summaryrefslogtreecommitdiff
path: root/net/rds/rdma_transport.c
AgeCommit message (Collapse)Author
2019-08-24net: rds: add service level support in rds-infoZhu Yanjun
>From IB specific 7.6.5 SERVICE LEVEL, Service Level (SL) is used to identify different flows within an IBA subnet. It is carried in the local route header of the packet. Before this commit, run "rds-info -I". The outputs are as below: " RDS IB Connections: LocalAddr RemoteAddr Tos SL LocalDev RemoteDev 192.2.95.3 192.2.95.1 2 0 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 1 0 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9 " After this commit, the output is as below: " RDS IB Connections: LocalAddr RemoteAddr Tos SL LocalDev RemoteDev 192.2.95.3 192.2.95.1 2 2 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 1 1 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9 " The commit fe3475af3bdf ("net: rds: add per rds connection cache statistics") adds cache_allocs in struct rds_info_rdma_connection as below: struct rds_info_rdma_connection { ... __u32 rdma_mr_max; __u32 rdma_mr_size; __u8 tos; __u32 cache_allocs; }; The peer struct in rds-tools of struct rds_info_rdma_connection is as below: struct rds_info_rdma_connection { ... uint32_t rdma_mr_max; uint32_t rdma_mr_size; uint8_t tos; uint8_t sl; uint32_t cache_allocs; }; The difference between userspace and kernel is the member variable sl. In the kernel struct, the member variable sl is missing. This will introduce risks. So it is necessary to use this commit to avoid this risk. Fixes: fe3475af3bdf ("net: rds: add per rds connection cache statistics") CC: Joe Jin <joe.jin@oracle.com> CC: JUNXIAO_BI <junxiao.bi@oracle.com> Suggested-by: Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27net: rds: Fix possible null-pointer dereferences in ↵Jia-Ju Bai
rds_rdma_cm_event_handler_cmn() In rds_rdma_cm_event_handler_cmn(), there are some if statements to check whether conn is NULL, such as on lines 65, 96 and 112. But conn is not checked before being used on line 108: trans->cm_connect_complete(conn, event); and on lines 140-143: rdsdebug("DISCONNECT event - dropping connection " "%pI6c->%pI6c\n", &conn->c_laddr, &conn->c_faddr); rds_conn_drop(conn); Thus, possible null-pointer dereferences may occur. To fix these bugs, conn is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09rds: avoid version downgrade to legitimate newer peer connectionsSantosh Shilimkar
Connections with legitimate tos values can get into usual connection race. It can result in consumer reject. We don't want tos value or protocol version to be demoted for such connections otherwise piers would end up different tos values which can results in no connection. Example a peer initiated connection with say tos 8 while usual connection racing can get downgraded to tos 0 which is not desirable. Patch fixes above issue introduced by commit commit d021fabf525f ("rds: rdma: add consumer reject") Reported-by: Yanjun Zhu <yanjun.zhu@oracle.com> Tested-by: Yanjun Zhu <yanjun.zhu@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-07-09rds: Accept peer connection reject messages due to incompatible versionGerd Rausch
Prior to commit d021fabf525ff ("rds: rdma: add consumer reject") function "rds_rdma_cm_event_handler_cmn" would always honor a rejected connection attempt by issuing a "rds_conn_drop". The commit mentioned above added a "break", eliminating the "fallthrough" case and made the "rds_conn_drop" rather conditional: Now it only happens if a "consumer defined" reject (i.e. "rdma_reject") carries an integer-value of "1" inside "private_data": if (!conn) break; err = (int *)rdma_consumer_reject_data(cm_id, event, &len); if (!err || (err && ((*err) == RDS_RDMA_REJ_INCOMPAT))) { pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n", &conn->c_laddr, &conn->c_faddr); conn->c_proposed_version = RDS_PROTOCOL_COMPAT_VERSION; rds_conn_drop(conn); } rdsdebug("Connection rejected: %s\n", rdma_reject_msg(cm_id, event->status)); break; /* FALLTHROUGH */ A number of issues are worth mentioning here: #1) Previous versions of the RDS code simply rejected a connection by calling "rdma_reject(cm_id, NULL, 0);" So the value of the payload in "private_data" will not be "1", but "0". #2) Now the code has become dependent on host byte order and sizing. If one peer is big-endian, the other is little-endian, or there's a difference in sizeof(int) (e.g. ILP64 vs LP64), the *err check does not work as intended. #3) There is no check for "len" to see if the data behind *err is even valid. Luckily, it appears that the "rdma_reject(cm_id, NULL, 0)" will always carry 148 bytes of zeroized payload. But that should probably not be relied upon here. #4) With the added "break;", we might as well drop the misleading "/* FALLTHROUGH */" comment. This commit does _not_ address issue #2, as the sender would have to agree on a byte order as well. Here is the sequence of messages in this observed error-scenario: Host-A is pre-QoS changes (excluding the commit mentioned above) Host-B is post-QoS changes (including the commit mentioned above) #1 Host-B issues a connection request via function "rds_conn_path_transition" connection state transitions to "RDS_CONN_CONNECTING" #2 Host-A rejects the incompatible connection request (from #1) It does so by calling "rdma_reject(cm_id, NULL, 0);" #3 Host-B receives an "RDMA_CM_EVENT_REJECTED" event (from #2) But since the code is changed in the way described above, it won't drop the connection here, simply because "*err == 0". #4 Host-A issues a connection request #5 Host-B receives an "RDMA_CM_EVENT_CONNECT_REQUEST" event and ends up calling "rds_ib_cm_handle_connect". But since the state is already in "RDS_CONN_CONNECTING" (as of #1) it will end up issuing a "rdma_reject" without dropping the connection: if (rds_conn_state(conn) == RDS_CONN_CONNECTING) { /* Wait and see - our connect may still be succeeding */ rds_ib_stats_inc(s_ib_connect_raced); } goto out; #6 Host-A receives an "RDMA_CM_EVENT_REJECTED" event (from #5), drops the connection and tries again (goto #4) until it gives up. Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-02-04rds: rdma: update rdma transport for tosSantosh Shilimkar
