| Age | Commit message (Collapse) | Author |
|---|
|
Pull networking fixes from David Miller:
1) Use after free in rxrpc_put_local(), from David Howells.
2) Fix 64-bit division error in mlxsw, from Nathan Chancellor.
3) Make sure we clear various bits of TCP state in response to
tcp_disconnect(). From Eric Dumazet.
4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet.
5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen.
6) Fix TC queue mapping in bnxt_en driver, from Michael Chan.
7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data,
snapshot panics, stack out of bounds, etc.)
8) cls_tcindex changes hash table size after allocating the table, fix
from Cong Wang.
9) Fix regression in the enforcement of session ID uniqueness in l2tp.
We only have to enforce uniqueness for IP based tunnels not UDP
ones. From Ridge Kennedy.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
gtp: use __GFP_NOWARN to avoid memalloc warning
l2tp: Allow duplicate session creation with UDP
r8152: Add MAC passthrough support to new device
net_sched: fix an OOB access in cls_tcindex
qed: Remove set but not used variable 'p_link'
tc-testing: add missing 'nsPlugin' to basic.json
tc-testing: fix eBPF tests failure on linux fresh clones
net: hsr: fix possible NULL deref in hsr_handle_frame()
netdevsim: remove unused sdev code
netdevsim: use __GFP_NOWARN to avoid memalloc warning
netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
netdevsim: fix panic in nsim_dev_take_snapshot_write()
netdevsim: disable devlink reload when resources are being used
netdevsim: fix using uninitialized resources
bnxt_en: Fix TC queue mapping.
bnxt_en: Fix logic that disables Bus Master during firmware reset.
bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
net: stmmac: Delete txtimer in suspend()
...
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During the refactor this was accidently removed.
Fixes: ae29045018c8 ("netfilter: flowtable: add nf_flow_offload_tuple() helper")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If entries exist when freeing a hardware offload enabled table,
we queue work for hardware while running the gc iteration.
Execute it (flush) after queueing.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
On netdev down event, nf_flow_table_cleanup() is called for the relevant
device and it cleans all the tables that are on that device.
If one of those tables has hardware offload flag,
nf_flow_table_iterate_cleanup flushes hardware and then runs the gc.
But the gc can queue more hardware work, which will take time to execute.
Instead first add the work, then flush it, to execute it now.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Convert the uses of kvmalloc_array with __GFP_ZERO to
the equivalent kvcalloc.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
find_set_and_id() is called when the NFNL_SUBSYS_IPSET mutex is held.
However, in the error path there can be a follow-up recvmsg() without
the mutex held. Use the start() function of struct netlink_dump_control
instead of dump() to verify and report if the specified set does not
exist.
Thanks to Pablo Neira Ayuso for helping me to understand the subleties
of the netlink protocol.
Reported-by: syzbot+fc69d7cb21258ab4ae4d@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This new set type allows for intervals in concatenated fields,
which are expressed in the usual way, that is, simple byte
concatenation with padding to 32 bits for single fields, and
given as ranges by specifying start and end elements containing,
each, the full concatenation of start and end values for the
single fields.
Ranges are expanded to composing netmasks, for each field: these
are inserted as rules in per-field lookup tables. Bits to be
classified are divided in 4-bit groups, and for each group, the
lookup table contains 4^2 buckets, representing all the possible
values of a bit group. This approach was inspired by the Grouper
algorithm:
http://www.cse.usf.edu/~ligatti/projects/grouper/
Matching is performed by a sequence of AND operations between
bucket values, with buckets selected according to the value of
packet bits, for each group. The result of this sequence tells
us which rules matched for a given field.
In order to concatenate several ranged fields, per-field rules
are mapped using mapping arrays, one per field, that specify
which rules should be considered while matching the next field.
The mapping array for the last field contains a reference to
the element originally inserted.
The notes in nft_set_pipapo.c cover the algorithm in deeper
detail.
