq() without worrying about breaking the loop. Usage of the new API is optional, so drivers can be ported one at a time. In this patch, the actual scheduling performed by mac80211 is simple round-robin, but a subsequent commit adds airtime fairness awareness to the scheduler. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> [minor kernel-doc fix, propagate sparse locking checks out] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-18mac80211: add support for HELuca Coelho
Add support for HE in mac80211 conforming with P802.11ax_D1.4. Johannes: Fix another bug with the buf_size comparison in agg-rx.c. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-18ieee80211: bump IEEE80211_MAX_AMPDU_BUF to support HEJohannes Berg
Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere. This is derived from my internal patch, parts of which Luca had sent upstream. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-07mac80211: use timeout from the AddBA response instead of the requestSara Sharon
2016 spec, section 10.24.2 specifies that the block ack timeout in the ADD BA request is advisory. That means we should check the value in the response and act upon it (same as buffer size). Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19Revert "mac80211: Add TXQ scheduling API"Johannes Berg
This reverts commit e937b8da5a591f141fe41aa48a2e898df9888c95. Turns out that a new driver (mt76) is coming in through Kalle's tree, and will conflict with this. It also has some conflicting requirements, so we'll revisit this later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: Add TXQ scheduling APIToke Høiland-Jørgensen
This adds an API to mac80211 to handle scheduling of TXQs and changes the interface between driver and mac80211 for TXQ handling as follows: - The wake_tx_queue callback interface no longer includes the TXQ. Instead, the driver is expected to retrieve that from ieee80211_next_txq() - Two new mac80211 functions are added: ieee80211_next_txq() and ieee80211_schedule_txq(). The former returns the next TXQ that should be scheduled, and is how the driver gets a queue to pull packets from. The latter is called internally by mac80211 to start scheduling a queue, and the driver is supposed to call it to re-schedule the TXQ after it is finished pulling packets from it (unless the queue emptied). The ath9k and ath10k drivers are changed to use the new API. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: call synchronize_net once in the restart flowSara Sharon
Currently the restart flow enables RX back, and then proceeds to tear down RX and TX aggregations. The TX aggregation tear down calls synchronize_net(), which waits for packet receiving to be done. This is done for every session, while RX processing is already active, and in some reproductions it takes up to 3 seconds. Add a call once in the restart_work, before we have traffic active again, and remove the subsequent calls when tearing down the aggregation. This requires to move down the code that turns off the reconfig flag in order to be able to test it in _ieee80211_stop_tx_ba_session(). Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: avoid looking up tid_tx/tid_rx from timersJohannes Berg
There's no need to re-lookup the data structures now that we actually get them immediately with from_timer(), just avoid that. The struct has to be valid anyway, otherwise the timer object itself would no longer be valid, and we can't have a different version of the struct since only a single session per TID is permitted. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211: properly free requested-but-not-started TX agg sessionsJohannes Berg
When deleting a station or otherwise tearing down all aggregation sessions, make sure to delete requested but not yet started ones, to avoid the following scenario: * session is requested, added to tid_start_tx[] * ieee80211_ba_session_work() runs, gets past BLOCK_BA check * ieee80211_sta_tear_down_BA_sessions() runs, locks &sta->ampdu_mlme.mtx, e.g. while deleting the station - deleting all active sessions * ieee80211_ba_session_work() continues since tear down flushes it, and calls ieee80211_tx_ba_session_handle_start() for the new session, arms the timer for it * station deletion continues to __cleanup_single_sta() and frees the session struct, while the timer is armed Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211: aggregation: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This removes the tid mapping array and expands the tid structures to add a pointer back to the station, along with the tid index itself. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> [switch tid variables to u8, the valid range is 0-15 at most, initialize tid_tx->sta/tid properly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: agg-tx: call drv_wake_tx_queue in proper contextJohannes Berg
Since drv_wake_tx_queue() is normally called in the TX path, which is already in an RCU critical section, we should call it the same way in the aggregation code path, so if the driver expects to be able to use RCU, it'll already be protected without having to enter a nested critical section. Additionally, disable soft-IRQs, since not doing so could cause issues in a driver that relies on them already being disabled like in the other path. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: shorten debug prints using ht_dbg() to avoid warningSharon Dvir
Invoking ht_dbg() with too long of a string will print a warning. Shorten the messages while retaining the printed patameters. Signed-off-by: Sharon Dvir <sharon.dvir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30mac80211: fix TX aggregation start/stop callback raceJohannes Berg
