summaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)Author
2018-02-01openvswitch: Remove padding from packet before L3+ conntrack processingEd Swierk
IPv4 and IPv6 packets may arrive with lower-layer padding that is not included in the L3 length. For example, a short IPv4 packet may have up to 6 bytes of padding following the IP payload when received on an Ethernet device with a minimum packet length of 64 bytes. Higher-layer processing functions in netfilter (e.g. nf_ip_checksum(), and help() in nf_conntrack_ftp) assume skb->len reflects the length of the L3 header and payload, rather than referring back to ip_hdr->tot_len or ipv6_hdr->payload_len, and get confused by lower-layer padding. In the normal IPv4 receive path, ip_rcv() trims the packet to ip_hdr->tot_len before invoking netfilter hooks. In the IPv6 receive path, ip6_rcv() does the same using ipv6_hdr->payload_len. Similarly in the br_netfilter receive path, br_validate_ipv4() and br_validate_ipv6() trim the packet to the L3 length before invoking netfilter hooks. Currently in the OVS conntrack receive path, ovs_ct_execute() pulls the skb to the L3 header but does not trim it to the L3 length before calling nf_conntrack_in(NF_INET_PRE_ROUTING). When nf_conntrack_proto_tcp encounters a packet with lower-layer padding, nf_ip_checksum() fails causing a "nf_ct_tcp: bad TCP checksum" log message. While extra zero bytes don't affect the checksum, the length in the IP pseudoheader does. That length is based on skb->len, and without trimming, it doesn't match the length the sender used when computing the checksum. In ovs_ct_execute(), trim the skb to the L3 length before higher-layer processing. Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31openvswitch: meter: Use 64-bit arithmetic instead of 32-bitGustavo A. R. Silva
Add suffix LL to constant 1000 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type long long int (64 bits, signed). The expression (band->burst_size + band->rate) * 1000 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1461563 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25openvswitch: add erspan version I and II supportWilliam Tu
The patch adds support for openvswitch to configure erspan v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added to uapi as a binary blob to support all ERSPAN v1 and v2's fields. Note that Previous commit "openvswitch: Add erspan tunnel support." was reverted since it does not design properly. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18flow_netlink: Remove unneeded semicolonsChristopher Díaz Riveros
Trivial fix removes unneeded semicolons after if blocks. This issue was detected by using the Coccinelle software. Signed-off-by: Christopher Díaz Riveros <chrisadr@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15Revert "openvswitch: Add erspan tunnel support."William Tu
This reverts commit ceaa001a170e43608854d5290a48064f57b565ed. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr should be designed as a nested attribute to support all ERSPAN v1 and v2's fields. The current attr is a be32 supporting only one field. Thus, this patch reverts it and later patch will redo it using nested attr. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: ovs: remove unused hardirq.hYang Shi
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by openvswitch at all. So, remove the unused hardirq.h. Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: dev@openvswitch.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02openvswitch: drop unneeded newlineJulia Lawall
OVS_NLERR prints a newline at the end of the message string, so the message string does not need to include a newline explicitly. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21openvswitch: Fix pop_vlan action for double tagged framesEric Garver
skb_vlan_pop() expects skb->protocol to be a valid TPID for double tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop() shift the true ethertype into position for us. Fixes: 5108bbaddc37 ("openvswitch: add processing of L3 packets") Signed-off-by: Eric Garver <e@erig.me> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: erspan: refactor existing erspan codeWilliam Tu
The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02openvswitch: do not propagate headroom updates to internal portPaolo Abeni
