summaryrefslogtreecommitdiff
path: root/net/openvswitch/flow.h
AgeCommit message (Collapse)Author
2019-03-12openvswitch: convert to kvmallocKent Overstreet
Patch series "generic radix trees; drop flex arrays". This patch (of 7): There was no real need for this code to be using flexarrays, it's just implementing a hash table - ideally it would be using rhashtables, but that conversion would be significantly more complicated. Link: http://lkml.kernel.org/r/20181217131929.11727-2-kent.overstreet@gmail.com Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Paris <eparis@parisplace.org> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-08OVS: remove use of VLAN_TAG_PRESENTMichał Mirosław
This is a minimal change to allow removing of VLAN_TAG_PRESENT. It leaves OVS unable to use CFI bit, as fixing this would need a deeper surgery involving userspace interface. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08openvswitch: enable NSH supportYi Yang
v16->17 - Fixed disputed check code: keep them in nsh_push and nsh_pop but also add them in __ovs_nla_copy_actions v15->v16 - Add csum recalculation for nsh_push, nsh_pop and set_nsh pointed out by Pravin - Move nsh key into the union with ipv4 and ipv6 and add check for nsh key in match_validate pointed out by Pravin - Add nsh check in validate_set and __ovs_nla_copy_actions v14->v15 - Check size in nsh_hdr_from_nlattr - Fixed four small issues pointed out By Jiri and Eric v13->v14 - Rename skb_push_nsh to nsh_push per Dave's comment - Rename skb_pop_nsh to nsh_pop per Dave's comment v12->v13 - Fix NSH header length check in set_nsh v11->v12 - Fix missing changes old comments pointed out - Fix new comments for v11 v10->v11 - Fix the left three disputable comments for v9 but not fixed in v10. v9->v10 - Change struct ovs_key_nsh to struct ovs_nsh_key_base base; __be32 context[NSH_MD1_CONTEXT_SIZE]; - Fix new comments for v9 v8->v9 - Fix build error reported by daily intel build because nsh module isn't selected by openvswitch v7->v8 - Rework nested value and mask for OVS_KEY_ATTR_NSH - Change pop_nsh to adapt to nsh kernel module - Fix many issues per comments from Jiri Benc v6->v7 - Remove NSH GSO patches in v6 because Jiri Benc reworked it as another patch series and they have been merged. - Change it to adapt to nsh kernel module added by NSH GSO patch series v5->v6 - Fix the rest comments for v4. - Add NSH GSO support for VxLAN-gpe + NSH and Eth + NSH. v4->v5 - Fix many comments by Jiri Benc and Eric Garver for v4. v3->v4 - Add new NSH match field ttl - Update NSH header to the latest format which will be final format and won't change per its author's confirmation. - Fix comments for v3. v2->v3 - Change OVS_KEY_ATTR_NSH to nested key to handle length-fixed attributes and length-variable attriubte more flexibly. - Remove struct ovs_action_push_nsh completely - Add code to handle nested attribute for SET_MASKED - Change PUSH_NSH to use the nested OVS_KEY_ATTR_NSH to transfer NSH header data. - Fix comments and coding style issues by Jiri and Eric v1->v2 - Change encap_nsh and decap_nsh to push_nsh and pop_nsh - Dynamically allocate struct ovs_action_push_nsh for length-variable metadata. OVS master and 2.8 branch has merged NSH userspace patch series, this patch is to enable NSH support in kernel data path in order that OVS can support NSH in compat mode by porting this. Signed-off-by: Yi Yang <yi.y.yang@intel.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Eric Garver <e@erig.me> Acked-by: Pravin Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19openvswitch: Optimize operations for OvS flow_stats.Tonghao Zhang
When calling the flow_free() to free the flow, we call many times (cpu_possible_mask, eg. 128 as default) cpumask_next(). That will take up our CPU usage if we call the flow_free() frequently. When we put all packets to userspace via upcall, and OvS will send them back via netlink to ovs_packet_cmd_execute(will call flow_free). The test topo is shown as below. VM01 sends TCP packets to VM02, and OvS forward packtets. When testing, we use perf to report the system performance. VM01 --- OvS-VM --- VM02 Without this patch, perf-top show as below: The flow_free() is 3.02% CPU usage. 4.23% [kernel] [k] _raw_spin_unlock_irqrestore 3.62% [kernel] [k] __do_softirq 3.16% [kernel] [k] __memcpy 3.02% [kernel] [k] flow_free 2.42% libc-2.17.so [.] __memcpy_ssse3_back 2.18% [kernel] [k] copy_user_generic_unrolled 2.17% [kernel] [k] find_next_bit When applied this patch, perf-top show as below: Not shown on the list anymore. 4.11% [kernel] [k] _raw_spin_unlock_irqrestore 3.79% [kernel] [k] __do_softirq 3.46% [kernel] [k] __memcpy 2.73% libc-2.17.so [.] __memcpy_ssse3_back 2.25% [kernel] [k] copy_user_generic_unrolled 1.89% libc-2.17.so [.] _int_malloc 1.53% ovs-vswitchd [.] xlate_actions With this patch, the TCP throughput(we dont use Megaflow Cache + Microflow Cache) between VMs is 1.18Gbs/sec up to 1.30Gbs/sec (maybe ~10% performance imporve). This patch adds cpumask struct, the cpu_used_mask stores the cpu_id that the flow used. And we only check the flow_stats on the cpu we used, and it is unncessary to check all possible cpu when getting, cleaning, and updating the flow_stats. Adding the cpu_used_mask to sw_flow struct does’t increase the cacheline number. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09openvswitch: Pack struct sw_flow_key.Jarno Rajahalme
