summaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)Author
2017-01-15openvswitch: maintain correct checksum state in conntrack actionsLance Richardson
When executing conntrack actions on skbuffs with checksum mode CHECKSUM_COMPLETE, the checksum must be updated to account for header pushes and pulls. Otherwise we get "hw csum failure" logs similar to this (ICMP packet received on geneve tunnel via ixgbe NIC): [ 405.740065] genev_sys_6081: hw csum failure [ 405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G I 4.10.0-rc3+ #1 [ 405.740108] Call Trace: [ 405.740110] <IRQ> [ 405.740113] dump_stack+0x63/0x87 [ 405.740116] netdev_rx_csum_fault+0x3a/0x40 [ 405.740118] __skb_checksum_complete+0xcf/0xe0 [ 405.740120] nf_ip_checksum+0xc8/0xf0 [ 405.740124] icmp_error+0x1de/0x351 [nf_conntrack_ipv4] [ 405.740132] nf_conntrack_in+0xe1/0x550 [nf_conntrack] [ 405.740137] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [ 405.740143] __ovs_ct_lookup+0x95/0x980 [openvswitch] [ 405.740145] ? netif_rx_internal+0x44/0x110 [ 405.740149] ovs_ct_execute+0x147/0x4b0 [openvswitch] [ 405.740153] do_execute_actions+0x22e/0xa70 [openvswitch] [ 405.740157] ovs_execute_actions+0x40/0x120 [openvswitch] [ 405.740161] ovs_dp_process_packet+0x84/0x120 [openvswitch] [ 405.740166] ovs_vport_receive+0x73/0xd0 [openvswitch] [ 405.740168] ? udp_rcv+0x1a/0x20 [ 405.740170] ? ip_local_deliver_finish+0x93/0x1e0 [ 405.740172] ? ip_local_deliver+0x6f/0xe0 [ 405.740174] ? ip_rcv_finish+0x3a0/0x3a0 [ 405.740176] ? ip_rcv_finish+0xdb/0x3a0 [ 405.740177] ? ip_rcv+0x2a7/0x400 [ 405.740180] ? __netif_receive_skb_core+0x970/0xa00 [ 405.740185] netdev_frame_hook+0xd3/0x160 [openvswitch] [ 405.740187] __netif_receive_skb_core+0x1dc/0xa00 [ 405.740194] ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe] [ 405.740197] __netif_receive_skb+0x18/0x60 [ 405.740199] netif_receive_skb_internal+0x40/0xb0 [ 405.740201] napi_gro_receive+0xcd/0x120 [ 405.740204] gro_cell_poll+0x57/0x80 [geneve] [ 405.740206] net_rx_action+0x260/0x3c0 [ 405.740209] __do_softirq+0xc9/0x28c [ 405.740211] irq_exit+0xd9/0xf0 [ 405.740213] do_IRQ+0x51/0xd0 [ 405.740215] common_interrupt+0x93/0x93 Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Lance Richardson <lrichard@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-27openvswitch: upcall: Fix vlan handling.pravin shelar
Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20openvswitch: Add a missing break statement.Jarno Rajahalme
Add a break statement to prevent fall-through from OVS_KEY_ATTR_ETHERNET to OVS_KEY_ATTR_TUNNEL. Without the break actions setting ethernet addresses fail to validate with log messages complaining about invalid tunnel attributes. Fixes: 0a6410fbde ("openvswitch: netlink: support L3 packets") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30openvswitch: Fix skb leak in IPv6 reassembly.Daniele Di Proietto
If nf_ct_frag6_gather() returns an error other than -EINPROGRESS, it means that we still have a reference to the skb. We should free it before returning from handle_fragments, as stated in the comment above. Fixes: daaa7d647f81 ("netfilter: ipv6: avoid nf_iterate recursion") CC: Florian Westphal <fw@strlen.de> CC: Pravin B Shelar <pshelar@ovn.org> CC: Joe Stringer <joe@ovn.org> Signed-off-by: Daniele Di Proietto <diproiettod@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18netns: make struct pernet_operations::id unsigned intAlexey Dobriyan
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains a second batch of Netfilter updates for your net-next tree. This includes a rework of the core hook infrastructure that improves Netfilter performance by ~15% according to synthetic benchmarks. Then, a large batch with ipset updates, including a new hash:ipmac set type, via Jozsef Kadlecsik. This also includes a couple of assorted updates. Regarding the core hook infrastructure rework to improve performance, using this simple drop-all packets ruleset from ingress: nft add table netdev x nft add chain netdev x y { type filter hook ingress device eth0 priority 0\; } nft add rule netdev x y drop And generating traffic through Jesper Brouer's samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh script using -i option. perf report shows nf_tables calls in its top 10: 17.30% kpktgend_0 [nf_tables] [k] nft_do_chain 15.75% kpktgend_0 [kernel.vmlinux] [k] __netif_receive_skb_core 10.39% kpktgend_0 [nf_tables_netdev] [k] nft_do_chain_netdev I'm measuring here an improvement of ~15% in performance with this patchset, so we got +2.5Mpps more. I have used my old laptop Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz 4-cores. This rework contains more specifically, in strict order, these patches: 1) Remove compile-time debugging from core. 2) Remove obsolete comments that predate the rcu era. These days it is well known that a Netfilter hook always runs under rcu_read_lock(). 