| Age | Commit message (Collapse) | Author |
|---|
|
I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to
be rebuilt. This dependency came through a bogus inclusion in the
file net/flow_offload.h. This patch moves it to the right place.
This patch also removes a lingering rhashtable inclusion in cls_api
created by the same commit.
Fixes: 4e481908c51b ("flow_offload: move tc indirect block to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fragment packets do defrag in tcf_ct_handle_fragments
will clear the skb->cb which make the qdisc_skb_cb clear
too. So the qdsic_skb_cb should be store before defrag and
restore after that.
It also update the pkt_len after all the
fragments finish the defrag to one packet and make the
following actions counter correct.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tcf_block_get() fails inside atm_tc_init(),
atm_tc_put() is called to release the qdisc p->link.q.
But the flow->ref prevents it to do so, as the flow->ref
is still zero.
Fix this by moving the p->link.ref initialization before
tcf_block_get().
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tcf_ct_act execute the tcf_lastuse_update should
be update or the used stats never update
filter protocol ip pref 3 flower chain 0
filter protocol ip pref 3 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 1.1.1.1
ip_flags frag/firstfrag
skip_hw
not_in_hw
action order 1: ct zone 1 nat pipe
index 1 ref 1 bind 1 installed 103 sec used 103 sec
Action statistics:
Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie 4519c04dc64a1a295787aab13b6a50fb
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.
Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).
Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.
Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The user tool modinfo is used to get information on kernel modules, including a
description where it is available.
This patch adds a brief MODULE_DESCRIPTION to the following modules:
9p
drop_monitor
esp4_offload
esp6_offload
fou
fou6
ila
sch_fq
sch_fq_codel
sch_hhf
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.
block->nooffloaddevcnt warning with following dmesg log:
[ 760.667058] #####################################################
[ 760.668186] ## TEST test-ecmp-add-vxlan-encap-disable-sriov.sh ##
[ 760.669179] #####################################################
[ 761.780655] :test: Fedora 30 (Thirty)
[ 761.783794] :test: Linux reg-r-vrt-018-180 5.7.0+
[ 761.822890] :test: NIC ens1f0 FW 16.26.6000 PCI 0000:81:00.0 DEVICE 0x1019 ConnectX-5 Ex
[ 761.860244] mlx5_core 0000:81:00.0 ens1f0: Link up
[ 761.880693] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
[ 762.059732] mlx5_core 0000:81:00.1 ens1f1: Link up
[ 762.234341] :test: unbind vfs of ens1f0
[ 762.257825] :test: Change ens1f0 eswitch (0000:81:00.0) mode to switchdev
[ 762.291363] :test: unbind vfs of ens1f1
[ 762.306914] :test: Change ens1f1 eswitch (0000:81:00.1) mode to switchdev
[ 762.309237] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(LEGACY), nvfs(2), active vports(3)
[ 763.282598] mlx5_core 0000:81:00.1: E-Switch: Supported tc offload range - chains: 4294967294, prios: 4294967295
[ 763.362825] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[ 763.444465] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
[ 763.460088] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[ 763.502586] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[ 763.552429] ens1f1_0: renamed from eth0
[ 763.569569] mlx5_core 0000:81:00.1: E-Switch: Enable: mode(OFFLOADS), nvfs(2), active vports(3)
[ 763.629694] ens1f1_1: renamed from eth1
[ 764.631552] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_0: link becomes ready
[ 764.670841] :test: unbind vfs of ens1f0
[ 764.681966] :test: unbind vfs of ens1f1
[ 764.726762] mlx5_core 0000:81:00.0 ens1f0: Link up
[ 764.766511] mlx5_core 0000:81:00.1 ens1f1: Link up
[ 764.797325] :test: Add multipath vxlan encap rule and disable sriov
[ 764.798544] :test: config multipath route
[ 764.812732] mlx5_core 0000:81:00.0: lag map port 1:2 port 2:2
[ 764.874556] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:2