After commit 3a927bc7cf9d ("ovs: propagate per dp max headroom to all vports") the need_headroom for the internal vport is updated accordingly to the max needed headroom in its datapath. That avoids the pskb_expand_head() costs when sending/forwarding packets towards tunnel devices, at least for some scenarios. We still require such copy when using the ovs-preferred configuration for vxlan tunnels: br_int / \ tap vxlan (remote_ip:X) br_phy \ NIC where the route towards the IP 'X' is via 'br_phy'. When forwarding traffic from the tap towards the vxlan device, we will call pskb_expand_head() in vxlan_build_skb() because br-phy->needed_headroom is equal to tun->needed_headroom. With this change we avoid updating the internal vport needed_headroom, so that in the above scenario no head copy is needed, giving 5% performance improvement in UDP throughput test. As a trade-off, packets sent from the internal port towards a tunnel device will now experience the head copy overhead. The rationale is that the latter use-case is less relevant performance-wise. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30openvswitch: use ktime_get_ts64() instead of ktime_get_ts()Arnd Bergmann
timespec is deprecated because of the y2038 overflow, so let's convert this one to ktime_get_ts64(). The code is already safe even on 32-bit architectures, since it uses monotonic times. On 64-bit architectures, nothing changes, while on 32-bit architectures this avoids one type conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-26openvswitch: fix the incorrect flow action alloc sizezhangliping
If we want to add a datapath flow, which has more than 500 vxlan outputs' action, we will get the following error reports: openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Actions may not be safe on all matching packets ... ... It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but this is not the root cause. For example, for a vxlan output action, we need about 60 bytes for the nlattr, but after it is converted to the flow action, it only occupies 24 bytes. This means that we can still support more than 1000 vxlan output actions for a single datapath flow under the the current 32k max limitation. So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we shouldn't report EINVAL and keep it move on, as the judgement can be done by the reserve_sfa_size. Signed-off-by: zhangliping <zhangliping02@baidu.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-27net: openvswitch: datapath: fix data type in queue_gso_packetsGustavo A. R. Silva
gso_type is being used in binary AND operations together with SKB_GSO_UDP. The issue is that variable gso_type is of type unsigned short and SKB_GSO_UDP expands to more than 16 bits: SKB_GSO_UDP = 1 << 16 this makes any binary AND operation between gso_type and SKB_GSO_UDP to be always zero, hence making some code unreachable and likely causing undesired behavior. Fix this by changing the data type of variable gso_type to unsigned int. Addresses-Coverity-ID: 1462223 Fixes: 0c19f846d582 ("net: accept UFO datagrams from tuntap and packet") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24net: accept UFO datagrams from tuntap and packetWillem de Bruijn
Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_startGustavo A. R. Silva
It seems that the intention of the code is to null check the value returned by function genlmsg_put. But the current code is null checking the address of the pointer that holds the value returned by genlmsg_put. Fix this by properly null checking the value returned by function genlmsg_put in order to avoid a pontential null pointer dereference. Addresses-Coverity-ID: 1461561 ("Dereference before null check") Addresses-Coverity-ID: 1461562 ("Dereference null return value") Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14openvswitch: Using kfree_rcu() to simplify the codeWei Yongjun
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14openvswitch: Make local function ovs_nsh_key_attr_size() staticWei Yongjun
Fixes the following sparse warnings: net/openvswitch/flow_netlink.c:340:8: warning: symbol 'ovs_nsh_key_attr_size' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14openvswitch: Fix return value check in ovs_meter_cmd_features()Wei Yongjun
In case of error, the function ovs_meter_cmd_reply_start() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13openvswitch: Add meter action supportAndy Zhou
Implements OVS kernel meter action support. Signed-off-by: Andy Zhou <azhou@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13openvswitch: Add meter infrastructureAndy Zhou