A pure hash-based approach is of no use here, as ranges need
to be classified. An implementation based on "proxying" the
existing red-black tree set type, creating a tree for each
field, was considered, but deemed impractical due to the fact
that elements would need to be shared between trees, at least
as long as we want to keep UAPI changes to a minimum.
A stand-alone implementation of this algorithm is available at:
https://pipapo.lameexcu.se
together with notes about possible future optimisations
(in pipapo.c).
This algorithm was designed with data locality in mind, and can
be highly optimised for SIMD instruction sets, as the bulk of
the matching work is done with repetitive, simple bitwise
operations.
At this point, without further optimisations, nft_concat_range.sh
reports, for one AMD Epyc 7351 thread (2.9GHz, 512 KiB L1D$, 8 MiB
L2$):
TEST: performance
net,port [ OK ]
baseline (drop from netdev hook): 10190076pps
baseline hash (non-ranged entries): 6179564pps
baseline rbtree (match on first field only): 2950341pps
set with 1000 full, ranged entries: 2304165pps
port,net [ OK ]
baseline (drop from netdev hook): 10143615pps
baseline hash (non-ranged entries): 6135776pps
baseline rbtree (match on first field only): 4311934pps
set with 100 full, ranged entries: 4131471pps
net6,port [ OK ]
baseline (drop from netdev hook): 9730404pps
baseline hash (non-ranged entries): 4809557pps
baseline rbtree (match on first field only): 1501699pps
set with 1000 full, ranged entries: 1092557pps
port,proto [ OK ]
baseline (drop from netdev hook): 10812426pps
baseline hash (non-ranged entries): 6929353pps
baseline rbtree (match on first field only): 3027105pps
set with 30000 full, ranged entries: 284147pps
net6,port,mac [ OK ]
baseline (drop from netdev hook): 9660114pps
baseline hash (non-ranged entries): 3778877pps
baseline rbtree (match on first field only): 3179379pps
set with 10 full, ranged entries: 2082880pps
net6,port,mac,proto [ OK ]
baseline (drop from netdev hook): 9718324pps
baseline hash (non-ranged entries): 3799021pps
baseline rbtree (match on first field only): 1506689pps
set with 1000 full, ranged entries: 783810pps
net,mac [ OK ]
baseline (drop from netdev hook): 10190029pps
baseline hash (non-ranged entries): 5172218pps
baseline rbtree (match on first field only): 2946863pps
set with 1000 full, ranged entries: 1279122pps
v4:
- fix build for 32-bit architectures: 64-bit division needs
div_u64() (kbuild test robot <lkp@intel.com>)
v3:
- rework interface for field length specification,
NFT_SET_SUBKEY disappears and information is stored in
description
- remove scratch area to store closing element of ranges,
as elements now come with an actual attribute to specify
the upper range limit (Pablo Neira Ayuso)
- also remove pointer to 'start' element from mapping table,
closing key is now accessible via extension data
- use bytes right away instead of bits for field lengths,
this way we can also double the inner loop of the lookup
function to take care of upper and lower bits in a single
iteration (minor performance improvement)
- make it clearer that set operations are actually atomic
API-wise, but we can't e.g. implement flush() as one-shot
action
- fix type for 'dup' in nft_pipapo_insert(), check for
duplicates only in the next generation, and in general take
care of differentiating generation mask cases depending on
the operation (Pablo Neira Ayuso)
- report C implementation matching rate in commit message, so
that AVX2 implementation can be compared (Pablo Neira Ayuso)
v2:
- protect access to scratch maps in nft_pipapo_lookup() with
local_bh_disable/enable() (Florian Westphal)
- drop rcu_read_lock/unlock() from nft_pipapo_lookup(), it's
already implied (Florian Westphal)
- explain why partial allocation failures don't need handling
in pipapo_realloc_scratch(), rename 'm' to clone and update
related kerneldoc to make it clear we're not operating on
the live copy (Florian Westphal)
- add expicit check for priv->start_elem in
nft_pipapo_insert() to avoid ending up in nft_pipapo_walk()
with a NULL start element, and also zero it out in every
operation that might make it invalid, so that insertion
doesn't proceed with an invalid element (Florian Westphal)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Introduce a new nested netlink attribute, NFTA_SET_DESC_CONCAT, used
to specify the length of each field in a set concatenation.
