summaryrefslogtreecommitdiff
path: root/net/netlabel/netlabel_kapi.c
AgeCommit message (Collapse)Author
2017-01-06netlabel: add CALIPSO to the list of built-in protocolsPaul Moore
When we added CALIPSO support in Linux v4.8 we forgot to add it to the list of supported protocols with display at boot. Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27netlabel: Implement CALIPSO config functions for SMACK.Huw Davies
SMACK uses similar functions to control CIPSO, these are the equivalent functions for CALIPSO and follow exactly the same semantics. int netlbl_cfg_calipso_add(struct calipso_doi *doi_def, struct netlbl_audit *audit_info) Adds a CALIPSO doi. void netlbl_cfg_calipso_del(u32 doi, struct netlbl_audit *audit_info) Removes a CALIPSO doi. int netlbl_cfg_calipso_map_add(u32 doi, const char *domain, const struct in6_addr *addr, const struct in6_addr *mask, struct netlbl_audit *audit_info) Creates a mapping between a domain and a CALIPSO doi. If addr and mask are non-NULL this creates an address-selector type mapping. This also extends netlbl_cfg_map_del() to remove IPv6 address-selector mappings. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Add a label cache.Huw Davies
This works in exactly the same way as the CIPSO label cache. The idea is to allow the lsm to cache the result of a secattr lookup so that it doesn't need to perform the lookup for every skbuff. It introduces two sysctl controls: calipso_cache_enable - enables/disables the cache. calipso_cache_bucket_size - sets the size of a cache bucket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Pass a family parameter to netlbl_skbuff_err().Huw Davies
This makes it possible to route the error to the appropriate labelling engine. CALIPSO is far less verbose than CIPSO when encountering a bogus packet, so there is no need for a CALIPSO error handler. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Allow the lsm to label the skbuff directly.Huw Davies
In some cases, the lsm needs to add the label to the skbuff directly. A NF_INET_LOCAL_OUT IPv6 hook is added to selinux to match the IPv4 behaviour. This allows selinux to label the skbuffs that it requires. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Allow request sockets to be relabelled by the lsm.Huw Davies
Request sockets need to have a label that takes into account the incoming connection as well as their parent's label. This is used for the outgoing SYN-ACK and for their child full-socket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Set the calipso socket label to match the secattr.Huw Davies
CALIPSO is a hop-by-hop IPv6 option. A lot of this patch is based on the equivalent CISPO code. The main difference is due to manipulating the options in the hop-by-hop header. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Move bitmap manipulation functions to the NetLabel core.Huw Davies
This is to allow the CALIPSO labelling engine to use these. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Initial support for the CALIPSO netlink protocol.Huw Davies
CALIPSO is a packet labelling protocol for IPv6 which is very similar to CIPSO. It is specified in RFC 5570. Much of the code is based on the current CIPSO code. This adds support for adding passthrough-type CALIPSO DOIs through the NLBL_CALIPSO_C_ADD command. It requires attributes: NLBL_CALIPSO_A_TYPE which must be CALIPSO_MAP_PASS. NLBL_CALIPSO_A_DOI. In passthrough mode the CALIPSO engine will map MLS secattr levels and categories directly to the packet label. At this stage, the major difference between this and the CIPSO code is that IPv6 may be compiled as a module. To allow for this the CALIPSO functions are registered at module init time. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Add an address family to domain hash entries.Huw Davies
The reason is to allow different labelling protocols for different address families with the same domain. This requires the addition of an address family attribute in the netlink communication protocol. It is used in several messages: NLBL_MGMT_C_ADD and NLBL_MGMT_C_ADDDEF take it as an optional attribute for the unlabelled protocol. It may be one of AF_INET, AF_INET6 or AF_UNSPEC (to specify both address families). If it is missing, it defaults to AF_UNSPEC. NLBL_MGMT_C_LISTALL and NLBL_MGMT_C_LISTDEF return it as part of the enumeration of each item. Addtionally, it may be sent to LISTDEF to specify which address family to return. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-09netlabel: handle sparse category maps in netlbl_catmap_getlong()Paul Moore
In cases where the category bitmap is sparse enough that gaps exist between netlbl_lsm_catmap structs, callers to netlbl_catmap_getlong() could find themselves prematurely ending their search through the category bitmap. Further, the methods used to calculate the 'idx' and 'off' values were incorrect for bitmaps this large. This patch changes the netlbl_catmap_getlong() behavior so that it always skips over gaps and calculates the index and offset values correctly. Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-06netlabel: add address family checks to netlbl_{sock,req}_delattr()Paul Moore
It seems risky to always rely on the caller to ensure the socket's address family is correct before passing it to the NetLabel kAPI, especially since we see at least one LSM which didn't. Add address family checks to the *_delattr() functions to help prevent future problems. Cc: <stable@vger.kernel.org> Reported-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-05netlabel: fix a problem with netlbl_secattr_catmap_setrng()Janak Desai