OVS kernel datapath so far does not support Openflow meter action. This is the first stab at adding kernel datapath meter support. This implementation supports only drop band type. Signed-off-by: Andy Zhou <azhou@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13openvswitch: export get_dp() API.Andy Zhou
Later patches will invoke get_dp() outside of datapath.c. Export it. Signed-off-by: Andy Zhou <azhou@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08openvswitch: enable NSH supportYi Yang
v16->17 - Fixed disputed check code: keep them in nsh_push and nsh_pop but also add them in __ovs_nla_copy_actions v15->v16 - Add csum recalculation for nsh_push, nsh_pop and set_nsh pointed out by Pravin - Move nsh key into the union with ipv4 and ipv6 and add check for nsh key in match_validate pointed out by Pravin - Add nsh check in validate_set and __ovs_nla_copy_actions v14->v15 - Check size in nsh_hdr_from_nlattr - Fixed four small issues pointed out By Jiri and Eric v13->v14 - Rename skb_push_nsh to nsh_push per Dave's comment - Rename skb_pop_nsh to nsh_pop per Dave's comment v12->v13 - Fix NSH header length check in set_nsh v11->v12 - Fix missing changes old comments pointed out - Fix new comments for v11 v10->v11 - Fix the left three disputable comments for v9 but not fixed in v10. v9->v10 - Change struct ovs_key_nsh to struct ovs_nsh_key_base base; __be32 context[NSH_MD1_CONTEXT_SIZE]; - Fix new comments for v9 v8->v9 - Fix build error reported by daily intel build because nsh module isn't selected by openvswitch v7->v8 - Rework nested value and mask for OVS_KEY_ATTR_NSH - Change pop_nsh to adapt to nsh kernel module - Fix many issues per comments from Jiri Benc v6->v7 - Remove NSH GSO patches in v6 because Jiri Benc reworked it as another patch series and they have been merged. - Change it to adapt to nsh kernel module added by NSH GSO patch series v5->v6 - Fix the rest comments for v4. - Add NSH GSO support for VxLAN-gpe + NSH and Eth + NSH. v4->v5 - Fix many comments by Jiri Benc and Eric Garver for v4. v3->v4 - Add new NSH match field ttl - Update NSH header to the latest format which will be final format and won't change per its author's confirmation. - Fix comments for v3. v2->v3 - Change OVS_KEY_ATTR_NSH to nested key to handle length-fixed attributes and length-variable attriubte more flexibly. - Remove struct ovs_action_push_nsh completely - Add code to handle nested attribute for SET_MASKED - Change PUSH_NSH to use the nested OVS_KEY_ATTR_NSH to transfer NSH header data. - Fix comments and coding style issues by Jiri and Eric v1->v2 - Change encap_nsh and decap_nsh to push_nsh and pop_nsh - Dynamically allocate struct ovs_action_push_nsh for length-variable metadata. OVS master and 2.8 branch has merged NSH userspace patch series, this patch is to enable NSH support in kernel data path in order that OVS can support NSH in compat mode by porting this. Signed-off-by: Yi Yang <yi.y.yang@intel.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Eric Garver <e@erig.me> Acked-by: Pravin Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05openvswitch: reliable interface indentification in port dumpsJiri Benc
This patch allows reliable identification of netdevice interfaces connected to openvswitch bridges. In particular, user space queries the netdev interfaces belonging to the ports for statistics, up/down state, etc. Datapath dump needs to provide enough information for the user space to be able to do that. Currently, only interface names are returned. This is not sufficient, as openvswitch allows its ports to be in different name spaces and the interface name is valid only in its name space. What is needed and generally used in other netlink APIs, is the pair ifindex+netnsid. The solution is addition of the ifindex+netnsid pair (or only ifindex if in the same name space) to vport get/dump operation. On request side, ideally the ifindex+netnsid pair could be used to get/set/del the corresponding vport. This is not implemented by this patch and can be added later if needed. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-22openvswitch: conntrack: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I placed a "fall through" comment on its own line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10openvswitch: add ct_clear actionEric Garver
This adds a ct_clear action for clearing conntrack state. ct_clear is currently implemented in OVS userspace, but is not backed by an action in the kernel datapath. This is useful for flows that may modify a packet tuple after a ct lookup has already occurred. Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09openvswitch: Add erspan tunnel support.William Tu
