summaryrefslogtreecommitdiff
path: root/net/mac80211/rc80211_minstrel_ht.c
AgeCommit message (Collapse)Author
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: minstrel_ht: set A-MSDU tx limits based on selected max_prob_rateFelix Fietkau
Prevents excessive A-MSDU aggregation at low data rates or bad conditions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: minstrel_ht: improve sample rate skip logicFelix Fietkau
There were a few issues that were slowing down the process of finding the optimal rate, especially on devices with multi-rate retry limitations: When max_tp_rate[0] was slower than max_tp_rate[1], the code did not sample max_tp_rate[1], which would often allow it to switch places with max_tp_rate[0] (e.g. if only the first sampling attempts were bad, but the rate is otherwise good). Also, sample attempts of rates between max_tp_rate[0] and [1] were being ignored in this case, because the code only checked if the rate was slower than [1]. Fix this by checking against the fastest / second fastest max_tp_rate instead of assuming a specific order between the two. In my tests this patch significantly reduces the time until minstrel_ht finds the optimal rate right after assoc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01mac80211: minstrel_ht: fix a logic error in RTS/CTS handlingFelix Fietkau
RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's a dual-stream rate and the sta is in dynamic SMPS mode. Cc: stable@vger.kernel.org Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS") Reported-by: Matías Richart <mrichart@fing.edu.uy> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-23mac80211: minstrel_ht: set default tx aggregation timeout to 0Felix Fietkau
The value 5000 was put here with the addition of the timeout field to ieee80211_start_tx_ba_session. It was originally added in mac80211 to save resources for drivers like iwlwifi, which only supports a limited number of concurrent aggregation sessions. Since iwlwifi does not use minstrel_ht and other drivers don't need this, 0 is a better default - especially since there have been recent reports of aggregation setup related issues reproduced with ath9k. This should improve stability without causing any adverse effects. Cc: stable@vger.kernel.org Acked-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-02mac80211: minstrel: Change expected throughput unit back to KbpsSven Eckelmann
The change from cur_tp to the function minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the current throughput. For example in minstrel_ht the correct conversion between them would be: mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..). This factor 10 must also be included in the calculation of minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing algorithms like B.A.T.M.A.N. V will make incorrect decision based on these values. Its kernel based implementation expects expected_throughput always to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps]. The same requirement has iw or olsrdv2's nl80211 based statistics module which retrieve the same data via NL80211_STA_INFO_TX_BITRATE. Cc: stable@vger.kernel.org Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function") Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-02mac80211: minstrel_ht: fix out-of-bound in minstrel_ht_set_best_prob_rateKonstantin Khlebnikov
Patch fixes this splat BUG: KASAN: slab-out-of-bounds in minstrel_ht_update_stats.isra.7+0x6e1/0x9e0 [mac80211] at addr ffff8800cee640f4 Read of size 4 by task swapper/3/0 Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiNyJhSaVnE35qS6UCGaSb2Dx1_i5HcRavuOX14oTz2P+w@mail.gmail.com Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: minstrel_ht: handle peers in dynamic SMPSKrishna Chaitanya
In case of Dynamic SMPS enable RTS/CTS for all rates. Signed-off-by: Chaitanya T K <chaitanya.mgit@gmail.com> [change comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: add max lossless throughput per rateThomas Huehn
This patch adds the new statistic "maximum possible lossless throughput" to Minstrels and Minstrel-HTs rc_stats (in debugfs). This enables comprehensive comparison between current per-rate throughput and max. achievable per-rate throughput. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: restructure per-rate throughput calculation into functionThomas Huehn
This patch moves Minstrels and Minstrel-HTs per-rate throughput calculation (EWMA(thr)) into a dedicated function to be called. Therefore the variable "unsigned int cur_tp" within struct "minstrel_rate_stats" becomes obsolete. and is removed to free up its space. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: improve Minstrel variable & function namingThomas Huehn
This patch ensures a consistent usage of variable names for type "minstrel_rate_stats" to be used as "mrs" and from type minstrel_rate as "mr" across both Minstrel & Minstrel-HT. In addition some variable and function names got changed to more meaningful ones. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: unify Minstrel & Minstrel-HTs calculation of rate statisticsThomas Huehn
This patch unifies the calculation of Minstrels and Minstrel-HTs per-rate statistic. The new common function minstrel_calc_rate_stats() is called when a statistic update is performed. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-17mac80211: minstrel_ht: fix rounding issue in MCS duration calculationFelix Fietkau
On very high MCS bitrates, the calculated duration of rates that are next to each other can be very imprecise, due to the small packet size used as reference (1200 bytes). This is most visible in VHT80 nss=2 MCS8/9, for which minstrel shows the same throughput when the probability is also the same. This leads to a bad rate selection for such rates. Fix this issue by introducing an average A-MPDU size factor into the calculation. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-28mac80211: minstrel_ht: switch to .tx_status_noskbFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel_ht: move aggregation check to .get_rate()Felix Fietkau