This allows set implementations to support concatenation of multiple
ranged items, as they can divide the input key into matching data for
every single field. Such set implementations would be selected as
they specify support for NFT_SET_INTERVAL and allow desc->field_count
to be greater than one. Explicitly disallow this for nft_set_rbtree.
In order to specify the interval for a set entry, userspace would
include in NFTA_SET_DESC_CONCAT attributes field lengths, and pass
range endpoints as two separate keys, represented by attributes
NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_KEY_END.
While at it, export the number of 32-bit registers available for
packet matching, as nftables will need this to know the maximum
number of field lengths that can be specified.
For example, "packets with an IPv4 address between 192.0.2.0 and
192.0.2.42, with destination port between 22 and 25", can be
expressed as two concatenated elements:
NFTA_SET_ELEM_KEY: 192.0.2.0 . 22
NFTA_SET_ELEM_KEY_END: 192.0.2.42 . 25
and NFTA_SET_DESC_CONCAT attribute would contain:
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 4
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 2
v4: No changes
v3: Complete rework, NFTA_SET_DESC_CONCAT instead of NFTA_SET_SUBKEY
v2: No changes
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add NFTA_SET_ELEM_KEY_END attribute to convey the closing element of the
interval between kernel and userspace.
This patch also adds the NFT_SET_EXT_KEY_END extension to store the
closing element value in this interval.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; add corresponding
nft_set_ext_type for new key; rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helper function to parse the set element key netlink attribute.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; use NFT_DATA_VALUE_MAXLEN
instead of sizeof(*key) in helper, value can be longer than that;
rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Minor conflict in mlx5 because changes happened to code that has
moved meanwhile.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing netlink attribute sanity check for NFTA_OSF_DREG,
from Florian Westphal.
2) Use bitmap infrastructure in ipset to fix KASAN slab-out-of-bounds
reads, from Jozsef Kadlecsik.
3) Missing initial CLOSED state in new sctp connection through
ctnetlink events, from Jiri Wiesner.
4) Missing check for NFT_CHAIN_HW_OFFLOAD in nf_tables offload
indirect block infrastructure, from wenxu.
5) Add __nft_chain_type_get() to sanity check family and chain type.
6) Autoload modules from the nf_tables abort path to fix races
reported by syzbot.
7) Remove unnecessary skb->csum update on inet_proto_csum_replace16(),
from Praveen Chaudhary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces a list of pending module requests. This new module
list is composed of nft_module_request objects that contain the module
name and one status field that tells if the module has been already
loaded (the 'done' field).
In the first pass, from the preparation phase, the netlink command finds
that a module is missing on this list. Then, a module request is
allocated and added to this list and nft_request_module() returns
-EAGAIN. This triggers the abort path with the autoload parameter set on
from nfnetlink, request_module() is called and the module request enters
the 'done' state. Since the mutex is released when loading modules from
the abort phase, the module list is zapped so this is iteration occurs
over a local list. Therefore, the request_module() calls happen when
object lists are in consistent state (after fulling aborting the
transaction) and the commit list is empty.
On the second pass, the netlink command will find that it already tried
to load the module, so it does not request it again and
nft_request_module() returns 0. Then, there is a look up to find the
object that the command was missing. If the module was successfully
loaded, the command proceeds normally since it finds the missing object
in place, otherwise -ENOENT is reported to userspace.
This patch also updates nfnetlink to include the reason to enter the
abort phase, which is required for this new autoload module rationale.
