summaryrefslogtreecommitdiff
path: root/net/mac80211/rx.c
AgeCommit message (Collapse)Author
2018-02-23mac80211: drop frames with unexpected DS bits from fast-rx to slow pathFelix Fietkau
Fixes rx for 4-addr packets in AP mode. These may be used for setting up a 4-addr link for stations that are allowed to do so. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-01-04mac80211: mesh: drop frames appearing to be from usJohannes Berg
If there are multiple mesh stations with the same MAC address, they will both get confused and start throwing warnings. Obviously in this case nothing can actually work anyway, so just drop frames that look like they're from ourselves early on. Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19Revert "mac80211: Add airtime account and scheduling to TXQs"Johannes Berg
This reverts commit b0d52ad821843a6c5badebd80feef9f871904fa6. We need to revert the TXQ scheduling API due to conflicts with a new driver, and this depends on that API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: Add airtime account and scheduling to TXQsToke Høiland-Jørgensen
This adds airtime accounting and scheduling to the mac80211 TXQ scheduler. A new hardware flag, AIRTIME_ACCOUNTING, is added that drivers can set if they support reporting airtime usage of transmissions. When this flag is set, mac80211 will expect the actual airtime usage to be reported in the tx_time and rx_time fields of the respective status structs. When airtime information is present, mac80211 will schedule TXQs (through ieee80211_next_txq()) in a way that enforces airtime fairness between active stations. This scheduling works the same way as the ath9k in-driver airtime fairness scheduling. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: always update the PM state of a peer on MGMT / DATA framesEmmanuel Grumbach
The 2016 version of the spec is more generic about when the AP should update the power management state of the peer: the AP shall update the state based on any management or data frames. This means that even non-bufferable management frames should be looked at to update to maintain the power management state of the peer. This can avoid problematic cases for example if a station disappears while being asleep and then re-appears. The AP would remember it as in power save, but the Authentication frame couldn't be used to set the peer as awake again. Note that this issues wasn't really critical since at some point (after the association) we would have removed the station and created another one with all the states cleared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13mac80211: don't look at the PM bit of BAR framesEmmanuel Grumbach
When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-08mac80211: manage RX BA session offload without SKB queueJohannes Berg
Instead of using the SKB queue with the fake pkt_type for the offloaded RX BA session management, also handle this with the normal aggregation state machine worker. This also makes the use of this more reliable since it gets rid of the allocation of the fake skb. Combined with the previous patch, this finally allows us to get rid of the pkt_type hack entirely, so do that as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-17mac80211: strictly check mesh address extension modeRajkumar Manoharan
Mesh forwarding path checks for address extension mode to fetch appropriate proxied address and MPP address. Existing condition that looks for 6 address format is not strict enough so that frames with improper values are processed and invalid entries are added into MPP table. Fix that by adding a stricter check before processing the packet. Per IEEE Std 802.11s-2011 spec. Table 7-6g1 lists address extension mode 0x3 as reserved one. And also Table Table 9-13 does not specify 0x3 as valid address field. Fixes: 9b395bc3be1c ("mac80211: verify that skb data is present") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26mac80211: make multicast variable a bool in ieee80211_accept_frame()Luca Coelho
The multicast variable in the ieee80211_accept_frame() function is treated as a boolean, but defined as int. Fix that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-25mac80211: rewrite monitor mode delivery logicJohannes Berg
The monitor mode delivery logic makes it hard to add any kind of filtering in an efficient way, because the monitor SKB is created first and then passed to all interfaces. Rewrite the logic to create the monitor SKB the first time it's actually needed, and then keep delivering it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Both conflict were simple overlapping changes. In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the conversion of the driver in net-next to use in-netdev stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mac80211: reject ToDS broadcast data framesJohannes Berg
