summaryrefslogtreecommitdiff
path: root/net/mptcp
AgeCommit message (Collapse)Author
2025-02-24mptcp: pm: drop inet6_sk after inet_skGeliang Tang
In mptcp_event_add_subflow(), mptcp_event_pm_listener() and mptcp_nl_find_ssk(), 'issk' has already been got through inet_sk(). No need to use inet6_sk() to get 'ipv6_pinfo' again, just use issk->pinet6 instead. This patch also drops these 'ipv6_pinfo' variables. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-6-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: drop match in userspace_pm_append_new_local_addrGeliang Tang
The variable 'match' in mptcp_userspace_pm_append_new_local_addr() is a redundant one, and this patch drops it. No need to define 'match' as 'struct mptcp_pm_addr_entry *' type. In this function, it's only used to check whether it's NULL. It can be defined as a Boolean one. Also other variables 'addr_match' and 'id_match' make 'match' a redundant one, which can be replaced by directly checking 'addr_match && id_match'. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-5-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: add mptcp_pm_genl_fill_addr helperGeliang Tang
To save some redundant code in dump_addr() interfaces of both the netlink PM and userspace PM, the code that calls netlink message helpers (genlmsg_put/cancel/end) and mptcp_nl_fill_addr() is wrapped into a new helper mptcp_pm_genl_fill_addr(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-4-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: add a build check for userspace_pm_dump_addrGeliang Tang
This patch adds a build check for mptcp_userspace_pm_dump_addr() to make sure there is enough space in 'cb->ctx' to store an address id bitmap. Just in case info stored in 'cb->ctx' are increased later. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-3-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: change to fullmesh only for 'subflow'Matthieu Baerts (NGI0)
If an endpoint doesn't have the 'subflow' flag -- in fact, has no type, so not 'subflow', 'signal', nor 'implicit' -- there are then no subflows created from this local endpoint to at least the initial destination address. In this case, no need to call mptcp_pm_nl_fullmesh() which is there to recreate the subflows to reflect the new value of the fullmesh attribute. Similarly, there is then no need to iterate over all connections to do nothing, if only the 'fullmesh' flag has been changed, and the endpoint doesn't have the 'subflow' one. So stop early when dealing with this specific case. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-2-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: remove unused ret value to set flagsMatthieu Baerts (NGI0)
The returned value is not used, it can then be dropped. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-1-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: better track kernel sockets lifetimeEric Dumazet
While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets") Reported-by: syzbot+30a19e01a97420719891@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67b72aeb.050a0220.14d86d.0283.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250220131854.4048077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19mptcp: micro-optimize __mptcp_move_skb()Paolo Abeni
After the RX path refactor the mentioned function is expected to run frequently, let's optimize it a bit. Scan for ready subflow from the last processed one, and stop after traversing the list once or reaching the msk memory limit - instead of looking for dubious per-subflow conditions. Also re-order the memory limit checks, to avoid duplicate tests. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-7-4a47d90d7998@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19mptcp: dismiss __mptcp_rmem()Paolo Abeni
After the RX path refactor, it become a wrapper for sk_rmem_alloc access, with a slightly misleading name. Just drop it. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-6-4a47d90d7998@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19mptcp: cleanup mem accountingPaolo Abeni
After the previous patch, updating sk_forward_memory is cheap and we can drop a lot of complexity from the MPTCP memory accounting, removing the custom fwd mem allocations for rmem. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-4-4a47d90d7998@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19mptcp: move the whole rx path under msk socket lock protectionPaolo Abeni