For RDMA transports, RDS TOS is an extension of IB QoS(Annex A13) to provide clients the ability to segregate traffic flows for different type of data. RDMA CM abstract it for ULPs using rdma_set_service_type(). Internally, each traffic flow is represented by a connection with all of its independent resources like that of a normal connection, and is differentiated by service type. In other words, there can be multiple qp connections between an IP pair and each supports a unique service type. The feature has been added from RDSv4.1 onwards and supports rolling upgrades. RDMA connection metadata also carries the tos information to set up SL on end to end context. The original code was developed by Bang Nguyen in downstream kernel back in 2.6.32 kernel days and it has evolved over period of time. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04rds: add type of service(tos) infrastructureSantosh Shilimkar
RDS Service type (TOS) is user-defined and needs to be configured via RDS IOCTL interface. It must be set before initiating any traffic and once set the TOS can not be changed. All out-going traffic from the socket will be associated with its TOS. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04rds: rdma: add consumer rejectSantosh Shilimkar
For legacy protocol version incompatibility with non linux RDS, consumer reject reason being used to convey it to peer. But the choice of reject reason value as '1' was really poor. Anyway for interoperability reasons with shipping products, it needs to be supported. For any future versions, properly encoded reject reason should to be used. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2018-08-01rds: Remove IPv6 dependencyKa-Cheong Poon
This patch removes the IPv6 dependency from RDS. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24rds: remove trailing whitespace and blank linesStephen Hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Enable RDS IPv6 supportKa-Cheong Poon
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the listener is now an IPv6 endpoint which accepts both IPv4 and IPv6 connection requests. RDS/RDMA/IB uses a private data (struct rds_ib_connect_private) exchange between endpoints at RDS connection establishment time to support RDMA. This private data exchange uses a 32 bit integer to represent an IP address. This needs to be changed in order to support IPv6. A new private data struct rds6_ib_connect_private is introduced to handle this. To ensure backward compatibility, an IPv6 capable RDS stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6 connection. And it continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to send the connection set up request. v5: Fixed syntax problem (David Miller). v4: Changed port history comments in rds.h (Sowmini Varadhan). v3: Added support to set up IPv4 connection using mapped address (David Miller). Added support to set up connection between link local and non-link addresses. Various review comments from Santosh Shilimkar and Sowmini Varadhan. v2: Fixed bound and peer address scope mismatched issue. Added back rds_connect() IPv6 changes. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Changing IP address internal representation to struct in6_addrKa-Cheong Poon
This patch changes the internal representation of an IP address to use struct in6_addr. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr. But RDS socket layer is not modified such that it still does not accept IPv6 address from an application. And RDS layer does not accept nor initiate IPv6 connections. v2: Fixed sparse warnings. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02RDS: RDMA: start rdma listening after initQing Huang
This prevents RDS from handling incoming rdma packets before RDS completes initializing its recv/send components. Signed-off-by: Qing Huang <qing.huang@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2016-12-14rds_rdma: log the connection reject messageSteve Wise
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-14RDS: split out connection specific state from rds_connection to rds_conn_pathSowmini Varadhan
In preparation for multipath RDS, split the rds_connection structure into a base structure, and a per-path struct rds_conn_path. The base structure tracks information and locks common to all paths. The workqs for send/recv/shutdown etc are tracked per rds_conn_path. Thus the workq callbacks now work with rds_conn_path. This commit allows for one rds_conn_path per rds_connection, and will be extended into multiple conn_paths in subsequent commits. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02RDS: IB: handle the RDMA CM time wait eventsantosh.shilimkar@oracle.com
Drop the RDS connection on RDMA_CM_EVENT_TIMEWAIT_EXIT so that it can reconnect and resume. While testing fastreg, this error happened in couple of tests but was getting un-noticed. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02RDS: Drop stale iWARP RDMA transportsantosh.shilimkar@oracle.com
RDS iWarp support code has become stale and non testable. As indicated earlier, am dropping the support for it. If new iWarp user(s) shows up in future, we can adapat the RDS IB transprt for the special RDMA READ sink case. iWarp needs an MR for the RDMA READ sink. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28IB/cma: Add support for network namespacesGuy Shapiro