Add erspan netlink interface for OVS. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to upper device linkingDavid Ahern
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12openvswitch: Fix an error handling path in 'ovs_nla_init_match_and_action()'Christophe JAILLET
All other error handling paths in this function go through the 'error' label. This one should do the same. Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Basically, updates to the conntrack core, enhancements for nf_tables, conversion of netfilter hooks from linked list to array to improve memory locality and asorted improvements for the Netfilter codebase. More specifically, they are: 1) Add expection to hashes after timer initialization to prevent access from another CPU that walks on the hashes and calls del_timer(), from Florian Westphal. 2) Don't update nf_tables chain counters from hot path, this is only used by the x_tables compatibility layer. 3) Get rid of nested rcu_read_lock() calls from netfilter hook path. Hooks are always guaranteed to run from rcu read side, so remove nested rcu_read_lock() where possible. Patch from Taehee Yoo. 4) nf_tables new ruleset generation notifications include PID and name of the process that has updated the ruleset, from Phil Sutter. 5) Use skb_header_pointer() from nft_fib, so we can reuse this code from the nf_family netdev family. Patch from Pablo M. Bermudo. 6) Add support for nft_fib in nf_tables netdev family, also from Pablo. 7) Use deferrable workqueue for conntrack garbage collection, to reduce power consumption, from Patch from Subash Abhinov Kasiviswanathan. 8) Add nf_ct_expect_iterate_net() helper and use it. From Florian Westphal. 9) Call nf_ct_unconfirmed_destroy only from cttimeout, from Florian. 10) Drop references on conntrack removal path when skbuffs has escaped via nfqueue, from Florian. 11) Don't queue packets to nfqueue with dying conntrack, from Florian. 12) Constify nf_hook_ops structure, from Florian. 13) Remove neededlessly branch in nf_tables trace code, from Phil Sutter. 14) Add nla_strdup(), from Phil Sutter. 15) Rise nf_tables objects name size up to 255 chars, people want to use DNS names, so increase this according to what RFC 1035 specifies. Patch series from Phil Sutter. 16) Kill nf_conntrack_default_on, it's broken. Default on conntrack hook registration on demand, suggested by Eric Dumazet, patch from Florian. 17) Remove unused variables in compat_copy_entry_from_user both in ip_tables and arp_tables code. Patch from Taehee Yoo. 18) Constify struct nf_conntrack_l4proto, from Julia Lawall. 19) Constify nf_loginfo structure, also from Julia. 20) Use a single rb root in connlimit, from Taehee Yoo. 21) Remove unused netfilter_queue_init() prototype, from Taehee Yoo. 22) Use audit_log() instead of open-coding it, from Geliang Tang. 23) Allow to mangle tcp options via nft_exthdr, from Florian. 24) Allow to fetch TCP MSS from nft_rt, from Florian. This includes a fix for a miscalculation of the minimal length. 25) Simplify branch logic in h323 helper, from Nick Desaulniers. 26) Calculate netlink attribute size for conntrack tuple at compile time, from Florian. 27) Remove protocol name field from nf_conntrack_{l3,l4}proto structure. From Florian. 28) Remove holes in nf_conntrack_l4proto structure, so it becomes smaller. From Florian. 29) Get rid of print_tuple() indirection for /proc conntrack listing. Place all the code in net/netfilter/nf_conntrack_standalone.c. Patch from Florian. 30) Do not built in print_conntrack() if CONFIG_NF_CONNTRACK_PROCFS is off. From Florian. 31) Constify most nf_conntrack_{l3,l4}proto helper functions, from Florian. 32) Fix broken indentation in ebtables extensions, from Colin Ian King. 33) Fix several harmless sparse warning, from Florian. 34) Convert netfilter hook infrastructure to use array for better memory locality, joint work done by Florian and Aaron Conole. Moreover, add some instrumentation to debug this. 35) Batch nf_unregister_net_hooks() calls, to call synchronize_net once per batch, from Florian. 36) Get rid of noisy logging in ICMPv6 conntrack helper, from Florian. 37) Get rid of obsolete NFDEBUG() instrumentation, from Varsha Rao. 38) Remove unused code in the generic protocol tracker, from Davide Caratti. I think I will have material for a second Netfilter batch in my queue if time allow to make it fit in this merge window. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24netfilter: conntrack: make protocol tracker pointers constFlorian Westphal