After commit c2e6048fa1cf ("mptcp: fix race in release_cb") we can move the whole MPTCP rx path under the socket lock leveraging the release_cb. We can drop a bunch of spin_lock pairs in the receive functions, use a single receive queue and invoke __mptcp_move_skbs only when subflows ask for it. This will allow more cleanup in the next patch. Some changes are worth specific mention: The msk rcvbuf update now always happens under both the msk and the subflow socket lock: we can drop a bunch of ONCE annotation and consolidate the checks. When the skbs move is delayed at msk release callback time, even the msk rcvbuf update is delayed; additionally take care of such action in __mptcp_move_skbs(). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-3-4a47d90d7998@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19mptcp: drop __mptcp_fastopen_gen_msk_ackseq()Paolo Abeni
When we will move the whole RX path under the msk socket lock, updating the already queued skb for passive fastopen socket at 3rd ack time will be extremely painful and race prone The map_seq for already enqueued skbs is used only to allow correct coalescing with later data; preventing collapsing to the first skb of a fastopen connect we can completely remove the __mptcp_fastopen_gen_msk_ackseq() helper. Before dropping this helper, a new item had to be added to the mptcp_skb_cb structure. Because this item will be frequently tested in the fast path -- almost on every packet -- and because there is free space there, a single byte is used instead of a bitfield. This micro optimisation slightly reduces the number of CPU operations to do the associated check. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-2-4a47d90d7998@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19mptcp: consolidate subflow cleanupPaolo Abeni
Consolidate all the cleanup actions requiring the worker in a single helper and ensure the dummy data fin creation for fallback socket is performed only when the tcp rx queue is empty. There are no functional changes intended, but this will simplify the next patch, when the tcp rx queue spooling could be delayed at release_cb time. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-1-4a47d90d7998@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-11mptcp: pm: add local parameter for set_flagsGeliang Tang
This patch updates the interfaces set_flags to reduce repetitive code, adds a new parameter 'local' for them. The local address is parsed in public helper mptcp_pm_nl_set_flags_doit(), then pass it to mptcp_pm_nl_set_flags() and mptcp_userspace_pm_set_flags(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: change rem type of set_flagsGeliang Tang
Generally, in the path manager interfaces, the local address is defined as an mptcp_pm_addr_entry type address, while the remote address is defined as an mptcp_addr_info type one: (struct mptcp_pm_addr_entry *local, struct mptcp_addr_info *remote) But the set_flags() interface uses two mptcp_pm_addr_entry type parameters. This patch changes the second one to mptcp_addr_info type and use helper mptcp_pm_parse_addr() to parse it instead of using mptcp_pm_parse_entry(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: drop skb parameter of set_flagsGeliang Tang
The first parameter 'skb' in mptcp_pm_nl_set_flags() is only used to obtained the network namespace, which can also be obtained through the second parameters 'info' by using genl_info_net() helper. This patch drops these useless parameters 'skb' in all three set_flags() interfaces. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: reuse sending nlmsg code in get_addrGeliang Tang
The netlink messages are sent both in mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive. This is because the netlink PM and userspace PM use different locks to protect the address entry that needs to be sent via the netlink message. The former uses rcu read lock, and the latter uses msk->pm.lock. The current get_addr() flow looks like this: lock(); entry = get_entry(); send_nlmsg(entry); unlock(); After holding the lock, get the entry from the list, send the entry, and finally release the lock. This patch changes the process by getting the entry while holding the lock, then making a copy of the entry so that the lock can be released. Finally, the copy of the entry is sent without locking: lock(); entry = get_entry(); *copy = *entry; unlock(); send_nlmsg(copy); This way we can reuse the send_nlmsg() code in get_addr() interfaces between the netlink PM and userspace PM. They only need to implement their own get_addr() interfaces to hold the different locks, get the entry from the different lists, then release the locks. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: add id parameter for get_addrGeliang Tang