Fixes: ec7470b834fe ("netfilter: nf_tables: store transaction list locally while requesting module")
Reported-by: syzbot+29125d208b3dae9a7019@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This new helper function validates that unknown family and chain type
coming from userspace do not trigger an out-of-bound array access. Bail
out in case __nft_chain_type_get() returns NULL from
nft_chain_parse_hook().
Fixes: 9370761c56b6 ("netfilter: nf_tables: convert built-in tables/chains to chain types")
Reported-by: syzbot+156a04714799b1d480bc@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In the nft_indr_block_cb the chain should check the flag with
NFT_CHAIN_HW_OFFLOAD.
Fixes: 9a32669fecfb ("netfilter: nf_tables_offload: support indr block call")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The netlink notifications triggered by the INIT and INIT_ACK chunks
for a tracked SCTP association do not include protocol information
for the corresponding connection - SCTP state and verification tags
for the original and reply direction are missing. Since the connection
tracking implementation allows user space programs to receive
notifications about a connection and then create a new connection
based on the values received in a notification, it makes sense that
INIT and INIT_ACK notifications should contain the SCTP state
and verification tags available at the time when a notification
is sent. The missing verification tags cause a newly created
netfilter connection to fail to verify the tags of SCTP packets
when this connection has been created from the values previously
received in an INIT or INIT_ACK notification.
A PROTOINFO event is cached in sctp_packet() when the state
of a connection changes. The CLOSED and COOKIE_WAIT state will
be used for connections that have seen an INIT and INIT_ACK chunk,
respectively. The distinct states will cause a connection state
change in sctp_packet().
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There is a spelling mistake in a IP_VS_ERR_RL message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bitmap allocation did not use full unsigned long sizes
when calculating the required size and that was triggered by KASAN
as slab-out-of-bounds read in several places. The patch fixes all
of them.
Reported-by: syzbot+fabca5cbf5e54f3fe2de@syzkaller.appspotmail.com
Reported-by: syzbot+827ced406c9a1d9570ed@syzkaller.appspotmail.com
Reported-by: syzbot+190d63957b22ef673ea5@syzkaller.appspotmail.com
Reported-by: syzbot+dfccdb2bdb4a12ad425e@syzkaller.appspotmail.com
Reported-by: syzbot+df0d0f5895ef1f41a65b@syzkaller.appspotmail.com
Reported-by: syzbot+b08bd19bb37513357fd4@syzkaller.appspotmail.com
Reported-by: syzbot+53cdd0ec0bbabd53370a@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
|
|
syzbot reports just another NULL deref crash because of missing test
for presence of the attribute.
Reported-by: syzbot+cf23983d697c26c34f60@syzkaller.appspotmail.com
Fixes: b96af92d6eaf9fadd ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Hitherto nft_bitwise has only supported boolean operations: NOT, AND, OR
and XOR. Extend it to do shifts as well.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new bitwise netlink attribute that will be used by shift
operations to store the size of the shift. It is not used by boolean
operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Only boolean operations supports offloading, so check the type of the
operation and return an error for other types.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Split the code specific to dumping bitwise boolean operations out into a
separate function. A similar function will be added later for shift
operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Split the code specific to evaluating bitwise boolean operations out
into a separate function. Similar functions will be added later for
shift operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Split the code specific to initializing bitwise boolean operations out
into a separate function. A similar function will be added later for
shift operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new bitwise netlink attribute, NFTA_BITWISE_OP, which is set to a
value of a new enum, nft_bitwise_ops. It describes the type of
operation an expression contains. Currently, it only has one value:
NFT_BITWISE_BOOL. More values will be added later to implement shifts.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When dumping a bitwise expression, if any of the puts fails, we use goto
to jump to a label. However, no clean-up is required and the only
statement at the label is a return. Drop the goto's and return
immediately instead.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In later patches, we will be adding more checks. In order to be
consistent and prevent complaints from checkpatch.pl, replace the
existing comparisons with NULL with logical NOT operators.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Indentation fixes for the parameters of a few nft functions.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Split nf_flow_table_offload_setup() in two functions to make it more
maintainable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Consolidate code to configure the flow_cls_offload structure into one
helper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
no need, just use a simple boolean to indicate we want to reap all
entries.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If nf_flow_offload_add() fails to add the flow to hardware, then the
NF_FLOW_HW_REFRESH flag bit is set and the flow remains in the flowtable
software path.
