summaryrefslogtreecommitdiff
path: root/net/packet/diag.c
AgeCommit message (Collapse)Author
2017-01-10packet: pdiag_put_ring() should return TX_RING info for TPACKET_V3Sowmini Varadhan
Commit 7f953ab2ba46 ("af_packet: TX_RING support for TPACKET_V3") now makes it possible to use TX_RING with TPACKET_V3, so make the the relevant information available via 'ss -e -a --packet' Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24net: Use netlink_ns_capable to verify the permisions of netlink messagesEric W. Biederman
It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24net: Move the permission check in sock_diag_put_filterinfo to packet_diag_dumpEric W. Biederman
The permission check in sock_diag_put_filterinfo is wrong, and it is so removed from it's sources it is not clear why it is wrong. Move the computation into packet_diag_dump and pass a bool of the result into sock_diag_filterinfo. This does not yet correct the capability check but instead simply moves it to make it clear what is going on. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22net: Fix ns_capable check in sock_diag_put_filterinfoAndrew Lutomirski
The caller needs capabilities on the namespace being queried, not on their own namespace. This is a security bug, although it likely has only a minor impact. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16packet: use percpu mmap tx frame pending refcountDaniel Borkmann
In PF_PACKET's packet mmap(), we can avoid using one atomic_inc() and one atomic_dec() call in skb destructor and use a percpu reference count instead in order to determine if packets are still pending to be sent out. Micro-benchmark with [1] that has been slightly modified (that is, protcol = 0 in socket(2) and bind(2)), example on a rather crappy testing machine; I expect it to scale and have even better results on bigger machines: ./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs: With patch: 4,022,015 cyc Without patch: 4,812,994 cyc time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable: With patch: real 1m32.241s user 0m0.287s sys 1m29.316s Without patch: real 1m38.386s user 0m0.265s sys 1m35.572s In function tpacket_snd(), it is okay to use packet_read_pending() since in fast-path we short-circuit the condition already with ph != NULL, since we have next frames to process. In case we have MSG_DONTWAIT, we also do not execute this path as need_wait is false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is okay to call a packet_read_pending(), because when we ever reach that path, we're done processing outgoing frames anyway and only look if there are skbs still outstanding to be orphaned. We can stay lockless in this percpu counter since it's acceptable when we reach this path for the sum to be imprecise first, but we'll level out at 0 after all pending frames have reached the skb destructor eventually through tx reclaim. When people pin a tx process to particular CPUs, we expect overflows to happen in the reference counter as on one CPU we expect heavy increase; and distributed through ksoftirqd on all CPUs a decrease, for example. As David Laight points out, since the C language doesn't define the result of signed int overflow (i.e. rather than wrap, it is allowed to saturate as a possible outcome), we have to use unsigned int as reference count. The sum over all CPUs when tx is complete will result in 0 again. The BUG_ON() in tpacket_destruct_skb() we can remove as well. It can _only_ be set from inside tpacket_snd() path and we made sure to increase tx_ring.pending in any case before we called po->xmit(skb). So testing for tx_ring.pending == 0 is not too useful. Instead, it would rather have been useful to test if lower layers didn't orphan the skb so that we're missing ring slots being put back to TP_STATUS_AVAILABLE. But such a bug will be caught in user space already as we end up realizing that we do not have any TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set. Btw, in case of RX_RING path, we do not make use of the pending member, therefore we also don't need to use up any percpu memory here. Also note that __alloc_percpu() already returns a zero-filled percpu area, so initialization is done already. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29sock_diag: allow to dump bpf filtersNicolas Dichtel
This patch allows to dump BPF filters attached to a socket with SO_ATTACH_FILTER. Note that we check CAP_SYS_ADMIN before allowing to dump this info. For now, only AF_PACKET sockets use this feature. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29packet_diag: disclose meminfo valuesNicolas Dichtel
sk_rmem_alloc is disclosed via /proc/net/packet but not via netlink messages. The goal is to have the same level of information. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29packet_diag: disclose uid valueNicolas Dichtel
This value is disclosed via /proc/net/packet but not via netlink messages. The goal is to have the same level of information. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-10netlink: Rename pid to portid to avoid confusionEric W. Biederman
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22packet: Protect packet sk list with mutex (v2)Pavel Emelyanov
Change since v1: * Fixed inuse counters access spotted by Eric In patch eea68e2f (packet: Report socket mclist info via diag module) I've introduced a "scheduling in atomic" problem in packet diag module -- the socket list is traversed under rcu_read_lock() while performed under it sk mclist access requires rtnl lock (i.e. -- mutex) to be taken. [152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002 [152363.820573] 4 locks held by crtools/12517: [152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e [152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a [152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab [152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af Similar thing was then re-introduced by further packet diag patches (fanount mutex and pgvec mutex for rings) :( Apart from being terribly sorry for the above, I propose to change the packet sk list protection from spinlock to mutex. This lock currently protects two modifications: * sklist * prot inuse counters The sklist modifications can be just reprotected with mutex since they already occur in a sleeping context. The inuse counters modifications are trickier -- the __this_cpu_-s are used inside, thus requiring the caller to handle the potential issues with contexts himself. Since packet sockets' counters are modified in two places only (packet_create and packet_release) we only need to protect the context from being preempted. BH disabling is not required in this case. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20packet: Report fanout status via diag enginePavel Emelyanov
Reported value is the same reported by the FANOUT getsockoption, but unlike it, the absent fanout setup results in absent nlattr, rather than in nlattr with zero value. This is done so, since zero fanout report may mean both -- no fanout, and fanout with both id and type zero. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20packet: Report rings cfg via diag enginePavel Emelyanov
One extension bit may result in two nlattrs -- one per ring type. If some ring type is not configured, then the respective nlatts will be empty. The structure reported contains the data, that is given to the corresponding ring setup socket option. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Report socket mclist info via diag modulePavel Emelyanov
The info is reported as an array of packet_diag_mclist structures. Each includes not only the directly configured values (index, type, etc), but also the "count". Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Report more packet sk info via diag modulePavel Emelyanov
This reports in one rtattr message all the other scalar values, that can be set on a packet socket with setsockopt. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Diag core and basic socket info dumpingPavel Emelyanov
The diag module can be built independently from the af_packet.ko one, just like it's done in unix sockets. The core dumping message carries the info available at socket creation time, i.e. family, type and protocol (in the same byte order as shown in the proc file). The socket inode number and cookie is reserved for future per-socket info retrieving. The per-protocol filtering is also reserved for future by requiring the sdiag_protocol to be zero. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>