The address id is parsed both in mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive. So this patch adds a new parameter 'id' for all get_addr() interfaces. The address id is only parsed in mptcp_pm_nl_get_addr_doit(), then pass it to both mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: drop skb parameter of get_addrGeliang Tang
The first parameters 'skb' of get_addr() interfaces are now useless since mptcp_userspace_pm_get_sock() helper is used. This patch drops these useless parameters of them. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: make three pm wrappers staticGeliang Tang
Three netlink functions: mptcp_pm_nl_get_addr_doit() mptcp_pm_nl_get_addr_dumpit() mptcp_pm_nl_set_flags_doit() are generic, implemented for each PM, in-kernel PM and userspace PM. It's clearer to move them from pm_netlink.c to pm.c. And the linked three path manager wrappers mptcp_pm_get_addr() mptcp_pm_dump_addr() mptcp_pm_set_flags() can be changed as static functions, no need to export them in protocol.h. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: use NL_SET_ERR_MSG_ATTR when possibleMatthieu Baerts (NGI0)
Instead of only returning a text message with GENL_SET_ERR_MSG(), NL_SET_ERR_MSG_ATTR() can help the userspace developers by also reporting which attribute is faulty. When the error is specific to an attribute, NL_SET_ERR_MSG_ATTR() is now used. The error messages have not been modified in this commit. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: mark missing address attributesMatthieu Baerts (NGI0)
mptcp_pm_parse_entry() will check if the given attribute is defined. If not, it will return a generic error: "missing address info". It might then not be clear for the userspace developer which attribute is missing, especially when the command takes multiple addresses. By using GENL_REQ_ATTR_CHECK(), the userspace will get a hint about which attribute is missing, making thing clearer. Note that this is what was already done for most of the other MPTCP NL commands, this patch simply adds the missing ones. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: remove duplicated error messagesMatthieu Baerts (NGI0)
mptcp_pm_parse_entry() and mptcp_pm_parse_addr() will already set a error message in case of parsing issue. Then, no need to override this error message with another less precise one: "error parsing address". Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: userspace: use GENL_REQ_ATTR_CHECKGeliang Tang
A more general way to check if MPTCP_PM_ATTR_* exists in 'info' is to use GENL_REQ_ATTR_CHECK(info, MPTCP_PM_ATTR_*) instead of directly reading info->attrs[MPTCP_PM_ATTR_*] and then checking if it's NULL. So this patch uses GENL_REQ_ATTR_CHECK() for userspace PM in mptcp_pm_nl_announce_doit(), mptcp_pm_nl_remove_doit(), mptcp_pm_nl_subflow_create_doit(), mptcp_pm_nl_subflow_destroy_doit() and mptcp_userspace_pm_get_sock(). Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: improve error messagesMatthieu Baerts (NGI0)
Some error messages were: - too generic: "missing input", "invalid request" - not precise enough: "limit greater than maximum" but what's the max? - missing: subflow not found, or connect error. This can be easily improved by being more precise, or adding new error messages. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: more precise error messagesMatthieu Baerts (NGI0)
Some errors reported by the userspace PM were vague: "this or that is invalid". It is easier for the userspace to know which part is wrong, instead of having to guess that. While at it, in mptcp_userspace_pm_set_flags() move the parsing after the check linked to the local attribute. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: userspace: flags: clearer msg if no remote addrMatthieu Baerts (NGI0)
Since its introduction in commit 892f396c8e68 ("mptcp: netlink: issue MP_PRIO signals from userspace PMs"), it was mandatory to specify the remote address, because of the 'if (rem->addr.family == AF_UNSPEC)' check done later one. In theory, this attribute can be optional, but it sounds better to be precise to avoid sending the MP_PRIO on the wrong subflow, e.g. if there are multiple subflows attached to the same local ID. This can be relaxed later on if there is a need to act on multiple subflows with one command. For the moment, the check to see if attr_rem is NULL can be removed, because mptcp_pm_parse_entry() will do this check as well, no need to do that differently here. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11mptcp: pm: drop info of userspace_pm_remove_id_zero_addressGeliang Tang
