summaryrefslogtreecommitdiff
path: root/net/mac80211/rate.h
AgeCommit message (Collapse)Author
2017-04-28mac80211: make rate control tx status API more extensibleFelix Fietkau
Rename .tx_status_noskb to .tx_status_ext and pass a new on-stack struct ieee80211_tx_status instead of struct ieee80211_tx_info. This struct can be used to pass extra information, e.g. for dynamic tx power control Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08mac80211: reject/clear user rate mask if not usableJohannes Berg
If the user rate mask results in no (basic) rates being usable, clear it. Also, if we're already operating when it's set, reject it instead. Technically, selecting basic rates as the criterion is a bit too restrictive, but calculating the usable rates over all stations (e.g. in AP mode) is harder, and all stations must support the basic rates. Similarly, in client mode, the basic rates will be used anyway for control frames. This fixes the "no supported rates (...) in rate_mask ..." warning that occurs on TX when you've selected a rate mask that's not compatible with the connection (e.g. an AP that enables only the rates 36, 48, 54 and you've selected only 6, 9, 12.) Reported-by: Kirtika Ruchandani <kirtika@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06mac80211: remove local pointer from rate_ctrl_refJohannes Berg
This pointer really isn't needed, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: remove sta_info debugfs sub-structJohannes Berg
Since the previous patch, the struct only has a single member, so remove the struct and leave just the single member. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: deinline rate_control_rate_init, rate_control_rate_updateDenys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config, after deinlining these functions have sizes and callsite counts as follows: rate_control_rate_init: 554 bytes, 8 calls rate_control_rate_update: 1596 bytes, 5 calls Total size reduction: about 11 kbytes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: John Linville <linville@tuxdriver.com> CC: Michal Kazior <michal.kazior@tieto.com> CC: Johannes Berg <johannes.berg@intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-20mac80211: lock rate controlJohannes Berg
Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate control aren't properly taking concurrency into account. It's likely that the same is true for other rate control algorithms. In the case of minstrel this manifests itself in crashes when an update and other data access are run concurrently, for example when the stations change bandwidth or similar. In iwlwifi, this can cause firmware crashes. Since fixing all rate control algorithms will be very difficult, just provide locking for invocations. This protects the internal data structures the algorithms maintain. I've manipulated hostapd to test this, by having it change its advertised bandwidth roughly ever 150ms. At the same time, I'm running a flood ping between the client and the AP, which causes this race of update vs. get_rate/status to easily happen on the client. With this change, the system survives this test. Reported-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: add ieee80211_tx_status_noskbFelix Fietkau
This can be used by drivers that cannot reliably map tx status information onto specific skbs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: add tx_status_noskb to rate_control_opsFelix Fietkau
This op works like .tx_status, except it does not need access to the skb. This will be used by drivers that cannot match tx status information to specific packets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: remove PID rate controlJohn W. Linville
Minstrel has long since proven its worth. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: make rate control ops constJohannes Berg
Change the code to allow making all the rate control ops const, nothing ever needs to change them. Also change all drivers to make use of this and mark the ops const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-02mac80211: fix rx_nss calculation for drivers with hw rcMichal Kazior
Drivers with hardware rate control were given sta->rx_nss set to 0. This was because rx_nss calculation procedure was protected by hw/sw rate control check. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-19net: misc: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16mac80211/rc80211: add chandef to rate initializationSimon Wunderlich
5 and 10 MHz support needs to know the current operating channel width, add the chandef to the rate control API. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-02-15mac80211: track number of spatial streamsJohannes Berg
With VHT, a station can change the number of spatial streams it can receive on the fly, not unlike spatial multiplexing in HT. Prepare for that by tracking the maximum number of spatial streams it can receive when the connection is established. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: convert to channel definition structJohannes Berg
Convert mac80211 (and where necessary, some drivers a little bit) to the new channel definition struct. This will allow extending mac80211 for VHT, which is currently restricted to channel contexts since there are no drivers using that which makes it easier. As I also don't care about VHT for drivers not using the channel context API, I won't convert the previous API to VHT support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: use channel contextsJohannes Berg
Instead of operating on a single channel only, use the new channel context infrastructure in all mac80211 code. This enables drivers that want to use the new channel context infrastructure to use multiple channels, while nothing should change for all the other drivers that don't support it. Right now this disables both TX power settings and spatial multiplexing powersave. Both need to be re-enabled on a channel context basis. Additionally, when channel contexts are used drop the connection when channel switch is received rather than trying to handle it. This will have to be improved later. [With fixes from Eliad and Emmanuel incorporated] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use oper_channel in rate initJohannes Berg
Using hw.conf.channel is wrong as it could be the temporary channel if the station is added from the workqueue while the device is already on another channel. Use oper_channel instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-04-10mac80211: notify driver of rate control updatesJohannes Berg
Devices that have internal rate control need to be notified when the bandwidth or SMPS state changes just like external rate control algorithms get a notification now. Add this notification and clarify the change bits while at it, the HT_CHANGED bit really meant only bandwidth changed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove channel type argument from rate_updateJohannes Berg
The channel type argument to the rate_update() callback isn't really the correct way to give the rate control algorithm about the desired RX bandwidth of the peer. Remove this argument, and instead update the STA capabilities with 20/40 appropriately. The SMPS update done by this callback works in the same way, so this makes the callback cleaner. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08mac80211: do not call rate control .tx_status before .rate_initFelix Fietkau
Most rate control implementations assume .get_rate and .tx_status are only called once the per-station data has been fully initialized. minstrel_ht crashes if this assumption is violated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: call rate control only after initJohannes Berg