struct sw_flow_key has two 16-bit holes. Move the most matched conntrack match fields there. In some typical cases this reduces the size of the key that needs to be hashed into half and into one cache line. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09openvswitch: Add original direction conntrack tuple to sw_flow_key.Jarno Rajahalme
Add the fields of the conntrack original direction 5-tuple to struct sw_flow_key. The new fields are initially marked as non-existent, and are populated whenever a conntrack action is executed and either finds or generates a conntrack entry. This means that these fields exist for all packets that were not rejected by conntrack as untrackable. The original tuple fields in the sw_flow_key are filled from the original direction tuple of the conntrack entry relating to the current packet, or from the original direction tuple of the master conntrack entry, if the current conntrack entry has a master. Generally, expected connections of connections having an assigned helper (e.g., FTP), have a master conntrack entry. The main purpose of the new conntrack original tuple fields is to allow matching on them for policy decision purposes, with the premise that the admissibility of tracked connections reply packets (as well as original direction packets), and both direction packets of any related connections may be based on ACL rules applying to the master connection's original direction 5-tuple. This also makes it easier to make policy decisions when the actual packet headers might have been transformed by NAT, as the original direction 5-tuple represents the packet headers before any such transformation. When using the original direction 5-tuple the admissibility of return and/or related packets need not be based on the mere existence of a conntrack entry, allowing separation of admission policy from the established conntrack state. While existence of a conntrack entry is required for admission of the return or related packets, policy changes can render connections that were initially admitted to be rejected or dropped afterwards. If the admission of the return and related packets was based on mere conntrack state (e.g., connection being in an established state), a policy change that would make the connection rejected or dropped would need to find and delete all conntrack entries affected by such a change. When using the original direction 5-tuple matching the affected conntrack entries can be allowed to time out instead, as the established state of the connection would not need to be the basis for packet admission any more. It should be noted that the directionality of related connections may be the same or different than that of the master connection, and neither the original direction 5-tuple nor the conntrack state bits carry this information. If needed, the directionality of the master connection can be stored in master's conntrack mark or labels, which are automatically inherited by the expected related connections. The fact that neither ARP nor ND packets are trackable by conntrack allows mutual exclusion between ARP/ND and the new conntrack original tuple fields. Hence, the IP addresses are overlaid in union with ARP and ND fields. This allows the sw_flow_key to not grow much due to this patch, but it also means that we must be careful to never use the new key fields with ARP or ND packets. ARP is easy to distinguish and keep mutually exclusive based on the ethernet type, but ND being an ICMPv6 protocol requires a bit more attention. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: add mac_proto field to the flow keyJiri Benc
Use a hole in the structure. We support only Ethernet so far and will add a support for L2-less packets shortly. We could use a bool to indicate whether the Ethernet header is present or not but the approach with the mac_proto field is more generic and occupies the same number of bytes in the struct, while allowing later extensibility. It also makes the code in the next patches more self explaining. It would be nice to use ARPHRD_ constants but those are u16 which would be waste. Thus define our own constants. Another upside of this is that we can overload this new field to also denote whether the flow key is valid. This has the advantage that on refragmentation, we don't have to reparse the packet but can rely on the stored eth.type. This is especially important for the next patches in this series - instead of adding another branch for L2-less packets before calling ovs_fragment, we can just remove all those branches completely. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18openvswitch: use percpu flow statsThadeu Lima de Souza Cascardo
