summaryrefslogtreecommitdiff
path: root/net/mac80211/key.c
AgeCommit message (Collapse)Author
2016-12-13mac80211: don't call drv_set_default_unicast_key() for VLANsJohannes Berg
Since drivers know nothing about AP_VLAN interfaces, trying to call drv_set_default_unicast_key() just results in a warning and no call to the driver. Avoid the warning by not calling the driver for this on AP_VLAN interfaces. This means that drivers that somehow need this call for AP mode will fail to work properly in the presence of VLAN interfaces, but the current drivers don't seem to use it, and mac80211 will select and indicate the key - so drivers should be OK now. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add fast-rx pathJohannes Berg
The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: remove ieee80211_get_key_tx_seq/ieee80211_set_key_tx_seqEliad Peller
Since the PNs of all the tx keys are now tracked in the public part of the key struct (with atomic counter), we no longer need these functions. dvm and vt665{5,6} are currently the only users of these functions, so update them accordingly. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: move TKIP TX IVs to public part of key structEliad Peller
Some drivers/devices might want to set the IVs by themselves (and still let mac80211 generate MMIC). Specifically, this is needed when the device does offloading at certain times, and the driver has to make sure that the IVs of new tx frames (from the host) are synchronized with IVs that were potentially used during the offloading. Similarly to CCMP, move the TX IVs of TKIP keys to the public part of the key struct, and export a function to add the IV right into the crypto header. The public tx_pn field is defined as atomic64, so define TKIP_PN_TO_IV16/32 helper macros to convert it to iv16/32 when needed. Since the iv32 used for the p1k cache is taken directly from the frame, we can safely remove iv16/32 from being protected by tkip.txlock. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04mac80211: add atomic uploaded keys iteratorEliad Peller
add ieee80211_iter_keys_rcu() to iterate over uploaded keys in atomic context (when rcu is locked) The station removal code removes the keys only after calling synchronize_net(), so it's not safe to iterate the keys at this point (and postponing the actual key deletion with call_rcu() might result in some badly-ordered ops calls). Add a flag to indicate a station is being removed, and skip the configured keys if it's set. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: remove sta_info.gtk_idxJohannes Berg
This struct member is only assigned, never used otherwise; remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mellanox/mlx4/main.c net/packet/af_packet.c Both conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21mac80211: fix locking in update_vlan_tailroom_need_count()Johannes Berg
Unfortunately, Michal's change to fix AP_VLAN crypto tailroom caused a locking issue that was reported by lockdep, but only in a few cases - the issue was a classic ABBA deadlock caused by taking the mtx after the key_mtx, where normally they're taken the other way around. As the key mutex protects the field in question (I'm adding a few annotations to make that clear) only the iteration needs to be protected, but we can also iterate the interface list with just RCU protection while holding the key mutex. Fixes: f9dca80b98ca ("mac80211: fix AP_VLAN crypto tailroom calculation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merge back net-next to get wireless driver changes (from Kalle) to be able to create the API change across all trees properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02mac80211: move TX PN to public part of key structJohannes Berg
For drivers supporting TSO or similar features, but that still have PN assignment in software, there's a need to have some memory to store the current PN value. As mac80211 already stores this and it's somewhat complicated to add a per-driver area to the key struct (due to the dynamic sizing thereof) it makes sense to just move the TX PN to the keyconf, i.e. the public part of the key struct. As TKIP is more complicated and we won't able to offload it in this way right now (fast-xmit is skipped for TKIP unless the HW does it all, and our hardware needs MMIC calculation in software) I've not moved that for now - it's possible but requires exposing a lot of the internal TKIP state. As an bonus side effect, we can remove a lot of code by assuming the keyseq struct has a certain layout - with BUILD_BUG_ON to verify it. This might also improve performance, since now TX and RX no longer share a cacheline. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-20mac80211: fix AP_VLAN crypto tailroom calculationMichal Kazior
