summaryrefslogtreecommitdiff
path: root/net/nfc
AgeCommit message (Collapse)Author
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: introduce and use genl_family_attrbuf()Johannes Berg
This helper function allows family implementations to access their family's attrbuf. This gets rid of the attrbuf usage in families, and also adds locking validation, since it's not valid to use the attrbuf with parallel_ops or outside of the dumpit callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11NFC: digital: Fix RTOX supervisor PDU handlingThierry Escande
When the target needs more time to process the received PDU, it sends Response Timeout Extension (RTOX) PDU. When the initiator receives a RTOX PDU, it must reply with a RTOX PDU and extends the current rwt value with the formula: rwt_int = rwt * rtox This patch takes care of the rtox value passed by the target in the RTOX PDU and extends the timeout for the next response accordingly. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Add support for NFC DEP Response Waiting TimeThierry Escande
When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Free supervisor PDUsThierry Escande
This patch frees the RTOX resp sk_buff in initiator mode. It also makes use of the free_resp exit point for ATN supervisor PDUs in both initiator and target mode. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Rework ACK PDU handling in initiator modeThierry Escande
With this patch, ACK PDU sk_buffs are now freed and code has been refactored for better errors handling. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Fix ACK & NACK PDUs handling in target modeThierry Escande
When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Fix target DEP_REQ I-PDU handling after ATN PDUThierry Escande
When the initiator sends a DEP_REQ I-PDU, the target device may not reply in a timely manner. In this case the initiator device must send an attention PDU (ATN) and if the recipient replies with an ATN PDU in return, then the last I-PDU must be sent again by the initiator. This patch fixes how the target handles I-PDU received after an ATN PDU has been received. There are 2 possible cases: - The target has received the initial DEP_REQ and sends back the DEP_RES but the initiator did not receive it. In this case, after the initiator has sent an ATN PDU and the target replied it (with an ATN as well), the initiator sends the saved skb of the initial DEP_REQ again and the target replies with the saved skb of the initial DEP_RES. - Or the target did not even received the initial DEP_REQ. In this case, after the ATN PDUs exchange, the initiator sends the saved skb and the target simply passes it up, just as usual. This behavior is controlled using the atn_count and the PNI field of the digital device structure. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Remove useless call to skb_reserve()Thierry Escande
When allocating chained I-PDUs, there is no need to call skb_reserve() since it's already done by digital_alloc_skb() and contains enough room for the driver head and tail data. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-11NFC: digital: Fix handling of saved PDU sk_buff pointersThierry Escande
This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: digital: Abort last command when dep link goes downThierry Escande
With this patch, the Digital Protocol layer abort the last issued command when the dep link goes down. That way it does not have to wait for the driver to reply with a timeout error before sending a new command (i.e. a start poll command if constant polling is on). Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: digital: Set the command pending flagThierry Escande
There is a flag in the command structure indicating that this command is pending. It was checked before sending the command to not send the same command twice but it was actually never set. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: digital: Call pending command callbacks at device unregisterThierry Escande
With this patch, when freeing the command queue in the module unregister function, the callbacks of the commands still queued are called with a ENODEV error. This gives a chance to the command issuer to free any memory it could have allocate. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: digital: Rework error handling in DEP_RES responseThierry Escande
The Digital Protocol stack used to send a NACK frame whatever the error type it receives in digital_in_recv_dep_res(). It actually should only send a NACK frame on CRC or parity check errors or on any transmission error if a NACK frame was previously sent. Existing drivers used to send EIO error for this kind of issues so this patch limits sending of NACK frames on EIO errors. All other errors will be reported to the upper layers. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: digital: Fix a memory leak in NFC-F listening modeThierry Escande
When configured as a target listening for a SENSF_REQ poll command, a nfcid2 array was allocated for no reason leading to a memory leak. The nfcid2 is sent by the target in the SENSF_RES reply. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: llcp: Fix 2 memory leaksThierry Escande
Once copied into the sk_buff data area using llcp_add_tlv(), the allocated TLVs must be freed. With this patch nfc_llcp_send_connect() and nfc_llcp_send_cc() don't return immediately on success and now free the allocated TLVs. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-06NFC: llcp: Fix usage of llcp_add_tlv()Thierry Escande
In functions using llcp_add_tlv(), a skb pointer could be set to NULL and then reuse afterward. With this patch, the skb pointer returned by llcp_add_tlv() is ignored since it can only be the passed skb pointer or NULL when the passed TLV is NULL. There is also no need to check for the TLV pointer as this is done by llcp_add_tlv(). Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04NFC: llcp: Use dynamic debug for hex dumpThierry Escande
LLCP skb tx and rx functions now use print_hex_dump_debug() making these verbose traces controllable using dynamic debug. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04NFC: digital: Add a delay between poll cyclesThierry Escande
This replaces the polling work struct with a delayed work struct and add a 10 ms delay between 2 poll cycles. This avoids to flood the device with 'switch off'/'switch on' commands. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04NFC: hci: delete unused nfc_llc_get_rx_head_tail_room()Denys Vlasenko
It used to be EXPORTed, but then EXPORT usage was cleaned up (in 2012), without noticing that the function has no users at all (and curiously, never had any users). Delete it. While at it, remove non-static "inline" hints on nearby functions: these hints don't work across compilation units anyway, and these functions are not used in their .c file, thus they are never inlined. IOW: "inline" here does not help in any way. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Samuel Ortiz <sameo@linux.intel.com> CC: Christophe Ricard <christophe.ricard@gmail.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Add nci_nfcc_loopback to the nci coreChristophe Ricard
