summaryrefslogtreecommitdiff
path: root/net/mac80211/tx.c
AgeCommit message (Collapse)Author
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()Zhengchao Shao
When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: f856373e2f31 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: mac80211: Drop support for TX push pathAlexander Wetzel
All drivers are now using mac80211 internal queues (iTXQs). Drop mac80211 internal support for the old push path. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg
Pull in wireless/main content since some new code would otherwise conflict with it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: fix ifdef symbol nameJohannes Berg
This should of course be CONFIG_, not CPTCFG_, which is an artifact from working with backports. Fixes: 9dd1953846c7 ("wifi: nl80211/mac80211: clarify link ID in control port TX") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: netdev compatible TX stop for iTXQ driversAlexander Wetzel
Properly handle TX stop for internal queues (iTXQs) within mac80211. mac80211 must not stop netdev queues when using mac80211 iTXQs. For these drivers the netdev interface is created with IFF_NO_QUEUE. While netdev still drops frames for IFF_NO_QUEUE interfaces when we stop the netdev queues, it also prints a warning when this happens: Assuming the mac80211 interface is called wlan0 we would get "Virtual device wlan0 asks to queue packet!" when netdev has to drop a frame. This patch is keeping the harmless netdev queue starts for iTXQ drivers. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-30Merge tag 'wireless-next-2022-09-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27wifi: mac80211: fix regression with non-QoS driversHans de Goede
Commit 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port") changed ieee80211_tx_control_port() to aways call __ieee80211_select_queue() without checking local->hw.queues. __ieee80211_select_queue() returns a queue-id between 0 and 3, which means that now ieee80211_tx_control_port() may end up setting the queue-mapping for a skb to a value higher then local->hw.queues if local->hw.queues is less then 4. Specifically this is a problem for ralink rt2500-pci cards where local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to return NULL and the following error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2", after which association with the AP fails. Other callers of __ieee80211_select_queue() skip calling it when local->hw.queues < IEEE80211_NUM_ACS, add the same check to ieee80211_tx_control_port(). This fixes ralink rt2500-pci and similar cards when less then 4 tx-queues no longer working. Fixes: 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port") Cc: Markus Theil <markus.theil@tu-ilmenau.de> Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: keep A-MSDU data in sta and per-linkBenjamin Berg
The A-MSDU data needs to be stored per-link and aggregated into a single value for the station. Add a new struct ieee_80211_sta_aggregates in order to store this data and a new function ieee80211_sta_recalc_aggregates to update the current data for the STA. Note that in the non MLO case the pointer in ieee80211_sta will directly reference the data in deflink.agg, which means that recalculation may be skipped in that case. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: extend ieee80211_nullfunc_get() for MLOJohannes Berg
Add a link_id parameter to ieee80211_nullfunc_get() to be able to obtain a correctly addressed frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25wifi: mac80211: allow link address A2 in TXQ dequeueJohannes Berg
In ieee80211_tx_dequeue() we currently allow a control port frame to be transmitted on a non-authorized port only if the A2 matches the local interface address, but if that's an MLD and the peer is a legacy peer, we need to allow link address here. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: fix control port frame addressingJohannes Berg
For an AP interface, when userspace specifieds the link ID to transmit the control port frame on (in particular for the initial 4-way-HS), due to the logic in ieee80211_build_hdr() for a frame transmitted from/to an MLD, we currently build a header with A1 = DA = MLD address of the peer MLD A2 = local link address (!) A3 = SA = local MLD address This clearly makes no sense, and leads to two problems: - if the frame were encrypted (not true for the initial 4-way-HS) the AAD would be calculated incorrectly - if iTXQs are used, the frame is dropped by logic in ieee80211_tx_dequeue() Fix the addressing, which fixes the first bullet, and the second bullet for peer MLDs, I'll fix the second one for non-MLD peers separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: set link ID in TX info for beaconsJohannes Berg
This is simple here, and might save drivers some work if they have common code for TX between beacons and other frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: properly implement MLO key handlingJohannes Berg
Implement key installation and lookup (on TX and RX) for MLO, so we can use multiple GTKs/IGTKs/BIGTKs. Co-authored-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: potential NULL dereference in ieee80211_tx_control_port()Dan Carpenter
The ieee80211_lookup_ra_sta() function will sometimes set "sta" to NULL so add this NULL check to prevent an Oops. Fixes: 9dd1953846c7 ("wifi: nl80211/mac80211: clarify link ID in control port TX") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuKcTAyO94YOy0Bu@kili Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: fix possible leak in ieee80211_tx_control_port()Yang Yingliang