Instead of using flow stats per NUMA node, use it per CPU. When using megaflows, the stats lock can be a bottleneck in scalability. On a E5-2690 12-core system, usual throughput went from ~4Mpps to ~15Mpps when forwarding between two 40GbE ports with a single flow configured on the datapath. This has been tested on a system with possible CPUs 0-7,16-23. After module removal, there were no corruption on the slab cache. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Cc: pravin shelar <pshelar@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributesEric Garver
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes. This is based on Thomas F Herbert's original v20 patch. I made some small clean ups and bug fixes. Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use itDaniel Borkmann
eBPF defines this as BPF_TUNLEN_MAX and OVS just uses the hard-coded value inside struct sw_flow_key. Thus, add and use IP_TUNNEL_OPTS_MAX for this, which makes the code a bit more generic and allows to remove BPF_TUNLEN_MAX from eBPF code. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: add tunnel protocol to sw_flow_keyJiri Benc
Store tunnel protocol (AF_INET or AF_INET6) in sw_flow_key. This field now also acts as an indicator whether the flow contains tunnel data (this was previously indicated by tun_key.u.ipv4.dst being set but with IPv6 addresses in an union with IPv4 ones this won't work anymore). The new field was added to a hole in sw_flow_key. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05openvswitch: Rename LABEL->LABELSJoe Stringer
Conntrack LABELS (plural) are exposed by conntrack; rename the OVS name for these to be consistent with conntrack. Fixes: c2ac667 "openvswitch: Allow matching on conntrack label" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Allow matching on conntrack labelJoe Stringer
Allow matching and setting the ct_label field. As with ct_mark, this is populated by executing the CT action. The label field may be modified by specifying a label and mask nested under the CT action. It is stored as metadata attached to the connection. Label modification occurs after lookup, and will only persist when the conntrack entry is committed by providing the COMMIT flag to the CT action. Labels are currently fixed to 128 bits in size. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Allow matching on conntrack markJoe Stringer
Allow matching and setting the ct_mark field. As with ct_state and ct_zone, these fields are populated when the CT action is executed. To write to this field, a value and mask can be specified as a nested attribute under the CT action. This data is stored with the conntrack entry, and is executed after the lookup occurs for the CT action. The conntrack entry itself must be committed using the COMMIT flag in the CT action flags for this change to persist. Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Add conntrack actionJoe Stringer
Expose the kernel connection tracker via OVS. Userspace components can make use of the CT action to populate the connection state (ct_state) field for a flow. This state can be subsequently matched. Exposed connection states are OVS_CS_F_*: - NEW (0x01) - Beginning of a new connection. - ESTABLISHED (0x02) - Part of an existing connection. - RELATED (0x04) - Related to an established connection. - INVALID (0x20) - Could not track the connection for this packet. - REPLY_DIR (0x40) - This packet is in the reply direction for the flow. - TRACKED (0x80) - This packet has been sent through conntrack. When the CT action is executed by itself, it will send the packet through the connection tracker and populate the ct_state field with one or more of the connection state flags above. The CT action will always set the TRACKED bit. When the COMMIT flag is passed to the conntrack action, this specifies that information about the connection should be stored. This allows subsequent packets for the same (or related) connections to be correlated with this connection. Sending subsequent packets for the connection through conntrack allows the connection tracker to consider the packets as ESTABLISHED, RELATED, and/or REPLY_DIR. The CT action may optionally take a zone to track the flow within. This allows connections with the same 5-tuple to be kept logically separate from connections in other zones. If the zone is specified, then the "ct_zone" match field will be subsequently populated with the zone id. IP fragments are handled by transparently assembling them as part of the CT action. The maximum received unit (MRU) size is tracked so that refragmentation can occur during output. IP frag handling contributed by Andy Zhou. Based on original design by Justin Pettit. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Serialize acts with original netlink lenJoe Stringer