Preparation for adding a no-skb tx status path Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: minstrel_ht: add a small optimization to minstrel_aggr_checkFelix Fietkau
Check the queue mapping earlier, skb->queue_mapping is more likely than skb->data to still be in d-cache. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-18mac80211: minstrel_ht: fix a crash in rate sortingFelix Fietkau
The commit 5935839ad73583781b8bbe8d91412f6826e218a4 "mac80211: improve minstrel_ht rate sorting by throughput & probability" introduced a crash on rate sorting that occurs when the rate added to the sorting array is faster than all the previous rates. Due to an off-by-one error, it reads the rate index from tp_list[-1], which contains uninitialized stack garbage, and then uses the resulting index for accessing the group rate stats, leading to a crash if the garbage value is big enough. Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27mac80211: minstrel_ht: do not always skip ht rates vht_only is trueKarl Beldan
When CONFIG_MAC80211_RC_MINSTREL_VHT is set, the module param minstrel_vht_only tells minstrel_ht whether to allow the mix of ht rates with vht rates. ATM, minstrel_ht skips ht rates when minstrel_vht_only is true, but it does that even if vht is not supported, which makes the sta rates fallback to legacy as no ht rate gets enabled. Fixes: 9208247d74bc ("mac80211: minstrel_ht: add basic support for VHT rates <= 3SS@80MHz") Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-21mac80211: minstrel_ht: add basic support for VHT rates <= 3SS@80MHzKarl Beldan
When the new CONFIG_MAC80211_RC_MINSTREL_VHT is not set (default 'N'), there is no behavioral change including in sampling and MCS_GROUP_RATES remains 8. Otherwise MCS_GROUP_RATES is 10, and a module parameter *vht_only* (default 'true'), restricts the rates selection to VHT when VHT is supported. Regarding the debugfs stats buffer: It is explicitly increased from 8k to 32k to fit every rates incl. when both HT and VHT rates are enabled, as for the format, before: type rate tpt eprob *prob ret *ok(*cum) ok( cum) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) after: type rate tpt eprob *prob ret *ok(*cum) ok( cum) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) VHT40/LGI MCS5/2 0.0 0.0 0.0 0 0( 0) 0( 0) Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20mac80211: minstrel_ht: include type (cck/ht) in rates flagKarl Beldan
ATM, we grep cck rates idx with idx / MCS_GROUP_RATES == MINSTREL_CCK_GROUP. Matching neither-cck-non-ht rates could be done by replacing '==' with '>', however it would be less versatile or explicit. This will allow to match VHT rates with IEEE80211_TX_RC_VHT_MCS. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20mac80211: minstrel_ht: macros adjustments for future VHT_GROUPsKarl Beldan
No functional change. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20mac80211: minstrel_ht: Increase the range of handled rate indexesKarl Beldan
Since 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability"), the rate indexes are manipulated via u8's and hence allow for a maximum of 256 mcs_group entries in minstrel_mcs_groups. ATM, minstrel_ht advertizes support up to 3HTSS@40MHz, consuming: 8(MCS_GROUP_RATES) * (3(SS)*2(GI)*2(BW)+1(CCK)), i.e. 104 entries. Support for 3VHTSS@80MHz will require: 10(MCS_GROUP_RATES) * (3(SS)*2(GI)*2(BW)+1(CCK)) + 10(MCS_GROUP_RATES) * (3(SS)*2(GI)*3(BW)), i.e. 130 + 180 entries. This change moves from u8s to u16s where necessary. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-09mac80211: minstrel_ht: fix MCS_GROUP_RATES usageKarl Beldan
Commit 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability") replaced the constant 8 with MCS_GROUP_RATES when getting the number of streams of an HT MCS. See commit 7a5e3fa2c81c ("mac80211: minstrel_ht: replace some occurences of MCS_GROUP_RATES"). Fixes: 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability") Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11mac80211: improve minstrel_ht rate sorting by throughput & probabilityThomas Huehn
This patch improves the way minstrel_ht sorts rates according to throughput and success probability. 3 FOR-loops across the entire rate and mcs group set in function minstrel_ht_update_stats() which where used to determine the fastest, second fastest and most robust rate are reduced to 2 FOR-loop. The sorted list of rates according throughput is extended to the best four rates as we need them in upcoming joint rate and power control. The sorting is done via the new function minstrel_ht_sort_best_tp_rates(). The annotation of those 4 best throughput rates in the debugfs file rc-stats is changes to: "A,B,C,D", where A is the fastest rate and C the 4th fastest. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Tested-by: Stefan Venz <ikstream86@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-21mac80211: export the expected throughputAntonio Quartulli
Add get_expected_throughput() API to mac80211 so that each driver can implement its own version based on the RC algorithm they are using (might be using an HW RC algo). The API returns a value expressed in Kbps. Also, add the new get_expected_throughput() member to the rate_control_ops structure in order to be able to query the RC algorithm (this patch provides an implementation of this API for both minstrel and minstrel_ht). The related member in the station_info object is now filled accordingly when dumping a station. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19mac80211: minstrel-ht: small clarificationsJohannes Berg