[ 765.603681] :test: OK
[ 765.659048] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_1: link becomes ready
[ 765.675085] :test: verify rule in hw
[ 765.694237] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
[ 765.711892] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready
[ 766.979230] :test: OK
[ 768.125419] :test: OK
[ 768.127519] :test: - disable sriov ens1f1
[ 768.131160] pci 0000:81:02.2: Removing from iommu group 75
[ 768.132646] pci 0000:81:02.3: Removing from iommu group 76
[ 769.179749] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
[ 769.455627] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:1
[ 769.703990] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[ 769.988637] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
[ 769.990022] :test: - disable sriov ens1f0
[ 769.994922] pci 0000:81:00.2: Removing from iommu group 73
[ 769.997048] pci 0000:81:00.3: Removing from iommu group 74
[ 771.035813] mlx5_core 0000:81:00.0: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
[ 771.339091] ------------[ cut here ]------------
[ 771.340812] WARNING: CPU: 6 PID: 3448 at net/sched/cls_api.c:749 tcf_block_offload_unbind.isra.0+0x5c/0x60
[ 771.341728] Modules linked in: act_mirred act_tunnel_key cls_flower dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mlxfw act_ct nf_flow_table kvm_intel nf_nat kvm nf_conntrack irqbypass crct10dif_pclmul igb crc32_pclmul nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 crc32c_intel ghash_clmulni_intel ptp ipmi_ssif intel_cstate pps_c
ore ses intel_uncore mei_me iTCO_wdt joydev ipmi_si iTCO_vendor_support i2c_i801 enclosure mei ioatdma dca lpc_ich wmi ipmi_devintf pcspkr acpi_power_meter ipmi_msghandler acpi_pad ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas
[ 771.347818] CPU: 6 PID: 3448 Comm: test-ecmp-add-v Not tainted 5.7.0+ #1146
[ 771.348727] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 771.349646] RIP: 0010:tcf_block_offload_unbind.isra.0+0x5c/0x60
[ 771.350553] Code: 4a fd ff ff 83 f8 a1 74 0e 5b 4c 89 e7 5d 41 5c 41 5d e9 07 93 89 ff 8b 83 a0 00 00 00 8d 50 ff 89 93 a0 00 00 00 85 c0 75 df <0f> 0b eb db 0f 1f 44 00 00 41 57 41 56 41 55 41 89 cd 41 54 49 89
[ 771.352420] RSP: 0018:ffffb33144cd3b00 EFLAGS: 00010246
[ 771.353353] RAX: 0000000000000000 RBX: ffff8b37cf4b2800 RCX: 0000000000000000
[ 771.354294] RDX: 00000000ffffffff RSI: ffff8b3b9aad0000 RDI: ffffffff8d5c6e20
[ 771.355245] RBP: ffff8b37eb546948 R08: ffffffffc0b7a348 R09: ffff8b3b9aad0000
[ 771.356189] R10: 0000000000000001 R11: ffff8b3ba7a0a1c0 R12: ffff8b37cf4b2850
[ 771.357123] R13: ffff8b3b9aad0000 R14: ffff8b37cf4b2820 R15: ffff8b37cf4b2820
[ 771.358039] FS: 00007f8a19b6e740(0000) GS:ffff8b3befa00000(0000) knlGS:0000000000000000
[ 771.358965] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 771.359885] CR2: 00007f3afb91c1a0 CR3: 000000045133c004 CR4: 00000000001606e0
[ 771.360825] Call Trace:
[ 771.361764] __tcf_block_put+0x84/0x150
[ 771.362712] ingress_destroy+0x1b/0x20 [sch_ingress]
[ 771.363658] qdisc_destroy+0x3e/0xc0
[ 771.364594] dev_shutdown+0x7a/0xa5
[ 771.365522] rollback_registered_many+0x20d/0x530
[ 771.366458] ? netdev_upper_dev_unlink+0x15d/0x1c0
[ 771.367387] unregister_netdevice_many.part.0+0xf/0x70
[ 771.368310] vxlan_netdevice_event+0xa4/0x110 [vxlan]
[ 771.369454] notifier_call_chain+0x4c/0x70
[ 771.370579] rollback_registered_many+0x2f5/0x530
[ 771.371719] rollback_registered+0x56/0x90
[ 771.372843] unregister_netdevice_queue+0x73/0xb0
[ 771.373982] unregister_netdev+0x18/0x20
[ 771.375168] mlx5e_vport_rep_unload+0x56/0xc0 [mlx5_core]
[ 771.376327] esw_offloads_disable+0x81/0x90 [mlx5_core]
[ 771.377512] mlx5_eswitch_disable_locked.cold+0xcb/0x1af [mlx5_core]
[ 771.378679] mlx5_eswitch_disable+0x44/0x60 [mlx5_core]
[ 771.379822] mlx5_device_disable_sriov+0xad/0xb0 [mlx5_core]
[ 771.380968] mlx5_core_sriov_configure+0xc1/0xe0 [mlx5_core]
[ 771.382087] sriov_numvfs_store+0xfc/0x130
[ 771.383195] kernfs_fop_write+0xce/0x1b0
[ 771.384302] vfs_write+0xb6/0x1a0
[ 771.385410] ksys_write+0x5f/0xe0
[ 771.386500] do_syscall_64+0x5b/0x1d0
[ 771.387569] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path.
Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
assigning a dummy value of 'clock_id' to avoid cancellation of the cycle
timer before its initialization was a temporary solution, and we still
need to handle the case where act_gate timer parameters are changed by
commands like the following one:
# tc action replace action gate <parameters>
the fix consists in the following items:
1) remove the workaround assignment of 'clock_id', and init the list of
entries before the first error path after IDR atomic check/allocation
2) validate 'clock_id' earlier: there is no need to do IDR atomic
check/allocation if we know that 'clock_id' is a bad value
3) use a dedicated function, 'gate_setup_timer()', to ensure that the
timer is cancelled and re-initialized on action overwrite, and also
ensure we initialize the timer in the error path of tcf_gate_init()
v3: improve comment in the error path of tcf_gate_init() (thanks to
Vladimir Oltean)
v2: avoid 'goto' in gate_setup_timer (thanks to Cong Wang)
CC: Ivan Vecera <ivecera@redhat.com>
Fixes: a01c245438c5 ("net/sched: fix a couple of splats in the error path of tfc_gate_init()")
Fixes: a51c328df310 ("net: qos: introduce a gate control flow action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
it is possible to see a KASAN use-after-free, immediately followed by a
NULL dereference crash, with the following command:
# tc action add action gate index 3 cycle-time 100000000ns \
> cycle-time-ext 100000000ns clockid CLOCK_TAI
BUG: KASAN: use-after-free in tcf_action_init_1+0x8eb/0x960
Write of size 1 at addr ffff88810a5908bc by task tc/883
CPU: 0 PID: 883 Comm: tc Not tainted 5.7.0+ #188
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x75/0xa0
print_address_description.constprop.6+0x1a/0x220
kasan_report.cold.9+0x37/0x7c
tcf_action_init_1+0x8eb/0x960
tcf_action_init+0x157/0x2a0
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x2a3/0x39d
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[...]
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 883 Comm: tc Tainted: G B 5.7.0+ #188
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: 0010:tcf_action_fill_size+0xa3/0xf0
[....]
RSP: 0018:ffff88813a48f250 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: 0000000000000094 RCX: ffffffffa47c3eb6
RDX: 000000000000000e RSI: 0000000000000008 RDI: 0000000000000070
RBP: ffff88810a590800 R08: 0000000000000004 R09: ffffed1027491e03
R10: 0000000000000003 R11: ffffed1027491e03 R12: 0000000000000000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88810a590800
FS: 00007f62cae8ce40(0000) GS:ffff888147c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f62c9d20a10 CR3: 000000013a52a000 CR4: 0000000000340ef0
Call Trace:
tcf_action_init+0x172/0x2a0
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x2a3/0x39d
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
this is caused by the test on 'cycletime_ext', that is still unassigned
when the action is newly created. This makes the action .init() return 0
without calling tcf_idr_insert(), hence the UAF + crash.
rework the logic that prevents zero values of cycle-time, as follows:
1) 'tcfg_cycletime_ext' seems to be unused in the action software path,
and it was already possible by other means to obtain non-zero
cycletime and zero cycletime-ext. So, removing that test should not
cause any damage.