Previously, we used the kernel-internal netlink actions length to calculate the size of messages to serialize back to userspace. However,the sw_flow_actions may not be formatted exactly the same as the actions on the wire, so store the original actions length when de-serializing and re-use the original length when serializing. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: Make tunnel set action attach a metadata dstThomas Graf
Utilize the new metadata dst to attach encapsulation instructions to the skb. The existing egress_tun_info via the OVS_CB() is left in place until all tunnel vports have been converted to the new method. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21ip_tunnel: Make ovs_tunnel_info and ovs_key_ipv4_tunnel genericThomas Graf
Rename the tunnel metadata data structures currently internal to OVS and make them generic for use by all IP tunnels. Both structures are kernel internal and will stay that way. Their members are exposed to user space through individual Netlink attributes by OVS. It will therefore be possible to extend/modify these structures without affecting user ABI. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Add support for unique flow IDs.Joe Stringer
Previously, flows were manipulated by userspace specifying a full, unmasked flow key. This adds significant burden onto flow serialization/deserialization, particularly when dumping flows. This patch adds an alternative way to refer to flows using a variable-length "unique flow identifier" (UFID). At flow setup time, userspace may specify a UFID for a flow, which is stored with the flow and inserted into a separate table for lookup, in addition to the standard flow table. Flows created using a UFID must be fetched or deleted using the UFID. All flow dump operations may now be made more terse with OVS_UFID_F_* flags. For example, the OVS_UFID_F_OMIT_KEY flag allows responses to omit the flow key from a datapath operation if the flow has a corresponding UFID. This significantly reduces the time spent assembling and transacting netlink messages. With all OVS_UFID_F_OMIT_* flags enabled, the datapath only returns the UFID and statistics for each flow during flow dump, increasing ovs-vswitchd revalidator performance by 40% or more. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15openvswitch: Rename GENEVE_TUN_OPTS() to TUN_METADATA_OPTS()Thomas Graf
Also factors out Geneve validation code into a new separate function validate_and_copy_geneve_opts(). A subsequent patch will introduce VXLAN options. Rename the existing GENEVE_TUN_OPTS() to reflect its extended purpose of carrying generic tunnel metadata options. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-09openvswitch: Add support for OVS_FLOW_ATTR_PROBE.Jarno Rajahalme
This new flag is useful for suppressing error logging while probing for datapath features using flow commands. For backwards compatibility reasons the commands are executed normally, but error logging is suppressed. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-09openvswitch: Constify various function argumentsThomas Graf
Help produce better optimized code. Signed-off-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-09openvswitch: Extend packet attribute for egress tunnel infoWenyu Zhang
OVS vswitch has extended IPFIX exporter to export tunnel headers to improve network visibility. To export this information userspace needs to know egress tunnel for given packet. By extending packet attributes datapath can export egress tunnel info for given packet. So that userspace can ask for egress tunnel info in userspace action. This information is used to build IPFIX data for given flow. Signed-off-by: Wenyu Zhang <wenyuz@vmware.com> Acked-by: Romain Lenglet <rlenglet@vmware.com> Acked-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Add basic MPLS support to kernelSimon Horman
Allow datapath to recognize and extract MPLS labels into flow keys and execute actions which push, pop, and set labels on packets. Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer. Cc: Ravi K <rkerur@gmail.com> Cc: Leo Alterman <lalterman@nicira.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Joe Stringer <joe@wand.net.nz> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-10-06openvswitch: Add support for Geneve tunneling.Jesse Gross