Antonio and I were looking over this code and some things didn't immediately make sense, so we came up with two small clarifications. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: minstrel_ht: sample_table can be __read_mostlyJohannes Berg
The sample table is initialized only once at module start, so is really __read_mostly. Additionally, the code to init it can be marked __init since it will never be needed again, it is likely automatically inlined into the __init function already by the compiler, so this doesn't really make a difference. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: make rate control ops constJohannes Berg
Change the code to allow making all the rate control ops const, nothing ever needs to change them. Also change all drivers to make use of this and mark the ops const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18mac80211: fix checkpatch errorsWeilong Chen
Fix a number of different checkpatch errors. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
2013-11-25mac80211: minstrel_ht: do not sample unsupported ratesKarl Beldan
ATM minstrel_ht does not check whether a sampling rate is supported. Unsupported rates attempts can trigger when there are holes in bitfields of supported MCSes belonging to the same group (e.g many devices are MCS32 capable without MCS33->39 capable, also we systematically have a hole for CCK rates). Drop any attempts to sample unsupported rates, as suggested by Felix. This is not a problem in minstrel which fills a per STA sample table with only supported rates (though only at init). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrels: spare numerous useless calls to get_random_bytesKarl Beldan
ATM, only the first array value returned by get_random_bytes is used. This change moves the call to get_random_bytes from the nested loop it is in to its parent. While at it, replace get_random_bytes with prandom_bytes since PRNs are way enough for the selection process. After this, minstrel_ht reclaims 80 PR-bytes instead of 640 R-bytes. minstrels use sample tables to probe different rates in a randomized manner. minstrel_ht inits one single sample table upon registration (during subsys_initcalls) and minstrel uses one per STA addition in minstrel. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrel_ht: replace some occurences of MCS_GROUP_RATESKarl Beldan
Consecutive MCSes in [8*(NSS-1)->8*NSS[ have the same number NSS of streams (except for MCS32 which is mishandled ATM). ATM minstrel_ht uses MCS_GROUP_RATES in place of this 8 modulus. This change replaces such occurences and by doing so allows for different values of MCS_GROUP_RATES (e.g to cope with VHT MCS8,9). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use capped prob when computing throughputsKarl Beldan
Commit 3e8b1eb "mac80211/minstrel_ht: improve rate selection stability" introduced a local capped prob in minstrel_ht_calc_tp but omitted to use it to compute the per rate throughput. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrel_ht: fix rates selectionKarl Beldan
When initializing rates selections starting indexes upon stats update, the minstrel_sta->max_* rates should be 'group * MCS_GROUP_RATES + i' not 'i'. This affects settings where one of the peers does not support any of the rates of the group 0 (i.e. when ht_cap.mcs.rx_mask[0] == 0). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: do not override fixed_rate_idx in minstrel_ht_update_statsLorenzo Bianconi
Do not override max_tp_rate, max_tp_rate2 and max_prob_rate configured according to fixed_rate in minstrel_ht_update_stats throughput computation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-22mac80211: minstrel_ht: don't use control.flags in TX status pathJohannes Berg
Sujith reports that my commit af61a165187bb94b1dc7628ef815c23d0eacf40b ("mac80211: add control port protocol TX control flag") broke ath9k (aggregation). The reason is that I made minstrel_ht use the flag in the TX status path, where it can have been overwritten by the driver. Since we have no more space in info->flags, revert that part of the change for now, until we can reshuffle the flags or so. Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau
brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-12mac80211: add control port protocol TX control flagJohannes Berg
A lot of drivers check the frame protocol for ETH_P_PAE, for various reasons (like making those more reliable). Add a new flags bitmap to the TX control info and a new flag indicating the control port protocol is in use to let all drivers also apply such logic to other control port protocols, should they be configured. Also use the new flag in the iwlwifi drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-07-16mac80211: fix timing for 5 MHz and 10 MHz channelsSimon Wunderlich
according to IEEE 802.11-2012 section 18, various timings change when using 5 MHz and 10 MHz. Reflect this by using a "shift" when calculating durations. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211/rc80211: add chandef to rate initializationSimon Wunderlich
5 and 10 MHz support needs to know the current operating channel width, add the chandef to the rate control API. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211/minstrel_ht: fix cck rate samplingFelix Fietkau
The CCK group needs special treatment to set the right flags and rate index. Add this missing check to prevent setting broken rates for tx packets. Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-04-22mac80211/minstrel_ht: use the new rate control APIFelix Fietkau
Pass the rate selection table to mac80211 from minstrel_ht_update_stats. Only rates for sample attempts are set in info->control.rates. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-22mac80211: minstrel_ht: initialize rates selectionKarl Beldan
Initialize {mp,mi}->{max_tp_rate,max_tp_rate2,max_prob_rate} in minstrel_ht's rate_init and rate_update. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2024-05-26 19:16:46 +0000