2) while at it, we must prevent overwriting configuration data with wrong
ones: use a temporary variable for 'tcfg_cycletime', and validate it
preserving the original semantic (that allowed computing the cycle
time as the sum of all intervals, when not specified by
TCA_GATE_CYCLE_TIME).
3) remove the test on 'tcfg_cycletime', no more useful, and avoid
returning -EFAULT, which did not seem an appropriate return value for
a wrong netlink attribute.
v3: fix uninitialized 'cycletime' (thanks to Vladimir Oltean)
v2: remove useless 'return;' at the end of void gate_get_start_time()
Fixes: a51c328df310 ("net: qos: introduce a gate control flow action")
CC: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, tcf_ct_flow_table_restore_skb is exported by act_ct
module, therefore modules using it will have hard-dependency
on act_ct and will require loading it all the time.
This can lead to an unnecessary overhead on systems that do not
use hardware connection tracking action (ct_metadata action) in
the first place.
To relax the hard-dependency between the modules, we unexport this
function and make it a static inline one.
Fixes: 30b0cf90c6dd ("net/sched: act_ct: Support restoring conntrack info on skbs")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since the quiesce/activate rework, __netdev_watchdog_up() is directly
called in the ucc_geth driver.
Unfortunately, this function is not available for modules and thus
ucc_geth cannot be built as a module anymore. Fix it by exporting
__netdev_watchdog_up().
Since the commit introducing the regression was backported to stable
branches, this one should ideally be as well.
Fixes: 79dde73cf9bc ("net/ethernet/freescale: rework quiesce/activate for ucc_geth")
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Compiling with W=1 gives the following warning:
net/sched/cls_flower.c:731:1: warning: ‘mpls_opts_policy’ defined but not used [-Wunused-const-variable=]
The TCA_FLOWER_KEY_MPLS_OPTS contains a list of
TCA_FLOWER_KEY_MPLS_OPTS_LSE. Therefore, the attributes all have the
same type and we can't parse the list with nla_parse*() and have the
attributes validated automatically using an nla_policy.
fl_set_key_mpls_opts() properly verifies that all attributes in the
list are TCA_FLOWER_KEY_MPLS_OPTS_LSE. Then fl_set_key_mpls_lse()
uses nla_parse_nested() on all these attributes, thus verifying that
they have the NLA_F_NESTED flag. So we can safely drop the
mpls_opts_policy.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fl_flow_key structure is around 500 bytes, so having two of them
on the stack in one function now exceeds the warning limit after an
otherwise correct change:
net/sched/cls_flower.c:298:12: error: stack frame size of 1056 bytes in function 'fl_classify' [-Werror,-Wframe-larger-than=]
I suspect the fl_classify function could be reworked to only have one
of them on the stack and modify it in place, but I could not work out
how to do that.
As a somewhat hacky workaround, move one of them into an out-of-line
function to reduce its scope. This does not necessarily reduce the stack
usage of the outer function, but at least the second copy is removed
from the stack during most of it and does not add up to whatever is
called from there.
I now see 552 bytes of stack usage for fl_classify(), plus 528 bytes
for fl_mask_lookup().
Fixes: 58cff782cc55 ("flow_dissector: Parse multiple MPLS Label Stack Entries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drivers do not register to netdev events to set up indirect blocks
anymore. Remove __flow_indr_block_cb_register() and
__flow_indr_block_cb_unregister().
The frontends set up the callbacks through flow_indr_dev_setup_block()
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update existing frontends to use flow_indr_dev_setup_offload().
This new function must be called if ->ndo_setup_tc is unset to deal
with tunnel devices.
If there is no driver that is subscribed to new tunnel device
flow_block bindings, then this function bails out with EOPNOTSUPP.