We try to be clever and set large chunks of the bitmap at once, when possible; unfortunately we weren't very clever when we wrote the code and messed up the if-conditional. Fix this bug and restore proper operation. Signed-off-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Signed-off-by: Paul Moore <paul@paul-moore.com>
2015-02-11cipso: don't use IPCB() to locate the CIPSO IP optionPaul Moore
Using the IPCB() macro to get the IPv4 options is convenient, but unfortunately NetLabel often needs to examine the CIPSO option outside of the scope of the IP layer in the stack. While historically IPCB() worked above the IP layer, due to the inclusion of the inet_skb_param struct at the head of the {tcp,udp}_skb_cb structs, recent commit 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") reordered the tcp_skb_cb struct and invalidated this IPCB() trick. This patch fixes the problem by creating a new function, cipso_v4_optptr(), which locates the CIPSO option inside the IP header without calling IPCB(). Unfortunately, this isn't as fast as a simple lookup so some additional tweaks were made to limit the use of this new function. Cc: <stable@vger.kernel.org> # 3.18 Reported-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-10-09netlabel: kernel-doc warning fixFabian Frederick
no secid argument in netlbl_cfg_unlbl_static_del Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-08-01netlabel: shorter names for the NetLabel catmap funcs/structsPaul Moore
Historically the NetLabel LSM secattr catmap functions and data structures have had very long names which makes a mess of the NetLabel code and anyone who uses NetLabel. This patch renames the catmap functions and structures from "*_secattr_catmap_*" to just "*_catmap_*" which improves things greatly. There are no substantial code or logic changes in this patch. Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01netlabel: fix the catmap walking functionsPaul Moore
The two NetLabel LSM secattr catmap walk functions didn't handle certain edge conditions correctly, causing incorrect security labels to be generated in some cases. This patch corrects these problems and converts the functions to use the new _netlbl_secattr_catmap_getnode() function in order to reduce the amount of repeated code. Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01netlabel: fix the horribly broken catmap functionsPaul Moore
The NetLabel secattr catmap functions, and the SELinux import/export glue routines, were broken in many horrible ways and the SELinux glue code fiddled with the NetLabel catmap structures in ways that we probably shouldn't allow. At some point this "worked", but that was likely due to a bit of dumb luck and sub-par testing (both inflicted by yours truly). This patch corrects these problems by basically gutting the code in favor of something less obtuse and restoring the NetLabel abstractions in the SELinux catmap glue code. Everything is working now, and if it decides to break itself in the future this code will be much easier to debug than the code it replaces. One noteworthy side effect of the changes is that it is no longer necessary to allocate a NetLabel catmap before calling one of the NetLabel APIs to set a bit in the catmap. NetLabel will automatically allocate the catmap nodes when needed, resulting in less allocations when the lowest bit is greater than 255 and less code in the LSMs. Cc: stable@vger.kernel.org Reported-by: Christian Evans <frodox@zoho.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01netlabel: fix a problem when setting bits below the previously lowest bitPaul Moore
The NetLabel category (catmap) functions have a problem in that they assume categories will be set in an increasing manner, e.g. the next category set will always be larger than the last. Unfortunately, this is not a valid assumption and could result in problems when attempting to set categories less than the startbit in the lowest catmap node. In some cases kernel panics and other nasties can result. This patch corrects the problem by checking for this and allocating a new catmap node instance and placing it at the front of the list. Cc: stable@vger.kernel.org Reported-by: Christian Evans <frodox@zoho.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-07-15netlabel: remove unnecessary break after gotoFabian Frederick
Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06netlabel: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Paul Moore <paul@paul-moore.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-10inet: includes a sock_common in request_sockEric Dumazet
TCP listener refactoring, part 5 : We want to be able to insert request sockets (SYN_RECV) into main ehash table instead of the per listener hash table to allow RCU lookups and remove listener lock contention. This patch includes the needed struct sock_common in front of struct request_sock This means there is no more inet6_request_sock IPv6 specific structure. Following inet_request_sock fields were renamed as they became macros to reference fields from struct sock_common. Prefix ir_ was chosen to avoid name collisions. loc_port -> ir_loc_port loc_addr -> ir_loc_addr rmt_addr -> ir_rmt_addr rmt_port -> ir_rmt_port iif -> ir_iif Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02netlabel: use domain based selectors when address based selectors are not ↵Paul Moore