Doesn't change generated code, but will make it easier to eventually make the actual trackers themselvers const. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-08-16openvswitch: fix skb_panic due to the incorrect actions attrlenLiping Zhang
For sw_flow_actions, the actions_len only represents the kernel part's size, and when we dump the actions to the userspace, we will do the convertions, so it's true size may become bigger than the actions_len. But unfortunately, for OVS_PACKET_ATTR_ACTIONS, we use the actions_len to alloc the skbuff, so the user_skb's size may become insufficient and oops will happen like this: skbuff: skb_over_panic: text:ffffffff8148fabf len:1749 put:157 head: ffff881300f39000 data:ffff881300f39000 tail:0x6d5 end:0x6c0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:129! [...] Call Trace: <IRQ> [<ffffffff8148be82>] skb_put+0x43/0x44 [<ffffffff8148fabf>] skb_zerocopy+0x6c/0x1f4 [<ffffffffa0290d36>] queue_userspace_packet+0x3a3/0x448 [openvswitch] [<ffffffffa0292023>] ovs_dp_upcall+0x30/0x5c [openvswitch] [<ffffffffa028d435>] output_userspace+0x132/0x158 [openvswitch] [<ffffffffa01e6890>] ? ip6_rcv_finish+0x74/0x77 [ipv6] [<ffffffffa028e277>] do_execute_actions+0xcc1/0xdc8 [openvswitch] [<ffffffffa028e3f2>] ovs_execute_actions+0x74/0x106 [openvswitch] [<ffffffffa0292130>] ovs_dp_process_packet+0xe1/0xfd [openvswitch] [<ffffffffa0292b77>] ? key_extract+0x63c/0x8d5 [openvswitch] [<ffffffffa029848b>] ovs_vport_receive+0xa1/0xc3 [openvswitch] [...] Also we can find that the actions_len is much little than the orig_len: crash> struct sw_flow_actions 0xffff8812f539d000 struct sw_flow_actions { rcu = { next = 0xffff8812f5398800, func = 0xffffe3b00035db32 }, orig_len = 1384, actions_len = 592, actions = 0xffff8812f539d01c } So as a quick fix, use the orig_len instead of the actions_len to alloc the user_skb. Last, this oops happened on our system running a relative old kernel, but the same risk still exists on the mainline, since we use the wrong actions_len from the beginning. Fixes: ccea74457bbd ("openvswitch: include datapath actions with sampled-packet upcall to userspace") Cc: Neil McKee <neil.mckee@inmon.com> Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11openvswitch: Remove unnecessary newlines from OVS_NLERR usesJoe Perches
OVS_NLERR already adds a newline so these just add blank lines to the logging. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24openvswitch: fix potential out of bound access in parse_ctLiping Zhang
Before the 'type' is validated, we shouldn't use it to fetch the ovs_ct_attr_lens's minlen and maxlen, else, out of bound access may happen. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-07-19openvswitch: Optimize operations for OvS flow_stats.Tonghao Zhang
When calling the flow_free() to free the flow, we call many times (cpu_possible_mask, eg. 128 as default) cpumask_next(). That will take up our CPU usage if we call the flow_free() frequently. When we put all packets to userspace via upcall, and OvS will send them back via netlink to ovs_packet_cmd_execute(will call flow_free). The test topo is shown as below. VM01 sends TCP packets to VM02, and OvS forward packtets. When testing, we use perf to report the system performance. VM01 --- OvS-VM --- VM02 Without this patch, perf-top show as below: The flow_free() is 3.02% CPU usage. 4.23% [kernel] [k] _raw_spin_unlock_irqrestore 3.62% [kernel] [k] __do_softirq 3.16% [kernel] [k] __memcpy 3.02% [kernel] [k] flow_free 2.42% libc-2.17.so [.] __memcpy_ssse3_back 2.18% [kernel] [k] copy_user_generic_unrolled 2.17% [kernel] [k] find_next_bit When applied this patch, perf-top show as below: Not shown on the list anymore. 4.11% [kernel] [k] _raw_spin_unlock_irqrestore 3.79% [kernel] [k] __do_softirq 3.46% [kernel] [k] __memcpy 2.73% libc-2.17.so [.] __memcpy_ssse3_back 2.25% [kernel] [k] copy_user_generic_unrolled 1.89% libc-2.17.so [.] _int_malloc 1.53% ovs-vswitchd [.] xlate_actions With this patch, the TCP throughput(we dont use Megaflow Cache + Microflow Cache) between VMs is 1.18Gbs/sec up to 1.30Gbs/sec (maybe ~10% performance imporve). This patch adds cpumask struct, the cpu_used_mask stores the cpu_id that the flow used. And we only check the flow_stats on the cpu we used, and it is unncessary to check all possible cpu when getting, cleaning, and updating the flow_stats. Adding the cpu_used_mask to sw_flow struct does’t increase the cacheline number. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19openvswitch: Optimize updating for OvS flow_stats.Tonghao Zhang