If the driver module is removed, the ->cleanup() callback removes the
entries that belong to this tunnel device. This cleanup procedures is
triggered when the device unregisters the tunnel device offload handler.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper function to initialize the flow_block_offload structure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
trying to configure TC 'act_gate' rules with invalid control actions, the
following splat can be observed:
general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 2143 Comm: tc Not tainted 5.7.0-rc6+ #168
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: 0010:hrtimer_active+0x56/0x290
[...]
Call Trace:
hrtimer_try_to_cancel+0x6d/0x330
hrtimer_cancel+0x11/0x20
tcf_gate_cleanup+0x15/0x30 [act_gate]
tcf_action_cleanup+0x58/0x170
__tcf_action_put+0xb0/0xe0
__tcf_idr_release+0x68/0x90
tcf_gate_init+0x7c7/0x19a0 [act_gate]
tcf_action_init_1+0x60f/0x960
tcf_action_init+0x157/0x2a0
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x2a3/0x39d
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x121/0x350
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
this is caused by hrtimer_cancel(), running before hrtimer_init(). Fix it
ensuring to call hrtimer_cancel() only if clockid is valid, and the timer
has been initialized. After fixing this splat, the same error path causes
another problem:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 980 Comm: tc Not tainted 5.7.0-rc6+ #168
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: 0010:release_entry_list+0x4a/0x240 [act_gate]
[...]
Call Trace:
tcf_action_cleanup+0x58/0x170
__tcf_action_put+0xb0/0xe0
__tcf_idr_release+0x68/0x90
tcf_gate_init+0x7ab/0x19a0 [act_gate]
tcf_action_init_1+0x60f/0x960
tcf_action_init+0x157/0x2a0
tcf_action_add+0xd9/0x2f0
tc_ctl_action+0x2a3/0x39d
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x121/0x350
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
the problem is similar: tcf_action_cleanup() was trying to release a list
without initializing it first. Ensure that INIT_LIST_HEAD() is called for
every newly created 'act_gate' action, same as what was done to 'act_ife'
with commit 44c23d71599f ("net/sched: act_ife: initalize ife->metalist
earlier").
Fixes: a51c328df310 ("net: qos: introduce a gate control flow action")
CC: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While the other fq-based qdiscs take advantage of skb->hash and doesn't
recompute it if it is already set, sch_cake does not.
This was a deliberate choice because sch_cake hashes various parts of the
packet header to support its advanced flow isolation modes. However,
foregoing the use of skb->hash entirely loses a few important benefits:
- When skb->hash is set by hardware, a few CPU cycles can be saved by not
hashing again in software.
- Tunnel encapsulations will generally preserve the value of skb->hash from
before the encapsulation, which allows flow-based qdiscs to distinguish
between flows even though the outer packet header no longer has flow
information.
It turns out that we can preserve these desirable properties in many cases,
while still supporting the advanced flow isolation properties of sch_cake.
This patch does so by reusing the skb->hash value as the flow_hash part of
the hashing procedure in cake_hash() only in the following conditions:
- If the skb->hash is marked as covering the flow headers (skb->l4_hash is
set)
AND
- NAT header rewriting is either disabled, or did not change any values
used for hashing. The latter is important to match local-origin packets
such as those of a tunnel endpoint.
The immediate motivation for fixing this was the recent patch to WireGuard
to preserve the skb->hash on encapsulation. As such, this is also what I
tested against; with this patch, added latency under load for competing
flows drops from ~8 ms to sub-1ms on an RRUL test over a WireGuard tunnel
going through a virtual link shaped to 1Gbps using sch_cake. This matches
the results we saw with a similar setup using sch_fq_codel when testing the
WireGuard patch.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resetting old qdisc on dev_queue->qdisc_sleeping in
dev_qdisc_reset() is redundant, because this qdisc,
even if not same with dev_queue->qdisc, is reset via
qdisc_put() right after calling dev_graft_qdisc() when
hitting refcnt 0.
This is very easy to observe with qdisc_reset() tracepoint
and stack traces.
Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Except for sch_mq and sch_mqprio, each dev queue points to the
same root qdisc, so when we reset the dev queues with
netdev_for_each_tx_queue() we end up resetting the same instance
of the root qdisc for multiple times.