The only use of 'info' parameter of userspace_pm_remove_id_zero_address() is to set an error message into it. Plus, this helper will only fail when it cannot find any subflows with a local address ID 0. This patch drops this parameter and sets the error message where this function is called in mptcp_pm_nl_remove_doit(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-30mptcp: blackhole only if 1st SYN retrans w/o MPC is acceptedMatthieu Baerts (NGI0)
The Fixes commit mentioned this: > An MPTCP firewall blackhole can be detected if the following SYN > retransmission after a fallback to "plain" TCP is accepted. But in fact, this blackhole was detected if any following SYN retransmissions after a fallback to TCP was accepted. That's because 'mptcp_subflow_early_fallback()' will set 'request_mptcp' to 0, and 'mpc_drop' will never be reset to 0 after. This is an issue, because some not so unusual situations might cause the kernel to detect a false-positive blackhole, e.g. a client trying to connect to a server while the network is not ready yet, causing a few SYN retransmissions, before reaching the end server. Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-27mptcp: handle fastopen disconnect correctlyPaolo Abeni
Syzbot was able to trigger a data stream corruption: WARNING: CPU: 0 PID: 9846 at net/mptcp/protocol.c:1024 __mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024 Modules linked in: CPU: 0 UID: 0 PID: 9846 Comm: syz-executor351 Not tainted 6.13.0-rc2-syzkaller-00059-g00a5acdbf398 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024 Code: fa ff ff 48 8b 4c 24 18 80 e1 07 fe c1 38 c1 0f 8c 8e fa ff ff 48 8b 7c 24 18 e8 e0 db 54 f6 e9 7f fa ff ff e8 e6 80 ee f5 90 <0f> 0b 90 4c 8b 6c 24 40 4d 89 f4 e9 04 f5 ff ff 44 89 f1 80 e1 07 RSP: 0018:ffffc9000c0cf400 EFLAGS: 00010293 RAX: ffffffff8bb0dd5a RBX: ffff888033f5d230 RCX: ffff888059ce8000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000c0cf518 R08: ffffffff8bb0d1dd R09: 1ffff110170c8928 R10: dffffc0000000000 R11: ffffed10170c8929 R12: 0000000000000000 R13: ffff888033f5d220 R14: dffffc0000000000 R15: ffff8880592b8000 FS: 00007f6e866496c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6e86f491a0 CR3: 00000000310e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __mptcp_clean_una_wakeup+0x7f/0x2d0 net/mptcp/protocol.c:1074 mptcp_release_cb+0x7cb/0xb30 net/mptcp/protocol.c:3493 release_sock+0x1aa/0x1f0 net/core/sock.c:3640 inet_wait_for_connect net/ipv4/af_inet.c:609 [inline] __inet_stream_connect+0x8bd/0xf30 net/ipv4/af_inet.c:703 mptcp_sendmsg_fastopen+0x2a2/0x530 net/mptcp/protocol.c:1755 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1830 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6e86ebfe69 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 1f 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6e86649168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6e86f491b8 RCX: 00007f6e86ebfe69 RDX: 0000000030004001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6e86f491b0 R08: 00007f6e866496c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6e86f491bc R13: 000000000000006e R14: 00007ffe445d9420 R15: 00007ffe445d9508 </TASK> The root cause is the bad handling of disconnect() generated internally by the MPTCP protocol in case of connect FASTOPEN errors. Address the issue increasing the socket disconnect counter even on such a case, to allow other threads waiting on the same socket lock to properly error out. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Reported-by: syzbot+ebc0b8ae5d3590b2c074@syzkaller.appspotmail.com Closes: https://lore.kernel.org/67605870.050a0220.37aaf.0137.GAE@google.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/537 Tested-by: syzbot+ebc0b8ae5d3590b2c074@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-3-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27mptcp: pm: only set fullmesh for subflow endpMatthieu Baerts (NGI0)