The Openvswitch implementation is completely agnostic to the options that are in use and can handle newly defined options without further work. It does this by simply matching on a byte array of options and allowing userspace to setup flows on this array. Signed-off-by: Jesse Gross <jesse@nicira.com> Singed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@noironetworks.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Wrap struct ovs_key_ipv4_tunnel in a new structure.Jesse Gross
Currently, the flow information that is matched for tunnels and the tunnel data passed around with packets is the same. However, as additional information is added this is not necessarily desirable, as in the case of pointers. This adds a new structure for tunnel metadata which currently contains only the existing struct. This change is purely internal to the kernel since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version of OVS_KEY_ATTR_TUNNEL that is translated at flow setup. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15openvswitch: Add recirc and hash action.Andy Zhou
Recirc action allows a packet to reenter openvswitch processing. currently openvswitch lookup flow for packet received and execute set of actions on that packet, with help of recirc action we can process/modify the packet and recirculate it back in openvswitch for another pass. OVS hash action calculates 5-tupple hash and set hash in flow-key hash. This can be used along with recirculation for distributing packets among different ports for bond devices. For example: OVS bonding can use following actions: Match on: bond flow; Action: hash, recirc(id) Match on: recirc-id == id and hash lower bits == a; Action: output port_bond_a Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-09-15openvswitch: Use tun_key only for egress tunnel path.Pravin B Shelar
Currently tun_key is used for passing tunnel information on ingress and egress path, this cause confusion. Following patch removes its use on ingress path make it egress only parameter. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
2014-09-15openvswitch: refactor ovs flow extract API.Pravin B Shelar
OVS flow extract is called on packet receive or packet execute code path. Following patch defines separate API for extracting flow-key in packet execute code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
2014-06-29openvswitch: Fix tracking of flags seen in TCP flows.Ben Pfaff
Flow statistics need to take into account the TCP flags from the packet currently being processed (in 'key'), not the TCP flags matched by the flow found in the kernel flow table (in 'flow'). This bug made the Open vSwitch userspace fin_timeout action have no effect in many cases. This bug is introduced by commit 88d73f6c411ac2f0578 (openvswitch: Use TCP flags in the flow key for stats.) Reported-by: Len Gao <leng@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22openvswitch: Fix ovs_flow_stats_get/clear RCU dereference.Jarno Rajahalme
For ovs_flow_stats_get() using ovsl_dereference() was wrong, since flow dumps call this with RCU read lock. ovs_flow_stats_clear() is always called with ovs_mutex, so can use ovsl_dereference(). Also, make the ovs_flow_stats_get() 'flow' argument const to make later patches cleaner. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22openvswitch: Compact sw_flow_key.Jarno Rajahalme
Minimize padding in sw_flow_key and move 'tp' top the main struct. These changes simplify code when accessing the transport port numbers and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit systems (128->120 bytes). These changes also make the keys for IPv4 packets to fit in one cache line. There is a valid concern for safety of packing the struct ovs_key_ipv4_tunnel, as it would be possible to take the address of the tun_id member as a __be64 * which could result in unaligned access in some systems. However: - sw_flow_key itself is 64-bit aligned, so the tun_id within is always 64-bit aligned. - We never make arrays of ovs_key_ipv4_tunnel (which would force every second tun_key to be misaligned). - We never take the address of the tun_id in to a __be64 *. - Whereever we use struct ovs_key_ipv4_tunnel outside the sw_flow_key, it is in stack (on tunnel input functions), where compiler has full control of the alignment. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-16openvswitch: Per NUMA node flow stats.Jarno Rajahalme