Avoid this by checking the __QDISC_STATE_DEACTIVATED bit in
each iteration, so for sch_mq/sch_mqprio, we still reset all
of them like before, for the rest, we only reset it once.
Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With this tracepoint, we could know when qdisc's are created,
especially those default qdisc's.
Sample output:
tc-736 [001] ...1 56.230107: qdisc_create: dev=ens3 kind=pfifo parent=1:0
tc-736 [001] ...1 56.230113: qdisc_create: dev=ens3 kind=hfsc parent=ffff:ffff
tc-738 [001] ...1 56.256816: qdisc_create: dev=ens3 kind=pfifo parent=1:100
tc-739 [001] ...1 56.267584: qdisc_create: dev=ens3 kind=pfifo parent=1:200
tc-740 [001] ...1 56.279649: qdisc_create: dev=ens3 kind=fq_codel parent=1:100
tc-741 [001] ...1 56.289996: qdisc_create: dev=ens3 kind=pfifo_fast parent=1:200
tc-745 [000] .N.1 111.687483: qdisc_create: dev=ens3 kind=ingress parent=ffff:fff1
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two tracepoints for qdisc_reset() and qdisc_destroy() to track
qdisc resetting and destroying.
Sample output:
tc-756 [000] ...3 138.355662: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-756 [000] ...1 138.355720: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-756 [000] ...1 138.355867: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-756 [000] ...1 138.355930: qdisc_destroy: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-757 [000] ...2 143.073780: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
tc-757 [000] ...1 143.073878: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
tc-757 [000] ...1 143.074114: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
tc-757 [000] ...1 143.074228: qdisc_destroy: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qdisc_destroy() calls ops->reset() and cleans up qdisc->gso_skb
and qdisc->skb_bad_txq, these are nearly same with qdisc_reset(),
so just call it directly, and cosolidate the code for the next
patch.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
this command hangs forever:
# tc qdisc add dev eth0 root fq_pie flows 65536
watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028]
[...]
CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ #167
RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie]
Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48
RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff
RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590
RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699
R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0
R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8
FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0
Call Trace:
qdisc_create+0x3fd/0xeb0
tc_modify_qdisc+0x3be/0x14a0
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x121/0x350
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
we can't accept 65536 as a valid number for 'nflows', because the loop on
'idx' in fq_pie_init() will never end. The extack message is correct, but
it doesn't say that 0 is not a valid number for 'flows': while at it, fix
this also. Add a tdc selftest to check correct validation of 'flows'.
CC: Ivan Vecera <ivecera@redhat.com>
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With struct flow_dissector_key_mpls now recording the first
FLOW_DIS_MPLS_MAX labels, we can extend Flower to filter on any of
these LSEs independently.
In order to avoid creating new netlink attributes for every possible
depth, let's define a new TCA_FLOWER_KEY_MPLS_OPTS nested attribute
that contains the list of LSEs to match. Each LSE is represented by
another attribute, TCA_FLOWER_KEY_MPLS_OPTS_LSE, which then contains
the attributes representing the depth and the MPLS fields to match at
this depth (label, TTL, etc.).
For each MPLS field, the mask is always set to all-ones, as this is
what the original API did. We could allow user configurable masks in
the future if there is demand for more flexibility.
The new API also allows to only specify an LSE depth. In that case,
Flower only verifies that the MPLS label stack depth is greater or
equal to the provided depth (that is, an LSE exists at this depth).
Filters that only match on one (or more) fields of the first LSE are
dumped using the old netlink attributes, to avoid confusing user space
programs that don't understand the new API.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current MPLS dissector only parses the first MPLS Label Stack
Entry (second LSE can be parsed too, but only to set a key_id).
This patch adds the possibility to parse several LSEs by making
__skb_flow_dissect_mpls() return FLOW_DISSECT_RET_PROTO_AGAIN as long
as the Bottom Of Stack bit hasn't been seen, up to a maximum of
FLOW_DIS_MPLS_MAX entries.
