summaryrefslogtreecommitdiff
path: root/net/sctp
AgeCommit message (Collapse)Author
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-01Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Introduce crypto_shash_tfm_digest() and use it wherever possible. - Fix use-after-free and race in crypto_spawn_alg. - Add support for parallel and batch requests to crypto_engine. Algorithms: - Update jitter RNG for SP800-90B compliance. - Always use jitter RNG as seed in drbg. Drivers: - Add Arm CryptoCell driver cctrng. - Add support for SEV-ES to the PSP driver in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits) crypto: hisilicon - fix driver compatibility issue with different versions of devices crypto: engine - do not requeue in case of fatal error crypto: cavium/nitrox - Fix a typo in a comment crypto: hisilicon/qm - change debugfs file name from qm_regs to regs crypto: hisilicon/qm - add DebugFS for xQC and xQE dump crypto: hisilicon/zip - add debugfs for Hisilicon ZIP crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC crypto: hisilicon/qm - add debugfs to the QM state machine crypto: hisilicon/qm - add debugfs for QM crypto: stm32/crc32 - protect from concurrent accesses crypto: stm32/crc32 - don't sleep in runtime pm crypto: stm32/crc32 - fix multi-instance crypto: stm32/crc32 - fix run-time self test issue. crypto: stm32/crc32 - fix ext4 chksum BUG_ON() crypto: hisilicon/zip - Use temporary sqe when doing work crypto: hisilicon - add device error report through abnormal irq crypto: hisilicon - remove codes of directly report device errors through MSI crypto: hisilicon - QM memory management optimization crypto: hisilicon - unify initial value assignment into QM ...
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: add a new bind_add methodChristoph Hellwig
The SCTP protocol allows to bind multiple address to a socket. That feature is currently only exposed as a socket option. Add a bind_add method struct proto that allows to bind additional addresses, and switch the dlm code to use the method instead of going through the socket option from kernel space. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29sctp: refactor sctp_setsockopt_bindxChristoph Hellwig
Split out a sctp_setsockopt_bindx_kernel that takes a kernel pointer to the sockaddr and make sctp_setsockopt_bindx a small wrapper around it. This prepares for adding a new bind_add proto op. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28sctp: check assoc before SCTP_ADDR_{MADE_PRIM, ADDED} eventJonas Falkevik
Make sure SCTP_ADDR_{MADE_PRIM,ADDED} are sent only for associations that have been established. These events are described in rfc6458#section-6.1 SCTP_PEER_ADDR_CHANGE: This tag indicates that an address that is part of an existing association has experienced a change of state (e.g., a failure or return to service of the reachability of an endpoint via a specific transport address). Signed-off-by: Jonas Falkevik <jonas.falkevik@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27sctp: fix typo sctp_ulpevent_nofity_peer_addr_changeJonas Falkevik
change typo in function name "nofity" to "notify" sctp_ulpevent_nofity_peer_addr_change -> sctp_ulpevent_notify_peer_addr_change Signed-off-by: Jonas Falkevik <jonas.falkevik@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: sctp: Fix spelling in Kconfig helpChris Packham
Change 'handeled' to 'handled' in the Kconfig help for SCTP. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and ↵Jere Leppänen
socket is closed Commit bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") starts shutdown when an association is restarted, if in SHUTDOWN-PENDING state and the socket is closed. However, the rationale stated in that commit applies also when in SHUTDOWN-SENT state - we don't want to move an association to ESTABLISHED state when the socket has been closed, because that results in an association that is unreachable from user space. The problem scenario: 1. Client crashes and/or restarts. 2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost. 3. Client reconnects using the same addresses and ports. 4. Server's association is restarted. The association and the socket move to ESTABLISHED state, even though the server process has closed its descriptor. Also, after step 4 when the server process exits, some resources are leaked in an attempt to release the underlying inet sock structure in ESTABLISHED state: IPv4: Attempt to release TCP socket in state 1 00000000377288c7 Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if an association is restarted in SHUTDOWN-SENT state and the socket is closed, then start shutdown and don't move the association or the socket to ESTABLISHED state. Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19sctp: Don't add the shutdown timer if its already been addedNeil Horman