available NetLabel has the ability to selectively assign network security labels to outbound traffic based on either the LSM's "domain" (different for each LSM), the network destination, or a combination of both. Depending on the type of traffic, local or forwarded, and the type of traffic selector, domain or address based, different hooks are used to label the traffic; the goal being minimal overhead. Unfortunately, there is a bug such that a system using NetLabel domain based traffic selectors does not correctly label outbound local traffic that is not assigned to a socket. The issue is that in these cases the associated NetLabel hook only looks at the address based selectors and not the domain based selectors. This patch corrects this by checking both the domain and address based selectors so that the correct labeling is applied, regardless of the configuration type. In order to acomplish this fix, this patch also simplifies some of the NetLabel domainhash structures to use a more common outbound traffic mapping type: struct netlbl_dommap_def. This simplifies some of the code in this patch and paves the way for further simplifications in the future. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-22netlabel: use GFP flags from caller instead of GFP_ATOMICDan Carpenter
This function takes a GFP flags as a parameter, but they are never used. We don't take a lock in this function so there is no reason to prefer GFP_ATOMIC over the caller's GFP flags. There is only one caller, cipso_v4_map_cat_rng_ntoh(), and it passes GFP_ATOMIC as the GFP flags so this doesn't change how the code works. It's just a cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-11net: use IS_ENABLED(CONFIG_IPV6)Eric Dumazet
Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-11-29netlabel: Fix build problems when IPv6 is not enabledPaul Moore
A recent fix to the the NetLabel code caused build problem with configurations that did not have IPv6 enabled; see below: netlabel_kapi.c: In function 'netlbl_cfg_unlbl_map_add': netlabel_kapi.c:165:4: error: implicit declaration of function 'netlbl_af6list_add' This patch fixes this problem by making the IPv6 specific code conditional on the IPv6 configuration flags as we done in the rest of NetLabel and the network stack as a whole. We have to move some variable declarations around as a result so things may not be quite as pretty, but at least it builds cleanly now. Some additional IPv6 conditionals were added to the NetLabel code as well for the sake of consistency. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/inet_diag.c
2011-11-25net/netlabel: copy and paste bug in netlbl_cfg_unlbl_map_add()Dan Carpenter
This was copy and pasted from the IPv4 code. We're calling the ip4 version of that function and map4 is NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11net/netlabel/netlabel_kapi.c: add missing cleanup codeJulia Lawall
Call cipso_v4_doi_putdef in the case of the failure of the allocation of entry. Reverse the order of the error handling code at the end of the function and insert more labels in order to reduce the number of unnecessary calls to kfree. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-01doc: Update the email address for Paul Moore in various source filesPaul Moore
My @hp.com will no longer be valid starting August 5, 2011 so an update is necessary. My new email address is employer independent so we don't have to worry about doing this again any time soon. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-07-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-07-30net/netlabel: Add kmalloc NULL testsJulia Lawall
The test on map4 should be a test on map6. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27net/netlabel: Correct redundant testJulia Lawall
entry was tested for NULL near the beginning of the function, followed by a return, and there is no intervening modification of its value. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( *x == NULL | *x != NULL ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-28netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connectionsPaul Moore
This patch cleans up a lot of the Smack network access control code. The largest changes are to fix the labeling of incoming TCP connections in a manner similar to the recent SELinux changes which use the security_inet_conn_request() hook to label the request_sock and let the label move to the child socket via the normal network stack mechanisms. In addition to the incoming TCP connection fixes this patch also removes the smk_labled field from the socket_smack struct as the minor optimization advantage was outweighed by the difficulty in maintaining it's proper state. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28netlabel: Label incoming TCP connections correctly in SELinuxPaul Moore
The current NetLabel/SELinux behavior for incoming TCP connections works but only through a series of happy coincidences that rely on the limited nature of standard CIPSO (only able to convey MLS attributes) and the write equality imposed by the SELinux MLS constraints. The problem is that network sockets created as the result of an incoming TCP connection were not on-the-wire labeled based on the security attributes of the parent socket but rather based on the wire label of the remote peer. The issue had to do with how IP options were managed as part of the network stack and where the LSM hooks were in relation to the code which set the IP options on these newly created child sockets. While NetLabel/SELinux did correctly set the socket's on-the-wire label it was promptly cleared by the network stack and reset based on the IP options of the remote peer. This patch, in conjunction with a prior patch that adjusted the LSM hook locations, works to set the correct on-the-wire label format for new incoming connections through the security_inet_conn_request() hook. Besides the correct behavior there are many advantages to this change, the most significant is that all of the NetLabel socket labeling code in SELinux now lives in hooks which can return error codes to the core stack which allows us to finally get ride of the selinux_netlbl_inode_permission() logic which greatly simplfies the NetLabel/SELinux glue code. In the process of developing this patch I also ran into a small handful of AF_INET6 cleanliness issues that have been fixed which should make the code safer and easier to extend in the future. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-12-31netlabel: Update kernel configuration APIPaul Moore