FLOW_DIS_MPLS_MAX is arbitrarily set to 7. This should be enough for
many practical purposes, without wasting too much space.
To record the parsed values, flow_dissector_key_mpls is modified to
store an array of stack entries, instead of just the values of the
first one. A bit field, "used_lses", is also added to keep track of
the LSEs that have been set. The objective is to avoid defining a
new FLOW_DISSECTOR_KEY_MPLS_XX for each level of the MPLS stack.
TC flower is adapted for the new struct flow_dissector_key_mpls layout.
Matching on several MPLS Label Stack Entries will be added in the next
patch.
The NFP and MLX5 drivers are also adapted: nfp_flower_compile_mac() and
mlx5's parse_tunnel() now verify that the rule only uses the first LSE
and fail if it doesn't.
Finally, the behaviour of the FLOW_DISSECTOR_KEY_MPLS_ENTROPY key is
slightly modified. Instead of recording the first Entropy Label, it
now records the last one. This shouldn't have any consequences since
there doesn't seem to have any user of FLOW_DISSECTOR_KEY_MPLS_ENTROPY
in the tree. We'd probably better do a hash of all parsed MPLS labels
instead (excluding reserved labels) anyway. That'd give better entropy
and would probably also simplify the code. But that's not the purpose
of this patch, so I'm keeping that as a future possible improvement.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement tcf_proto_ops->terse_dump() callback for flower classifier. Only
dump handle, flags and action data in terse mode.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend tcf_action_dump() with boolean argument 'terse' that is used to
request terse-mode action dump. In terse mode only essential data needed to
identify particular action (action kind, cookie, etc.) and its stats is put
to resulting skb and everything else is omitted. Implement
tcf_exts_terse_dump() helper in cls API that is intended to be used to
request terse dump of all exts (actions) attached to the filter.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new TCA_DUMP_FLAGS attribute and use it in cls API to request terse
filter output from classifiers with TCA_DUMP_FLAGS_TERSE flag. This option
is intended to be used to improve performance of TC filter dump when
userland only needs to obtain stats and not the whole classifier/action
data. Extend struct tcf_proto_ops with new terse_dump() callback that must
be defined by supporting classifier implementations.
Support of the options in specific classifiers and actions is
implemented in following patches in the series.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts were all overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds FLOW_ACTION_HW_STATS_DONT_CARE which tells the driver
that the frontend does not need counters, this hw stats type request
never fails. The FLOW_ACTION_HW_STATS_DISABLED type explicitly requests
the driver to disable the stats, however, if the driver cannot disable
counters, it bails out.
TCA_ACT_HW_STATS_* maintains the 1:1 mapping with FLOW_ACTION_HW_STATS_*
except by disabled which is mapped to FLOW_ACTION_HW_STATS_DISABLED
(this is 0 in tc). Add tc_act_hw_stats() to perform the mapping between
TCA_ACT_HW_STATS_* and FLOW_ACTION_HW_STATS_*.
Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Suggested by Cong Wang.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no callers in-tree anymore since commit 5952fde10c35 ("net:
sched: choke: remove dead filter classify code")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch reverts the folowing commits:
commit 064ff66e2bef84f1153087612032b5b9eab005bd
"bonding: add missing netdev_update_lockdep_key()"
commit 53d374979ef147ab51f5d632dfe20b14aebeccd0
"net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()"
commit 1f26c0d3d24125992ab0026b0dab16c08df947c7
"net: fix kernel-doc warning in <linux/netdevice.h>"
commit ab92d68fc22f9afab480153bd82a20f6e2533769
"net: core: add generic lockdep keys"
but keeps the addr_list_lock_key because we still lock
addr_list_lock nestedly on stack devices, unlikely xmit_lock
this is safe because we don't take addr_list_lock on any fast
path.
Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
QUIC servers would like to use SO_TXTIME, without having CAP_NET_ADMIN,
to efficiently pace UDP packets.
As far as sch_fq is concerned, we need to add safety checks, so
that a buggy application does not fill the qdisc with packets
having delivery time far in the future.