This BUG halt was reported a while back, but the patch somehow got missed: PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn" #0 [f418dd28] crash_kexec at c04a7d8c #1 [f418dd7c] oops_end at c0863e02 #2 [f418dd90] do_invalid_op at c040aaca #3 [f418de28] error_code (via invalid_op) at c08631a5 EAX: f34baac0 EBX: 00000090 ECX: f418deb0 EDX: f5542950 EBP: 00000000 DS: 007b ESI: f34ba800 ES: 007b EDI: f418dea0 GS: 00e0 CS: 0060 EIP: c046fa5e ERR: ffffffff EFLAGS: 00010286 #4 [f418de5c] add_timer at c046fa5e #5 [f418de68] sctp_do_sm at f8db8c77 [sctp] #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp] #7 [f418df48] inet_shutdown at c080baf9 #8 [f418df5c] sys_shutdown at c079eedf #9 [f418df70] sys_socketcall at c079fe88 EAX: ffffffda EBX: 0000000d ECX: bfceea90 EDX: 0937af98 DS: 007b ESI: 0000000c ES: 007b EDI: b7150ae4 SS: 007b ESP: bfceea7c EBP: bfceeaa8 GS: 0033 CS: 0073 EIP: b775c424 ERR: 00000066 EFLAGS: 00000282 It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called. Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration) Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-18ipv6: move SIOCADDRT and SIOCDELRT handling into ->compat_ioctlChristoph Hellwig
To prepare removing the global routing_ioctl hack start lifting the code into a newly added ipv6 ->compat_ioctl handler. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-08sctp: use crypto_shash_tfm_digest()Eric Biggers
Instead of manually allocating a 'struct shash_desc' on the stack and calling crypto_shash_digest(), switch to using the new helper function crypto_shash_tfm_digest() which does this for us. Cc: linux-sctp@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-28Merge branch 'work.sysctl' of ↵Daniel Borkmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler methods to take kernel pointers instead. It gets rid of the set_fs address space overrides used by BPF. As per discussion, pull in the feature branch into bpf-next as it relates to BPF sysctl progs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-22sctp: Fix SHUTDOWN CTSN Ack in the peer restart caseJere Leppänen
When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore. Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN. Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22sctp: Fix bundling of SHUTDOWN with COOKIE-ACKJere Leppänen
When we start shutdown in sctp_sf_do_dupcook_a(), we want to bundle the SHUTDOWN with the COOKIE-ACK to ensure that the peer receives them at the same time and in the correct order. This bundling was broken by commit 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc"), which assigns a transport for the COOKIE-ACK, but not for the SHUTDOWN. Fix this by passing a reference to the COOKIE-ACK chunk as an argument to sctp_sf_do_9_2_start_shutdown() and onward to sctp_make_shutdown(). This way the SHUTDOWN chunk is assigned the same transport as the COOKIE-ACK chunk, which allows them to be bundled. In sctp_sf_do_9_2_start_shutdown(), the void *arg parameter was previously unused. Now that we're taking it into use, it must be a valid pointer to a chunk, or NULL. There is only one call site where it's not, in sctp_sf_autoclose_timer_expire(). Fix that too. Fixes: 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-03-29sctp: fix possibly using a bad saddr with a given dstMarcelo Ricardo Leitner
Under certain circumstances, depending on the order of addresses on the interfaces, it could be that sctp_v[46]_get_dst() would return a dst with a mismatched struct flowi. For example, if when walking through the bind addresses and the first one is not a match, it saves the dst as a fallback (added in 410f03831c07), but not the flowi. Then if the next one is also not a match, the previous dst will be returned but with the flowi information for the 2nd address, which is wrong. The fix is to use a locally stored flowi that can be used for such attempts, and copy it to the parameter only in case it is a possible match, together with the corresponding dst entry. The patch updates IPv6 code mostly just to be in sync. Even though the issue is also present there, it fallback is not expected to work with IPv6. Fixes: 410f03831c07 ("sctp: add routing output fallback") Reported-by: Jin Meng <meng.a.jin@nokia-sbell.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29sctp: fix refcount bug in sctp_wfreeQiujun Huang