With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address. Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before. That's what syzbot found, triggering the following warning: WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 00000000000011f4 </TASK> Here, syzbot managed to set the 'fullmesh' flag on an 'implicit' and used -- according to 'id_avail_bitmap' -- endpoint, causing the PM to try decrement the local_addr_used counter which is only incremented for the 'subflow' endpoint. Note that 'no type' endpoints -- not 'subflow', 'signal', 'implicit' -- are fine, because their ID will not be marked as used in the 'id_avail' bitmap, and setting 'fullmesh' can help forcing the creation of subflow when receiving an ADD_ADDR. Fixes: 73c762c1f07d ("mptcp: set fullmesh flag in pm_netlink") Cc: stable@vger.kernel.org Reported-by: syzbot+cd16e79c1e45f3fe0377@syzkaller.appspotmail.com Closes: https://lore.kernel.org/6786ac51.050a0220.216c54.00a6.GAE@google.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/540 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-2-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27mptcp: consolidate suboption statusPaolo Abeni
MPTCP maintains the received sub-options status is the bitmask carrying the received suboptions and in several bitfields carrying per suboption additional info. Zeroing the bitmask before parsing is not enough to ensure a consistent status, and the MPTCP code has to additionally clear some bitfiled depending on the actually parsed suboption. The above schema is fragile, and syzbot managed to trigger a path where a relevant bitfield is not cleared/initialized: BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline] BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline] BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline] BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 __mptcp_expand_seq net/mptcp/options.c:1030 [inline] mptcp_expand_seq net/mptcp/protocol.h:864 [inline] ack_update_msk net/mptcp/options.c:1060 [inline] mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264 tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236 __ip_finish_output+0x287/0x810 ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434 dst_output include/net/dst.h:450 [inline] ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550 __tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 ____sys_sendmsg+0x877/0xb60 net/socket.c:2583 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: mptcp_get_options+0x2c0f/0x2f20 net/mptcp/options.c:397 mptcp_incoming_options+0x19a/0x3d30 net/mptcp/options.c:1150 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264 tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 Uninit was stored to memory at: put_unaligned_be32 include/linux/unaligned.h:68 [inline] mptcp_write_options+0x17f9/0x3100 net/mptcp/options.c:1417 mptcp_options_write net/ipv4/tcp_output.c:465 [inline] tcp_options_write+0x6d9/0xe90 net/ipv4/tcp_output.c:759 __tcp_transmit_skb+0x294b/0x4900 net/ipv4/tcp_output.c:1414 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 ____sys_sendmsg+0x877/0xb60 net/socket.c:2583 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: mptcp_pm_add_addr_signal+0x3d7/0x4c0 mptcp_established_options_add_addr net/mptcp/options.c:666 [inline] mptcp_established_options+0x1b9b/0x3a00 net/mptcp/options.c:884 tcp_established_options+0x2c4/0x7d0 net/ipv4/tcp_output.c:1012 __tcp_transmit_skb+0x5b7/0x4900 net/ipv4/tcp_output.c:1333 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 ____sys_sendmsg+0x877/0xb60 net/socket.c:2583 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: mptcp_pm_add_addr_received+0x95f/0xdd0 net/mptcp/pm.c:235 mptcp_incoming_options+0x2983/0x3d30 net/mptcp/options.c:1169 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_state_process+0x2a38/0x49d0 net/ipv4/tcp_input.c:6972 tcp_v4_do_rcv+0xbf9/0x11a0 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 Local variable mp_opt created at: mptcp_incoming_options+0x119/0x3d30 net/mptcp/options.c:1127 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 The current schema is too fragile; address the issue grouping all the state-related data together and clearing the whole group instead of just the bitmask. This also cleans-up the code a bit, as there is no need to individually clear "random" bitfield in a couple of places any more. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Cc: stable@vger.kernel.org Reported-by: syzbot+23728c2df58b3bd175ad@syzkaller.appspotmail.com Closes: https://lore.kernel.org/6786ac51.050a0220.216c54.00a7.GAE@google.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/541 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250123-net-mptcp-syzbot-issues-v1-1-af73258a726f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18mptcp: sysctl: add syn_retrans_before_tcp_fallbackMatthieu Baerts (NGI0)