Some splats I was seeing: (a) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wep.c:102 ieee80211_wep_add_iv (b) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:73 ieee80211_tx_h_michael_mic_add (c) WARNING: CPU: 3 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:433 ieee80211_crypto_ccmp_encrypt I've seen (a) and (b) with ath9k hw crypto and (c) with ath9k sw crypto. All of them were related to insufficient skb tailroom and I was able to trigger these with ping6 program. AP_VLANs may inherit crypto keys from parent AP. This wasn't considered and yielded problems in some setups resulting in inability to transmit data because mac80211 wouldn't resize skbs when necessary and subsequently drop some packets due to insufficient tailroom. For efficiency purposes don't inspect both AP_VLAN and AP sdata looking for tailroom counter. Instead update AP_VLAN tailroom counters whenever their master AP tailroom counter changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06mac80211: validate cipher scheme PN length betterJohannes Berg
Currently, a cipher scheme can advertise an arbitrarily long sequence counter, but mac80211 only supports up to 16 bytes and the initial value from userspace will be truncated. Fix two things: * don't allow the driver to register anything longer than the 16 bytes that mac80211 reserves space for * require userspace to specify a starting value with the correct length (or none at all) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06mac80211: extend get_key() to return PN for all ciphersJohannes Berg
For ciphers not supported by mac80211, the function currently doesn't return any PN data. Fix this by extending the driver's get_key_seq() a little more to allow moving arbitrary PN data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22mac80211: add TX fastpathJohannes Berg
In order to speed up mac80211's TX path, add the "fast-xmit" cache that will cache the data frame 802.11 header and other data to be able to build the frame more quickly. This cache is rebuilt when external triggers imply changes, but a lot of the checks done per packet today are simplified away to the check for the cache. There's also a more detailed description in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-17mac80211: Get IV len from key conf and not cipher schemeCedric Izoard
When a key is installed using a cipher scheme, set a new internal key flag (KEY_FLAG_CIPHER_SCHEME) on it, to allow distinguishing such keys more easily. In particular, use this flag on the TX path instead of testing the sta->cipher_scheme pointer, as the station is NULL for broad-/multicast message, and use the key's iv_len instead of the cipher scheme information. Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com> [add missing documentation, rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27mac80111: Add BIP-GMAC-128 and BIP-GMAC-256 ciphersJouni Malinen
This allows mac80211 to configure BIP-GMAC-128 and BIP-GMAC-256 to the driver and also use software-implementation within mac80211 when the driver does not support this with hardware accelaration. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27mac80111: Add BIP-CMAC-256 cipherJouni Malinen
This allows mac80211 to configure BIP-CMAC-256 to the driver and also use software-implementation within mac80211 when the driver does not support this with hardware accelaration. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27mac80111: Add CCMP-256 cipherJouni Malinen
This allows mac80211 to configure CCMP-256 to the driver and also use software-implementation within mac80211 when the driver does not support this with hardware accelaration. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [squash ccmp256 -> mic_len argument change] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27mac80111: Add GCMP and GCMP-256 ciphersJouni Malinen
This allows mac80211 to configure GCMP and GCMP-256 to the driver and also use software-implementation within mac80211 when the driver does not support this with hardware accelaration. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [remove a spurious newline] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-22mac80211: allow drivers to control software cryptoJohannes Berg
Some drivers unfortunately cannot support software crypto, but mac80211 currently assumes that they do. This has the issue that if the hardware enabling fails for some reason, the software fallback is used, which won't work. This clearly isn't desirable, the error should be reported and the key setting refused. Support this in mac80211 by allowing drivers to set a new HW flag IEEE80211_HW_SW_CRYPTO_CONTROL, in which case mac80211 will only allow software fallback if the set_key() method returns 1. The driver will also need to advertise supported cipher suites so that mac80211 doesn't advertise any (future) software ciphers that the driver can't actually do. While at it, to make it easier to support this, refactor the ieee80211_init_cipher_suites() code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-07mac80211: Re-fix accounting of the tailroom-needed counterIdo Yariv
When hw acceleration is enabled, the GENERATE_IV or PUT_IV_SPACE flags only require headroom space. Therefore, the tailroom-needed counter can safely be decremented for most drivers. The older incarnation of this patch (ca34e3b5) assumed that the above holds true for all drivers. As reported by Christopher Chavez and researched by Christian Lamparter and Larry Finger, this isn't a valid assumption for p54 and cw1200. Drivers that still require tailroom for ICV/MIC even when HW encryption is enabled can use IEEE80211_KEY_FLAG_RESERVE_TAILROOM to indicate it. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Cc: Christopher Chavez <chrischavez@gmx.us> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-05Revert "mac80211: Fix accounting of the tailroom-needed counter"Johannes Berg