3) Remove threshold handling, this is only used by br_netfilter too. We already have specific code to handle this from br_netfilter, so remove this code from the core path. 4) Deprecate NF_STOP, as this is only used by br_netfilter. 5) Place nf_state_hook pointer into xt_action_param structure, so this structure fits into one single cacheline according to pahole. This also implicit affects nftables since it also relies on the xt_action_param structure. 6) Move state->hook_entries into nf_queue entry. The hook_entries pointer is only required by nf_queue(), so we can store this in the queue entry instead. 7) use switch() statement to handle verdict cases. 8) Remove hook_entries field from nf_hook_state structure, this is only required by nf_queue, so store it in nf_queue_entry structure. 9) Merge nf_iterate() into nf_hook_slow() that results in a much more simple and readable function. 10) Handle NF_REPEAT away from the core, so far the only client is nf_conntrack_in() and we can restart the packet processing using a simple goto to jump back there when the TCP requires it. This update required a second pass to fix fallout, fix from Arnd Bergmann. 11) Set random seed from nft_hash when no seed is specified from userspace. 12) Simplify nf_tables expression registration, in a much smarter way to save lots of boiler plate code, by Liping Zhang. 13) Simplify layer 4 protocol conntrack tracker registration, from Davide Caratti. 14) Missing CONFIG_NF_SOCKET_IPV4 dependency for udp4_lib_lookup, due to recent generalization of the socket infrastructure, from Arnd Bergmann. 15) Then, the ipset batch from Jozsef, he describes it as it follows: * Cleanup: Remove extra whitespaces in ip_set.h * Cleanup: Mark some of the helpers arguments as const in ip_set.h * Cleanup: Group counter helper functions together in ip_set.h * struct ip_set_skbinfo is introduced instead of open coded fields in skbinfo get/init helper funcions. * Use kmalloc() in comment extension helper instead of kzalloc() because it is unnecessary to zero out the area just before explicit initialization. * Cleanup: Split extensions into separate files. * Cleanup: Separate memsize calculation code into dedicated function. * Cleanup: group ip_set_put_extensions() and ip_set_get_extensions() together. * Add element count to hash headers by Eric B Munson. * Add element count to all set types header for uniform output across all set types. * Count non-static extension memory into memsize calculation for userspace. * Cleanup: Remove redundant mtype_expire() arguments, because they can be get from other parameters. * Cleanup: Simplify mtype_expire() for hash types by removing one level of intendation. * Make NLEN compile time constant for hash types. * Make sure element data size is a multiple of u32 for the hash set types. * Optimize hash creation routine, exit as early as possible. * Make struct htype per ipset family so nets array becomes fixed size and thus simplifies the struct htype allocation. * Collapse same condition body into a single one. * Fix reported memory size for hash:* types, base hash bucket structure was not taken into account. * hash:ipmac type support added to ipset by Tomasz Chilinski. * Use setup_timer() and mod_timer() instead of init_timer() by Muhammad Falak R Wani, individually for the set type families. 16) Remove useless connlabel field in struct netns_ct, patch from Florian Westphal. 17) xt_find_table_lock() doesn't return ERR_PTR() anymore, so simplify {ip,ip6,arp}tables code that uses this. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: allow L3 netdev portsJiri Benc
Allow ARPHRD_NONE interfaces to be added to ovs bridge. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: add Ethernet push and pop actionsJiri Benc