The number of SYN + MPC retransmissions before falling back to TCP was fixed to 2. This is certainly a good default value, but having a fixed number can be a problem in some environments. The current behaviour means that if all packets are dropped, there will be: - The initial SYN + MPC - 2 retransmissions with MPC - The next ones will be without MPTCP. So typically ~3 seconds before falling back to TCP. In some networks where some temporally blackholes are unfortunately frequent, or when a client tries to initiate connections while the network is not ready yet, this can cause new connections not to have MPTCP connections. In such environments, it is now possible to increase the number of SYN retransmissions with MPTCP options to make sure MPTCP is used. Interesting values are: - 0: the first retransmission will be done without MPTCP options: quite aggressive, but also a higher risk of detecting false-positive MPTCP blackholes. - >= 128: all SYN retransmissions will keep the MPTCP options: back to the < 6.12 behaviour. The default behaviour is not changed here. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250117-net-next-mptcp-syn_retrans_before_tcp_fallback-v1-1-ab4b187099b0@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15mptcp: fix for setting remote ipv4mapped addressGeliang Tang
Commit 1c670b39cec7 ("mptcp: change local addr type of subflow_destroy") introduced a bug in mptcp_pm_nl_subflow_destroy_doit(). ipv6_addr_set_v4mapped() should be called to set the remote ipv4 address 'addr_r.addr.s_addr' to the remote ipv6 address 'addr_r.addr6', not 'addr_l.addr.addr6', which is the local ipv6 address. Fixes: 1c670b39cec7 ("mptcp: change local addr type of subflow_destroy") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250114-net-next-mptcp-fix-remote-addr-v1-1-debcd84ea86f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14mptcp: fix spurious wake-up on under memory pressurePaolo Abeni
The wake-up condition currently implemented by mptcp_epollin_ready() is wrong, as it could mark the MPTCP socket as readable even when no data are present and the system is under memory pressure. Explicitly check for some data being available in the receive queue. Fixes: 5684ab1a0eff ("mptcp: give rcvlowat some love") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-2-0d986ee7b1b6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14mptcp: be sure to send ack when mptcp-level window re-opensPaolo Abeni
mptcp_cleanup_rbuf() is responsible to send acks when the user-space reads enough data to update the receive windows significantly. It tries hard to avoid acquiring the subflow sockets locks by checking conditions similar to the ones implemented at the TCP level. To avoid too much code duplication - the MPTCP protocol can't reuse the TCP helpers as part of the relevant status is maintained into the msk socket - and multiple costly window size computation, mptcp_cleanup_rbuf uses a rough estimate for the most recently advertised window size: the MPTCP receive free space, as recorded as at last-ack time. Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect a zero to non-zero win change in some corner cases, skipping the tcp_cleanup_rbuf call and leaving the peer stuck. After commit ea66758c1795 ("tcp: allow MPTCP to update the announced window"), MPTCP has actually cheap access to the announced window value. Use it in mptcp_cleanup_rbuf() for a more accurate ack generation. Fixes: e3859603ba13 ("mptcp: better msk receive window updates") Cc: stable@vger.kernel.org Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-1-0d986ee7b1b6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-13net: remove init_dummy_netdev()Jakub Kicinski
init_dummy_netdev() can initialize statically declared or embedded net_devices. Such netdevs did not come from alloc_netdev_mqs(). After recent work by Breno, there are the only two cases where we have do that. Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev(). Dealing with static netdevs is not worth the maintenance burden. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc7). Conflicts: a42d71e322a8 ("net_sched: sch_cake: Add drop reasons") 737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts") Adjacent changes: drivers/net/ethernet/meta/fbnic/fbnic.h 3a856ab34726 ("eth: fbnic: add IRQ reuse support") 95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09mptcp: sysctl: blackhole timeout: avoid using current->nsproxyMatthieu Baerts (NGI0)