AP/AP_VLAN modes don't accept any real 802.11 multicast data frames, but since they do need to accept broadcast management frames the same is currently permitted for data frames. This opens a security problem because such frames would be decrypted with the GTK, and could even contain unicast L3 frames. Since the spec says that ToDS frames must always have the BSSID as the RA (addr1), reject any other data frames. The problem was originally reported in "Predicting, Decrypting, and Abusing WPA2/802.11 Group Keys" at usenix https://www.usenix.org/conference/usenixsecurity16/technical-sessions/presentation/vanhoef and brought to my attention by Jouni. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> -- Dave, I didn't want to send you a new pull request for a single commit yet again - can you apply this one patch as is? Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18mac80211: keep a separate list of monitor interfaces that are upJohannes Berg
In addition to keeping monitor interfaces on the regular list of interfaces, keep those that are up and not in cooked mode on a separate list. This saves having to iterate all interfaces when delivering to monitor interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-13mac80211: fix MU-MIMO follow-MAC modeJohannes Berg
There are two bugs in the follow-MAC code: * it treats the radiotap header as the 802.11 header (therefore it can't possibly work) * it doesn't verify that the skb data it accesses is actually present in the header, which is mitigated by the first point Fix this by moving all of this out into a separate function. This function copies the data it needs using skb_copy_bits() to make sure it can be accessed if it's paged, and offsets that by the possibly present vendor radiotap header. This also makes all those conditions more readable. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-13mac80211: drop frames too short for FCS earlierJohannes Berg
Instead of dropping such frames only when removing the monitor info, drop them earlier (keeping the warning) and simplify removing monitor info. While at it, make that function return void. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-28mac80211: use driver-indicated transmitter STA only for data framesJohannes Berg
When I originally introduced using the driver-indicated station as an optimisation to avoid the hashtable lookup/iteration, of course it wasn't intended to really functionally change anything. I neglected, however, to take into account VLAN interfaces, which have the property that management and data frames are handled differently: data frames go directly to the station and the VLAN while management frames continue to be processed over the underlying/associated AP-type interface. As a consequence, when a driver used this optimisation for management frames and the user enabled VLANs, my change broke things since any management frames, particularly disassoc/deauth, were missed by hostapd. Fix this by restoring the original code path for non-data frames, they aren't critical for performance to begin with. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194713. Big thanks goes to Jarek who bisected the issue and provided a very detailed bug report, including the crucial information that he was using VLANs in his configuration. Cc: stable@vger.kernel.org Fixes: 771e846bea9e ("mac80211: allow passing transmitter station on RX") Reported-and-tested-by: Jarek Kamiński <jarek@freeside.be> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-27mac80211: don't reorder frames with SN smaller than SSNSara Sharon
When RX aggregation starts, transmitter may continue send frames with SN smaller than SSN until the AddBA response is received. However, the reorder buffer is already initialized at this point, which will cause the drop of such frames as duplicates since the head SN of the reorder buffer is set to the SSN, which is bigger. Cc: stable@vger.kernel.org Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-27mac80211: fix packet statistics for fast-RXJohannes Berg
When adding per-CPU statistics, which added statistics back to mac80211 for the fast-RX path, I evidently forgot to add the "stats->packets++" line. The reason for that is likely that I didn't see it since it's done in defragmentation for the regular RX path. Add the missing line to properly count received packets in the fast-RX case. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Reported-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-26mac80211: use helper function to access ieee802_1d_to_ac[]Amadeusz Sławiński
cleanup patch to make use of ieee80211_ac_from_tid() to retrieve ac from ieee802_1d_to_ac[] Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-14Merge tag 'mac80211-next-for-davem-2017-01-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For 4.11, we seem to have more than in the past few releases: * socket owner support for connections, so when the wifi manager (e.g. wpa_supplicant) is killed, connections are torn down - wpa_supplicant is critical to managing certain operations, and can opt in to this where applicable * minstrel & minstrel_ht updates to be more efficient (time and space) * set wifi_acked/wifi_acked_valid for skb->destructor use in the kernel, which was already available to userspace * don't indicate new mesh peers that might be used if there's no room to add them * multicast-to-unicast support in mac80211, for better medium usage (since unicast frames can use *much* higher rates, by ~3 orders of magnitude) * add API to read channel (frequency) limitations from DT * add infrastructure to allow randomizing public action frames for MAC address privacy (still requires driver support) * many cleanups and small improvements/fixes across the board ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11mac80211: recalculate min channel width on VHT opmode changesJohannes Berg