Add support for network namespaces in the ib_cma module. This is accomplished by: 1. Adding network namespace parameter for rdma_create_id. This parameter is used to populate the network namespace field in rdma_id_private. rdma_create_id keeps a reference on the network namespace. 2. Using the network namespace from the rdma_id instead of init_net inside of ib_cma, when listening on an ID and when looking for an ID for an incoming request. 3. Decrementing the reference count for the appropriate network namespace when calling rdma_destroy_id. In order to preserve the current behavior init_net is passed when calling from other modules. Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-25RDS: check for valid cm_id before initiating connectionsantosh.shilimkar@oracle.com
Connection could have been dropped while the route is being resolved so check for valid cm_id before initiating the connection. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18RDS: Switch to generic logging helpersSagi Grimberg
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2014-05-30RDS/RDMA: Replace comma with semicolonHimangi Saraogi
This patch replaces a comma between expression statements by a semicolon. A simplified version of the semantic patch that performs this transformation is as follows: // <smpl> @r@ expression e1,e2,e; type T; identifier i; @@ e1 -, +; e2; // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31net: Fix files explicitly needing to include module.hPaul Gortmaker
With calls to modular infrastructure, these files really needs the full module.h header. Call it out so some of the cleanups of implicit and unrequired includes elsewhere can be cleaned up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-25RDMA/cma: Pass QP type into rdma_create_id()Sean Hefty
The RDMA CM currently infers the QP type from the port space selected by the user. In the future (eg with RDMA_PS_IB or XRC), there may not be a 1-1 correspondence between port space and QP type. For netlink export of RDMA CM state, we want to export the QP type to userspace, so it is cleaner to explicitly associate a QP type to an ID. Modify rdma_create_id() to allow the user to specify the QP type, and use it to make our selections of datagram versus connected mode. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2010-10-21rds: make local functions/variables staticstephen hemminger
The RDS protocol has lots of functions that should be declared static. rds_message_get/add_version_extension is removed since it defined but never used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08RDS/IB: print string constants in more placesZach Brown
This prints the constant identifier for work completion status and rdma cm event types, like we already do for IB event types. A core string array helper is added that each string type uses. Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08RDS: remove __init and __exit annotationZach Brown
The trivial amount of memory saved isn't worth the cost of dealing with section mismatches. Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-04-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e100.c drivers/net/e1000e/netdev.c
2010-04-22rdma: potential ERR_PTR dereferenceDan Carpenter
In the original code, the "goto out" calls "rdma_destroy_id(cm_id);" That isn't needed here and would cause problems because "cm_id" is an ERR_PTR. The new code just returns directly. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16RDS: Turn down alarming reconnect messagesAndy Grover
RDS's error messages when a connection goes down are a little extreme. A connection may go down, and it will be re-established, and everything is fine. This patch links these messages through rdsdebug(), instead of to printk directly. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16RDS: Do not BUG() on error returned from ib_post_sendAndy Grover
BUGging on a runtime error code should be avoided. This patch also eliminates all other BUG()s that have no real reason to exist. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23RDS: Modularize RDMA and TCP transportsAndy Grover
Enable the building of transports as modules. Also, improve consistency of Kconfig messages in relation to other protocols, and move build dependency on IB from the RDS core code to the rds_rdma module. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05net/rds: Use AF_INET for sin_family fieldJulia Lawall
Elsewhere the sin_family field holds a value with a name of the form AF_..., so it seems reasonable to do so here as well. Also the values of PF_INET and AF_INET are the same. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ struct sockaddr_in sip; @@ ( sip.sin_family == - PF_INET + AF_INET | sip.sin_family != - PF_INET + AF_INET | sip.sin_family = - PF_INET + AF_INET ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20RDS/RDMA: Fix cut-n-paste errors in printks in rdma_transport.cAndy Grover
Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-09RDS: Correct some iw references in rdma_transport.cAndy Grover
Had some lingering instances of _iw_ variable names from when the listen code was centralized into rdma_transport.c Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26RDS: Common RDMA transport codeAndy Grover
Although most of IB and iWARP are separated from each other, there is some common code required to handle their shared CM listen port. This code listens for CM events and then dispatches the event to the appropriate transport, either IB or iWARP. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>