As mentioned in the previous commit, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'pernet' structure can be obtained from the table->data using container_of(). Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1] Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-3-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09mptcp: sysctl: sched: avoid using current->nsproxyMatthieu Baerts (NGI0)
Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 ---------------- Code disassembly (best guess), 1 bytes skipped: 0: 42 80 3c 38 00 cmpb $0x0,(%rax,%r15,1) 5: 0f 85 fe 02 00 00 jne 0x309 b: 4d 8b a4 24 08 09 00 mov 0x908(%r12),%r12 12: 00 13: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1a: fc ff df 1d: 49 8d 7c 24 28 lea 0x28(%r12),%rdi 22: 48 89 fa mov %rdi,%rdx 25: 48 c1 ea 03 shr $0x3,%rdx * 29: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction 2d: 0f 85 cc 02 00 00 jne 0x2ff 33: 4d 8b 7c 24 28 mov 0x28(%r12),%r15 38: 48 rex.W 39: 8d .byte 0x8d 3a: 84 24 c8 test %ah,(%rax,%rcx,8) Here with 'net.mptcp.scheduler', the 'net' structure is not really needed, because the table->data already has a pointer to the current scheduler, the only thing needed from the per-netns data. Simply use 'data', instead of getting (most of the time) the same thing, but from a longer and indirect way. Fixes: 6963c508fd7a ("mptcp: only allow set existing scheduler for net.mptcp.scheduler") Cc: stable@vger.kernel.org Reported-by: syzbot+e364f774c6f57f2c86d1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-2-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09mptcp: sysctl: avail sched: remove write accessMatthieu Baerts (NGI0)
'net.mptcp.available_schedulers' sysctl knob is there to list available schedulers, not to modify this list. There are then no reasons to give write access to it. Nothing would have been written anyway, but no errors would have been returned, which is unexpected. Fixes: 73c900aa3660 ("mptcp: add net.mptcp.available_schedulers") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-1-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc6). No conflicts. Adjacent changes: include/linux/if_vlan.h f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK") 3f330db30638 ("net: reformat kdoc return statements") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-02mptcp: prevent excessive coalescing on receivePaolo Abeni
Currently the skb size after coalescing is only limited by the skb layout (the skb must not carry frag_list). A single coalesced skb covering several MSS can potentially fill completely the receive buffer. In such a case, the snd win will zero until the receive buffer will be empty again, affecting tput badly. Fixes: 8268ed4c9d19 ("mptcp: introduce and use mptcp_try_coalesce()") Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-02mptcp: don't always assume copied data in mptcp_cleanup_rbuf()Paolo Abeni
Under some corner cases the MPTCP protocol can end-up invoking mptcp_cleanup_rbuf() when no data has been copied, but such helper assumes the opposite condition. Explicitly drop such assumption and performs the costly call only when strictly needed - before releasing the msk socket lock. Fixes: fd8976790a6c ("mptcp: be careful on MPTCP-level ack.") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-2-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-02mptcp: fix recvbuffer adjust on sleeping rcvmsgPaolo Abeni
If the recvmsg() blocks after receiving some data - i.e. due to SO_RCVLOWAT - the MPTCP code will attempt multiple times to adjust the receive buffer size, wrongly accounting every time the cumulative of received data - instead of accounting only for the delta. Address the issue moving mptcp_rcv_space_adjust just after the data reception and passing it only the just received bytes. This also removes an unneeded difference between the TCP and MPTCP RX code path implementation. Fixes: 581302298524 ("mptcp: error out earlier on disconnect") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-1-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-30mptcp: fix TCP options overflow.Paolo Abeni