It's not allowed to push Ethernet header in front of another Ethernet header. It's not allowed to pop Ethernet header if there's a vlan tag. This preserves the invariant that L3 packet never has a vlan tag. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: netlink: support L3 packetsJiri Benc
Extend the ovs flow netlink protocol to support L3 packets. Packets without OVS_KEY_ATTR_ETHERNET attribute specify L3 packets; for those, the OVS_KEY_ATTR_ETHERTYPE attribute is mandatory. Push/pop vlan actions are only supported for Ethernet packets. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: add processing of L3 packetsJiri Benc
Support receiving, extracting flow key and sending of L3 packets (packets without an Ethernet header). Note that even after this patch, non-Ethernet interfaces are still not allowed to be added to bridges. Similarly, netlink interface for sending and receiving L3 packets to/from user space is not in place yet. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: support MPLS push and pop for L3 packetsJiri Benc
Update Ethernet header only if there is one. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: pass mac_proto to ovs_vport_sendJiri Benc
We'll need it to alter packets sent to ARPHRD_NONE interfaces. Change do_output() to use the actual L2 header size of the packet when deciding on the minimum cutlen. The assumption here is that what matters is not the output interface hard_header_len but rather the L2 header of the particular packet. For example, ARPHRD_NONE tunnels that encapsulate Ethernet should get at least the Ethernet header. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: add mac_proto field to the flow keyJiri Benc
Use a hole in the structure. We support only Ethernet so far and will add a support for L2-less packets shortly. We could use a bool to indicate whether the Ethernet header is present or not but the approach with the mac_proto field is more generic and occupies the same number of bytes in the struct, while allowing later extensibility. It also makes the code in the next patches more self explaining. It would be nice to use ARPHRD_ constants but those are u16 which would be waste. Thus define our own constants. Another upside of this is that we can overload this new field to also denote whether the flow key is valid. This has the advantage that on refragmentation, we don't have to reparse the packet but can rely on the stored eth.type. This is especially important for the next patches in this series - instead of adding another branch for L2-less packets before calling ovs_fragment, we can just remove all those branches completely. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: use hard_header_len instead of hardcoded ETH_HLENJiri Benc
On tx, use hard_header_len while deciding whether to refragment or drop the packet. That way, all combinations are calculated correctly: * L2 packet going to L2 interface (the L2 header len is subtracted), * L2 packet going to L3 interface (the L2 header is included in the packet lenght), * L3 packet going to L3 interface. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03netfilter: handle NF_REPEAT from nf_conntrack_in()Pablo Neira Ayuso
NF_REPEAT is only needed from nf_conntrack_in() under a very specific case required by the TCP protocol tracker, we can handle this case without returning to the core hook path. Handling of NF_REPEAT from the nf_reinject() is left untouched. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in core net infraJarod Wilson
geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19openvswitch: remove unnecessary EXPORT_SYMBOLsJiri Benc
Some symbols exported to other modules are really used only by openvswitch.ko. Remove the exports. Tested by loading all 4 openvswitch modules, nothing breaks. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19openvswitch: remove unused functionsJiri Benc
ovs_vport_deferred_free is not used anywhere. It's the only caller of free_vport_rcu thus this one can be removed, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-10-13openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal devJiri Benc
The internal device does support 802.1AD offloading since 018c1dda5ff1 ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13openvswitch: fix vlan subtraction from packet lengthJiri Benc
When the packet has its vlan tag in skb->vlan_tci, the length of the VLAN header is not counted in skb->len. It doesn't make sense to subtract it. Fixes: 018c1dda5ff1 ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13openvswitch: vlan: remove wrong likely statementJiri Benc