There are situations where we don't have the necessary rate control information yet for station entries, e.g. when associating. This currently doesn't really happen due to the dummy station handling; explicitly disabling rate control when it's not initialised will allow us to remove dummy stations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mac80211: clean up rate control codeJohannes Berg
It seems exceedingly unlikely that we'll ever support swapping rate control algorithms at runtime, so remove the unused refcounting code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02mac80211: add the minstrel_ht rate control algorithmFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-03mac80211: Fix HT rate control configurationSujith
Handling HT configuration changes involved setting the channel with the new HT parameters and then issuing a rate_update() notification to the driver. This behavior changed after the off-channel changes. Now, the channel is not updated with the new HT params in enable_ht() - instead, it is now done when the scan work terminates. This results in the driver depending on stale information, defaulting to non-HT mode always. Fix this by passing the new channel type to the driver. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08mac80211: make rate_control_alloc staticAndres Salomon
rate_control_alloc is not used by anything outside of ieee80211_init_rate_ctrl_alg. Both are in rate.c; there's no reason to make rate_control_alloc visible outside of it. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01mac80211: Don't call rate control when HW handles itVasanthakumar
Rate control should not be called to update the tx status when HW does the RC. Signed-off-by: Vasanthakumar <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12cfg80211/mac80211: Use more generic bitrate mask for rate controlJouni Malinen
Extend struct cfg80211_bitrate_mask to actually use a bitfield mask instead of just a single fixed or maximum rate index. This change itself does not modify the behavior (except for debugfs files), but it prepares cfg80211 and mac80211 for a new nl80211 command for setting which rates can be used in TX rate control. Since frames are now going through the rate control algorithm unconditionally, the internal IEEE80211_TX_INTFL_RCALGO flag can now be removed. The RC implementations can use the rate_idx_mask value to optimize their behavior if only a single rate is enabled. The old max_rate_idx in struct ieee80211_tx_rate_control is maintained (but commented as deprecated) for backwards compatibility with existing RC implementations. Once these implementations have been updated to use the more generic rate_idx_mask, the max_rate_idx value can be removed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18mac80211: make software rate control optionalJohannes Berg
Some devices implement the entire rate control in firmware in some way, like wl1271 or like iwlwifi which does some things in software but not a lot. Therefore generic software rate control is rather useless for them and just adds avoidable overhead to the transmit path. It's fairly simple to let drivers indicate that they do not need rate control, but they need to fulfil a number of conditions that we encode in WARN_ONs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rate control status only for controlled packetsJohannes Berg
This patch changes mac80211 to not notify the rate control algorithm's tx_status() method when reporting status for a packet that didn't go through the rate control algorithm's get_rate() method. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Extend the rate control API with an update callbackSujith
The AP can switch dynamically between 20/40 Mhz channel width, in which case we switch the local operating channel, but the rate control algorithm is not notified. This patch adds a new callback to indicate such changes to the RC algorithm. Currently, HT channel width change is notified, but this callback can be used to indicate any new requirements that might come up later on. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: remove rate_control_clearJohannes Berg
"Clearing" the rate control algorithm is pointless, none of the algorithms actually uses this operation and it's not even invoked properly for all channel switching. Also, there's no need to since rate control algorithms work per station. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211/drivers: rewrite the rate control APIJohannes Berg
So after the previous changes we were still unhappy with how convoluted the API is and decided to make things simpler for everybody. This completely changes the rate control API, now taking into account 802.11n with MCS rates and more control, most drivers don't support that though. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-06mac80211: add the 'minstrel' rate control algorithmFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24mac80211: clean up rate control APIJohannes Berg
Long awaited, hard work. This patch totally cleans up the rate control API to remove the requirement to include internal headers outside of net/mac80211/. There's one internal use in the PID algorithm left for mesh networking, we'll have to figure out a way to clean that one up and decide how to do the peer link evaluation, possibly independent of the rate control algorithm or via new API. Additionally, ath9k is left using the cross-inclusion hack for now, we will add new API where necessary to make this work properly, but right now I'm not expert enough to do it. It's still off better than before. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211: share sta->supp_ratesJohannes Berg
As more preparation for a saner rate control algorithm API, share the supported rates bitmap in the public API. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-30build algorithms into the mac80211 moduleAdrian Bunk
The old infrastructure was: - the default algorithm is built into mac80211 - other algorithms get into their own modules The implementation of this complicated scheme was horrible (just look at net/mac80211/Makefile), and anyone adding a new algorithm would most likely not get it right at his first attempt. This patch therefore builds all enabled algorithms into the mac80211 module. The user interface for the rate control algorithms changes as follows: - first the user can choose which algorithms to enable (currently only MAC80211_RC_PID is available) - if more than one algorithm is enabled (currently not possible since only one algorithm is present) the user then chooses the default one Note: - MAC80211_RC_PID is always enables for CONFIG_EMBEDDED=n Technical changes: - all selected algorithms get into the mac80211 module - net/mac80211/Makefile can now become much less complicated - support for rc80211_pid_algo.c being modular is no longer required - this includes unexporting mesh_plink_broken Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: move TX info into skb->cbJohannes Berg
This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: use rate index in TX controlJohannes Berg
This patch modifies struct ieee80211_tx_control to give band info and the rate index (instead of rate pointers) to drivers. This mostly serves to reduce the TX control structure size to make it fit into skb->cb so that the fragmentation code can put it there and we can think about passing it to drivers that way in the future. The rt2x00 driver update was done by Ivo, thanks. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: rename filesJohannes Berg
This patch renames all mac80211 files (except ieee80211_i.h) to get rid of the useless ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>