When starting or stopping an aggregation session, one of the steps is that the driver calls back to mac80211 that the start/stop can proceed. This is handled by queueing up a fake SKB and processing it from the normal iface/sdata work. Since this isn't flushed when disassociating, the following race is possible: * associate * start aggregation session * driver callback * disassociate * associate again to the same AP * callback processing runs, leading to a WARN_ON() that the TID hadn't requested aggregation If the second association isn't to the same AP, there would only be a message printed ("Could not find station: <addr>"), but the same race could happen. Fix this by not going the whole detour with a fake SKB etc. but simply looking up the aggregation session in the driver callback, marking it with a START_CB/STOP_CB bit and then scheduling the regular aggregation work that will now process these bits as well. This also simplifies the code and gets rid of the whole problem with allocation failures of said skb, which could have left the session in limbo. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06mac80211: Use setup_timer instead of init_timerOndřej Lysoněk
Use setup_timer() and setup_deferrable_timer() to set the data and function timer fields. It makes the code cleaner and will allow for easier change of the timer struct internals. Signed-off-by: Ondřej Lysoněk <ondrej.lysonek@seznam.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: <linux-wireless@vger.kernel.org> Cc: <netdev@vger.kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-15mac80211: reject TSPEC TIDs (TSIDs) for aggregationJohannes Berg
Since mac80211 doesn't currently support TSIDs 8-15 which can only be used after QoS TSPEC negotiation (and not even after WMM negotiation), reject attempts to set up aggregation sessions for them, which might confuse drivers. In mac80211 we do correctly handle that, but the TSIDs should never get used anyway, and drivers might not be able to handle it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-09mac80211: implement fair queueing per txqMichal Kazior
mac80211's software queues were designed to work very closely with device tx queues. They are required to make use of 802.11 packet aggregation easily and efficiently. Due to the way 802.11 aggregation is designed it only makes sense to keep fair queuing as close to hardware as possible to reduce induced latency and inertia and provide the best flow responsiveness. This change doesn't translate directly to immediate and significant gains. End result depends on driver's induced latency. Best results can be achieved if driver keeps its own tx queue/fifo fill level to a minimum. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add A-MSDU tx supportFelix Fietkau
Requires software tx queueing and fast-xmit support. For good performance, drivers need frag_list support as well. This avoids the need for copying data of aggregated frames. Running without it is only supported for debugging purposes. To avoid performance and packet size issues, the rate control module or driver needs to limit the maximum A-MSDU size by setting max_rc_amsdu_len in struct ieee80211_sta. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix locking issue] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: pass block ack session timeout to to driverSara Sharon
Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-20mac80211: always set the buf_size in AddBA req to 64Gregory Greenman
Advertising reordering window in ADDBA less than 64 can crash some APs, an example is LinkSys WRT120N (with FW v1.0.07 build 002 Jun 18 2012). On the other hand, a driver may need to limit Tx A-MPDU size for its own reasons, like specific HW limitations. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: add an intermediate software queue implementationFelix Fietkau
This allows drivers to request per-vif and per-sta-tid queues from which they can pull frames. This makes it easier to keep the hardware queues short, and to improve fairness between clients and vifs. The task of scheduling packet transmission is left up to the driver - queueing is controlled by mac80211. Drivers can only dequeue packets by calling ieee80211_tx_dequeue. This makes it possible to add active queue management later without changing drivers using this code. This can also be used as a starting point to implement A-MSDU aggregation in a way that does not add artificially induced latency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [resolved minor context conflict, minor changes, endian annotations] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: reject aggregation sessions with non-HT peersJohannes Berg
If a peer or some local agent (rate control, ...) decides to start an aggregation session but doesn't support HT (which also implies QoS), reject it. This is mostly a corner case as such peers normally won't try to use block-ack sessions and rate control wouldn't start them, but technically QoS stations could request it according to the spec. However, since drivers don't really support such non-HT sessions it's better to reject them. Also, while at it, move the tracing for TX sessions earlier so it captures the error cases as well. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: agg-tx: avoid sending DelBA with sta->lock heldJohannes Berg
The rate control locking caused a potential deadlock here due to the locks being acquired in different orders, so that change cannot yet be applied. However, there's no fundamental reason for this code to hold the sta->lock while transmitting frames. Clearly it's better not to hold the lock for longer periods of time, which can happen here since we call all the way down to the driver. Change the code a bit to not hold it while doing that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: synchronously reserve TID per stationLiad Kaufman
In TDLS (e.g., TDLS off-channel) there is a requirement for some drivers to supply an unused TID between the AP and the device to the FW, to allow sending PTI requests and to allow the FW to aggregate on a specific TID for better throughput. To ensure that the allocated TID is indeed unused, this patch introduces an API for blocking the driver from TXing on that TID. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2024-05-18 11:04:30 +0000