This code is called whenever flow key is being extracted from the packet. The packet may be as likely vlan tagged as not. Fixes: 018c1dda5ff1 ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-12openvswitch: correctly fragment packet with mpls headersJiri Benc
If mpls headers were pushed to a defragmented packet, the refragmentation no longer works correctly after 48d2ab609b6b ("net: mpls: Fixups for GSO"). The network header has to be shifted after the mpls headers for the fragmentation and restored afterwards. Fixes: 48d2ab609b6b ("net: mpls: Fixups for GSO") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03openvswitch: use mpls_hdrJiri Benc
skb_mpls_header is equivalent to mpls_hdr now. Use the existing helper instead. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03openvswitch: mpls: set network header correctly on key extractJiri Benc
After the 48d2ab609b6b ("net: mpls: Fixups for GSO"), MPLS handling in openvswitch was changed to have network header pointing to the start of the MPLS headers and inner_network_header pointing after the MPLS headers. However, key_extract was missed by the mentioned commit, causing incorrect headers to be set when a MPLS packet just enters the bridge or after it is recirculated. Fixes: 48d2ab609b6b ("net: mpls: Fixups for GSO") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20openvswitch: avoid resetting flow key while installing new flow.pravin shelar
since commit commit db74a3335e0f6 ("openvswitch: use percpu flow stats") flow alloc resets flow-key. So there is no need to reset the flow-key again if OVS is using newly allocated flow-key. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20openvswitch: Fix Frame-size larger than 1024 bytes warning.pravin shelar
There is no need to declare separate key on stack, we can just use sw_flow->key to store the key directly. This commit fixes following warning: net/openvswitch/datapath.c: In function ‘ovs_flow_cmd_new’: net/openvswitch/datapath.c:1080:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18openvswitch: use percpu flow statsThadeu Lima de Souza Cascardo
Instead of using flow stats per NUMA node, use it per CPU. When using megaflows, the stats lock can be a bottleneck in scalability. On a E5-2690 12-core system, usual throughput went from ~4Mpps to ~15Mpps when forwarding between two 40GbE ports with a single flow configured on the datapath. This has been tested on a system with possible CPUs 0-7,16-23. After module removal, there were no corruption on the slab cache. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Cc: pravin shelar <pshelar@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18openvswitch: fix flow stats accounting when node 0 is not possibleThadeu Lima de Souza Cascardo
On a system with only node 1 as possible, all statistics is going to be accounted on node 0 as it will have a single writer. However, when getting and clearing the statistics, node 0 is not going to be considered, as it's not a possible node. Tested that statistics are not zero on a system with only node 1 possible. Also compile-tested with CONFIG_NUMA off. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-15openvswitch: avoid deferred execution of recirc actionsLance Richardson
The ovs kernel data path currently defers the execution of all recirc actions until stack utilization is at a minimum. This is too limiting for some packet forwarding scenarios due to the small size of the deferred action FIFO (10 entries). For example, broadcast traffic sent out more than 10 ports with recirculation results in packet drops when the deferred action FIFO becomes full, as reported here: http://openvswitch.org/pipermail/dev/2016-March/067672.html Since the current recursion depth is available (it is already tracked by the exec_actions_level pcpu variable), we can use it to determine whether to execute recirculation actions immediately (safe when recursion depth is low) or defer execution until more stack space is available. With this change, the deferred action fifo size becomes a non-issue for currently failing scenarios because it is no longer used when there are three or fewer recursions through ovs_execute_actions(). Suggested-by: Pravin Shelar <pshelar@ovn.org> Signed-off-by: Lance Richardson <lrichard@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10openvswitch: use alias for genetlink family namesThadeu Lima de Souza Cascardo