We should iterate over the datamsgs to move all chunks(skbs) to newsk. The following case cause the bug: for the trouble SKB, it was in outq->transmitted list sctp_outq_sack sctp_check_transmitted SKB was moved to outq->sacked list then throw away the sack queue SKB was deleted from outq->sacked (but it was held by datamsg at sctp_datamsg_to_asoc So, sctp_wfree was not called here) then migrate happened sctp_for_each_tx_datachunk( sctp_clear_owner_w); sctp_assoc_migrate(); sctp_for_each_tx_datachunk( sctp_set_owner_w); SKB was not in the outq, and was not changed to newsk finally __sctp_outq_teardown sctp_chunk_put (for another skb) sctp_datamsg_put __kfree_skb(msg->frag_list) sctp_wfree (for SKB) SKB->sk was still oldsk (skb->sk != asoc->base.sk). Reported-and-tested-by: syzbot+cea71eec5d6de256d54d@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Acked-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08inet_diag: return classid for all socket typesDmitry Yakunin
In commit 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") croup classid reporting was fixed. But this works only for TCP sockets because for other socket types icsk parameter can be NULL and classid code path is skipped. This change moves classid handling to inet_diag_msg_attrs_fill() function. Also inet_diag_msg_attrs_size() helper was added and addends in nlmsg_new() were reordered to save order from inet_sk_diag_fill(). Fixes: 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-02-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 41 non-merge commits during the last 7 day(s) which contain a total of 49 files changed, 1383 insertions(+), 499 deletions(-). The main changes are: 1) BPF and Real-Time nicely co-exist. 2) bpftool feature improvements. 3) retrieve bpf_sk_storage via INET_DIAG. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27inet_diag: Move the INET_DIAG_REQ_BYTECODE nlattr to cb->dataMartin KaFai Lau
The INET_DIAG_REQ_BYTECODE nlattr is currently re-found every time when the "dump()" is re-started. In a latter patch, it will also need to parse the new INET_DIAG_REQ_SK_BPF_STORAGES nlattr to learn the map_fds. Thus, this patch takes this chance to store the parsed nlattr in cb->data during the "start" time of a dump. By doing this, the "bc" argument also becomes unnecessary and is removed. Also, the two copies of the INET_DIAG_REQ_BYTECODE parsing-audit logic between compat/current version can be consolidated to one. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230415.1975555-1-kafai@fb.com
2020-02-27inet_diag: Refactor inet_sk_diag_fill(), dump(), and dump_one()Martin KaFai Lau
In a latter patch, there is a need to update "cb->min_dump_alloc" in inet_sk_diag_fill() as it learns the diffierent bpf_sk_storages stored in a sk while dumping all sk(s) (e.g. tcp_hashinfo). The inet_sk_diag_fill() currently does not take the "cb" as an argument. One of the reason is inet_sk_diag_fill() is used by both dump_one() and dump() (which belong to the "struct inet_diag_handler". The dump_one() interface does not pass the "cb" along. This patch is to make dump_one() pass a "cb". The "cb" is created in inet_diag_cmd_exact(). The "nlh" and "in_skb" are stored in "cb" as the dump() interface does. The total number of args in inet_sk_diag_fill() is also cut from 10 to 7 and that helps many callers to pass fewer args. In particular, "struct user_namespace *user_ns", "u32 pid", and "u32 seq" can be replaced by accessing "cb->nlh" and "cb->skb". A similar argument reduction is also made to inet_twsk_diag_fill() and inet_req_diag_fill(). inet_csk_diag_dump() and inet_csk_diag_fill() are also removed. They are mostly equivalent to inet_sk_diag_fill(). Their repeated usages are very limited. Thus, inet_sk_diag_fill() is directly used in those occasions. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230409.1975173-1-kafai@fb.com
2020-02-24sctp: Add missing annotation for sctp_transport_walk_stop()Jules Irenge
Sparse reports a warning at sctp_transport_walk_stop() warning: context imbalance in sctp_transport_walk_stop - wrong count at exit The root cause is the missing annotation at sctp_transport_walk_stop() Add the missing __releases(RCU) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24sctp: Add missing annotation for sctp_transport_walk_start()Jules Irenge
Sparse reports a warning at sctp_transport_walk_start() warning: context imbalance in sctp_transport_walk_start - wrong count at exit The root cause is the missing annotation at sctp_transport_walk_start() Add the missing __acquires(RCU) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24sctp: Add missing annotation for sctp_err_finish()Jules Irenge