Keep kernel flow stats for each NUMA node rather than each (logical) CPU. This avoids using the per-CPU allocator and removes most of the kernel-side OVS locking overhead otherwise on the top of perf reports and allows OVS to scale better with higher number of threads. With 9 handlers and 4 revalidators netperf TCP_CRR test flow setup rate doubles on a server with two hyper-threaded physical CPUs (16 logical cores each) compared to the current OVS master. Tested with non-trivial flow table with a TCP port match rule forcing all new connections with unique port numbers to OVS userspace. The IP addresses are still wildcarded, so the kernel flows are not considered as exact match 5-tuple flows. This type of flows can be expected to appear in large numbers as the result of more effective wildcarding made possible by improvements in OVS userspace flow classifier. Perf results for this test (master): Events: 305K cycles + 8.43% ovs-vswitchd [kernel.kallsyms] [k] mutex_spin_on_owner + 5.64% ovs-vswitchd [kernel.kallsyms] [k] __ticket_spin_lock + 4.75% ovs-vswitchd ovs-vswitchd [.] find_match_wc + 3.32% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_lock + 2.61% ovs-vswitchd [kernel.kallsyms] [k] pcpu_alloc_area + 2.19% ovs-vswitchd ovs-vswitchd [.] flow_hash_in_minimask_range + 2.03% swapper [kernel.kallsyms] [k] intel_idle + 1.84% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_unlock + 1.64% ovs-vswitchd ovs-vswitchd [.] classifier_lookup + 1.58% ovs-vswitchd libc-2.15.so [.] 0x7f4e6 + 1.07% ovs-vswitchd [kernel.kallsyms] [k] memset + 1.03% netperf [kernel.kallsyms] [k] __ticket_spin_lock + 0.92% swapper [kernel.kallsyms] [k] __ticket_spin_lock ... And after this patch: Events: 356K cycles + 6.85% ovs-vswitchd ovs-vswitchd [.] find_match_wc + 4.63% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_lock + 3.06% ovs-vswitchd [kernel.kallsyms] [k] __ticket_spin_lock + 2.81% ovs-vswitchd ovs-vswitchd [.] flow_hash_in_minimask_range + 2.51% ovs-vswitchd libpthread-2.15.so [.] pthread_mutex_unlock + 2.27% ovs-vswitchd ovs-vswitchd [.] classifier_lookup + 1.84% ovs-vswitchd libc-2.15.so [.] 0x15d30f + 1.74% ovs-vswitchd [kernel.kallsyms] [k] mutex_spin_on_owner + 1.47% swapper [kernel.kallsyms] [k] intel_idle + 1.34% ovs-vswitchd ovs-vswitchd [.] flow_hash_in_minimask + 1.33% ovs-vswitchd ovs-vswitchd [.] rule_actions_unref + 1.16% ovs-vswitchd ovs-vswitchd [.] hindex_node_with_hash + 1.16% ovs-vswitchd ovs-vswitchd [.] do_xlate_actions + 1.09% ovs-vswitchd ovs-vswitchd [.] ofproto_rule_ref + 1.01% netperf [kernel.kallsyms] [k] __ticket_spin_lock ... There is a small increase in kernel spinlock overhead due to the same spinlock being shared between multiple cores of the same physical CPU, but that is barely visible in the netperf TCP_CRR test performance (maybe ~1% performance drop, hard to tell exactly due to variance in the test results), when testing for kernel module throughput (with no userspace activity, handful of kernel flows). On flow setup, a single stats instance is allocated (for the NUMA node 0). As CPUs from multiple NUMA nodes start updating stats, new NUMA-node specific stats instances are allocated. This allocation on the packet processing code path is made to never block or look for emergency memory pools, minimizing the allocation latency. If the allocation fails, the existing preallocated stats instance is used. Also, if only CPUs from one NUMA-node are updating the preallocated stats instance, no additional stats instances are allocated. This eliminates the need to pre-allocate stats instances that will not be used, also relieving the stats reader from the burden of reading stats that are never used. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16openvswitch: Remove 5-tuple optimization.Jarno Rajahalme
The 5-tuple optimization becomes unnecessary with a later per-NUMA node stats patch. Remove it first to make the changes easier to grasp. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Per cpu flow stats.Pravin B Shelar
With mega flow implementation ovs flow can be shared between multiple CPUs which makes stats updates highly contended operation. This patch uses per-CPU stats in cases where a flow is likely to be shared (if there is a wildcard in the 5-tuple and therefore likely to be spread by RSS). In other situations, it uses the current strategy, saving memory and allocation time. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Shrink sw_flow_mask by 8 bytes (64-bit) or 4 bytes (32-bit).Ben Pfaff
We won't normally have a ton of flow masks but using a size_t to store values no bigger than sizeof(struct sw_flow_key) seems excessive. This reduces sw_flow_key_range and sw_flow_mask by 4 bytes on 32-bit systems. On 64-bit systems it shrinks sw_flow_key_range by 12 bytes but sw_flow_mask only by 8 bytes due to padding. Compile tested only. Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01openvswitch: TCP flags matching support.Jarno Rajahalme