Update the NetLabel kernel API to expose the new features added in kernel releases 2.6.25 and 2.6.28: the static/fallback label functionality and network address based selectors. Signed-off-by: Paul Moore <paul.moore@hp.com>
2008-10-10netlabel: Add configuration support for local labelingPaul Moore
Add the necessary NetLabel support for the new CIPSO mapping, CIPSO_V4_MAP_LOCAL, which allows full LSM label/context support. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10cipso: Add support for native local labeling and fixup mapping namesPaul Moore
This patch accomplishes three minor tasks: add a new tag type for local labeling, rename the CIPSO_V4_MAP_STD define to CIPSO_V4_MAP_TRANS and replace some of the CIPSO "magic numbers" with constants from the header file. The first change allows CIPSO to support full LSM labels/contexts, not just MLS attributes. The second change brings the mapping names inline with what userspace is using, compatibility is preserved since we don't actually change the value. The last change is to aid readability and help prevent mistakes. Signed-off-by: Paul Moore <paul.moore@hp.com>
2008-10-10selinux: Set socket NetLabel based on connection endpointPaul Moore
Previous work enabled the use of address based NetLabel selectors, which while highly useful, brought the potential for additional per-packet overhead when used. This patch attempts to solve that by applying NetLabel socket labels when sockets are connect()'d. This should alleviate the per-packet NetLabel labeling for all connected sockets (yes, it even works for connected DGRAM sockets). Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Add functionality to set the security attributes of a packetPaul Moore
This patch builds upon the new NetLabel address selector functionality by providing the NetLabel KAPI and CIPSO engine support needed to enable the new packet-based labeling. The only new addition to the NetLabel KAPI at this point is shown below: * int netlbl_skbuff_setattr(skb, family, secattr) ... and is designed to be called from a Netfilter hook after the packet's IP header has been populated such as in the FORWARD or LOCAL_OUT hooks. This patch also provides the necessary SELinux hooks to support this new functionality. Smack support is not currently included due to uncertainty regarding the permissions needed to expand the Smack network access controls. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Add network address selectors to the NetLabel/LSM domain mappingPaul Moore
This patch extends the NetLabel traffic labeling capabilities to individual packets based not only on the LSM domain but the by the destination address as well. The changes here only affect the core NetLabel infrastructre, changes to the NetLabel KAPI and individial protocol engines are also required but are split out into a different patch to ease review. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Replace protocol/NetLabel linking with refrerence countsPaul Moore
NetLabel has always had a list of backpointers in the CIPSO DOI definition structure which pointed to the NetLabel LSM domain mapping structures which referenced the CIPSO DOI struct. The rationale for this was that when an administrator removed a CIPSO DOI from the system all of the associated NetLabel LSM domain mappings should be removed as well; a list of backpointers made this a simple operation. Unfortunately, while the backpointers did make the removal easier they were a bit of a mess from an implementation point of view which was making further development difficult. Since the removal of a CIPSO DOI is a realtively rare event it seems to make sense to remove this backpointer list as the optimization was hurting us more then it was helping. However, we still need to be able to track when a CIPSO DOI definition is being used so replace the backpointer list with a reference count. In order to preserve the current functionality of removing the associated LSM domain mappings when a CIPSO DOI is removed we walk the LSM domain mapping table, removing the relevant entries. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10selinux: Fix missing calls to netlbl_skbuff_err()Paul Moore
At some point I think I messed up and dropped the calls to netlbl_skbuff_err() which are necessary for CIPSO to send error notifications to remote systems. This patch re-introduces the error handling calls into the SELinux code. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Remove unneeded in-kernel API functionsPaul Moore
After some discussions with the Smack folks, well just Casey, I now have a better idea of what Smack wants out of NetLabel in the future so I think it is now safe to do some API "pruning". If another LSM comes along that needs this functionality we can always add it back in, but I don't see any LSMs on the horizon which might make use of these functions. Thanks to Rami Rosen who suggested removing netlbl_cfg_cipsov4_del() back in February 2008. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-02-05NetLabel: introduce a new kernel configuration API for NetLabelPaul Moore
Add a new set of configuration functions to the NetLabel/LSM API so that LSMs can perform their own configuration of the NetLabel subsystem without relying on assistance from userspace. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>