When userspace tries to create datapaths and the module is not loaded, it will simply fail. With this patch, the module will be automatically loaded. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributesEric Garver
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes. This is based on Thomas F Herbert's original v20 patch. I made some small clean ups and bug fixes. Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-04openvswitch: Free tmpl with tmpl_free.Joe Stringer
When an error occurs during conntrack template creation as part of actions validation, we need to free the template. Previously we've been using nf_ct_put() to do this, but nf_ct_tmpl_free() is more appropriate. Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30net: mpls: Fixups for GSODavid Ahern
As reported by Lennert the MPLS GSO code is failing to properly segment large packets. There are a couple of problems: 1. the inner protocol is not set so the gso segment functions for inner protocol layers are not getting run, and 2 MPLS labels for packets that use the "native" (non-OVS) MPLS code are not properly accounted for in mpls_gso_segment. The MPLS GSO code was added for OVS. It is re-using skb_mac_gso_segment to call the gso segment functions for the higher layer protocols. That means skb_mac_gso_segment is called twice -- once with the network protocol set to MPLS and again with the network protocol set to the inner protocol. This patch sets the inner skb protocol addressing item 1 above and sets the network_header and inner_network_header to mark where the MPLS labels start and end. The MPLS code in OVS is also updated to set the two network markers. >From there the MPLS GSO code uses the difference between the network header and the inner network header to know the size of the MPLS header that was pushed. It then pulls the MPLS header, resets the mac_len and protocol for the inner protocol and then calls skb_mac_gso_segment to segment the skb. Afterward the inner protocol segmentation is done the skb protocol is set to mpls for each segment and the network and mac headers restored. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10openvswitch: do not ignore netdev errors when creating tunnel vportsMartynas Pumputis
The creation of a tunnel vport (geneve, gre, vxlan) brings up a corresponding netdev, a multi-step operation which can fail. For example, changing a vxlan vport's netdev state to 'up' binds the vport's socket to a UDP port - if the binding fails (e.g. due to the port being in use), the error is currently ignored giving the appearance that the tunnel vport creation completed successfully. Signed-off-by: Martynas Pumputis <martynas@weave.works> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06OVS: Ignore negative headroom valueIan Wienand
net_device->ndo_set_rx_headroom (introduced in 871b642adebe300be2e50aa5f65a418510f636ec) says "Setting a negtaive value reset the rx headroom to the default value". It seems that the OVS implementation in 3a927bc7cf9d0fbe8f4a8189dd5f8440228f64e7 overlooked this and sets dev->needed_headroom unconditionally. This doesn't have an immediate effect, but can mess up later LL_RESERVED_SPACE calculations, such as done in net/ipv6/mcast.c:mld_newpack. For reference, this issue was found from a skb_panic raised there after the length calculations had given the wrong result. Note the other current users of this interface (drivers/net/tun.c:tun_set_headroom and drivers/net/veth.c:veth_set_rx_headroom) are both checking this correctly thus need no modification. Thanks to Ben for some pointers from the crash dumps! Cc: Benjamin Poirier <bpoirier@suse.com> Cc: Paolo Abeni <pabeni@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1361414 Signed-off-by: Ian Wienand <iwienand@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03openvswitch: Remove incorrect WARN_ONCE().Jarno Rajahalme
ovs_ct_find_existing() issues a warning if an existing conntrack entry classified as IP_CT_NEW is found, with the premise that this should not happen. However, a newly confirmed, non-expected conntrack entry remains IP_CT_NEW as long as no reply direction traffic is seen. This has resulted into somewhat confusing kernel log messages. This patch removes this check and warning. Fixes: 289f2253 ("openvswitch: Find existing conntrack entry after upcall.") Suggested-by: Joe Stringer <joe@ovn.org> Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22netfilter: conntrack: support a fixed size of 128 distinct labelsFlorian Westphal