tcp_flags=flags/mask Bitwise match on TCP flags. The flags and mask are 16-bit num‐ bers written in decimal or in hexadecimal prefixed by 0x. Each 1-bit in mask requires that the corresponding bit in port must match. Each 0-bit in mask causes the corresponding bit to be ignored. TCP protocol currently defines 9 flag bits, and additional 3 bits are reserved (must be transmitted as zero), see RFCs 793, 3168, and 3540. The flag bits are, numbering from the least significant bit: 0: FIN No more data from sender. 1: SYN Synchronize sequence numbers. 2: RST Reset the connection. 3: PSH Push function. 4: ACK Acknowledgement field significant. 5: URG Urgent pointer field significant. 6: ECE ECN Echo. 7: CWR Congestion Windows Reduced. 8: NS Nonce Sum. 9-11: Reserved. 12-15: Not matchable, must be zero. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01openvswitch: Widen TCP flags handling.Jarno Rajahalme
Widen TCP flags handling from 7 bits (uint8_t) to 12 bits (uint16_t). The kernel interface remains at 8 bits, which makes no functional difference now, as none of the higher bits is currently of interest to the userspace. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-10-03openvswitch: Restructure datapath.c and flow.cPravin B Shelar
Over the time datapath.c and flow.c has became pretty large files. Following patch restructures functionality of component into three different components: flow.c: contains flow extract. flow_netlink.c: netlink flow api. flow_table.c: flow table api. This patch restructures code without changing logic. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-09-05openvswitch: Fix alignment of struct sw_flow_key.Jesse Gross
sw_flow_key alignment was declared as " __aligned(__alignof__(long))". However, this breaks on the m68k architecture where long is 32 bit in size but 16 bit aligned by default. This aligns to the size of a long to ensure that we can always do comparsions in full long-sized chunks. It also adds an additional build check to catch any reduction in alignment. CC: Andy Zhou <azhou@nicira.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27openvswitch: optimize flow compare and mask functionsAndy Zhou
Make sure the sw_flow_key structure and valid mask boundaries are always machine word aligned. Optimize the flow compare and mask operations using machine word size operations. This patch improves throughput on average by 15% when CPU is the bottleneck of forwarding packets. This patch is inspired by ideas and code from a patch submitted by Peter Klausler titled "replace memcmp() with specialized comparator". However, The original patch only optimizes for architectures support unaligned machine word access. This patch optimizes for all architectures. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-26openvswitch: Rename key_len to key_endAndy Zhou
Key_end is a better name describing the ending boundary than key_len. Rename those variables to make it less confusing. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-26openvswitch: Add SCTP supportJoe Stringer
This patch adds support for rewriting SCTP src,dst ports similar to the functionality already available for TCP/UDP. Rewriting SCTP ports is expensive due to double-recalculation of the SCTP checksums; this is performed to ensure that packets traversing OVS with invalid checksums will continue to the destination with any checksum corruption intact. Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-23openvswitch: Mega flow implementationAndy Zhou
Add wildcarded flow support in kernel datapath. Wildcarded flow can improve OVS flow set up performance by avoid sending matching new flows to the user space program. The exact performance boost will largely dependent on wildcarded flow hit rate. In case all new flows hits wildcard flows, the flow set up rate is within 5% of that of linux bridge module. Pravin has made significant contributions to this patch. Including API clean ups and bug fixes. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-06-19openvswitch: Add gre tunnel support.Pravin B Shelar
Add gre vport implementation. Most of gre protocol processing is pushed to gre module. It make use of gre demultiplexer therefore it can co-exist with linux device based gre tunnels. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Optimize flow key match for non tunnel flows.Pravin B Shelar
Following patch adds start offset for sw_flow-key, so that we can skip tunneling information in key for non-tunnel flows. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Expand action buffer size.Pravin B Shelar
MAX_ACTIONS_BUFSIZE limits action list size, set tunnel action needs extra space on action list, for now increase max actions list limit. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Add tunneling interface.Pravin B Shelar
Add ovs tunnel interface for set tunnel action for userspace. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19openvswitch: Copy individual actions.Pravin B Shelar
Rather than validating actions and then copying all actiaons in one block, following patch does same operation in single pass. This validate and copy action one by one. This is required for ovs tunneling patch. This patch does not change any functionality. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>