Sparse reports a warning at sctp_err_finish() warning: context imbalance in sctp_err_finish() - unexpected unlock The root cause is a missing annotation at sctp_err_finish() Add the missing __releases(&((__sk)->sk_lock.slock)) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17sctp: move the format error check out of __sctp_sf_do_9_1_abortXin Long
When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLYXin Long
This patch is to fix a memleak caused by no place to free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq with an allocated chunk in cmd->obj.chunk. So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on the cmd seq when any cmd returns error. While at it, also remove 'nomem' label. Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30sctp: add enabled check for path tracepoint loop.Kevin Kou
sctp_outq_sack is the main function handles SACK, it is called very frequently. As the commit "move trace_sctp_probe_path into sctp_outq_sack" added below code to this function, sctp tracepoint is disabled most of time, but the loop of transport list will be always called even though the tracepoint is disabled, this is unnecessary. + /* SCTP path tracepoint for congestion control debugging. */ + list_for_each_entry(transport, transport_list, transports) { + trace_sctp_probe_path(transport, asoc); + } This patch is to add tracepoint enabled check at outside of the loop of transport list, and avoid traversing the loop when trace is disabled, it is a small optimization. Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27sctp: do trace_sctp_probe after SACK validation and checkKevin Kou
The function sctp_sf_eat_sack_6_2 now performs the Verification Tag validation, Chunk length validation, Bogu check, and also the detection of out-of-order SACK based on the RFC2960 Section 6.2 at the beginning, and finally performs the further processing of SACK. The trace_sctp_probe now triggered before the above necessary validation and check. this patch is to do the trace_sctp_probe after the chunk sanity tests, but keep doing trace if the SACK received is out of order, for the out-of-order SACK is valuable to congestion control debugging. v1->v2: - keep doing SCTP trace if the SACK is out of order as Marcelo's suggestion. v2->v3: - regenerate the patch as v2 generated on top of v1, and add 'net-next' tag to the new one as Marcelo's comments. Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26sctp: move trace_sctp_probe_path into sctp_outq_sackKevin Kou
The original patch bringed in the "SCTP ACK tracking trace event" feature was committed at Dec.20, 2017, it replaced jprobe usage with trace events, and bringed in two trace events, one is TRACE_EVENT(sctp_probe), another one is TRACE_EVENT(sctp_probe_path). The original patch intended to trigger the trace_sctp_probe_path in TRACE_EVENT(sctp_probe) as below code, +TRACE_EVENT(sctp_probe, + + TP_PROTO(const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + struct sctp_chunk *chunk), + + TP_ARGS(ep, asoc, chunk), + + TP_STRUCT__entry( + __field(__u64, asoc) + __field(__u32, mark) + __field(__u16, bind_port) + __field(__u16, peer_port) + __field(__u32, pathmtu) + __field(__u32, rwnd) + __field(__u16, unack_data) + ), + + TP_fast_assign( + struct sk_buff *skb = chunk->skb; + + __entry->asoc = (unsigned long)asoc; + __entry->mark = skb->mark; + __entry->bind_port = ep->base.bind_addr.port; + __entry->peer_port = asoc->peer.port; + __entry->pathmtu = asoc->pathmtu; + __entry->rwnd = asoc->peer.rwnd; + __entry->unack_data = asoc->unack_data; + + if (trace_sctp_probe_path_enabled()) { + struct sctp_transport *sp; + + list_for_each_entry(sp, &asoc->peer.transport_addr_list, + transports) { + trace_sctp_probe_path(sp, asoc); + } + } + ), But I found it did not work when I did testing, and trace_sctp_probe_path had no output, I finally found that there is trace buffer lock operation(trace_event_buffer_reserve) in include/trace/trace_events.h: static notrace void \ trace_event_raw_event_##call(void *__data, proto) \ { \ struct trace_event_file *trace_file = __data; \ struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\ struct trace_event_buffer fbuffer; \ struct trace_event_raw_##call *entry; \ int __data_size; \ \ if (trace_trigger_soft_disabled(trace_file)) \ return; \ \ __data_size = trace_event_get_offsets_##call(&__data_offsets, args); \ \ entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ \ trace_event_buffer_commit(&fbuffer); \ } The reason caused no output of trace_sctp_probe_path is that trace_sctp_probe_path written in TP_fast_assign part of TRACE_EVENT(sctp_probe), and it will be placed( { assign; } ) after the trace_event_buffer_reserve() when compiler expands Macro, entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ so trace_sctp_probe_path finally can not acquire trace_event_buffer and return no output, that is to say the nest of tracepoint entry function is not allowed. The function call flow is: trace_sctp_probe() -> trace_event_raw_event_sctp_probe() -> lock buffer -> trace_sctp_probe_path() -> trace_event_raw_event_sctp_probe_path() --nested -> buffer has been locked and return no output. This patch is to remove trace_sctp_probe_path from the TP_fast_assign part of TRACE_EVENT(sctp_probe) to avoid the nest of entry function, and trigger sctp_probe_path_trace in sctp_outq_sack. After this patch, you can enable both events individually, # cd /sys/kernel/debug/tracing # echo 1 > events/sctp/sctp_probe/enable # echo 1 > events/sctp/sctp_probe_path/enable Or, you can enable all the events under sctp. # echo 1 > events/sctp/enable Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu
The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24sctp: fix err handling of stream initializationMarcelo Ricardo Leitner
The fix on 951c6db954a1 fixed the issued reported there but introduced another. When the allocation fails within sctp_stream_init() it is okay/necessary to free the genradix. But it is also called when adding new streams, from sctp_send_add_streams() and sctp_process_strreset_addstrm_in() and in those situations it cannot just free the genradix because by then it is a fully operational association. The fix here then is to only free the genradix in sctp_stream_init() and on those other call sites move on with what it already had and let the subsequent error handling to handle it. Tested with the reproducers from this report and the previous one, with lksctp-tools and sctp-tests. Reported-by: syzbot+9a1bc632e78a1a98488b@syzkaller.appspotmail.com Fixes: 951c6db954a1 ("sctp: fix memleak on err handling of stream initialization") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17sctp: fix memleak on err handling of stream initializationMarcelo Ricardo Leitner
syzbot reported a memory leak when an allocation fails within genradix_prealloc() for output streams. That's because genradix_prealloc() leaves initialized members initialized when the issue happens and SCTP stack will abort the current initialization but without cleaning up such members. The fix here is to always call genradix_free() when genradix_prealloc() fails, for output and also input streams, as it suffers from the same issue. Reported-by: syzbot+772d9e36c490b18d51d1@syzkaller.appspotmail.com Fixes: 2075e50caf5e ("sctp: convert to genradix") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09sctp: get netns from asoc and ep baseXin Long
Commit 312434617cb1 ("sctp: cache netns in sctp_ep_common") set netns in asoc and ep base since they're created, and it will never change. It's a better way to get netns from asoc and ep base, comparing to calling sock_net(). This patch is to replace them. v1->v2: - no change. Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09sctp: fully initialize v4 addr in some functionsXin Long
Syzbot found a crash: BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline] BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline] BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 Call Trace: crc32_body lib/crc32.c:112 [inline] crc32_le_generic lib/crc32.c:179 [inline] __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90 crypto_shash_update+0x4c5/0x530 crypto/shash.c:107 crc32c+0x150/0x220 lib/libcrc32c.c:47 sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36 __skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640 sctp_compute_cksum include/net/sctp/checksum.h:59 [inline] sctp_packet_pack net/sctp/output.c:528 [inline] sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597 sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline] sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194 sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757 sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline] sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155 sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185 sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433 sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline] sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672 The issue was caused by transport->ipaddr set with uninit addr param, which was passed by: sctp_transport_init net/sctp/transport.c:47 [inline] sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100 sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611 sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline] where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize the padding of addr->v4. Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr) will become the part of skb, and the issue occurs. This patch is to fix it by initializing the padding of addr->v4 in sctp_v4_from_addr_param(), as well as other functions that do the similar thing, and these functions shouldn't trust that the caller initializes the memory, as Marcelo suggested. Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6: add net argument to ip6_dst_lookup_flowSabrina Dubroca
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-26net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port)Maciej Żenczykowski
Note that the sysctl write accessor functions guarantee that: net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0] invariant is maintained, and as such the max() in selinux hooks is actually spurious. ie. even though if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) { per logic is the same as if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) { it is actually functionally equivalent to: if (snum < low || snum > high) { which is equivalent to: if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) { even though the first clause is spurious. But we want to hold on to it in case we ever want to change what what inet_port_requires_bind_service() means (for example by changing it from a, by default, [0..1024) range to some sort of set). Test: builds, git 'grep inet_prot_sock' finds no other references Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-26net-sctp: replace some sock_net(sk) with just 'net'Maciej Żenczykowski
It already existed in part of the function, but move it to a higher level and use it consistently throughout. Safe since sk is never written to. Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Merge in networking bug fixes for merge window. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-23sctp: cache netns in sctp_ep_commonXin Long
This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcookNavid Emamdoost
In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated new_asoc is leaked if security_sctp_assoc_request() fails. Release it via sctp_association_free(). Fixes: 2277c7cd75e3 ("sctp: Add LSM hooks") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-08sctp: add SCTP_PEER_ADDR_THLDS_V2 sockoptXin Long
Section 7.2 of rfc7829: "Peer Address Thresholds (SCTP_PEER_ADDR_THLDS) Socket Option" extends 'struct sctp_paddrthlds' with 'spt_pathcpthld' added to allow a user to change ps_retrans per sock/asoc/transport, as other 2 paddrthlds: pf_retrans, pathmaxrxt. Note: to not break the user's program, here to support pf_retrans dump and setting by adding a new sockopt SCTP_PEER_ADDR_THLDS_V2, and a new structure sctp_paddrthlds_v2 instead of extending sctp_paddrthlds. Also, when setting ps_retrans, the value is not allowed to be greater than pf_retrans. v1->v2: - use SCTP_PEER_ADDR_THLDS_V2 to set/get pf_retrans instead, as Marcelo and David Laight suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08sctp: add support for Primary Path SwitchoverXin Long
This is a new feature defined in section 5 of rfc7829: "Primary Path Switchover". By introducing a new tunable parameter: Primary.Switchover.Max.Retrans (PSMR) The primary path will be changed to another active path when the path error counter on the old primary path exceeds PSMR, so that "the SCTP sender is allowed to continue data transmission on a new working path even when the old primary destination address becomes active again". This patch is to add this tunable parameter, 'ps_retrans' per netns, sock, asoc and transport. It also allows a user to change ps_retrans per netns by sysctl, and ps_retrans per sock/asoc/transport will be initialized with it. The check will be done in sctp_do_8_2_transport_strike() when this feature is enabled. Note this feature is disabled by initializing 'ps_retrans' per netns as 0xffff by default, and its value can't be less than 'pf_retrans' when changing by sysctl. v3->v4: - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of sysctl 'ps_retrans'. - add a new entry for ps_retrans on ip-sysctl.txt. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>