This patch adds a configurable horizon (default: 10 seconds),
and a configurable policy when a packet is beyond the horizon
at enqueue() time:
- either drop the packet (default policy)
- or cap its delivery time to the horizon.
$ tc -s -d qd sh dev eth0
qdisc fq 8022: root refcnt 257 limit 10000p flow_limit 100p buckets 1024
orphan_mask 1023 quantum 10Kb initial_quantum 51160b low_rate_threshold 550Kbit
refill_delay 40.0ms timer_slack 10.000us horizon 10.000s
Sent 1234215879 bytes 837099 pkt (dropped 21, overlimits 0 requeues 6)
backlog 0b 0p requeues 6
flows 1191 (inactive 1177 throttled 0)
gc 0 highprio 0 throttled 692 latency 11.480us
pkts_too_long 0 alloc_errors 0 horizon_drops 21 horizon_caps 0
v2: fixed an overflow on 32bit kernels in fq_init(), reported
by kbuild test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we tell kernel to dump filters from root (ffff:ffff),
those filters on ingress (ffff:0000) are matched, but their
true parents must be dumped as they are. However, kernel
dumps just whatever we tell it, that is either ffff:ffff
or ffff:0000:
$ nl-cls-list --dev=dummy0 --parent=root
cls basic dev dummy0 id none parent root prio 49152 protocol ip match-all
cls basic dev dummy0 id :1 parent root prio 49152 protocol ip match-all
$ nl-cls-list --dev=dummy0 --parent=ffff:
cls basic dev dummy0 id none parent ffff: prio 49152 protocol ip match-all
cls basic dev dummy0 id :1 parent ffff: prio 49152 protocol ip match-all
This is confusing and misleading, more importantly this is
a regression since 4.15, so the old behavior must be restored.
And, when tc filters are installed on a tc class, the parent
should be the classid, rather than the qdisc handle. Commit
edf6711c9840 ("net: sched: remove classid and q fields from tcf_proto")
removed the classid we save for filters, we can just restore
this classid in tcf_block.
Steps to reproduce this:
ip li set dev dummy0 up
tc qd add dev dummy0 ingress
tc filter add dev dummy0 parent ffff: protocol arp basic action pass
tc filter show dev dummy0 root
Before this patch:
filter protocol arp pref 49152 basic
filter protocol arp pref 49152 basic handle 0x1
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
After this patch:
filter parent ffff: protocol arp pref 49152 basic
filter parent ffff: protocol arp pref 49152 basic handle 0x1
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
Fixes: a10fa20101ae ("net: sched: propagate q and parent from caller down to tcf_fill_node")
Fixes: edf6711c9840 ("net: sched: remove classid and q fields from tcf_proto")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently if the default qdisc setup/init fails, the device ends up with
qdisc "noop", which causes all TX packets to get dropped.
With the introduction of sysctl net/core/default_qdisc it is possible
to change the default qdisc to be more advanced, which opens for the
possibility that Qdisc_ops->init() can fail.
This patch detect these kind of failures, and choose to fallback to
qdisc "noqueue", which is so simple that its init call will not fail.
This allows the interface to continue functioning.
V2:
As this also captures memory failures, which are transient, the
device is not kept in IFF_NO_QUEUE state. This allows the net_device
to retry to default qdisc assignment.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not assume the attribute has the right size.
Fixes: aea5f654e6b7 ("net/sched: add skbprio scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The prefetch() done in fq_dequeue() can be done a bit earlier
after the refactoring of the code done in the prior patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This refactors the code to not call fq_peek() from fq_dequeue_head()
since the caller can provide the skb.
Also rename fq_dequeue_head() to fq_dequeue_skb() because 'head' is
a bit vague, given the skb could come from t_root rb-tree.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fq_gc() already builds a small array of pointers, so using
kmem_cache_free_bulk() needs very little change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sizeof(struct fq_flow) is 112 bytes on 64bit arches.
This means that half of them use two cache lines, but 50% use
three cache lines.
This patch adds cache line alignment, and makes sure that only
the first cache line is touched by fq_enqueue(), which is more
expensive that fq_dequeue() in general.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