When an associated station changes its VHT operating mode this can/will affect the bandwidth it's using, and consequently we must recalculate the minimum bandwidth we need to use. Failure to do so can lead to one of two scenarios: 1) we use a too high bandwidth, this is benign 2) we use a too narrow bandwidth, causing rate control and actual PHY configuration to be out of sync, which can in turn cause problems/crashes Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-11mac80211: Fix headroom allocation when forwarding mesh pktCedric Izoard
This patch fix issue introduced by my previous commit that tried to ensure enough headroom was present, and instead broke it. When forwarding mesh pkt, mac80211 may also add security header, and it must therefore be taken into account in the needed headroom. Fixes: d8da0b5d64d5 ("mac80211: Ensure enough headroom when forwarding mesh pkt") Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-09mac80211: implement multicast forwarding on fast-RX pathJohannes Berg
In AP (or VLAN) mode, when unicast 802.11 packets are received, they might actually be multicast after conversion. In this case the fast-RX path didn't handle them properly to send them back to the wireless medium. Implement that by copying the SKB and sending it back out. The possible alternative would be to just punt the packet back to the regular (slow) RX path, but since we have almost all of the required code here already it's not so complicated to add here. Punting it back would also mean acquiring the spinlock, which would be bad for the stated purpose of the fast-RX path, to enable well-performing parallel RX. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13mac80211: Ensure enough headroom when forwarding mesh pktCedric Izoard
When a buffer is duplicated during MESH packet forwarding, this patch ensures that the new buffer has enough headroom. Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13mac80211: Remove unused 'struct ieee80211_rx_status' ptrKirtika Ruchandani
Commit 554891e63a29 introduced 'struct ieee80211_rx_status' in ieee80211_rx_h_defragment but did not use it. Compiling with W=1 gives the following warning, fix it. net/mac80211/rx.c: In function ‘ieee80211_rx_h_defragment’: net/mac80211/rx.c:1911:30: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] Fixes: 554891e63a29 ("mac80211: move packet flags into packet") Cc: Johannes Berg <johannes.berg@intel.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19mac80211: uapsd_queues is in QoS IE orderEmmanuel Grumbach
The uapsd_queue field is in QoS IE order and not in IEEE80211_AC_*'s order. This means that mac80211 would get confused between BK and BE which is certainly not such a big deal but needs to be fixed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-19mac80211: allow the driver not to pass the tid to ieee80211_sta_uapsd_triggerEmmanuel Grumbach
iwlwifi will check internally that the tid maps to an AC that is trigger enabled, but can't know what tid exactly. Allow the driver to pass a generic tid and make mac80211 assume that a trigger frame was received. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-12mac80211: filter multicast data packets on AP / AP_VLANMichael Braun
This patch adds filtering for multicast data packets on AP_VLAN interfaces that have no authorized station connected and changes filtering on AP interfaces to not count stations assigned to AP_VLAN interfaces. This saves airtime and avoids waking up other stations currently authorized in this BSS. When using WPA, the packets dropped could not be decrypted by any station. The behaviour when there are no AP_VLAN interfaces is left unchanged. When there are AP_VLAN interfaces, this patch 1. adds filtering multicast data packets sent on AP_VLAN interfaces that have no authorized station connected. No filtering happens on 4addr AP_VLAN interfaces. 2. makes filtering of multicast data packets sent on AP interfaces depend on the number of authorized stations in this bss not assigned to an AP_VLAN interface. Therefore, a new num_mcast_sta counter is added for AP_VLAN interfaces. The existing one for AP interfaces is altered to not track stations assigned to an AP_VLAN interface. The new counter is exposed in debugfs. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> [reformat commit message a bit, unline ieee80211_vif_{inc,dec}_num_mcast] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-12mac80211: validate DA/SA during A-MSDU decapsulationJohannes Berg
As pointed out by Michael Braun, we don't check inner L2 addresses during A-MSDU decapsulation, leading to the possibility that, for example, a station associated to an AP sends frames as though they came from somewhere else. Fix this problem by letting cfg80211 validate the addresses, as indicated by passing in the ones that need to be validated. Reported-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-12cfg80211: add ability to check DA/SA in A-MSDU decapsulationJohannes Berg