The conntrack label extension is currently variable-sized, e.g. if only 2 labels are used by iptables rules then the labels->bits[] array will only contain one element. We track size of each label storage area in the 'words' member. But in nftables and openvswitch we always have to ask for worst-case since we don't know what bit will be used at configuration time. As most arches are 64bit we need to allocate 24 bytes in this case: struct nf_conn_labels { u8 words; /* 0 1 */ /* XXX 7 bytes hole, try to pack */ long unsigned bits[2]; /* 8 24 */ Make bits a fixed size and drop the words member, it simplifies the code and only increases memory requirements on x86 when less than 64bit labels are required. We still only allocate the extension if its needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29openvswitch: fix conntrack netlink event deliverySamuel Gauthier
Only the first and last netlink message for a particular conntrack are actually sent. The first message is sent through nf_conntrack_confirm when the conntrack is committed. The last one is sent when the conntrack is destroyed on timeout. The other conntrack state change messages are not advertised. When the conntrack subsystem is used from netfilter, nf_conntrack_confirm is called for each packet, from the postrouting hook, which in turn calls nf_ct_deliver_cached_events to send the state change netlink messages. This commit fixes the problem by calling nf_ct_deliver_cached_events in the non-commit case as well. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") CC: Joe Stringer <joestringer@nicira.com> CC: Justin Pettit <jpettit@nicira.com> CC: Andy Zhou <azhou@nicira.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25openvswitch: Only set mark and labels with a commit flag.Jarno Rajahalme
Only set conntrack mark or labels when the commit flag is specified. This makes sure we can not set them before the connection has been persisted, as in that case the mark and labels would be lost in an event of an userspace upcall. OVS userspace already requires the commit flag to accept setting ct_mark and/or ct_labels. Validate for this in the kernel API. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25openvswitch: Set mark and labels before confirming.Jarno Rajahalme
Set conntrack mark and labels right before committing so that the initial conntrack NEW event has the mark and labels. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22openvswitch: Add packet len info to upcall.William Tu
The commit f2a4d086ed4c ("openvswitch: Add packet truncation support.") introduces packet truncation before sending to userspace upcall receiver. This patch passes up the skb->len before truncation so that the upcall receiver knows the original packet size. Potentially this will be used by sFlow, where OVS translates sFlow config header=N to a sample action, truncating packet to N byte in kernel datapath. Thus, only N bytes instead of full-packet size is copied from kernel to userspace, saving the kernel-to-userspace bandwidth. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Pravin Shelar <pshelar@nicira.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10openvswitch: Add packet truncation support.William Tu
The patch adds a new OVS action, OVS_ACTION_ATTR_TRUNC, in order to truncate packets. A 'max_len' is added for setting up the maximum packet size, and a 'cutlen' field is to record the number of bytes to trim the packet when the packet is outputting to a port, or when the packet is sent to userspace. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Pravin Shelar <pshelar@nicira.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02ovs: set name assign type of internal portZhang Shengju
Set name_assign_type of internal port to NET_NAME_USER. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31openvswitch: update checksum in {push,pop}_mplsSimon Horman
In the case of CHECKSUM_COMPLETE the skb checksum should be updated in {push,pop}_mpls() as they the type in the ethernet header. As suggested by Pravin Shelar. Cc: Pravin Shelar <pshelar@nicira.com> Fixes: 25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel") Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>