This reverts commit ca34e3b5c808385b175650605faa29e71e91991b. It turns out that the p54 and cw2100 drivers assume that there's tailroom even when they don't say they really need it. However, there's currently no way for them to explicitly say they do need it, so for now revert this. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=90331. Cc: stable@vger.kernel.org Fixes: ca34e3b5c808 ("mac80211: Fix accounting of the tailroom-needed counter") Reported-by: Christopher Chavez <chrischavez@gmx.us> Bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Debugged-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-17mac80211: free management frame keys when removing stationJohannes Berg
When writing the code to allow per-station GTKs, I neglected to take into account the management frame keys (index 4 and 5) when freeing the station and only added code to free the first four data frame keys. Fix this by iterating the array of keys over the right length. Cc: stable@vger.kernel.org Fixes: e31b82136d1a ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22mac80211: don't remove tainted keys after not programmingJohannes Berg
When a key is tainted during resume, it is no longer programmed into the device; however, it's uploaded flag may (will) be set. Clear the flag when not programming it because it's tainted to avoid attempting to remove it again later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11mac80211: clear key material when freeing keysJohannes Berg
When freeing the key, clear the memory to avoid having the key material stick around in memory "forever". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05mac80211: add Intel Mobile Communications copyrightJohannes Berg
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26mac80211: Fix accounting of the tailroom-needed counterIdo Yariv
When hw acceleration is enabled, the GENERATE_IV or PUT_IV_SPACE flags will only require headroom space. Consequently, the tailroom-needed counter can safely be decremented. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: remove useless NULL checksEytan Lifshitz
sdata can't be NULL, and key being NULL is really not possible unless the code is modified. The sdata check made a static analyze (klocwork) unhappy because we would get pointer to local (sdata->local) and only then check if sdata is non-NULL. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [remove !key check as well] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-29mac80211: remove BUG_ON usageJohannes Berg
These BUG_ON statements should never trigger, but in the unlikely event that somebody does manage don't stop everything but simply exit the code path with an error. Leave the one BUG_ON where changing it would result in a NULL pointer dereference. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: free all AP/VLAN keys at onceJohannes Berg
When the AP interface is stopped, free all AP and VLAN keys at once to only require synchronize_net() once. Since that does synchronize_net(), also move two such calls into the function (using the new force_synchronize parameter) to avoid doing it twice. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: move synchronize_net() before sta key removalJohannes Berg
There's no reason to do this inside the sta key removal since the keys can only be reached through the sta (and not by the driver at all) so once the sta can no longer be reached, the keys are safe. This will allow further optimisation opportunities with multiple stations. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: add generic cipher scheme supportMax Stepanov
This adds generic cipher scheme support to mac80211, such schemes are fully under control by the driver. On hw registration drivers may specify additional HW ciphers with a scheme how these ciphers have to be handled by mac80211 TX/RR. A cipher scheme specifies a cipher suite value, a size of the security header to be added to or stripped from frames and how the PN is to be verified on RX. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: verify ieee80211_key_replace() argumentsJohannes Berg
There's no code calling ieee80211_key_replace() with both arguments NULL and it wouldn't make sense, but in the interest of maintainability add a warning for it. As a side effect, this also shuts up a smatch warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: use ERR_CAST()Johannes Berg
No need for ERR_PTR(PTR_ERR()) since there's ERR_CAST, use it. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16mac80211: add APIs to allow keeping connections after WoWLANJohannes Berg
In order to be able to (securely) keep connections alive after the system was suspended for WoWLAN, we need some additional APIs. We already have API (ieee80211_gtk_rekey_notify) to tell wpa_supplicant about the new replay counter if GTK rekeying was done by the device while the host was asleep, but that's not sufficient. If GTK rekeying wasn't done, we need to tell the host about sequence counters for the GTK (and PTK regardless of rekeying) that was used while asleep, add ieee80211_set_key_rx_seq() for that. If GTK rekeying was done, then we need to be able to disable the old keys (with ieee80211_remove_key()) and allocate the new GTK key(s) in mac80211 (with ieee80211_gtk_rekey_add()). If protocol offload (e.g. ARP) is implemented, then also the TX sequence counter for the PTK must be updated, using the new ieee80211_set_key_tx_seq() function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16wireless: move crypto constants to ieee80211.hJohannes Berg