We should not accept arbitrary DA/SA inside A-MSDUs, it could be used to circumvent protections, like allowing a station to send frames and make them seem to come from somewhere else. Add the necessary infrastructure in cfg80211 to allow such checks, in further patches we'll start using them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-12cfg80211: let ieee80211_amsdu_to_8023s() take only header-less SKBJohannes Berg
There's only a single case where has_80211_header is passed as true, which is in mac80211. Given that there's only simple code that needs to be done before calling it, export that function from cfg80211 instead and let mac80211 call it itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-12mac80211: discard multicast and 4-addr A-MSDUsJohannes Berg
In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-04Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Resolve the merge conflict between Felix's/my and Toke's patches coming into the tree through net and mac80211-next respectively. Most of Felix's changes go away due to Toke's new infrastructure work, my patch changes to "goto begin" (the label wasn't there before) instead of returning NULL so flow control towards drivers is preserved better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30mac80211: Move reorder-sensitive TX handlers to after TXQ dequeueToke Høiland-Jørgensen
The TXQ intermediate queues can cause packet reordering when more than one flow is active to a single station. Since some of the wifi-specific packet handling (notably sequence number and encryption handling) is sensitive to re-ordering, things break if they are applied before the TXQ. This splits up the TX handlers and fast_xmit logic into two parts: An early part and a late part. The former is applied before TXQ enqueue, and the latter after dequeue. The non-TXQ path just applies both parts at once. Because fragments shouldn't be split up or reordered, the fragmentation handler is run after dequeue. Any fragments are then kept in the TXQ and on subsequent dequeues they take precedence over dequeueing from the FQ structure. This approach avoids having to scatter special cases all over the place for when TXQ is enabled, at the cost of making the fast_xmit and TX handler code slightly more complex. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> [fix a few code-style nits, make ieee80211_xmit_fast_finish void, remove a useless txq->sta check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: add start / stop NAN commandsAyala Beker
This allows user space to start/stop NAN interface. A NAN interface is like P2P device in a few aspects: it doesn't have a netdev associated to it. Add the new interface type and prevent operations that can't be executed on NAN interface like scan. Define several attributes that may be configured by user space when starting NAN functionality (master preference and dual band operation) Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-20mac80211: Use rhltable instead of rhashtableHerbert Xu
mac80211 currently uses rhashtable with insecure_elasticity set to true. The latter is because of duplicate objects. What's more, mac80211 walks the rhashtable chains by hand which is broken as rhashtable may contain multiple tables due to resizing or rehashing. This patch fixes it by converting it to the newly added rhltable interface which is designed for use with duplicate objects. With rhltable a lookup returns a list of objects instead of a single one. This is then fed into the existing for_each_sta_info macro. This patch also deletes the sta_addr_hash function since rhashtable defaults to jhash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12mac80211: send delBA on unexpected BlockAck RequestJohannes Berg
If we don't have a BA session, send delBA, as requested by the IEEE 802.11 spec. Apply the same limit of sending such a delBA only once as in the previous patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-12mac80211: send delBA on unexpected BlockAck data framesJohannes Berg
When we receive data frames with ACK policy BlockAck, send delBA as requested by the 802.11 spec. Since this would be happening for every frame inside an A-MPDU if it's really received outside a session, limit it to a single attempt. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-12mac80211: add support for radiotap timestamp fieldJohannes Berg
Use the existing device timestamp from the RX status information to add support for the new radiotap timestamp field. Currently only 32-bit counters are supported, but we also add the radiotap mactime where applicable. This new field allows more flexibility in where the timestamp is taken etc. The non-timestamp data in the field is taken from a new field in the hw struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-12mac80211: add support for MU-MIMO air snifferAviya Erenfeld
add support to MU-MIMO air sniffer according groupID: in monitor mode, use a given MU-MIMO groupID to monitor stations that belongs to that group using MU-MIMO. add support for following a station according to its MAC address using VHT MU-MIMO sniffer: the monitors wait until they get an action MU-MIMO notification frame, then parses it in order to find the groupID that corresponds to the given MAC address and monitors packets destined to that groupID using VHT MU-MIMO. Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2024-06-19 21:03:50 +0000