Add missing dev_kfree_skb() in an error path in ieee80211_tx_control_port() to avoid a memory leak. Fixes: dd820ed6336a ("wifi: mac80211: return error from control port TX for drops") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220818043349.4168835-1-yangyingliang@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: optionally implement MLO multicast TXJohannes Berg
For drivers using software encryption for multicast TX, such as mac80211_hwsim, mac80211 needs to duplicate the multicast frames on each link, if MLO is enabled. Do this, but don't just make it dependent on the key but provide a separate flag for drivers to opt out of this. This is not very efficient, I expect that drivers will do it in firmware/hardware or at least with DMA engine assistence, so this is mostly for hwsim. To make this work, also implement the SNS11 sequence number space that an AP MLD shall have, and modify the API to the __ieee80211_subif_start_xmit() function to always require the link ID bits to be set. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: expand ieee80211_mgmt_tx() for MLOJohannes Berg
There are a couple of new things that should be possible with MLO: * selecting the link to transmit to a station by link ID, which a previous patch added to the nl80211 API * selecting the link by frequency, similarly * allowing transmittion to an MLD without specifying any channel or link ID, with MLD addresses Enable these use cases. Also fix the address comparison in client mode to use the AP (MLD) address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: nl80211/mac80211: clarify link ID in control port TXJohannes Berg
Clarify the link ID behaviour in control port TX, we need it to select the link to transmit on for both MLD and non-MLD receivers, but select the link address as the SA only if the receiver is not an MLD. Fixes: 67207bab9341 ("wifi: cfg80211/mac80211: Support control port TX from specific link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: return error from control port TX for dropsJohannes Berg
If the frame is going to be dropped anyway because ieee80211_lookup_ra_sta() returned an error (and even though it's a bit racy, it will likely continue to do so), return the error out instead of just silently dropping the frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: fast-xmit: handle non-MLO clientsJohannes Berg
If there's a non-MLO client, the A2 must be set to the BSSID of the link since no translation will happen in lower layers and it's needed that way for encryption. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: tx: use AP address in some places for MLOJohannes Berg
In a few places we need to use the AP (MLD) address, not the deflink BSSID, the link address translation will happen later. To make that work properly for fast-xmit, set up the ap_addr in the vif.cfg earlier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: support MLO authentication/association with one linkJohannes Berg
It might seem a bit pointless to do a multi-link operation connection with just a single link, but this is already a big change, so for now, limit MLO connections to a single link. Extending that to multiple links will require * work on parsing the multi-link element with STA profile properly, including element fragmentation; * checking the per-link status in the multi-link element * implementing logic to have active/inactive links to let drivers decide which links should be active; * implementing multicast RX deduplication; * and likely more. For now this is still useful since it lets us do multi-link connections for the purposes of testing APIs and the higher layers such as wpa_supplicant. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: select link when transmitting to non-MLO stationsAndrei Otcheretianski
When an MLO AP is transmitting to a non-MLO station, addr2 should be set to a link address. This should be done before the frame is encrypted as otherwise aad verification would fail. In case of software encryption this can't be left for the device to handle, and should be done by mac80211 when building the frame hdr. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: move IEEE80211_SDATA_OPERATING_GMODE to linkJohannes Berg
The flag here is currently per interface, but the way we set and clear it means it should be per link, so change it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: Allow EAPOL tx from specific linkAndrei Otcheretianski
Allow link source address on TX. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211/mac80211: Support control port TX from specific linkAndrei Otcheretianski
In case of authentication with a legacy station, link addressed EAPOL frames should be sent. Support it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: RCU-ify link/link_conf pointersJohannes Berg
Since links can be added and removed dynamically, we need to somehow protect the sdata->link[] and vif->link_conf[] array pointers from disappearing when accessing them without locks. RCU-ify the pointers to achieve this, which requires quite a bit of rework. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: exclude multicast packets from AQL pending airtimeFelix Fietkau
In AP mode, multicast traffic is handled very differently from normal traffic, especially if at least one client is in powersave mode. This means that multicast packets can be buffered a lot longer than normal unicast packets, and can eat up the AQL budget very quickly because of the low data rate. Along with the recent change to maintain a global PHY AQL limit, this can lead to significant latency spikes for unicast traffic. Since queueing multicast to hardware is currently not constrained by AQL limits anyway, let's just exclude it from the AQL pending airtime calculation entirely. Fixes: 8e4bac067105 ("wifi: mac80211: add a per-PHY AQL limit to improve fairness") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220713083444.86129-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01wifi: mac80211: add a per-PHY AQL limit to improve fairnessFelix Fietkau