If flowtable hardware offload is enabled, this patch enqueues a new
request to offload this flow to hardware.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This function checks for the NF_FLOWTABLE_HW_OFFLOAD flag, meaning that
the flowtable hardware offload is enabled.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Originally, all flow flag bits were set on only from the workqueue. With
the introduction of the flow teardown state and hardware offload this is
no longer true. Let's be safe and use atomic bitwise operation to
operation with flow flags.
Fixes: 59c466dd68e7 ("netfilter: nf_flow_table: add a new flow state for tearing down offloading")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The dying bit removes the conntrack entry if the netdev that owns this
flow is going down. Instead, use the teardown mechanism to push back the
flow to conntrack to let the classic software path decide what to do
with it.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helper function to allocate and initialize flow offload work and use
it to consolidate existing code.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Set on FLOW_DISSECTOR_KEY_META meta key using flow tuple ingress interface.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Do not fetch statistics if flow has expired since it might not in
hardware anymore. After this update, remove the FLOW_OFFLOAD_HW_DYING
check from nf_flow_offload_stats() since this flag is never set on.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>
|
|
Commit 8303b7e8f018 ("netfilter: nat: fix spurious connection timeouts")
made nf_nat_icmp_reply_translation() use icmp_manip_pkt() as the l4
manipulation function for the outer packet on ICMP errors.
However, icmp_manip_pkt() assumes the packet has an 'id' field which
is not correct for all types of ICMP messages.
This is not correct for ICMP error packets, and leads to bogus bytes
being written the ICMP header, which can be wrongfully regarded as
'length' bytes by RFC 4884 compliant receivers.
Fix by assigning the 'id' field only for ICMP messages that have this
semantic.
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Fixes: 8303b7e8f018 ("netfilter: nat: fix spurious connection timeouts")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot reported following crash:
list_del corruption, ffff88808c9bb000->prev is LIST_POISON2 (dead000000000122)
[..]
Call Trace:
__list_del_entry include/linux/list.h:131 [inline]
list_del_rcu include/linux/rculist.h:148 [inline]
nf_tables_commit+0x1068/0x3b30 net/netfilter/nf_tables_api.c:7183
[..]
The commit transaction list has:
NFT_MSG_NEWTABLE
NFT_MSG_NEWFLOWTABLE
NFT_MSG_DELFLOWTABLE
NFT_MSG_DELTABLE
A missing generation check during DELTABLE processing causes it to queue
the DELFLOWTABLE operation a second time, so we corrupt the list here:
case NFT_MSG_DELFLOWTABLE:
list_del_rcu(&nft_trans_flowtable(trans)->list);
nf_tables_flowtable_notify(&trans->ctx,
because we have two different DELFLOWTABLE transactions for the same
flowtable. We then call list_del_rcu() twice for the same flowtable->list.
The object handling seems to suffer from the same bug so add a generation
check too and only queue delete transactions for flowtables/objects that
are still active in the next generation.
Reported-by: syzbot+37a6804945a3a13b1572@syzkaller.appspotmail.com
Fixes: 3b49e2e94e6eb ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Syzbot detected a leak in nf_tables_parse_netdev_hooks(). If the hook
already exists, then the error handling doesn't free the newest "hook".