Syzbot reported the following splat: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline] RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552 Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83 RSP: 0000:ffffc90003916c90 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007 R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_page_unref include/linux/skbuff_ref.h:43 [inline] __skb_frag_unref include/linux/skbuff_ref.h:56 [inline] skb_release_data+0x483/0x8a0 net/core/skbuff.c:1119 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb+0x55/0x70 net/core/skbuff.c:1204 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3436 [inline] tcp_ack+0x2442/0x6bc0 net/ipv4/tcp_input.c:4032 tcp_rcv_state_process+0x8eb/0x44e0 net/ipv4/tcp_input.c:6805 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5672 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5785 process_backlog+0x662/0x15b0 net/core/dev.c:6117 __napi_poll+0xcb/0x490 net/core/dev.c:6883 napi_poll net/core/dev.c:6952 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:7074 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x57/0xc0 arch/x86/kernel/apic/apic.c:1049 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0033:0x7f34f4519ad5 Code: 85 d2 74 0d 0f 10 02 48 8d 54 24 20 0f 11 44 24 20 64 8b 04 25 18 00 00 00 85 c0 75 27 41 b8 08 00 00 00 b8 0f 01 00 00 0f 05 <48> 3d 00 f0 ff ff 76 75 48 8b 15 24 73 0d 00 f7 d8 64 89 02 48 83 RSP: 002b:00007ffec5b32ce0 EFLAGS: 00000246 RAX: 0000000000000001 RBX: 00000000000668a0 RCX: 00007f34f4519ad5 RDX: 00007ffec5b32d00 RSI: 0000000000000004 RDI: 0000564f4bc6cae0 RBP: 0000564f4bc6b5a0 R08: 0000000000000008 R09: 0000000000000000 R10: 00007ffec5b32de8 R11: 0000000000000246 R12: 0000564f48ea8aa4 R13: 0000000000000001 R14: 0000564f48ea93e8 R15: 00007ffec5b32d68 </TASK> Eric noted a probable shinfo->nr_frags corruption, which indeed occurs. The root cause is a buggy MPTCP option len computation in some circumstances: the ADD_ADDR option should be mutually exclusive with DSS since the blamed commit. Still, mptcp_established_options_add_addr() tries to set the relevant info in mptcp_out_options, if the remaining space is large enough even when DSS is present. Since the ADD_ADDR infos and the DSS share the same union fields, adding first corrupts the latter. In the worst-case scenario, such corruption increases the DSS binary layout, exceeding the computed length and possibly overwriting the skb shared info. Address the issue by enforcing mutual exclusion in mptcp_established_options_add_addr(), too. Cc: stable@vger.kernel.org Reported-by: syzbot+38a095a81f30d82884c1@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/538 Fixes: 1bff1e43a30e ("mptcp: optimize out option generation") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/025d9df8cde3c9a557befc47e9bc08fbbe3476e5.1734771049.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15mptcp: drop useless "err = 0" in subflow_destroyGeliang Tang
Upon successful return, mptcp_pm_parse_addr() returns 0. There is no need to set "err = 0" after this. So after mptcp_nl_find_ssk() returns, just need to set "err = -ESRCH", then release and free msk socket if it returns NULL. Also, no need to define the variable "subflow" in subflow_destroy(), use mptcp_subflow_ctx(ssk) directly. This patch doesn't change the behaviour of the code, just refactoring. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-7-ddb6d00109a8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15mptcp: change local addr type of subflow_destroyGeliang Tang
Generally, in the path manager interfaces, the local address is defined as an mptcp_pm_addr_entry type address, while the remote address is defined as an mptcp_addr_info type one: (struct mptcp_pm_addr_entry *local, struct mptcp_addr_info *remote) But subflow_destroy() interface uses two mptcp_addr_info type parameters. This patch changes the first one to mptcp_pm_addr_entry type and use helper mptcp_pm_parse_entry() to parse it instead of using mptcp_pm_parse_addr(). This patch doesn't change the behaviour of the code, just refactoring. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-6-ddb6d00109a8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15mptcp: drop free_list for deleting entriesGeliang Tang
mptcp_pm_remove_addrs() actually only deletes one address, which does not match its name. This patch renames it to mptcp_pm_remove_addr_entry() and changes the parameter "rm_list" to "entry". With the help of mptcp_pm_remove_addr_entry(), it's no longer necessary to move the entry to be deleted to free_list and then traverse the list to delete the entry, which is not allowed in BPF. The entry can be directly deleted through list_del_rcu() and sock_kfree_s() now. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-5-ddb6d00109a8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-04 14:22:18 +0000