In order to maintain fairness, the amount of queueing needs to be limited beyond the simple per-station AQL budget, otherwise the driver can simply repeatedly do scheduling rounds until all queues that have not used their AQL budget become eligble. To be conservative, use the high AQL limit for the first txq and add half of the low AQL for each subsequent queue. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: keep recently active tx queues in scheduling listFelix Fietkau
This allows proper deficit accounting to ensure that they don't carry their deficit until the next time they become active Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: consider aql_tx_pending when checking airtime deficitFelix Fietkau
When queueing packets for a station, deficit only gets added once the packets have been transmitted, which could be much later. During that time, a lot of temporary unfairness could happen, which could lead to bursty behavior. Fix this by subtracting the aql_tx_pending when checking the deficit in tx scheduling. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: make sta airtime deficit field s32 instead of s64Felix Fietkau
32 bit is more than enough range for the airtime deficit Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01wifi: mac80211: switch airtime fairness back to deficit round-robin schedulingFelix Fietkau
This reverts commits 6a789ba679d652587532cec2a0e0274fda172f3b and 2433647bc8d983a543e7d31b41ca2de1c7e2c198. The virtual time scheduler code has a number of issues: - queues slowed down by hardware/firmware powersave handling were not properly handled. - on ath10k in push-pull mode, tx queues that the driver tries to pull from were starved, causing excessive latency - delay between tx enqueue and reported airtime use were causing excessively bursty tx behavior The bursty behavior may also be present on the round-robin scheduler, but there it is much easier to fix without introducing additional regressions Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29wifi: mac80211: check skb_shared in ieee80211_8023_xmit()Ryder Lee
Add a missing skb_shared check into 802.3 path to prevent potential use-after-free from happening. This also uses skb_share_check() instead of open-coding in tx path. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/e7a73aaf7742b17e43421c56625646dfc5c4d2cb.1653571902.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add MLO link ID to TX frame metadataJohannes Berg
Take a few bits out of the control.flags to add the link ID to TX frame metadata, so drivers don't need to look it up by the address themselves. Implement that lookup where it's needed, for internal frame TX, and set it to "unspecified" for data transmissions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: remove band from TX info in MLOJohannes Berg
If the interface is an MLD, then we don't know which band the frame will be transmitted on, and we don't know how to look up the band. Set the band information to zero in that case, the driver cannot rely on it anyway. No longer inline ieee80211_tx_skb_tid() since it's even bigger now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: tx: simplify chanctx_conf handlingJohannes Berg
In ieee80211_build_hdr() we do the same thing for all interface types except for AP_VLAN, but we can simplify the code by pulling the common thing in front of the switch and overriding it for AP_VLAN. This will also simplify the code for MLD here later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: status: look up band only where neededJohannes Berg
For MLD, we might eventually not really know the band on status, but some code assumes it's there. Move the sband lookup deep to the code that actually needs it, to make it clear where exactly it's needed and for what purposes. For rate control, at least initially we won't support it in MLO, so that won't be an issue. For TX monitoring, we may have to elide the rate and/or rely on ieee80211_tx_status_ext() for rate information. This also simplifies the function prototypes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: reorg some iface data structs for MLDJohannes Berg
Start reorganizing interface related data structures toward MLD. The most complex part here is for the keys, since we have to split the various kinds of GTKs off to the link but still need to use (for WEP) the other keys as a fallback even for multicast frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-10wifi: mac80211: remove cipher scheme supportJohannes Berg
The only driver using this was iwlwifi, where we just removed the support because it was never really used. Remove the code from mac80211 as well. Change-Id: I1667417a5932315ee9d81f5c233c56a354923f09 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04mac80211: tx: delete a redundant if statement in ieee80211_check_fast_xmit()Hangyu Hua
If statement is meaningless because the code will goto out regardless of whether fast_tx is NULL or not. Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220413091902.27438-1-hbh25y@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-15mac80211: MBSSID beacon handling in AP modeLorenzo Bianconi
Add new fields in struct beacon_data to store all MBSSID elements. Generate a beacon template which includes all MBSSID elements. Move CSA offset to reflect the MBSSID element length. Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Money Wang <money.wang@mediatek.com> Link: https://lore.kernel.org/r/5322db3c303f431adaf191ab31c45e151dde5465.1645702516.git.lorenzo@kernel.org [small cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2024-06-19 12:27:58 +0000