mac80211 and the Intel drivers all define crypto constants, move them to ieee80211.h instead. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-11mac80211: batch key free synchronize_net()Johannes Berg
Instead of calling synchronize_net() for every key on an interface or when a station is removed, do it only once for all keys in both of these cases. As a side-effect, removing station keys now always calls synchronize_net() even if there are no keys, which fixes an issue with station removal happening in the driver while the station could still be used for TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-11mac80211: remove underscores from some key functionsJohannes Berg
Some key function don't exist without underscores, so remove the underscores from those. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-11mac80211: clean up key freeing a bitJohannes Berg
When a key is allocated but not really added, there's no need to go through the entire teardown process. Also, if adding a key fails, ieee80211_key_link() can take care of freeing it instead of the (only) caller. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: defer tailroom counter manipulation when roamingJohannes Berg
During roaming, the crypto_tx_tailroom_needed_cnt counter will often take values 2,1,0,1,2 because first keys are removed and then new keys are added. This is inefficient because during the 0->1 transition, synchronize_net must be called to avoid packet races, although typically no packets would be flowing during that time. To avoid that, defer the decrement (2->1, 1->0) when keys are removed (by half a second). This means the counter will really have the values 2,2,2,3,4 ... 2, thus never reaching 0 and having to do the 0->1 transition. Note that this patch entirely disregards the drivers for which this optimisation was done to start with, for them the key removal itself will be expensive because it has to synchronize_net() after the counter is incremented to remove the key from HW crypto. For them the sequence will look like this: 0,1,0,1,0,1,0,1,0 (*) which is clearly a lot more inefficient. This could be addressed separately, during key removal the 0->1->0 sequence isn't necessary. (*) it starts at 0 because HW crypto is on, then goes to 1 when HW crypto is disabled for a key, then back to 0 because the key is deleted; this happens for both keys in the example. When new keys are added, it goes to 1 first because they're added in software; when a key is moved to hardware it goes back to 0 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: remove IEEE80211_KEY_FLAG_WMM_STAJohannes Berg
There's no driver using this flag, so it seems that all drivers support HW crypto with WMM or don't support it at all. Remove the flag and code setting it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: cleanup generic suspend/resume proceduresStanislaw Gruszka
Since now we disconnect before suspend, various code which save connection state can now be removed from suspend and resume procedure. Cleanup on resume side is smaller as ieee80211_reconfig() is also used for H/W restart. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-18mac80211: add op to configure default key idYoni Divinsky
There are hardwares which support offload of data packets for example when auto ARP is enabled the hw will send the ARP response. In such cases if WEP encryption is configured the hw must know the default WEP key in order to encrypt the packets correctly. When hw_accel is enabled and encryption type is set to WEP, the driver should get the default key index from mac80211. Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> [cleanups, fixes, documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19mac80211: introduce IEEE80211_NUM_TIDS and use itJohannes Berg
Introduce IEEE80211_NUM_TIDS in the generic 802.11 header file and use it in place of STA_TID_NUM and NUM_RX_DATA_QUEUES which are both really the number of TIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19mac80211: use CMAC_PN_LENJohannes Berg
Instead of hardcoding its value (6), use the constant. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06mac80211: use synchronize_net() on key destroyingEliad Peller
__ieee80211_key_destroy() calls synchronize_rcu() in order to sync the tx path before destroying the key. However, synching the tx path can be done with synchronize_net() as well, which is usually faster (the timing might be important for roaming scenarios). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09mac80211: remove ieee80211_key_removedJohannes Berg
This API call was intended to be used by drivers if they want to optimize key handling by removing one key when another is added. Remove it since no driver is using it. If needed, it can always be added back. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-24mac80211: clean up debuggingJohannes Berg
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>