For test purpose, provide the generic nci loopback function. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Add an additional parameter to identify a connection idChristophe Ricard
According to NCI specification, destination type and destination specific parameters shall uniquely identify a single destination for the Logical Connection. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Fix nci_core_conn_closeChristophe Ricard
nci_core_conn_close was not retrieving a conn_info using the correct connection id. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Fix nci_core_conn_create to allowing empty destinationChristophe Ricard
NCI_CORE_CONN_CREATE may not have any destination type parameter. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-02-25NFC: Close a race condition in llcp_sock_getname()Cong Wang
llcp_sock_getname() checks llcp_sock->dev to make sure llcp_sock is already connected or bound, however, we could be in the middle of llcp_sock_bind() where llcp_sock->dev is bound and llcp_sock->service_name_len is set, but llcp_sock->service_name is not, in this case we would lead to copy some bytes from a NULL pointer. Just lock the sock since this is not a hot path anyway. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-02-25NFC: Use GFP_USER for user-controlled kmallocCong Wang
These two functions are called in sendmsg path, and the 'len' is passed from user-space, so we should not allow malicious users to OOM kernel on purpose. Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-01-27NFC: nci: Remove dead codePeter Hurley
The N_NCI ldisc does not define a flush_buffer() ldisc method, so the check when opening the ldisc is always false. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-04Merge tag 'nfc-next-4.5-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.5 pull request This is the first NFC pull request for 4.5 and it brings: - A new driver for the STMicroelectronics ST95HF NFC chipset. The ST95HF is an NFC digital transceiver with an embedded analog front-end and as such relies on the Linux NFC digital implementation. This is the 3rd user of the NFC digital stack. - ACPI support for the ST st-nci and st21nfca drivers. - A small improvement for the nfcsim driver, as we can now tune the Rx delay through sysfs. - A bunch of minor cleanups and small fixes from Christophe Ricard, for a few drivers and the NFC core code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-29NFC: nci: memory leak in nci_core_conn_create()Dan Carpenter
I've moved the check for "number_destination_params" forward a few lines to avoid leaking "cmd". Fixes: caa575a86ec1 ('NFC: nci: fix possible crash in nci_core_conn_create') Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: netlink: HCI event connectivity implementationChristophe Ricard
Add support for missing HCI event EVT_CONNECTIVITY and forward it to userspace. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: nci: Fix error check of nci_hci_create_pipe() resultChristophe Ricard
net/nfc/nci/hci.c: In function nci_hci_connect_gate : net/nfc/nci/hci.c:679: warning: comparison is always false due to limited range of data type In case of error, nci_hci_create_pipe() returns NCI_HCI_INVALID_PIPE, and not a negative error code. Correct the check to fix this. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: digital: Add Type4A tags supportShikha Singh
The definition of DIGITAL_PROTO_NFCA_RF_TECH is modified to support ISO14443 Type4A tags. Without this change it is not possible to start polling for ISO14443 Type4A tags from the initiator side. Signed-off-by: Shikha Singh <shikha.singh@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-01net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATAEric Dumazet
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28NFC: nci: non-static functions can not be inlineRobert Dolca
This fixes a build error that seems to be toochain dependent (Not seen with gcc v5.1): In file included from net/nfc/nci/rsp.c:36:0: net/nfc/nci/rsp.c: In function ‘nci_rsp_packet’: include/net/nfc/nci_core.h:355:12: error: inlining failed in call to always_inline ‘nci_prop_rsp_packet’: function body not available inline int nci_prop_rsp_packet(struct nci_dev *ndev, __u16 opcode, Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: allow spi driver to choose transfer clockVincent Cuissard
In some cases low level drivers might want to update the SPI transfer clock (e.g. during firmware download). This patch adds this support. Without any modification the driver will use the default SPI clock (from pdata or device tree). Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: move generic spi driver to a moduleVincent Cuissard
SPI driver should be a module. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: export nci_send_frame and nci_send_cmd functionVincent Cuissard
Export nci_send_frame and nci_send_cmd symbols to allow drivers to use it. This is needed for example if NCI is used during firmware download phase. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add support for proprietary commandsChristophe Ricard
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add few code style fixesChristophe Ricard
Add some few code style fixes. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Create pipe on specific gate in nci_hci_connect_gateChristophe Ricard
Some gates might need to have their pipes explicitly created. Add a call to nci_hci_create_pipe in nci_hci_connect_gate for every gate that is different than NCI_HCI_LINK_MGMT_GATE or NCI_HCI_ADMIN_GATE. In case of an error when opening a pipe, like in hci layer, delete the pipe if it was created. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Call nci_hci_clear_all_pipes at HCI initial activation.Christophe Ricard
When session_id is filled to 0xff, the pipe configuration is probably incorrect and needs to be cleared. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: add nci_hci_clear_all_pipes functionsChristophe Ricard
nci_hci_clear_all_pipes might be use full in some cases for example after a firmware update. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: extract pipe value using NCI_HCP_MSG_GET_PIPEChristophe Ricard
When receiving data in nci_hci_msg_rx_work, extract pipe value using NCI_HCP_MSG_GET_PIPE macro. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix improper management of HCI return codeChristophe Ricard
When sending HCI data over NCI, HCI return code is part of the NCI data. In order to get correctly the HCI return code, we assume the NCI communication is successful and extract the return code for the nci_hci functions return code. This is done because nci_to_errno does not match hci return code value. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix incorrect data chaining when sending dataChristophe Ricard
When sending HCI data over NCI, cmd information should be present only on the first packet. Each packet shall be specifically allocated and sent to the NCI layer. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: add nci_get_conn_info_by_id functionRobert Dolca
This functin takes as a parameter a pointer to the nci_dev struct and the first byte from the values of the first domain specific parameter that was used for the connection creation. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>