In the ovs_flow_stats_update(), we only use the node var to alloc flow_stats struct. But this is not a common case, it is unnecessary to call the numa_node_id() everytime. This patch is not a bugfix, but there maybe a small increase. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17net: Remove all references to SKB_GSO_UDP.David S. Miller
Such packets are no longer possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-15openvswitch: Fix for force/commit action failuresGreg Rose
When there is an established connection in direction A->B, it is possible to receive a packet on port B which then executes ct(commit,force) without first performing ct() - ie, a lookup. In this case, we would expect that this packet can delete the existing entry so that we can commit a connection with direction B->A. However, currently we only perform a check in skb_nfct_cached() for whether OVS_CS_F_TRACKED is set and OVS_CS_F_INVALID is not set, ie that a lookup previously occurred. In the above scenario, a lookup has not occurred but we should still be able to statelessly look up the existing entry and potentially delete the entry if it is in the opposite direction. This patch extends the check to also hint that if the action has the force flag set, then we will lookup the existing entry so that the force check at the end of skb_nfct_cached has the ability to delete the connection. Fixes: dd41d330b03 ("openvswitch: Add force commit.") CC: Pravin Shelar <pshelar@nicira.com> CC: dev@openvswitch.org Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03openvswitch: fix mis-ordered comment lines for ovs_skb_cbDaniel Axtens
I was trying to wrap my head around meaning of mru, and realised that the second line of the comment defining it had somehow ended up after the line defining cutlen, leading to much confusion. Reorder the lines to make sense. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01datapath: Avoid using stack larger than 1024.Tonghao Zhang
When compiling OvS-master on 4.4.0-81 kernel, there is a warning: CC [M] /root/ovs/datapath/linux/datapath.o /root/ovs/datapath/linux/datapath.c: In function 'ovs_flow_cmd_set': /root/ovs/datapath/linux/datapath.c:1221:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] This patch factors out match-init and action-copy to avoid "Wframe-larger-than=1024" warning. Because mask is only used to get actions, we new a function to save some stack space. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: store port/representator id in metadata_dstJakub Kicinski
Switches and modern SR-IOV enabled NICs may multiplex traffic from Port representators and control messages over single set of hardware queues. Control messages and muxed traffic may need ordered delivery. Those requirements make it hard to comfortably use TC infrastructure today unless we have a way of attaching metadata to skbs at the upper device. Because single set of queues is used for many netdevs stopping TC/sched queues of all of them reliably is impossible and lower device has to retreat to returning NETDEV_TX_BUSY and usually has to take extra locks on the fastpath. This patch attempts to enable port/representative devs to attach metadata to skbs which carry port id. This way representatives can be queueless and all queuing can be performed at the lower netdev in the usual way. Traffic arriving on the port/representative interfaces will be have metadata attached and will subsequently be queued to the lower device for transmission. The lower device should recognize the metadata and translate it to HW specific format which is most likely either a special header inserted before the network headers or descriptor/metadata fields. Metadata is associated with the lower device by storing the netdev pointer along with port id so that if TC decides to redirect or mirror the new netdev will not try to interpret it. This is mostly for SR-IOV devices since switches don't have lower netdevs today. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20vxlan: get rid of redundant vxlan_dev.flagsMatthias Schiffer
There is no good reason to keep the flags twice in vxlan_dev and vxlan_config. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>