Reported-by: syzbot+f9d4095107fc8749c69c@syzkaller.appspotmail.com
Fixes: b75a3e8371bc ("netfilter: nf_tables: allow netdevice to be used only once per flowtable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This WARN can trigger because some of the names fed to the module
autoload function can be of arbitrary length.
Remove the WARN and add limits for all NLA_STRING attributes.
Reported-by: syzbot+0e63ae76d117ae1c3a01@syzkaller.appspotmail.com
Fixes: 452238e8d5ffd8 ("netfilter: nf_tables: add and use helper for module autoload")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fixes: af308b94a2a4a5 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
else we get null deref when one of the attributes is missing, both
must be non-null.
Reported-by: syzbot+76d0b80493ac881ff77b@syzkaller.appspotmail.com
Fixes: aaecfdb5c5dd8ba ("netfilter: nf_tables: match on tunnel metadata")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch fixes a WARN_ON in nft_set_destroy() due to missing
set reference count drop from the preparation phase. This is triggered
by the module autoload path. Do not exercise the abort path from
nft_request_module() while preparation phase cleaning up is still
pending.
WARNING: CPU: 3 PID: 3456 at net/netfilter/nf_tables_api.c:3740 nft_set_destroy+0x45/0x50 [nf_tables]
[...]
CPU: 3 PID: 3456 Comm: nft Not tainted 5.4.6-arch3-1 #1
RIP: 0010:nft_set_destroy+0x45/0x50 [nf_tables]
Code: e8 30 eb 83 c6 48 8b 85 80 00 00 00 48 8b b8 90 00 00 00 e8 dd 6b d7 c5 48 8b 7d 30 e8 24 dd eb c5 48 89 ef 5d e9 6b c6 e5 c5 <0f> 0b c3 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 7f 10 e9 52
RSP: 0018:ffffac4f43e53700 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff99d63a154d80 RCX: 0000000001f88e03
RDX: 0000000001f88c03 RSI: ffff99d6560ef0c0 RDI: ffff99d63a101200
RBP: ffff99d617721de0 R08: 0000000000000000 R09: 0000000000000318
R10: 00000000f0000000 R11: 0000000000000001 R12: ffffffff880fabf0
R13: dead000000000122 R14: dead000000000100 R15: ffff99d63a154d80
FS: 00007ff3dbd5b740(0000) GS:ffff99d6560c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00001cb5de6a9000 CR3: 000000016eb6a004 CR4: 00000000001606e0
Call Trace:
__nf_tables_abort+0x3e3/0x6d0 [nf_tables]
nft_request_module+0x6f/0x110 [nf_tables]
nft_expr_type_request_module+0x28/0x50 [nf_tables]
nf_tables_expr_parse+0x198/0x1f0 [nf_tables]
nft_expr_init+0x3b/0xf0 [nf_tables]
nft_dynset_init+0x1e2/0x410 [nf_tables]
nf_tables_newrule+0x30a/0x930 [nf_tables]
nfnetlink_rcv_batch+0x2a0/0x640 [nfnetlink]
nfnetlink_rcv+0x125/0x171 [nfnetlink]
netlink_unicast+0x179/0x210
netlink_sendmsg+0x208/0x3d0
sock_sendmsg+0x5e/0x60
____sys_sendmsg+0x21b/0x290
Update comment on the code to describe the new behaviour.
Reported-by: Marco Oliverio <marco.oliverio@tanaza.com>
Fixes: 452238e8d5ff ("netfilter: nf_tables: add and use helper for module autoload")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This is a straight-forward conversion case for the new function, keeping
the flow of the existing code as intact as possible.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
map->members is freed by ip_set_free() right before using it in
mtype_ext_cleanup() again. So we just have to move it down.
Reported-by: syzbot+4c3cc6dbe7259dbf9054@syzkaller.appspotmail.com
Fixes: 40cd63bf33b2 ("netfilter: ipset: Support extensions which need a per data destroy function")
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
